Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.6 LAccepted-AOC UGGAR AULAKH VPO ROKHE AJNALA AMRITSAR | AMRITSAR | PUNJAB | 143001 | ₹18.6 L | L1 | Accepted-AOC Accept |
| 2 | L2₹19.3 LRejected-AOC 66 RISHI VIHAR PHASE II MAJITHA ROAD AMRITSAR | AMRITSAR | AMRITSAR | PUNJAB | ₹19.3 L | L2 | Rejected-AOC Reject |
| 3 | L3₹19.4 LRejected-AOC | ₹19.4 L | L3 | Rejected-AOC Reject |
| 4 | L4₹23.4 LRejected-AOC | ₹23.4 L | L4 | Rejected-AOC Reject |
Tender Value
₹27.0 L
EMD Value
₹54,096
Closing Date
2 Dec 2025, 5:00 pmClosed
EXECUTIVE ENGINEER PROVINCIAL DIVISION AMRITSAR
EXECUTIVE ENGINEER PROVINCIAL DIVISION AMRITSAR
Periodic Repair of Judicial Court Complex Baba Bakala Sahib in District Amritsar
2025_CEPW_153920_1
EE/PD/Asr 73 dated 18.11.2025
Open Tender
Civil Works - Buildings
60 days
Baba Bakala Sahib
Please refer Tender documents.
15 documents required · 15 mandatory
₹5,000
₹54,096
22 Jan 2026
19 Nov 2025
3 Dec 2025
19 Nov 2025
2 Dec 2025
19 Nov 2025
Removing doors and windows together with the dismantling of walls
Window
Scraping White Wash
20mm Thick Cement Plaster
12.5 mm thick cement plaster 1:4
Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complet
Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade
Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.
Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface
Providing surface treatment to external / internal wall with water resistant grade, anti fungal, anti rusting, antifoaming, high percentage acrylic binder washable surface with two coats to be provided with spatula over one coat cement primer including preparation of surface with water resistant grade match colour complete as per specifications and to the entire satisfaction of engineer- in- charge.
Providing and fixing hydraulic door closer ISI mark with necessary screw etc. completeISI designation no I (Size of door up to 700mm)
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L- shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.
Cleaning of terazzo floors with tartaric acid with granite finish
Dry Clean
For Window Curtain
For Door Curtain
Dismantling concrete
Cement concrete 1:3:6
Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M-35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge.
Extra Cost for using darker fast shade for interlocking pavers Tiles of any shape & thickness instead of grey colours.
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.)
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973--Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:-35mm thick
Providing & Fixing decorative high pressure laminated sheet 1mm (1 Star) thick with high density protective surfacelayer and reverse side of adhesivebonding quality conforming to IS : 2046Type S, including cost of adhesive of approved quality.
Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt)For shutter area above 0.50 sqm
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (B) 250mm x 16mm
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.90 MB
BOQ_311863.xls
BOQ • 0.42 MB
sbdJCCBabaBakala.pdf
Tender Documents • 18.77 MB
Download all tender documents and submit your bid