Renovation of conference room (conference room No.2) for Agri. Business Incubation Centre (ABIC) in the premises of Gandhi Bhawan at CCSHAU, Hisar. (including EI work)

Amount

Civil work 1 to 14:- Scraping {HSR 8.32 (a)} (a) White wash and colour wash

Providing and fixing false ceiling with 12 mm thick Gypsum Board fixed on M.S. steel runners frame including cost of screws angles, cleats, rawel plugs with taping, filling with Gypsum compound and applying priming coat etc. complete in all respects (HSR 13.91)

Providing and fixing mineral fibre false ceilings tiles at all hieghts of size 595 x 595 mm of approved texture, design and pattern, the tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity K = 0.052 (-) 0.057 w/m k, Fire Performance as per (BS 476 pt - 6 & 7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round gavanized iron section of 0.33 mm thick (galvanized @ 120 gsm) comprising of main T runners of 15 x 35 mm of length 3000 mm, cross T of size 600 x 600 mm suspended from celing using galvazied mild steel item (galvanizedd @ 80 gsm) 50 mm long 8 mm outerdiameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85 x 25 x 2 mm, spaced at 1200 mm centre of centre along main 'T'. The suystem should rest on periphery walls/partitions with the heop of GI perimeter wall angle of wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all hieghts, The work shall be carried out as per specifications, drawings and as per directions of the Engineer-in-charge. with or without groves (HSR 13.92)

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces (HSR 16.25)

Preparation of plastered surfaces for oil bound distemper including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to the required finish complete (HSR16.52)

Distempering with washable oil bound distemper (of approved manufacture) two coasts excluding priming coat on new work (HSR 16.57)

Providing and fixing vitrified tiles of size 600 mm x 600 mm of approved make in flooring, laid in any pattern as specified over base of adhesive of reputed brands such as Pidilite, Laticrete, Ferrouscrete & Valendure as per IS specification 15477-2004 and jointed with white cement slury mixed with pigment to match the shade of tiles. (NS) Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, JOHNSONS, RAK, ORIENT BELL AND SIMPOLO. ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this

Providing and fixing vitrified tiles of size 600 mm x 600 mm of approved make in skirting/ dado, laid in any pattern as specified over base of adhesive of reputed brands such as Pidilite, Laticrete, Ferrouscrete & Valendure as per IS specification 15477-2004 and jointed with white cement slury mixed with pigment to match the shade of tiles. (NS) Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, JOHNSONS, RAK, ORIENT BELL AND SIMPOLO. ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this.

Providing and fixing 3” thick foam of sleep well make of 40 density fixed on 3 mm thick commercial plywood (ISI mark) covered with cotton coated fabric of approved make (National/ Bohar/ Royal touch), colour and texture over existing seat (horizontal portion) of seating arrangement including corner pipine and petty materials such as steel screws, fevicol, cotton dori, thread for stitching, nails of all type and sizes, solution etc., complete in all respect as per drawing and design or as directed by Engineer-in-Charge. (NS)

Providing and fixing 2” thick foam of sleep well make of 32 density for back fixed on 3 mm thick commercial plywood (ISI mark) covered with cotton coated fabric of approved make (National/ Bohar/ Royal touch), colour and texture including corner pipine and petty materials such as steel screws, fevicol, cotton dori, thread for stitching, nails of all type and sizes, solution etc., complete in all respect as per drawing and design or as directed by Engineer-in-Charge. (NS)

Providing and fixing 2’ high wooden paneling consisting of 12 mm thick plywood and 1 mm thick laminated strips, complete (NS)

Providing and fixing acoustical treatment consisting of G.I. channel, mineral wool, hessian cloth and final layer of perforated echo board tiles, complet. (NS)

Providing and fixing wooden cabinet of size 4' x 2'-0" x 2’-6” high with locking arrangeemnt consisting of following:- i) 12 mm thick BWR grade-II plywood (ISI mark) of approved make fixed on back of cabinet. ii) 19 mm thick BWR grade-II board (ISI mark) of approved make for top, bottom, sides and interal partition (two horizontals & two verticals). iii) 30 mm thick double leaf glass shutters (4 Nos.) consisting of 4 mm thick glass pains in wooden frame/styles of commercial hardwod such hollock, champ, chikrasy, chaplas etc. with wooden beading of required size and locking arrangement. iv) 1 mm plastic laminated sheet of approved make, shade & colour on outer face. v) inner face finished with primer & paint. incljuding cost of cutting, nails, screws, bolts, iron hinges, handles, adhesive etc, compelte in all respect as per drawing & design.(NS).

Electrical work 15 to 55:- S/E of Moulded case circuit breaker on wall or on existing pedestal i/c bonding to earth and necessary connections :-{HSR 31.12 (c) (ii)} (i) 100amp to 220amp 415V 10KA 3Phase

S/E of MCBs/isolator 240/415 V in existing distribution board including making necessary connections :- {HSR 31.17 (ii)} (i) 6 to 32 amp. MCB SP

(iii) 40 to 63 amp. MCB TPN {HSR 31.17 (iii)}

Earthing with G.I earth pipe 4.5 mm long and 40 mm dia with masonry enclosures on the top etc as required. {HSR 31.22(i)}

(ii) Extra for using salt and charcoal/coke for for pipe earth electrode as required. {HSR 31.22 (ii)}

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I wire in 15 mm dia G.I. pipe from earth electrode as required. {HSR 31.22 (xii)}

S/E of underground cable loose in existing pipe or trenches complete with necessary connectons :-{HSR 31.26 (xli)} (xli) 16sqmm 4 Core Cable

S/E of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe.{HSR 31.40 (i)} (i) Cable Size 1.5 sqmm (3/0.81)

(ii) Cable Size 2.5 sqmm (3/0.81) {HSR 31.40 (ii)}

(iv) Cable Size 6 sqmm (7/1.35) {HSR 31.40 (iv)}

S/E of PVC conduit pipe ISI marked (Medium) recessed in wall / ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect. {HSR 31.44 (b)} (b) 25mm dia

S/E of copper lugs including crimping etc. upto the entire satisfaction of Engineer-in-charge of work. {HSR 31.45 (b)} (b) 4sqmm to 6 sqmm

Pdg. & fixing modular type accessoriesm of app. Make in existing box including fixing and making necessary connections complete in all respect. {HSR 31.56 (i)} (i) 10 amp. 1 way switch

(ii) 20 amp. Switch {HSR 31.56 (ii)}

(iii) 10 amp. Socket {HSR 31.56 (iii)}

(iv) 16 amp. Socket {HSR 31.56 (iv)}

(v) Fan Regulator {HSR 31.56 (v)}

(vi) Blinking plate {HSR 31.56 (vi)}

Pdg & fixig GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate with all labour and matrial required for the job. {HSR 31.57 (i)} (i) 2 Modules

(iv) 6 Modules {HSR 31.57 (iv)}

(vi) 12 Modules {HSR 31.57 (vi)}

SITC of wall / free standing floor mounting dust and vermin proof comopartmentalized cubical panel made out of 2 mm thick CRCA sheet, required hardware 3 mm thick Bkt sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted etc. (HSR 31.63)

Supplying and fixing of copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect.(HSR 31.64)

S/E of Mark double walled corrugated DWC HDPE pipe laid 1 mtr below ground level i/c digging and refilling of earth i/c cost of suitable size socket / coupler for HDPE pipe i/c the cost of labour and material required to complete the job in all respect upto entire satisfaction of EIC. {HSR 31.67 (i)} (i) HDPE Pipe 63/50mm outer dia / inner dia

SITC iof push ON/OFF type 25 A modular type motor starter switch (white color) for AC's including the cost of petty material required to complete the job upto entire satisfaction of Engineer-in-charge. (NS)

S/E of Wall mounting industrial air circulator fan 600mm sweep , 1440RPM , 180watt , air delivery 270 mm and performance conforms to IS 2997-1964 standards.USHA/Havells. (NS)

S/E of 20watt LED Light Fitting with Tube Havells Make Code No. LHEWEBP71NIW020 or equivalent Bajaj/Philiphs/Wipro Make ( Industrial ) (NS)

S/E of Propeller type AC ventalating fans ( exhaust fan ) with necessary earthing of fan complete with louver shutter , 380mm sweep 900RPM ( Heavy Duty ) Make Orient , Usha , Khaitan , Crompton (NS)

Supply, Installation, Testing and Commissioning of Interactive Flat Panel Wall Mount - Technology TFT LCD with DLED Backlit; Display size (diagonal) 86" or Higher. Aspect Ratio 16:09; Resolution 3840 x 2160 4K Ultra HD; Flicker Free Yes with Blue Light Filter; static contrast ratio 1200:1 (typ): brightness 350 nits:display clour 1.07B colours:input ports HDMI x 3:VGAx1;display portx1;audiox1;CVBS(AV);RS232x1;PC slotx2;Slotin for pc built inx1;Wifi module slot built in x 1;output port HDMI x1;audio (earphone out)x1;SPIDFx1;LAN RJ45 x1;USB3.0 type A x3;2.0 typeA x3;2.0 type B(for touch) x2 ;Speaker 16 w x2 ;Touch type :IR recognition;touch resolution:32767x32767,Touch point:20 points;writing :10 points; response time<15ms;support: windows Version:5.1;CPU:ARM quad core cortex A53 1.2Ghz;GPU ARM Mali-450 MP 4;Memory:2 GB;Storage:16GB eMMC;Networking:10/100M auto-identtification and DHCP;Anti Scratch-Anti Glare Minimum 7 H scratch resistant and anti glare ;mirror extending flexibility to allow content to be mirrored on two IFB simultanesouly through HDMI out.Save option built in save option directly to Google Drive and One Drive QR Code Scan:In Android Mode should have File download feature in smart phone just by scanning the QR code. Email: In Android juts by pressing of a icon the email should get generated and it should have facility to get the annotation/session attached as PDFautomatically. Split Screen: Should have the feature, built-in facility to split the screen in 2,3,4,5 or max.6 for simultaneous function/working on various application at the same time from a single PC. Annotation/Writing: Should be able to write on a Blank screen and on any application -PPT, Word, Excel, PDT, Web Browser, Video etc. Floating Tool: Should have floating tools which should appear just by press of 2 fingers for writing/annotation. Recording: It should also have recording function of Audio and Video. Quiz Built in Tool to allow participants to submit answwers from their Smart Phones, Zoom Video Conferencing - Built-in PC with IFP Core i5, DDR4 8GB, 2.5",128 GB SATA S3 SSD, Network: Wireless 802.11; (NS) Make: View Sonic/Samsung/Sony

S/E of recessed type 42 watt full window glare free opal difffuse LED panel of size 595x595 mm suitable for Armstrong/POP/GB ceiling with M.S. Powder coated white housing. Total system lumen of 42 watt LED should be 4600 or above in cool day light (5600k to 6500k), Power factor >0.95, CRI (Ra) >80, LED lamp efficiency ≥140 lm/w, Average life >50000hours, complete with all accessories as required with connections. (Industrial) (NS)

SITC Speaker - EN 54-24 Certified 20W wall mount speaker with excellent speech & High-fidelity music reproduction Max Power: 30W,Rated Power: 20Watts, Power Tapping:20/10/5/2.5W Effective frequency range(-10 dB) : 90 Hz to 20KHz SPL at rated power (1Khz at 1 m) 101 dB, Opening Angle 1 KHz / 4 KHz (-6 dB): 174° / 136° (hor.) 127° / 141° (ver.), Woofer :- 5 inch ; tweeter 1inch; Cabinet and front grill :- Aluminium, Operating Temp : -25°C to +55°C ; RH<95% EN60065; UL 94 V0 ; Water & Dust protection :- EN60529 IP 65 Make: Bosch / Bayerdynamics/senneheiser. (NS)

Power Mixer - SITC of Powered Mixer ideal for installs with inbuilt Class D amplifier, Max. midband output power, 1 kHz, THD = 1%, dual channel into 4 Ω :2 x 450 W into 8 Ω: 2 x 270 W , also capable of Direct-Drive option for 100V speaker lines. Frequency response, -3 dB, ref. 1 kHz,Any input to any Mixer output 15–22000 Hz.Crosstalk, 1 kHz Amplifier Ch1/Ch2 < -85 dB.5 MIC/LINE input channels with compressor / limiter and talk-over function, 3 Stereo Inputs including Jack, RCA and USB connectors, onboard player for MP3 or WAV audio files, high quality effects section with 32 editable presets, 3 Master outputs with 7-band EQ each and flexible signal routing options, delay line for Master-B (150 msec / 50m), Auxiliaries (FX, AUX) 1 Post, 1 Pre ,Input impedances MIC 2 kΩ CD 10 kΩ All other inputs > 15 kΩ, headphones control, LPN speaker processing, , comprehensive protection package, optional rack mount kit. (NS) Make: Bosch / Bayerdynamics/senneheiser

Wireless Handheld Mic - SITC of Handheld Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity < 1.0 μV,Receiver Image rejection>55dB,Receiver Dyanmic range >95dB and receiver having 32 channels possible,Receiver S/N ratio >100dB A,distortion <1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz Make: Bosch / Bayerdynamics/senneheiser. (NS)

Wireless Lapel Mic - SITC of Wireless Lapel Mic with Cardiod polar pattern for transmitter , Receiver & Transmitter frequency response 100Hz-18kHz or better,Receiver RF sensitivity < 1.0 μV,Receiver Image rejection>55dB, Receiver Dyanmic range >95dB and receiver having 32 channels possible,Receiver S/N ratio >100dB A,distortion <1 %, Transmitter sensitivity - 5.6 mV/Pa,modulation:+/-40kHz (NS) Make: Bosch / Bayerdynamics/senneheiser

Supply Installation, Testing and Commissioning of Rack : 12U Rack with accessories including the cost of all petty material required to complete the job upto the entire satisfaction of Engineer-in-charge. (NS) Make : Vpro

All types of cables (Cat-6, HDMI, XLR/microphone cable of any length) and connectors required to complete the job in all respect i.e. connectivity of podium to IFP to delegate unit and viceversa to run all the equipments in tandem.(NS) Make: Krammer/Sommer/Belden/Bosch LBB 4116/00+LBB4119/00) /Bayerdynamics/senneheiser

Providing and installing split type air conditioners, five star rating inverter type with copper coils 2.0 ton capacity ± 10%) fitted with super tropical - DC PAM inverter- return cooled - rotary compressor operating on refrigerant R-410-A suitable for wall mounting confirming to IS : 1391 (part-2)/92 (except power consumption norms) with upto date amendments, suitable for operating on 230 volts, 50 Hz single phase A.C. supply having following specifications:- (i) Cooling coil row -3 Nos. (ii) Air flow (CMH) -1450 cum/ hr. (iii) Sound level (H/M/L)- 41/38/34/25(silent mode) (iv) Louvers swing- 3D + 3D Auto etc. complete in all respect MAKE :- O General/Toshiba/Mitsubishi (Heavy Industries) (five star rating) Model as approved by the Engineer-in-Charge. (NS)

Providing and installation of automatic voltage stabilizer of 5.00 KVA capacity (heavy duty) copper wound 100 up voltatge ofV-Guard make ISI marked complete in all respect. (N.S.)

Providing and fixing extra copper tubing/regrigerent pipe for above split air conditioners (if required) consisting of inlet, outlet pipes, insulation and electric wiring etc. as per requirement, complete in all respect beyond 4.0 metres length. (NS) NOTES :- INSTALLATION OF AIR CONDITIONERS INCLUDES:- 1. Mounting/ fitting indoor and outdoor units at their respective locations 2. Providing & laying refrigerant pipe line of four metres length and beyond (if required) and connecting both the units after drilling holes in the wall, if required. Thickness of the copper tubing shall not less than 0.80 mm. 3. Insulating the suction pipe with expanded polythene pipe tubing. 4. Providing & laying drain pipe to throughout the condensate water being formed in the indoor unit 5. Leak testing entire system 6. Charging refrigerant gas in the unit 7. Electric wiring ; suitable electric wiring and switch should be provided with in 4 metres of the location of the units as per requirement 8. PVC channels for concealing the pipes etc. 9. Refrigerant piping thickness- 18 guage (1 mm) (i) Liquid line :- 6.35mm (1/4") (ii) Gas line:- 15.88mm(5/8") 10. Providing and fixing 2.5 sqmm x 4 core coper wire sheathed for connections and communication between indore unit to outdoor unit. (NS)

Providing and fixing in position powder coated MS stands for outdoor units of air conditioners including suitable nuts & bolts etc. of best quality complete in all respect (NS)

VIJAYM PROJECTS PRIVATE LIMITED