CA NO. GE AF NO.1/GUR-07/2023-24 REPAIR TO LEAKAGE/ SEEPAGE FROM WALL AND SUNKEN SLAB AND OTHER ASSOCIATED WORKS IN BLDG NO P-149 TO P-153 CERTAIN QTRS OF OFFICERS ENCLAVE IN SEKHON VIHAR AREA AT AF STN PALAM UNDER GE (AF) GURGAON NO 01

Amount

Dismantling of floor, hearth or wall tiling including cement morter bedding (but not backing), removing serviceable tiles from sites and rubbish off the premises complete all as specified and directed.

Demolition of Cement Concrete (un-reinforced) of any description, not exc. 150mm thickness (above or below Ground Level) and removing the same from Site(s), complete all as specified and as directed.

M&L for 20 mm thick rendering in CM 1:4 by on brick/concrete surfaces of sunken slab, mixed with liquid water proofing compound both floor and wall of sunken slab, the surface shall be cured and allow to dry, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L applying evenly two coat cementious/liquid waterproofing coating on sunken slab/ceiling/wall as per manufacturer instructions including cleaning surface complete all as specified. Make :- Doctor Fixit/ SIKA/FOSROC/STP/CHOKSEY CHEMICAL/APURVA INDIA/BOSTIK INDIA/STP/MARUTI BITUMEN.

M&L for PCC 1:5:10 type E2 Using 40mm graded stone aggregate as in filling under floor/sunken slab complete all as specified and as directed.

M&L plain cement concrete type B1,1:2:4 (20mm Graded Stone Aggregate) 25 mm thick, as in Floors, etc., and finished the Cement Concrete Surfaces Even and fair with using Extra Cement, complete all as specified and as directed.

M&L for Ceramic coloured/ printed non-skid tiles of size 7-8 mm thick( square / rectangular ) area of each tile exceeding 0.06 Sqm but n. exec. 0.11 Sqm laid as in floors setting and jointed with neat cement slurry over & including 15 mm thick screed bedding layers of cement sand mortar ( 1:4) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed.

M&L Glazed Ceramic Coloured Tiles, 200x300mm to 8mm in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick screed bed in cement mortar 1:4 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

M&L for 20mm thick pre polished granite (any colour) slab laid with 15 mm thick CM 1:4 bedding in door Chowkhat/Frame, Window Cill, plateform etc in floor and skirting/dado surface and jointed with grey cement slurry and pointed in white cement with pigment to match the shade of granite stone including Moulding/rounding and polishing all as specified and directed by Engr-in-charge

M&L for cutting of seepage effected area near NT floor and Wall joint of pipe and applying cement paste mixed with RBR compound (Roff Bond Repair) mixed in ratio as per manufacturers instructions to stop the seepage, applied in sides of Nahni trap/floor traps, W.C traps, junction of pipes, bends & similar item/joints/ junctions to eliminate the seepage at the wall area n.exc 1.5 Sqm Each complete all as specified and as directed by Engr in Charge.

S&F Galvanised Steel Water Tubing 15mm Bore (dia), ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situ-ation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections, etc., complete all as specified and as directed.

S&F Galvanised Steel Water Tubing 20mm Bore (dia), ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situ-ation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections, etc. complete all as specified and as directed.

S&F Galvanised Steel Water Tubing 25mm Bore (dia), ‘Medium Grade’ with all ISI marked Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections, etc. complete all as specified and as directed.

S&F Galvanised Steel Water Tubing 32 mm Bore (dia), ‘Medium Grade’ with all ISI marked Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections, etc. complete all as specified and as directed.

S&F centre hole Brass CP mixer for mixing hot & cold WHB Mixer 15mm Bore (dia) screwed down for iron pipe and fixed including Taking down unserviceable WHB Mixer of any description, complete as all specified and directed. (MAKE : MARC/JAGUAR/PRIMA/SONA/GEM or equivalent out of makes specified in list of makes).

S&F Wall Mixer for kitchen sink 15mm Bore (dia) brass chromium plated for mixing hot & cold, as Approved, fixing including Taking down unserviceable Wall Mixer of any description, complete as all specified and directed.(MAKE : MARC/JAGUAR/PRIMA/SONA/GEM or equivalent out of makes specified in list of makes).

S&F Wall Mixer 15mm Bore (dia) brass chromium plated for mixing hot & cold, as Approved, fixing including Taking down unserviceable Wall Mixer of any description, complete as all specified and directed.(MAKE : MARC/JAGUAR/PRIMA/SONA/GEM or equivalent out of makes specified in list of makes).

Taking down and refixing of old Mixer Valve (Wall Mixer/Wash Basin Mixer/Kitchen sink Mixer) after repairing/replacement of Water pipe line in same or different locationcomplete as all specified and directed.

S&F Brass CP fancy type Bib Cock 15mm Bore (dia), Chromium Plated Long Body, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs, complete all as specified and as directed. Make :- Cera, Johnsen, jaugar, Marc.

Taking down and refixing of old Brass CP fancy Bib Cock 15mm Bore (dia), Chromium Plated Long Body after repairing/replacement of Water pipe line in same or different locationcomplete as all specified and directed.

S&F Angle Stop Cock 15mm Bore (dia), fancy type,Chromium Plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs complete all as specified and as directed. Make :- Cat No PSP-504 of Prima/ARG-404 of Coronet or Equivalent of Cera/Johnsen/Jaguar/Marc.

Taking down and refixing of old angle stop cock 15 mm bore (dia) after repairing/replacement of Water pipe line in same or different locationcomplete as all specified and directed.

S&F Brass CP Health Faucet with 1.00m long tube and holder as Approved, including Taking down un serviceable Health Faucet of any description, complete as all specified and directed. Make :- Cera/Johnsen/Marc.

Taking down and refixing of old Brass CP Health Fauced wth 1.00m long tube and holder 15 mm bore (dia) after repairing/replacement of Water pipe line in same or different locationcomplete as all specified and directed.

S&F SS Chromium Plated Towel Rail 600mm Long and 20mm dia, as Approved, fixed including Taking down un serviceable Towel Rail of any description, complete as all specified and directed. Make :- Cera/Johnsen/jaugar/Marc.

Taking down and refixing of old SS Chromium Plated Towel Rail 600mm Long and 20mm dia after repairing same or different locationcomplete as all specified and directed.

S&F stop valve CP 15mm bore(Concealed type), cast copper alloy, screwed down, high pressure with long shank or butterfly handle screwed both ends for iron pipe or union and fixed in repairs complete all as specified and as directed. Make :- Cera, Johnsen, jaugar, Marc.

Taking down and refixing of old stop valve CP 15mm bore(Concealed type), cast copper alloy, screwed down, high pressure with long shank or butterfly handle screwed both ends for iron pipe or union replacement of Water pipe line in same or different locationcomplete as all specified and directed.

M&L Vitreous China White Wash down Water Closet Pan (Pedestal Pattern) including Bolts, (excluding Flushing Cistern and Flushing Pipe) with white Plastic Seat cover, with Recessed Bottom closed pattern and Cover including Mild Steel Chromium Plated Aluminium Hanging Device and fixed-in-repairs, including Making Good disturbed Surfaces with Cement Mortar 1:3, complete all as specified and as directed. (Make :- CERA/PARRY WARE/HINDWARE or equivalent)

Taking down and refixing old Vitreous China White Wash down Water Closet Pan (Pedestal Pattern) including Bolts, (excluding Flushing Cistern and Flushing Pipe) with white Plastic Seat cover, with Recessed Bottom closed pattern and Cover including Mild Steel Chromium Plated Aluminium Hanging Device and fixed-in-repairs, including Making Good disturbed Surfaces with Cement Mortar 1:3, complete all as specified and as directed.

M&L Vitreous China White Wash down Water Closet Pan (Wall mounted type) including Bolts, (including Flushing Cistern and Flushing Pipe) integrated type with white Plastic Seat cover, and Cover including Mild Steel Chromium Plated Aluminium Hanging Device fixed-in-repairs, including Making Good disturbed Surfaces with Cement Mortar 1:3, complete all as specified and as directed. (Make :- CERA/PARRY WARE/HINDWARE or equivalent)

Taking down and Fixing only in repairs Vitreous China White Wash down Water Closet Pan (Wall mounted type) including Bolts, (including Flushing Cistern and Flushing Pipe) integrated type with white Plastic Seat cover, and Cover including Mild Steel Chromium Plated Aluminium Hanging Device fixed-in-repairs, including Making Good disturbed Surfaces with Cement Mortar 1:3, complete all as specified and as directed. (Make :- CERA/PARRY WARE/HINDWARE or equivalent)

S & F in repairs Vitreous China Anglo Indian Pattern, size 580X440 mm White, with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan excluding Flushing Cistern and Flush Pipe), fixing with and including provision of 150mm thick cement concrete Bedding including Taking out unservice able WC Pan and connected Items, complete all as specified and as directed.

Fixing only in in repairs Vitreous China Anglo Indian Pattern, size 580X440 mm White, with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan excluding Flushing Cistern and Flush Pipe), fixing with and including provision of 150mm thick cement concrete Bedding including Taking out unservice able WC Pan and connected Items, complete all as specified and as directed.

S&F PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including a Pair of Cast Iron Brackets duly Painted/Erecting Stand and PVC connection pipe 15mm size, PVC Flush Pipe of polythene 32mm dia for Low Level Flushing Cistern including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out Unserviceable Flushing Cistern and connected Items, complete all as specified and as directed.

Fixing only in repairs of old PVC Flushing Cistern including replacement of Ball Valve, Float and Handle including connection to pipe, PVC Flush Pipe of polythene 32mm dia and fixed including Taking down cleaning of scaling etc, complete all as specified and as directed.

S&F in repairs Vitreous China 550*400mm Size Oval Shaped Wash Hand Basin White with Granite Counter Top supported with 40mm thick Cudappah Stone horizontal and vertical Stone of Suitable Size including vertical granite Strip with Moulding/Rounding on exposed edges, with 32mm dia Brass Chromium Plated Waste Fitting, including Cutting Chase cutting in wall and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down Unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed.

S & F in repairs Wash Hand Basin any size, including replacement of old 32mm dia Brass Chromium Plated Waste Fitting, Brass CP Bottle trap, including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed complete all as specified and as directed.

S&F in repair 32 mm bore chromium plated bottle trap for wash hand basin with inlet & outlet screwed for iron pipes or connection including necessary packing , union and cap complete all as specified and as directed by Engineer-in-Charge.

Fixing only in repairs old 32 mm bore chromium plated bottle trap for wash hand basin with inlet & outlet screwed for iron pipes or connection including necessary packing , union and cap complete all as specified and as directed by Engineer-in-Charge.

S&F in repair, 6mm thick glass corner shelf (12"x12") with C type Brass CP bracket, complete all as specified and directed by Engr in charge. Cat No-ES03A of Make-Nixo/Hilife or equivalent out of makes specified in list of makes.

Fixing only in repair , 6mm thick glass corner shelf (12"x12") with C type Brass CP bracket, complete all as specified and directed by Engr in charge. Cat No-ES03A of Make-Nixo/Hilife or equivalent out of makes specified in list of makes.

S&F High pressure PVC connections pipe 600mm long suitable for Hot and Cold water for 15mm size with Brass CP Check nut complete all as specified and directed by Engr-in-Charge.

Dismantling of old existing PVC/CI/concrete pipes of any description, jointed in cement mortar up to 100 mm dia and removing from site complete all as specified and as directed.

S&F in repair 110mm dia PVC SWR pipe laid to wall and floor and fixed with clamp complete all as specified and as directed.

S&F in repair 75mm dia PVC SWR pipe laid to wall and floor and fixed with clamp complete all as specified and as directed.

S&F in repair 32mm dia PVC SWR pipe laid to wall and floor and fixed with clamp complete all as specified and as directed.

S&F in repair 32mm dia PVC SWR Bend complete all as specified and as directed.

S&F in repair 75mm dia PVC SWR Bend complete all as specified and as directed.

S&F in repair 110mm dia PVC SWR Bend complete all as specified and as directed.

S&F in repair 75mm dia PVC SWR Junction Single (Tee) complete all as specified and as directed.

S&F in repair 110mm dia PVC SWR Junction Single (Tee) complete all as specified and as directed.

S&F 500 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old water tank complete all as specified and directed by Engr-in-charge .

S&F (HDPE) water storage LOFT Tank 200 Ltrs capacity in kitchen, hoisted and fixed in position all specified in MES Schedule Part-I, including tank nipple, union and lowering of unservicable Water Storage Tank including dismantling of old water tank complete all as specified and as directed by Engineer-in-Charge

S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 15 mm bore complete all as specified and directed by Engineer in charge.

S&F 20 mm Bore gun metalGlobe/Gate valves with iron wheel/Lever half turn fixed-in-repairs complete all as specified and as directed by Engineer in charge.

S&F 25 mm Bore gun metalGlobe/Gate valves with iron wheel/Lever half turn fixed-in-repairs complete all as specified and as directed by Engineer in charge.

S&F 32 mm Bore gun metalGlobe/Gate valves with iron wheel/Lever half turn fixed-in-repairs complete all as specified and as directed by Engineer in charge.

S&F for Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 15 mm bore and fixed as in repair complete all as specified and directed by Engineer-in-Charge : Make-SANT/KARTAR/Leader

M&L for 6mm thick Plywood 6mm thick, BWR Grade, type BB fixed with Screw including taking down old plywood of any description in the wall etc including two coat synthetic enamel paint over a coat of primer complete all as specified and as directed .

S&F in repairs aluminum door seal fixed to bottom of door shutters complete all as specified by engr in charge

S&F in repairs toilet paper holder of stainless steel fixed to wall with CP brass screws complete all as specified and as directed by the Engineer in Charge.

Taking down and refixng old Toilet paper holder of stainless steel fixed to wall with CP brass screws complete all as specified and as directed by the Engineer in Charge.

S&F repairs brass phase with washer including removing old unserviceable phase and fixing in old serviceable Taps ,angle cock Mixer Valve and Piller tape complete suitable for 15mm bore bib taps angle cock Piller tap/Mixer Valves and make leak proof all as specified and as directed.

S&F repairs brass phase with washer including removing old unserviceable phase and fixing in old Taps and Valves complete suitable for 15mm bore bib tab/stop cock and make leak proof all as specified and as directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 1040 x 460mm bowl size 410mm x 330mm x 160mm all as specified and as directed.

S&F in repair, CP brass soap dish, complete all as specified and directed by Engr in charge. Cat No-AT03 of Make-Nixo/Hilife or equivalent out of makes specified in list of makes.

S&F in repair grating round /circular with waste hole or without waste hole of dia 75mm/ 100mm size of stainless steel complete all as specified and as directed by the Engineer in Charge.

S&F as in repair over head shower 120 mm dia/150mm square size cast copper alloy, chromium plated, fancy type, with swivel joint fixed to 15 mm bore iron pipe complete all as specified and directed by Engineer-in-Charge Make - Jaquar/GEM/Parko/Soma.

S&F in repair waste cupling fitting brass chromium plated of 32 mm dia for wash hand basin with long screwed sanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair waste cupling fitting 75/100 mm size for 40/32 mm dia waste pipe for SS sink with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.

Taking down Cement Plaster from wall and ceiling of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed.

M&L for 10 mm thick rendering in CM 1:3 on concrete/gunniting surfaces as in ceiling mixed with integral water proofing compound , the surface shall be cured and allow to dry, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately..

M&L for 15 mm thick rendering in CM 1:6 on brick/concrete surfaces of wall, mixed with integral water proofing compound, the surface shall be cured and allow to dry, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately.

M&L for preparation of newly plastered surfaces of walls by Vacuum based sanding machine complete all as specified, applying wall care putty upto 1mm thick as required (multi purpose mixer shall be used for uniform and proper mixing of putty) and applying two coats oil emulsion distemper white or coloured over a coat of approved primer by auto roller complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of newely plastered ceiling surface and applying two coats of OBD over a coat of primer complete and all as specified and as directed

M&L for preparation of newely plastered surface of walls and applying two coats of OBD over a coat of primer complete and all as specified and as directed

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping, benching, bed block for rungs, window cills etc complete all as specified and directed by Engr-in-charge

M&L for preparation of plastered or un plastered old decorated surfaces of walls by Vacuum based sanding machine all as specified, removal of nails etc & filling cracks/hole by applying wall care putty (multi purpose mixer shall be used for uniform and proper mixing of putty) and applying one coat oil emulsion distemper white or coloured by auto roller complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of plastered or un plastered old decorated surfaces of ceiling by Vacuum based sanding machine all as specified, filling cracks/hole by applying wall care putty and applying one coat oil emulsion distemper white or coloured by auto roller complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old painted surfaces of steel & steel based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Removal of debris/malwa to a distance exc 10 Km but n exc 15.00 Km out side MD land and filling in low lying area.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each all as specified and as directed.

Taking down shutters only exc 1 Sqm and n.exc. 2 Sqm each complete all as specified and as directed.

Taking down Shutters of any description exc 1 sq. m and n.exc 2sqm each refixing in other poening after adjustment complete all as specified and as directed.

S&F PVC door frame of size 50x47mm with a wall thickness of 5mm made out of extruded 5mm rigid prelaminated PVC foam sheet mite cut at two corners and jointing with 2 Nos of 150mm long brackets of 15x15mm MS square tube of two vertical door profiles are to be reinforced with 19x19mm MS square tube of 19 guage WPDM rubber gasket weather seal tobe provided throughout frame the door frame shal be fixed to the wall using 100mm long MS screws through the frame by using PVC fastners. A minimum of 04 Nos screws to be provided for each vertical members and minimum 02 Nos of horizontal members,Make:-Rajshri,Sintex or Equivalent.

S&F for 30mm thick factory made solid panel prelaminated PVC door shutter consisting of frame made out of MS tube of 19 guage thickness and size of 19x19mm for styes and 15x15mm for topo and bottom rails. MS frame shall have a coat of steel primer of approved make and manufacturer. MS frame adhered with 5mm thick heat moulded PVC `L' channel of size 30x75mm forming styles and 5mm thick, 100mm wide PVC sheet for top rail lock rail and bottom rail on either side and 5mm thick 20mm wide PVC sheet as gap inserted for top rail and bottom rail. panelling of 5mm PVC sheet to be fitted in MS frame to the styles and rails with 5mm thick 30mm wide PVC sheet beading on either side and jointed together with solvent cement adhesive etc Complete all as specified and as directed by Engineer- in- Charge.

S&F SS medium weight butt hinge ISI Marked 100mm size, fixed with screw complete all as specified and as directed.

S&F extruded anodised aluminum alloy handle 150mm long fabricated type complete all as specified and as directed.

S&F anodised aluminum barrel tower bolt of extruded section 150mm long complete all as specified and as directed.

M&L for replacement of 75mm outlet PVC(SWR) floor/nahani trap with steel grating including jointing and breaking/ dismantling any type of floor and making good cement concrete to the B-1 (1:2:4) and testing after repairs and taking down existing trap etc complete all as specified and directed by Engr-in-Charge

Note:- The amount of Rs 50050/- against Schedule of Credit on Page No 146 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance

Sumit Enterprises

B S R Enterprises

GIR RAJ BUILDERS

M/S RK Builders

PAWAN KUMAR

M/S Parshant Associates

SM CONSTRUCTION COMPANY

S.R. Constructions