Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.9 LAccepted-Finance | L1 | Accepted-Finance OK | |
| 2 | L2₹28.7 L+₹84,268.80 (3.03%)Accepted-Finance | L2 | Accepted-Finance OK | |
| 3 | L3₹32.2 L+₹4.3 L (15.5%)Accepted-Finance | L3 | Accepted-Finance OK | |
| 4 | L4₹32.4 L+₹4.5 L (16.2%)Accepted-Finance | L4 | Accepted-Finance OK | |
| 5 | L5₹32.6 L+₹4.7 L (16.9%)Accepted-Finance | L5 | Accepted-Finance OK |
| Sl No | Description | Qty | Unit | M/S VERMA BUILDER L6 | a.k constructions L2 | POONAM ENTERPRISES L4 | V M CONSTRUCTION L7 | M/S GR construction compony L12 | MS BUILDTECH L3 | M/S MSD & Associate L9 | Lamba Enterprises L10 | M/s SAAR ENGINEERS L8 | M/S MANINDER CONSTRUCTION CO. L1 | M/S SIMRAN CONSTRUCTION CO L11 | Anandeshwar Enterprises L13 | SURESH KUMAR SHARMA & CO L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of brick work built in cement or cement lime mortar of any description including quoins,arches,pillars,etc complete all as specified and directed by Engineer-in-charge. | 20 | Cum | 300 ₹6,000 | 90 ₹1,800 Lowest | 100 ₹2,000 | 200 ₹4,000 | 200 ₹4,000 | 150 ₹3,000 | 210 ₹4,200 | 120 ₹2,400 | 150 ₹3,000 | 200 ₹4,000 | 222 ₹4,440 | 100 ₹2,000 | 100 ₹2,000 |
| 2.00 | M & L for brick work with Cement Mortar1:6 using sub class 'B' bricks,old size , straight or curved on plan exceeding 6 m mean radius complete all as specified and directed by Engineer-in-charge. | 8 | Cum | 3,000 ₹24,000 | 2,500 ₹20,000 | 4,000 ₹32,000 | 3,400 ₹27,200 | 3,500 ₹28,000 | 2,900 ₹23,200 | 4,000 ₹32,000 | 2,540 ₹20,320 | 4,555 ₹36,440 | 2,000 ₹16,000 Lowest | 3,999 ₹31,992 | 3,000 ₹24,000 | 2,500 ₹20,000 |
| 3.00 | all as per Slr item no 2 above but except bricks | 12 | Cum | 1,800 ₹21,600 | 1,000 ₹12,000 | 1,000 ₹12,000 | 1,500 ₹18,000 | 1,500 ₹18,000 | 2,300 ₹27,600 | 1,400 ₹16,800 | 850 ₹10,200 Lowest | 1,999 ₹23,988 | 2,000 ₹24,000 | 1,777 ₹21,324 | 1,200 ₹14,400 | 950 ₹11,400 |
| 4.00 | Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc complete all as specified and directed by Engineer-in-charge. | 3,300 | Sqm | 20 ₹66,000 | 10 ₹33,000 | 10 ₹33,000 | 12 ₹39,600 | 30 ₹99,000 | 10 ₹33,000 | 4 ₹13,200 Lowest | 5 ₹16,500 | 8 ₹26,400 | 15 ₹49,500 | 8 ₹26,400 | 5 ₹16,500 | 7 ₹23,100 |
| 5.00 | M&L for rendering 15mm thick in CM 1:4 on fair faces or other than fair faces of brick work or concrete surfaces firnished even and smooth without using extra cement up to hieght of four storey bldg ,including scaffolding complete all as specified and directed by Engineer-in-charge.. | 3,400 | Sqm | 110 ₹3,74,000 | 90 ₹3,06,000 | 120 ₹4,08,000 | 160 ₹5,44,000 | 150 ₹5,10,000 | 149 ₹5,06,600 | 203 ₹6,90,200 | 145 ₹4,93,000 | 145 ₹4,93,000 | 60 ₹2,04,000 Lowest | 124 ₹4,21,600 | 160 ₹5,44,000 | 145 ₹4,93,000 |
| 6.00 | M&L for rendering 10mm thick in CM 1:6 on fair faces or other than fair faces of brick work or concrete surfaces of walls firnished even and smooth without using extra cement in two storey bldg complete all as specified and directed by Engineer-in-charge. | 200 | Sqm | 140 ₹28,000 | 90 ₹18,000 | 120 ₹24,000 | 150 ₹30,000 | 150 ₹30,000 | 139 ₹27,800 | 201 ₹40,200 | 145 ₹29,000 | 140 ₹28,000 | 80 ₹16,000 Lowest | 122 ₹24,400 | 155 ₹31,000 | 140 ₹28,000 |
| 7.00 | M&L for 5mm thick rendering in cement mortar 1:3 finished even and smoothe surface without using extra cement on ceiling complete all as specified and directed by Engineer-in-charge. | 100 | Sqm | 150 ₹15,000 | 100 ₹10,000 Lowest | 120 ₹12,000 | 200 ₹20,000 | 150 ₹15,000 | 139 ₹13,900 | 190 ₹19,000 | 145 ₹14,500 | 220 ₹22,000 | 100 ₹10,000 Lowest | 188 ₹18,800 | 120 ₹12,000 | 140 ₹14,000 |
| 8.00 | M & L for applying two coats of cement base paint over one coat of primer on newly plastered surfaces(external) of walls including preparation of new surfaces up to hieght of four storey bldg ,including scaffolding complete all as specified and directed by Engineer-in-charge.. | 3,400 | Sqm | 25 ₹85,000 | 20 ₹68,000 | 25 ₹85,000 | 35 ₹1,19,000 | 38 ₹1,29,200 | 23 ₹78,200 | 23 ₹78,200 | 19 ₹64,600 Lowest | 27 ₹91,800 | 38 ₹1,29,200 | 22 ₹74,800 | 25 ₹85,000 | 22 ₹74,800 |
| 9.00 | M & L for applying two coats of oil bond destember over one coat of birla white wall care putty on newly plastered surfaces(internal) of walls complete all as specified and directed by Engineer-in-charge. | 200 | Sqm | 25 ₹5,000 | 25 ₹5,000 | 20 ₹4,000 Lowest | 38 ₹7,600 | 55 ₹11,000 | 20 ₹4,000 Lowest | 40 ₹8,000 | 25 ₹5,000 | 49 ₹9,800 | 40 ₹8,000 | 29 ₹5,800 | 40 ₹8,000 | 25 ₹5,000 |
| 10.00 | M&L preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engineer-in-charge. | 100 | Sqm | 10 ₹1,000 | 10 ₹1,000 | 5 ₹500 | 20 ₹2,000 | 13 ₹1,300 | 13 ₹1,300 | 4 ₹400 Lowest | 25 ₹2,500 | 34 ₹3,400 | 40 ₹4,000 | 13 ₹1,300 | 10 ₹1,000 | 15 ₹1,500 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
28 Jul 2025, 6:00 pmClosed
MAJ MANISH E WASNIK
GE (CENTRAL) DELHI CANTT-10
GE/TOKEN-32/2025-26
2025_MES_717699_1
GE/TOKEN-32/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE (CENTRAL) DELHI CANTT-10
AS PER NIT
9 documents required · 9 mandatory
₹500
Yes
GE (CENTRAL) DELHI CANTT-10
₹1 L
Yes
7 Aug 2025
30 Jun 2025
30 Jul 2025
30 Jun 2025
28 Jul 2025
14 Jul 2025
Amount
Demolition of brick work built in cement or cement lime mortar of any description including quoins,arches,pillars,etc complete all as specified and directed by Engineer-in-charge.
M & L for brick work with Cement Mortar1:6 using sub class 'B' bricks,old size , straight or curved on plan exceeding 6 m mean radius complete all as specified and directed by Engineer-in-charge.
all as per Slr item no 2 above but except bricks
Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc complete all as specified and directed by Engineer-in-charge.
M&L for rendering 15mm thick in CM 1:4 on fair faces or other than fair faces of brick work or concrete surfaces firnished even and smooth without using extra cement up to hieght of four storey bldg ,including scaffolding complete all as specified and directed by Engineer-in-charge..
M&L for rendering 10mm thick in CM 1:6 on fair faces or other than fair faces of brick work or concrete surfaces of walls firnished even and smooth without using extra cement in two storey bldg complete all as specified and directed by Engineer-in-charge.
M&L for 5mm thick rendering in cement mortar 1:3 finished even and smoothe surface without using extra cement on ceiling complete all as specified and directed by Engineer-in-charge.
M & L for applying two coats of cement base paint over one coat of primer on newly plastered surfaces(external) of walls including preparation of new surfaces up to hieght of four storey bldg ,including scaffolding complete all as specified and directed by Engineer-in-charge..
M & L for applying two coats of oil bond destember over one coat of birla white wall care putty on newly plastered surfaces(internal) of walls complete all as specified and directed by Engineer-in-charge.
M&L preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engineer-in-charge.
complete removal exising teratment from old surface of wall by scrubbing with hard brushing, brooming down or steel wire brushing scraping down smook soot mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water & applying two coat cement base paint over one coat of primer on old plastered surfaces of walls up to hieght of four storey bldg ,including scaffolding complete all as specified and directed by Engineer-in-charge..
M&L for preparation of old decoreated external wall / internal wall/Ceiling surface of existing treatment by scrapping with TruCare Wall Sander : L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7”/9” to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying 2 mm thick wall care putty over a coat of cement primer up to 8 storey bldg complete all as specified and all as directed by Engr- in-charge. Note :- 1. Stage for prepration of surfaces shall be got approved from GE before applying the finishes. 2. Material shall be procured from manufacturer and work shall be got executed through authorised applicator. Note rate quoted up to G+8 bldg including scaffolding
M& L for preparing the entire surface with applying 2-3 mm thick birla/ JK wall care putty on walls and ceiling surface finished even and smooth complete all as specified and directed.
M& L for preparing the entire surface with applying priming surface with alklai resistance priming paint on walls and ceiling surface finished even and smooth complete all as specified and directed.
M&L for preparation of old decoreated/undecoreated external wall / Ceiling applying two coats of weather proofing exterior acrylic emulsion paint by spray gun/ spray machine up to 8 storey bldg complete all as specified and all as directed by Engr- in-charge. Note :- 1. Stage for prepration of surfaces shall be got approved from GE before applying the finishes. 2. Material shall be procured from manufacturer and work shall be got executed through authorised applicator. Note rate quoted up to G+8 bldg including scaffolding
M & L for preparation of old wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.
M & L for preparation of old steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.
M&L preparation of writing numbers on building by applying black synthetic enamel paint on white base all as specified and directed by eng in charge.
M & L for removal of plant growth by injection with chemical glyphosphate solution (4 % concentration) @ 20 ml or till refuse by cutting or injection in stem of plants or roots at 30 mm. The area shall then be sprayed with solution 25 ml glyphosphate (4% conc) diluted with 1 ltr of water. The size of block shall be of 2 Qtrs on each floor and vary in number of floors. All roots of plants shall be removed completely and making good the disturbed surface and painted with cement base or acrylic paint all as specified and directed by Engr-in-charge.
Demolition of concrete and pavings n.exc 15 cm thickness (below or above ground level).
M&L for precast cement concrete 1:2:4 type B-0 (using 12.5mm stone graded agg) as in louversand jallies 40mm thick designed as fort pattern (measured solid) including all moulding but exceeding frame and set in CM1:4 all as per sample shown and directed by engineer-in -charge.
M&L providing CM 1:2:4 Type B-0 12.5 mm graded agg. In precast coppings incl slightly rounded chemered angles and throating including necessary form work complete.
M&L 75mm thick PCC (1:3:6) C-1 using 20mm graded stone aggregate as in floor, plinth protection etc. finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L chequered tiles 30cmx 30cmx 10mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 15mm thick screed in cement mortar 1:6.
M&L for cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete Complete all as specified and directed by Engineer-in-Charge.
M&L for sand filling under floor or in foundations including watering and consolidation Complete all as specified and directed by Engineer-in-Charge.
M&L for machine pressed precast concrete interlocking paver block 60mm thick M-35 grade any shape and size with grey cement and pigment includind 75 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base Complete all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggrgate as in coping to wall complete all as specifed and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided.
S&Fsteel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing in any type of standard rails, straining bolts incl securing or tying any crossings with provn of MS wire staples or steel pins etc complete fixed in repairs.
M&L for two coats synthetic enamelled paint over one coat of red oxide primer incl preparation of new surface of steel of any description over 10cm width or girth complete all as specifed and as directed by Engr-in-Charge.
Dismentling plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof covering Complete all as specified and directed by Engineer-in-Charge.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws Complete all as specified and directed by Engineer-in-Charge.
S&F Mild steel rolled section as in main and cross beam, hip and jack rafter, purlins, where connected to common rafter and running rails fixed with cleat or other connecting plates etc.(Fe-410-W(Gde E-250)Quality-A)
Demolition of cement concrete of any description and in any position not otherwise specifically provided for.
M&L for PCC( 1:3:6 ) type C-0 using 12.50mm graded stone as in padding on roof correction of slope and roof kerbs all as specified and directed.
M&L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat: SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalent Repair Polymer including taking down existing roof treatment of any type and roughning cleaning of old concrete roof and applying neat cement slurry including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified land as directed. Make: Asian Paints or equivalent in Sikka, Fosroc and STP Ltd. Note: The application shall be executed on any type of surface and on horizontal/Vertical areas.
M&L providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajas in multiple coats @2.0 litre/sqm. Primary [coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Notes for item No 39: (a) The work shall be executed through authorised applicator of manufacturer only. (b) Authrised Applicator shall be approved by GE before starting of work. (c) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (d) MOU with authorized applicator will be submitted by contractor immediately after placing of work order. (d) A guarantee amount of 3% of contract of work done for item No 39 of BOQ will be retained for 5 years of the completion of work.
S&F Framed mild steel work as in doors or gates of angle or other sections with gusset plates, rails, braces, tank stagging etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and gurders) and hanging also fastening and complete all as specified and directed (Fe-410-W(Gde E-250)Quality-A).
Expanded metal n. exc.4kg/sqm, cut to length,bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members
Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm
Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 20mm
Supply and fix galvanized steel tubing, 15 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge.
Supply and fix galvanized steel tubing, 20 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge.
Disconnecting existing tanks of cap 500 ltrs, setting aside (or lower ing if required) for repairs, cleaning, etc. and hoisting if required re- connecting and re-fixing in position and Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc.
S & F in repair 500 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I I(Make : Sintex/Rotex/Polywell).
Demolition and breaking up rain water pipes (CI,AC,PVC etc) set in any cement mortor of any diameter incl bends.
S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110mm bore complete.
S & F 100 mm bore cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified & directed
S & F 75 mm bore cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified & directed
S & F 50 mm bore cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified & directed
S&F in repair PVC (SWR) bends any radius, 110 mm bore complete.
S&F in repair 100 mm bore cast iron bends complete all as specified and as directed.
S&F in repair 75 mm bore cast iron bends complete all as specified and as directed.
Schedule of Credit
a.k constructions (BID ID -3365303)
MS BUILDTECH (BID ID -3374182)
POONAM ENTERPRISES (BID ID -3365722)
SURESH KUMAR SHARMA & CO (BID ID -3368335)
M/S VERMA BUILDER (BID ID -3364332)
V M CONSTRUCTION (BID ID -3366676)
M/s SAAR ENGINEERS (BID ID -3374919)
M/S MSD & Associate (BID ID -3374786)
Lamba Enterprises (BID ID -3365533)
M/S SIMRAN CONSTRUCTION CO (BID ID -3364653)
M/S GR construction compony (BID ID -3374194)
Anandeshwar Enterprises (BID ID -3374832)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .