Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹9.5 L
EMD Value
₹95,399
Closing Date
21 Oct 2026, 3:00 pm3d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Chief Engineer, Kanpur Muncipal Corporation
Chief Engineer Office, Kanpur Muncipal Corporation, Motijheel, Kanpur
Under Zone-05, work of installing a tin shed on the roof and gates in the toilet, as well as interlocking, at Gandhi Memorial School
2026_NNKAN_1198096_1
587/AA-5/26-27
Open Tender
Civil Works
Fixed-rate
Ward 48
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,180
₹95,399
17 Oct 2026
17 Oct 2026
21 Oct 2026
17 Oct 2026
21 Oct 2026
17 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | 12.1-FS11001-ROOFING WORK-12.1 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch In horizontal/ vertical or curved surfaces), excluding the cost of purllns, rafters and trusses and Including cutting to size and shape wherever required.-Rate-1140.00 per 1 Sqm. | 301.08 | Sqm | 1,140 | ₹3,43,225.5 |
| 2 | 10.15.2-F10029-MILD STEEL & IRON WORK-Providing and fixing m.s. Tubular frames for doors, window, ventilators and cupboard with rectangular/L type section joints mitred and welded including fixing of neccssary butt hings and screw and applying a priming coat of approved steel primer. Fixing with carbon steel galvanlsed dash fastener of required dia and size (to be paid for separately) Providing and fixing m.s. Tubular frames for doors, window, ventilators and cupboard with rectangular/L type section joints mitred and welded including fixing of neccssary butt hings and screw and applying a priming coat of approved steel primer. Fixing with carbon steel galvanlsed dash fastener of required dia and size (to be paid for separately)-Rate-132.00 per 1 kg | 1,144.29 | kg | 132 | ₹1,51,046.28 |
| 3 | 10.31-FS10013-MILD STEEL & IRON WORK-10.31 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, Including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.-Rate-98.00 per 1 kg | 212.5 | kg | 98 | ₹20,825 |
| 4 | 5.3-FS5026-Concrete/R.C.C. Work-RCC work with cement approved coarse sand and 20mm approved stone ballast in proportion for raft foundation with 1:1.5:3 (1 cemnt 1.5 C. sand 20 mm size stone ballast) Reinforced cement concrete work In beams, suspended floors, roofs having slope up to 15• landlngs, balconies, shelves, chaDas, lintels, bands, plaln window sllls, staircases and splral stair cases above pllnth level up to floor five level, excluding the cost of centering, shuttering, finishing andreinforcement-Rate-8720.00 per 1 Cum. | 0.6 | cum | 8,720 | ₹5,232 |
| 5 | Non-Sor-F10021-MILD STEEL & IRON WORK-M.S. or iron in plain work such as hevey size as fabrication of M.S. M.S. or iron in plain work such as hevey size as fabrication of M.S.-Rate-7200.00 per 1 Qtl | 0.47 | qtl | 7,200 | ₹3,384 |
| 6 | NA-S19002-MISCELLANEOUS-Supply and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded tanks Supply and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position Including all taxes, labour and T&P etc. for proper completion of work. Tank should be ISi marked, Sintex or equivalent.-Rate-8 per 1 liters | 1,000 | liters | 8 | ₹8,000 |
| 7 | 2.1.1 (2.1.1)-FS4001-Earth Work-earth work 2.1 (2.1,1) work in surface excavation not exceeding 30 cm in depth but ceeding 1.5 m In width as well as 10 sqm on plan including getting out d disposal of excavated earth upto SO m and lift upto 1.5 m, as directed Engineer-in- Charge: 2.1.1 All kinds of soil.o 0.30 M-Rate-170 per 1 Cum. | 45 | cum | 170 | ₹7,650 |
| 8 | NA-F5042-Concrete/R.C.C. Work-Construction of granual sub base (GSB) with well graded materails in uniform layer etc all complete. Construction of granular sub base (GSB) by providing coarse graded material, spreading in uniform layer with mortor grader on prepared surface, mixing by mixin place method with rotovator at OMC and compacting with viberatory roller to achieve the desired density as per clause 401.-Rate-3676.00 per 1 Cum. | 18 | cum | 3,676 | ₹66,168 |
| 9 | MORD 1500 (6.7)-FS26009-ROAD WORK-Supply & Laying Of 80mm thick rubber moulded interlocking tiles with local sand 25-40 mm thick etc all complete. Providing and laying of Interlocking concrete Block pavement having thickness 80 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.)-Rate-925 per 1 Sqm. | 180 | sqm | 925 | ₹1,66,500 |
| 10 | 6.1.1-FS6001-BRICK WORK-Class-150 brick work in 1:4 cement, c. sand in foundation and pilnth etc all complete. Brick work with common burnt clay (non modular) bricks of class-150 in foundation and plllinth in. Cement mortar 1:4 (1 cement : 4 coarse sand)-Rate-6600.00 per 1 Cum. | 5.52 | cum | 6,600 | ₹36,432 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 7.54 MB
BOQ_2263801.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .