ADDITION AND ALTERATION OF SEMINAR HALL IN SYSTEM LABORATORY AT VRDE AHMEDNAGAR

Amount

B/R PORTION Dismantling tile work in floors and roofs laid in cement mortar complete all as specified and directed.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling complete all as specified and directed.

Taking down doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete all as specified and directed.

Demolition of cement concrete (unreinforced) as in plinth protection and paving n.exc. 15 cm thickness (below or above ground level) including disposal off rubbish to a distance not exc. 100 Mtrs complete all as specified and directed.

Demolishing brick work in cement mortar manually/ by mechanical means complete all as specified and directed.

Taking down G.I. pipes 15mm to 40mm (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means complete all as specified and directed.

Taking down old plaster or skirting raking out joints and cleaning the surface for plaster complete all as specified and directed.

M&L for 12mm thick cement plaster of mix 1:6 complete all as specified and directed.

M&L for Brick work with common burnt clay machine moulded bricks of class designation 12.5 conforming to IS: 2222 in superstructure (above plinth level up to floor five level) in cement mortar 1:6 complete all as specified and directed.

M & L hardcore of broken stone or boulders of guage exceeding 63 mm but not exceeding 100 mm deposited, spread and levelled in layers not exceeding 15 cm thick watered and rolled/rammed to a true surface complete all as specified and directed

M & L 150 mm thick cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.

M & L 40 mm thick plain cement concrete 1:2:4 type B-1(using 20 mm graded stone aggregate) as in flooring complete all as specified and directed.

Supply only broken glass beads of size 60 to 80 mm (approx) fixed in plinth protection below concrete complete all as specified and directed.

M & L for 75 mm thick PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection complete all as specified and directed.

M&L for 10 mm thick acid and/or alkali resistant tiles asin floors of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete all as specified and directed.

M&L for 10 mm thick acid and/or alkali resistant tiles as in dado of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete all as specified and directed.

M&L for double charged coloured Vitrified tiles 7 to 8 mm thick (square/ rectangular) area of each tile N.exceeding 0.36 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or bedding layer for laying floor tiles in CM (1:4) complete all as specified and directed.

M&L for Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete all as specified and directed.

M&L for stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts stainless steel dash through fasteners, of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc) complete all as specified and directed.

S & F mild steel joist, channel, angle or tee sections, fixed independently, without connecting connecting plates, etc., (cut to ordinary lengths i.e, within 20 mm of length indicated) confirming to Fe-410W (Gde E-250) quality -A complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash through fasteners of required dia and length complete as per direction of Engineer-In- Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S&F oxidised150mm long M.S. double acting spring hinges with necessary screws etc. complete all as specified and directed.

S&F ISI marked oxidised M.S. sliding door bolts 300 x 16mm with nuts and screws etc complete all as specified and directed.

S&F bright finished brass tower bolts (barrel type) with necessary screws etc. complete 250x10 mm complete all as specified and directed.

S&F powder coated aluminium work for doors, windows, ventilators and partitions for fix portion with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, complete all as specified and directed. (Glazing &paneling to be paid for separately) :

S&F powder coated aluminium work for windows, ventilators and partitions for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required (Fittings shall be paid for separately) complete all as specified and directed.

S&F for glazing with glass panes of 4.0mm thick in aluminium door, window, ventilator shutters and partitions etc. with & including EPDM rubber / neoprene gasket complete all as specified and directed. (Cost of aluminium snap beading shall be paid in basic item):

S&F double action hydraulic floor spring with stailness steel cover plate minimum 1.25mm thickness of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete all as specified and directed.

S&F 595 X 595 mm Square hole 16mm Accoustic tiles with & including S.S 304 sections to ceiling with, framing, wall angle complete all as specified and directed.

S&F 16mm Square hole fulton fabbritech Accoustic tiles of 1200 x 2400 mm on & including grid of GI sections, treatement to wall with 50mm glass wool, GI framing complete all as specified and directed.

S&F 12mm thick frameless toughened glass door shutter of approved brand and manufacture , including providing and fixing top & Bottom Pivot complete all as specified and directed. (Door Handle, lock and stopper etc to be paid separately).

S&F Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc complete all as specified and directed.

S&F aluminium powder coated round shape handle of outer dia 100 mm with SS screws etc. complete all as specified and directed.

Taking down wash basins vitreous china in any description including connected assessories complete all as specified and directed.

Taking down Bib taps of any description including connected assessories complete all as specified and directed.

Taking down pillar taps in any description including connected assessories complete all as specified and directed.

Taking down PVC flushing cistern in any description including connected assessories complete all as specified and directed.

Taking down vitreous china urinals in any description including assessories complete all as specified and directed.

M&L for Two coats of Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade over and including water thinnable priming coat with cement primer VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, all as per manufacturer's instructions including preparation of new surfaces complete all as specified and directed.

M&L for 15mm dia nominal bore GI pipes complete with GI fitting, MS clamps, I/C cutting and making good the walls ect complete all as specified and directed.

M&L for 20mm dia nominal bore GI pipes complete with GI fitting, MS clamps, I/C cutting and making good the walls ect complete all as specified and directed.

M&L for white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked white solid plastic seat and lid, conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required

M&L for 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved complete all as specified and directed.

M&L for White Vitreous China Wash basin size 630x450 mm with a pair of C.I. brackets including painting of fittings and brackets, cutting and making good the walls wherever require complete all as specified and directed.

S&F P.V.C. low level flushing cistern 10 litre capacity - White with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete all as specified and directed.

S&F G.I. inlet connection for flush pipe connecting with W.C. pan complete all as specified and directed.

S&F 15mm bore brass bib cock of approved quality complete all as specified and directed.

S&F 15mm bore brass stop cock of approved quality complete all as specified and directed.

S&F 15mm bore CP Brass pillar cock of approved quality and colour complete all as specified and directed.

S&F CP Brass 32mm size Bottle Trap of approved quality & make and complete all as specified and directed.

S&F P.V.C. waste flexiable 32 mm dia pipe for sink or wash basin including P.V.C. waste fittings complete all as specified and directed.

S&F 100 mm sand cast Iron grating for gully trap complete all as specified and directed.

S&F white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with & including 5 litres automatic PVC flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required complete all as specified and directed.

S&F 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and directed.

M&L for Table rubbed polished Granite stone- 16 to 18 mm thick of size (75x50cm) complete all as specified and directed.

M&L for Polished Granite stone slab 16 to 18 mm thick colour of Black, Cherry/ Ruby Red or equivalent in required design and patterns, in linear as well as curvilinear portions of the building over 20 mm (average) thick base of cement mortar 1:4 laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. complete all as specified and directed.

E/M PORTION M&L for point wiring for light point/ fan point/exhaust fan point/call bell/ 5A Power point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable in recessed/ concealed medium class PVC conduit, with Modular switch, modular plate, suitable size G.I. box & earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. including taking down old point wiring etc complete all as specified and directed .

S&F wiring for circuit of 15 A power point along with earth wire for the following sizes of FRLS PVC insulated copper conductor, single core cable in recessed/concealed type medium class PVC conduit including taking down old wiring complete all as specified and directed (i) 2x2.5 sqmm+1x2.5sqmm earth wire Note : Two runs of 2.5 sqmm wire, one run of 2.5sqmm earth lead & pvc conduit shall be measured as one length only.

M&L wiring for circuit/ submain wiring along with earth wire with the 2x4 Sq. mm.+ 1x4 Sq.mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed/ concealed in wall medium class PVC conduit for Acs and DB to Sub DBs complete all as specified and directed including tanking down old wiring. Note : Two runs of 4.0 sqmm wire, one run of 4.0 sqmm earth lead & pvc conduit shall be measured as one length only.

S&F in repairs 10 w 2ft LED type mirror light fitting complete all as specified and directed.

S&F in repairs LED lights fitting 1x 18W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in repairs LED down lighter 2'x2', 36 W complete all as specified and directed.

S&F 3 pin 5/15 A modular socket outlet on switch box /cover including connections etc complete all as specified and directed.

S&F 3 pin 15 A modular switch including connections etc complete all as specified and directed.

S&F two module stepped type electronic fan regulator on plate with internal connections complete all as specified and directed.

S&F 3 pin 5A ceiling rose on existing junction box / wooden block /wall including connections etc complete all as specified and directed.

S&F in repairs sheet metal enclosure (for AC's / equipment ) single pole and neutaral with a two pin and earth plug and socket complete with one single pole MCB 32 Amp 240 volts complete all as specified and directed.

S&F in repairs of 4way(4+12),on surface/recess mounting, horizontal type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly power painted, inclusive of 200A tinned copper bus bar, common neutral link, earth bar, bar for mounting MCBs complete with interconnections, powder painted including earthing etc as required complete all as specified and directed. (But without MCB/RCCB/Isolators)

S&F in repairs MCB DB 240 V SPN 8 way on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc as required complete all as specified and directed. (But without MCB/RCCB/Isolators)

S&F in repairs MCB 63A FP, 50 Hz, 415 V with rupturing capacity 25 KA complete all as specified and directed.

S&F in repairs 5-32 A 240 V 10 KA 'C' curve type MCB suitable for inductive load of following poles in MCB DB complete with connections, testing & commissioning etc complete all as specified and directed. (i) Single pole & neutral 32A

(ii) Single pole 6-32A

Material and labour for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre deep below ground level with top edge of the plate not less than 1.5 metre below normal ground level and connected to earth plate surrounded by 15cm thick packed layers of charcoal dust and common salt and conected to GI wire 4mm dia by means of bolts, nuts check nuts and wahsers of galvaised iron or steel and thimbles and otehr end of the earth wire connected to DB and protected by galvaised iron or steel pipe light grade 15mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh including all necessary excavation and earth work, PCC chamber in cement concrete 1:3:6 type C-2, Rcc cover all as shown in Electrical Plate No 3 and GI Wire upto 7.5m length complete all as specified & directed.

Removing AC of 1.5 TR capacity from existing location and refixing after servicing and gas filling at new/existing position complete all as specified and directed.

Supply, installation, testing & commis-sioning of Water cooler partially stainless steel, electric driven single phase having approx storage and nominal cooling capacity 60/80 ltrs with inbuilt UV RO filter unit including provisioning of water supply connection from nearest water point complete all as specified and directed.

Supply install testing & commissioning hi wall split units indoor/outdoor complete inverter type with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 2.0 TR complete all as specified and directed.

M/S Rudra Construction & Developers (BID ID -3280807)

Siddhant Hukumchand kumath (BID ID -3282906)

M/s. Shahabad Enterprises (BID ID -3279157)