Jaitpura thane se hote hue chhohara chaumuhani se hote hue GT road tak sadak avm nali nirman karya

Dismantaling of existing cement concret floor/ramp same as per mord specification4/2.5i (b) Manual means.

Earthwork in cutting /Filling in Imbankment in ordinary soil excavation to be the form of regular pits not exceeding 1/2 meter (20") in depth and earth work in enbankment to be in 20cm (8") layers, including ramming and dressing the surface to required levels and slopes and also including 1.5m (5") lift and 30m (100') lead. the earth form by cartege up to 6km distance as directed by the E/I. S.I. No 253 Analysis

disposal of wastage up to 8 km of distance

Supply and filling Brick Bats of OBB/ class-150 to raise the KC drain level SI no.2C ch1

Providing, laying, spreading and compacting stone aggregateds of specific sizes 22.4-53 mm.size to wate bound macadam specifiation including spreading in uniform thickness hand packing rolling with smooth three wheel roller 80-100 tonnes in stages to proper grade and camber applying and grooming requisite type of screening/binding material type B. 11.2 mm to fillup the inter stices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405.

Providing and applying primer coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg per sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with Emulsion RS1 using distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects

M-150 brick work in 1:4 Cement and sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of work. S.I. No-305

12mm thick plaster with cement mortar consisting of 1:4cement and sand of 1.25FM supply of all material ,labour and T&Petc .required for proper complition of the work Sino.584