SPL REPAIRS TO FLOORING OF BLDG NO. W-30 STORE AT 201 ARMY AVN SQN UH, SEWAGE LINE NEAR BLDG NO. P276 AT 1631 MED BTY, AND CERTAIN REVENUE WORKS AT STN HQ, T-58 DHOBIGHAT IN AGE B R HAIG LINE AREA UNDER THE AOR OF GE DEVLALI

Amount

Excavation in trenches, n. exc. 1.50 Mtr wide and n.exc 1.50 Mtr in depth for foundation manholes etc n.exc. 10 Sqm on plan and getting out in soft/loose soil all as specified and directed.

Excavation in trenches, n. exc. 1.50 Mtr wide and n.exc 1.50 Mtr in depth for foundation manholes etc n.exc. 10 Sqm on plan and getting out in hard/dense soil all as specified and directed.

Returning and filling of soil including spreading levelling watering and well ramming in layyers n. exc 25 cm all as specified and directed.

Removing excavatd material n. exc 50 m and depositing where directed at a level n. exc 1.5 Mtr above the starting point

M&L for hardcore of broken stone gauge n. exc 63 mm deposited spread and leveled in layers n.exc 15 cm thick watered and rammed to a true surface.

M&L for cement concrete 1:5:10 type E-2 (40mm graded stone aggregagte) as in foundation filling mass concrete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (40mm graded stone aggregagte) as in foundation filling mass concrete all as specified and directed.

M & L for brickwork with flyash bricks straight or curried on plan exc 6m. Mean radius built in Cement Mortar 1:6 all as specified and directed.

M & L for brickwork with flyash bricks straight or curried on plan exc 6m. Mean radius built in Cement Mortar 1:4 all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth ( without using extra cement ) complete all as specified and as directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth ( without using extra cement ) with sagol finish on plastered surface complete all as specified and as directed.

M&L for two coats of cement base paint over newly plastered surfaces of walls including preparation of surfaces

M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over a coat of alkali resistant paint complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-1 using (20mm aggreates) set in CM 1:4 as in cover slabs (for manhole etc) & simillar articles with plain faces complete (Reinforcement will be measured and paid separatly) all as specified and directed.

Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings,benching, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed.

S & F Mild steel TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed .

M&L for 75mm thick cement concrete type C2 1:3:6 (40 mm graded stone aggregate) in plinth protection finished fair all as specified and directed .

M & L for Two coats of synthetic enamel paint over priming with red oxide over incl preparation of new steel surfaces of any description over 10 cm width or girth complete all as specified and as directed.

M&L for Non-skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, over and incl. 15mm screed bed in CM 1:6 as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

M&L for Glazed ceramic coloured tiles of size. 300x450x5 to 6mm thick on vertical surfaces of walls such as skirting dado etc over and incl. 10mm thick screed bed in Cement Mortar 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S & F Vitreous china wash down water closet pan ( pedestal pattern ) white ( excluding fixing bolt, flushing cistern and flush pipe ) complete all as specified and directed.

M & L for 75 mm dia outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cementcomplete all as specified and directed.

M&L for 150mm Slat-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone agg) as in concrete bed to drain pipe 150 mm bore including packing under and huaunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M & L for solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F in repair factory made solid PVC Moulded door shutter,28 to 30mm thick stiles with 2,4, or 6 raised panel design with 5 mm thick moulded PVC sheet on the front face & 5mm plain colour PVC sheet on back face,supplying and fixing in frame at site as per specification and drawing.

S & F MS butt hinges 100mm size medium grade

S & F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250mm long, all as specified and directed.

S & F Aluminium, anodised, barrel tower bolts of extruded section and fixed 150mm, all as specified and directed .

S & F Aluminium handles, cast type, anodised, 125 mm long complete, all as specified and directed.

S&F steel ventiliter with top hung shutter incl hinges steel peg stay etc. complete all as specified and directed.

S&F frosted glass 4.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S & F powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Min Tee runners of size 38mm x 38mm x 1.5mm and cross Tee of size 25mm x 25mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm complete all as specified and as directed.

M & L for 4mm thick non asbestos fibre cement building boards of make 'E board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework with complete all as specified and as directed.

S&F valveless syphonic action type flushing cistern low level white 10 Litre capacity with inlet ball valve float and handle including CI brackets.

S&F PVC connection 15mm size with PTMT nut of length 450mm

S&F vitreous china wash basin white, flat back 630 x 450 mm excluding taps, waste coupling and plug and porcelain stopper (but incl. brackets) fixed in repairs.

S&F plastic water closet seat black/white in colour & cover and mild steel chromium plated or aluminium hinging device for pedestal pan WC/Anglo indian type incl all fixtures for fixing

S&F PVC (SWR) Pipes 75 mm bore with rubber ring joints laid in floors or on walls or laid in trenches.

S&F 110mm bore PVC(SWR) pipes single socketed in any length wilth rubber ring joints laid in floor or on walls complete all as specified

S&F PVC (SWR) junction single (single T) equal or unequal of 75mm bore as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal of 110mm bore.

S&F PVC(SWR) vent cowl as specified of dia 75mm bore.

S&F PVC(SWR) vent cowl as specified of dia 110mm bore.

S & F in repairs waste coupling PTMT screwed down for 32 mm/40 mm bore PVC/steel down pipe as specified and directed.

S&F tubular towel rail 20 mm dia of brass chromium plated D type, 60 cm long between flanges all as specified and directed.

S&F in repair PVC water jet of 600mm long 15mm bore for pedestial pattern water closet of all as specified and directed.

S&F chromium plated shower roses with swivel joints 125 mm dia size incl fixing to GI pipe/union fixed in repairs.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)

S&F Soap dish, vitreous China white, approximate size 160x160x90mm all as specified and directed.

S&F Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern

S & F mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt weided tubes conforming ti I.S 1161-1998 grade St 240 complete all as specified and directed.

S&F GI water tubing 20mm bore medium grade, laid in floors or on walls

S&F GI water tubing 15 mm bore medium grade, laid in floors or on walls

S&F bib tap cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule and fixed 15mm dia

S&F stop valve, 15mm bore dia, cast copper alloy screwed down, high pressure with clutch or butterfly handle, screwed both end for iron pipe or for union as directed etc completed all as specified and directed.

S & F, 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated with fancy type, screwed down high pressure, with or without lettered 'Hot' or ' Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and directed.

M&L for 20mm Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed

S&F rotational moulded polythylene water storage tank 1000ltre capacity (cylindrical/vertical with close stop) two layered Hoisted and fixed in position all as specified in SSR Part 1

Excavation in post holes (or similar holes) in any type of soil each n.exc 0.5 cum getting out, returning , filling in and ramming earth or broken rubble mixed with earth around , in layers n.exc 25 cm , watering and removing surplus soil to a distance distance n.exc 50 m and making good the surface as directed by the Engr-in- Charge.

M&L PCC 1:2:4 type B2 ( using 40mm graded agg) in foundation, filling and mass concrete etc all as specified and directed.

Supply only chain link MS galvanized fencing of any size or type complete all as specified and as directed.

S & F mild steel bolt screwed one end with hexagonal or square nuts & washers the other end enlarged not exc 15cm long dia of neck 12mm complete all as specified and as directed.

S & F flat iron and tongue bars including securing bolts, posts and struts in fencing including cutting top to shape directed, drilling holes, notching for wire etc including all necessary drilling or reveting etc and similar works

M&L for 10mm dia MS Round bars as in support of Chain Link Fencing.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire

S & F galvanized 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing & straining & fixing to any type of standards rails straining bolts including securing or tying at crossing with & provn of galvanized mild steel wire complete all as specified and as directed. (Each line wire to be measured)

S & F mild steel work angle as in posts and struts in fencing posts inl cutting tops to sage as directed, drilling holes, notching for wire etc incl all necessary drilling, bolting etc and similar works conforming to Fe-410-0 or Fe310-0 complete all complete all as specified and directed.

S&F Mild steel framed work such as ornamental type gate grills, gratings etc, with ends of bars shouldered and / or riveted or forced in spikes and similar works conforming to Fe-290 Gde-E-165 for portion framed and hung as gates including plntle hinges , stop , hand -made sliding bolts , etc for ornamental and intricate designincluding structrual steel is painted one shop coat of zinc chromate primer paint (incl prepration of surface) all as specified and directed

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

All as per item No. 73 above but as in skirting over and incl. 10mm thick backing coat in CM (1:4).

M&L for precast cement concrete interlocking tiles 60 mm thick, Rubber moulded and incl. with strength 30 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed.

Demolition of brickwork of stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 30mm thick PCC 1:2:4 Type B1 with 20mm graded stone aggregate as in levelling course in floor complete all as specified and directed.

Demolition and breaking up 100mm internal dia pipe drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

Demolition and breaking up 150mm internal dia pipe drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

M&L for 100mm internal dia Slat-glazed stoneware drain pipes laid in trenches and jointed all as specified and directed.

M&L for 150mm bore Reinforced cement concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D-2, bed to 100mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed.

S&F mild steel TMT bars 8mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping columns, hooking ends & binding with & including MS wire (annealed) not less than 0.9mm dia of or securing with clips complete all as specified and as directed.

Material and labour for point wiring with stranded copper conductor Cable PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including in PVC conduit of suitable size In stone wall with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow,Tee,collers bend, PVC conduit for crossing etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core sheathed cable continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for :-

(a) One light point controlled by one switch with cable 1.5Sqmm Size

(b) One fan point controlled by one switch with cable 1.5sqmm size

(c ) One 5 pin socket outlet 5 Amps on the same board.

(d) One 5 pin socket outlet. 5 Amps on the independent board.

Supply and fix modular switch one way 6A ,1 module complete all as specified and directed.

Supply and fixing Socket 6A-2/3 pin combined 2 module complete all aspecified and directed.

Supply and fixing Modular White cover plate with frame,3 Module

Supply and fixing Modular White cover plate with frame,8 Module

Supply and fixing Modular Metal flush box 3 module

Supply and fixing Modular Metal flush box 8 module

S&F Surface and wall mounted LED Fitting with Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 20W LED Fitting Make:-Havells E-LITE LED PRIDE PLUS NEO Cat Part Num :-LHEXACP7INIW020 or equivalent in Philips /bajaj/wipro

Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

S&F Sheet Metal enclosure for SPN DBs, 4 Ways, Double Door (IP-43), built in bus bars complete suitable for 240 Volts, AC, 50 Hz complete all as specified and as directed Make: L&T ( Cat No:-DBSPN004DD)/ Legrand / siemens / ABB

Supply and fix in repair MCB SP 5 to 32 Amps,240Volts complete all as specified and as directed

Supply and fix in repair MCB SPN 32 to 40 Amps,240Volts complete all as specified and as directed.

Supply & fixing/ Install new Exhaust fan Heavy Duty, Gray Colour, 1400 RPM, Size 300 mm Metal Body type with complete accessories all as specified and directed . Make : Havells Model:- Turbo Force or equivalent in Crompton/Khaitan /Usha /Bajaj

Supply, Laying , jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection complete all as specified and directed of sizes

(a) 6 Sqmm 2 Core

M&L Dry sand , filling in trenches around under ground cable for cushioning complete all as specified and directed. Note :- Punned down thickness shall be measured.

M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed.

S&F Building security light fittings, with deep down aluminium housing, suitable for 20 W LED, complete pre-wired, incl suitable bracket all as specified and as directed. Make:-Havells, Philips/bajaj/wipro

S & F in replacement of lamp angle/batten holder Bakelite complete all as specified and as directed .

Supply & fix for steel water tubing of 20 mm bore pipe ''medium grade including all fitting complete to wall and ceiling or laid in floors complete.

M&L for cutting the existing GI pipe line of any size and insert GI tee of suitable size for branch connection

S&F Gun metal globe or gate valves, with iron wheel head, screwed both end for iron pipe of size 20 mm bore

Note: Amount of sch of credit of Rs. 11,228.50/- will be deducted from total amount of BOQ.

Alpha Construction

M/s. JBSR ENTERPRISES.

M/S Chandan Construction Company

JEET CONSTRUCTIONS CO.

M/S B R BHALERAO

M/s Lakhanpal construction company

M/S MANISH CONSTRUCTION CO

M/S SAMEER SUBHASH PATANI

Nilesh Enterprises

SHYAM CONSTRUCTION

Vinod Enterprises