Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.5 LAccepted-AOC | L1 | Accepted-AOC Being L1. | |
| 2 | L2₹49.3 L+₹1.8 L (3.86%)Rejected-Finance | L2 | Rejected-Finance Higher bid value. | |
| 3 | L3₹49.6 L+₹2.1 L (4.47%)Rejected-Finance KHAWASNIWAS NEAR POLICE QTRDEORALI GANGTOK SIKKIM | L3 | Rejected-Finance Higher bid value. | |
| 4 | L4₹49.9 L+₹2.5 L (5.19%)Rejected-Finance | L4 | Rejected-Finance Higher bid value. | |
| 5 | L5₹50.0 L+₹2.5 L (5.29%)Rejected-Finance | L5 | Rejected-Finance Higher bid value. |
Tender Value
₹47.4 L
EMD Value
₹97,500
Closing Date
9 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gangtok
GE Gangtok New Mil Stn Gangtok, Sikkim PIN-737102
PROVN OF 06 X TOILET AND 06 X BATHROOM WATER SUPPLY NEAR BLDG NO T191 DISH WASHING ROOM NEAR BLDG NO T149 COVERED PATHWAY TO BLDG NO 19 ADDN ALTN TO BLDG NO B31 AND CERTAIN MINOR WORK AT NEW MIL STN UNDER GE GANGTOK
2022_MES_557988_3
8091AE8
Open Tender
Civil Works
Works
182 days
GE Gangtok New Mil Stn Gangtok
As per tender documents
8 documents required · 8 mandatory
₹500
GE Gangtok
₹97,500
Yes
2 Mar 2023
20 Jan 2023
11 Feb 2023
21 Jan 2023
9 Feb 2023
27 Jan 2023
Amount
Surface excavation n .exc.30cm deep and averaging 15 cm deep and getting out in soft/loose soil etc all as specified and as directed.
Excavation in trenches n.exc 1.5 m in depth and 1.5 m in width for foundation etc and getting out in soft / loose soil all as directed.
Removing excavated mitris (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m the starting point all as directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil all as directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregare) as in foundation filling & mass concrete complete all as specified and as directed.
M & L walling of RR stone masonry uncoursed, well bonded, bedded and solidly hearted built in CM 1: 6 incl brought upto course at interval of every 60cm complete all as specified and as directed.
M&L for cement concrete type B-0 1:2:4 using 12.50mm stone aggt as in DPC with WPC complete all as specified and as directed. Note- Wpc will measured and paid sepereately at supply only rates.
Applying eveanly a coat of blown bitumen @ of 1.5 Kg per Sqm and binding with clean dry sand @ 0.05 Cum Per Sqm
M/L for precast hollow block massonary of 1:3:6 type C1 using 20 mm graded stone aggregate exe 10 CM width and setting in CM morter 1:6
M&L for pre cast cement concrete block masonry with solid blocks, exc 10 Cm in width and setting in cement mortar type C1 1:3:6 (20mm graded aggregate) complete.
M&L for rendering 15mm thick on fair face of brick or concrete surfaces in cement mortar (1:4) finished even and fair
M&L for 15mm thick screed bed in cement mortar (1:6) for laying floor finishes etc
M&L Non skid ceramic coloured tiles 7 to 8 mm thick(square/rectangular) area of each tile exceeding 0.06sqm but n.exc 0.11 sqm , in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match over 15mm cement Screed in cement mortar 1:6 complete all as specified and as directed.
M&L glazed ceramic coloured tiles (200 x 200mm) x 7mm thik on vertical surface such as skirting, dado's & risers of steps over 15mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
M&L for 20 mm thick rendering in two layers 10 mm each in cement mortar (1:4) with using water proofing compound in external layer as per manufacturer instructions on fair faces of brick / concrete surfaces Note water proofing compound measured sepreatly
M&L for rendering 20mm thick on fair face of brick or concrete surfaces in cement mortar (1:6) finished even and fair complete all as specified and as directed.
M&L for preparation of new plaster surfaces and aplying three coats of white wash on walls complete all as specified and as directed.
Supply only liquid integral water proofing compound
M&L for Mild steel TMT bars 6 to 8 mm dia cut to length and bent to shape required including cranking, hooking ends and binding with and MS wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed
All as per serial item No 18 here-in-before but us 5mm dia and over upto and including 10mm dia in stirrups, specer and binders
M&L for reinforced cement concrete type B-1 (1:2:4) using 20 mm graded stone aggregate as in intel etc complete all as specified and as directed
Use and waste of form work to soffits and sides of floor or roof beams, beams, haunching, lintel etc including supports over hang etc
M&L Sand filling under floor in layers n.exc 25 cm thick including watering, ramming and consolidation etc complete all as specified and as directed.
M&L for 75mm PCC 1:4:8 type D-2 using 40mm graded stone aggregare as in sub base of floor finished even and fair complete all as specified and as directed.
M&L for 25 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate finished and even as in copping layer of floor complete all as specified and as directed.
S&F of solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tub fixing in opening as per specification and drawing complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30mm th (style) consisting of frame made out of MS tubes for top & bootom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rails on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the stiles & rails with suitable PVC sheet beading & joined together with solvent cement suppling & fixing in the frame at site as specification & drawing
M&L MS Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410W (Gde E-250 quantity 'A' complete all as specified and as directed.
S&F of CGI sheet Class VIII glavanized 0.63 mm thick with two corrugation side laps as in roof fixed with 'J' or 'L' hook complete all as specified and as directed
S&F of Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) 0.63 mm thick (class VIII) complete all as specified and as directed.
M&L for providing precast cement concrete type B-O (1:2:4) using 12.5 mm graded stone aggregate as in louvere and jallies 50 mm thick (measured solid) including all mouldings but excluding frame set in cement mortar 1:4 complete all as specified and as directed.
M&L for preparation of new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F for 75mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and as directed.
M&L for 150 mm long aluminimum anodised barrel tower bolt complete all as specified and as directed.
M&L for 150 mm long aluminimum handles cast type, anodised complete all as specified and as directed.
M&L for 15 mm bore steel tubing medium grade galvanised with all fittings complete to walls & laid in floors complete all as specified and as directed.
M&L for 20 mm bore steel tubing medium grade galvanised with all fittinged complete to walls & laid in floors complete all as specified and as directed.
S&F for 15 mm bore bib taps, standered of PTMT any colour high pressure screwed for iron pipe and fixed minimum weight 90 Grms complete all as specified and as directed.
S&F for 15 mm bore pillar taps, standered of PTMT any colour high pressure screwed for iron pipe and fixed minimum weight 110 Grms complete all as specified and as directed.
S&F for 15 mm bore angle stop value, standered of PTMT any colour high pressure screwed for iron pipe and fixed minimum weight 90 Grms complete all as specified and as directed.
S&F vitreous china squatting pan "Orrisa patern" size 580 mm x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed. ( Make :- Paryware/Hindware/Cera)
S&F for PVC low level flushing cistern of 10 ltrs capacity action type white body with intel ball valve float handle bracket flush pipe etc complete and connecting to WC with PVC flushing pipe complete all as specified and as directed.
M&L for hard core of gauge n.exc .63 mm deposited spead, levelled, watered well rammed to a uniform surface n.exc 15 cm thick using broken stone or boulder complete all as specified and as directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm stone agg) as in plinth protection, path etc finishing surfaces even and smooth without using extra cement including construction joints at every 3 m interval and each coner and provition of mastic filling
M&L for PCC 1:3:6 type C-2 (using 40mm stone agg) as in surface channel / drains complete all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred and stopped ends etc complete all as specified and as directed.
Add or deduct for each 25 mm girth or part there or over or under 30 cm here-in-before
S&F of PVC 'P' or 'S' trap 110mm bore complete all as specified and as directed.
S&F of PVC 'P' or Nahani trap 75 mm mm bore complete all as specified and as directed.
S&F vitrios china wash basin white flat back size 630x450 with brackets with coupling and waste pipe complete all as specified and as directed.
S&F for Grating doom 100mm dia of PTMT complete all as specified and as directed.
M&L Concrete bed to drain pipe of 150 m dia including packing under and haunching against the side or pipe after they are laid and tested, in PCC (1:3:6) type C-2 complete all as specified and as directed.
M&L salt glazed stoneware drain pipes 150mm bore laid in trenches and jointed as specified
M&L Cutting into 150dia existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B:1 smooth finished, and reforming benching as requiered complete all as specified and as directed.
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed with wall etc complete all as specified and as directed.
S&F 75mm PVC (SWR) vent cowl etc complete all as specified and as directed.
Surface dressing n.exc 15 cm deep getting out in soft/loose soil complete all as directed.
Material and Labour for precast cement concrete solid block masonry Type C1 (1:3:6) using 20 mm graded aggregate exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed.
M&L rendering 15mm thick in CM 1:6 on other than fair faces of brick or concrete surfaces finished even and smooth with out using extra cement all as specified and directed.
M&L Preparation of newly plastered surfaces of walls and applying two coats of Weather proof paint over a coat of alkali resistance primer on new surfaces of walls all as specified and directed.
M&L RCC (Nominal mix) type B1, 1:2:4 using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed
Use and waste of formwork to sides of concrete foundations,plinth beams for rough finished surface of concrete, complete all as specified and as directed
M&L RCC (Nominal mix) type B1, 1:2:4 using 20mm graded stone aggregate as in slabs supported on wall beam ,, under-reamed piles and mass concrete complete all as specified and as directed
M & L for TMT bars 10mm dia and over cut to length bent to shape required incl, cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to IS:1786 complete all as specified and as directed
Materials and labour for 100 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub-base of floor over and including 50 micron polythene film laid complete all as specified and as directed.
M&L for providing Machine cut kota stone slab,flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick screed bed complete all as specified and directed.
Materials and labour for glazed ceramic tiles coloured of size 300 x 200 mm x 7 mm thick fixed on vertical surfaces such as dado etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of screed bed 10mm thick in cement mortar 1:4 complete all as specified and directed.
Material and labour for 12mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15cm and n exc 22.5cm long complete all as specified and directed.
Supply & fix Mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats etc conforming to Fe 410-W (Gde-E- 250) including painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete
Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets (Trapezoidal profile) of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed.
Material & labour for Lacquer coated coloured chequered cement concrete tiles 300 x 300mm x 25mm thick set, jointed and pointed in neat slurry in floors with grey cement and pigments over and incl 15mm thick screed bed or bedding layer of motar for laying floor finishes in cement plaster 1:4 all as specified and as directed.
M&L for PCC 1:3:6 type C-2 (using 40mm stone agg) as in surface channel / drains complete all as specified and directed.
Supply & fix, 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with necessary clamps,bolts etc.complete all as specified and as directed
Supply & fix, 110 mm bore PVC (SWR) bends any radius complete all as specified and directed by the Engr-in-Charge.
Supply & fix Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S & F 35mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, paneled shutter (two panel) with lock rail and panel of 9mm thicl BWP commercial ply or 12mm veneered particle board with commercial face veneers on both faces or 10mm bison panel complete all as specified and as directed.
M & L for applying two coats of synthetic enamel paint on new or previously untreated wood surfaces exc 10cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and as directed.
Supply & Fix 100mm long butt hinges medium weight cold rolled complete all as specified and as directed.
Supply and fix 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
Supply and fix aluminium alloy anodised sliding door bolts 250 mm long with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed.
S&F Steel ventilator with top hung shutter including hinges , steel pey stay complete all as specified and directed.
S&F 3 mm thick ,figured glass, pin head type and glazing with oil in square n.exc 0.50 sqm in each panel complete all as specified and directed
Dismantling plain or corrugated sheeting, any gauge, thickness all as specified and directed.
Dismantling of timber in scantling 40 sqcm and over in section in any position in unframed work all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm all as specified and as directed.
Demolition cement concrete (Un reinforcement) concrete in ground floor and paving n exc 15 cm thickness (below and above of ground level) all as directed
Taking down cement plaster of any description on brick or stone walls incl raking joint hacking for key ,scrubbing down with water etc all as directed.
Demolition of brickwork or stone/boulder masonary built in cement mortar including all quoins, arches, pillars, precast PCC bond stones including separating serviceable stones/boulders & setting aside for reuse in the work and removal of unserviceable materials from site complete all as specified and directed.
S&F MS framed works such as a grill grating etc with end of bars shoulders and or revited or forged into spike framed guard bar barrel iron door conforming to Fe250 Gde E-165 complete all as specified and as directed.
S&F 3.2 mm thick mild steel plain back sheet in steel gate and similar work including round headed screws ,clouts nails or revited fixed to steel framing with plain 40mm lap joint with revited or welded seamsincluding bending or turning etc as required complete as specified as as directed.
S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidesbcomplete all as specified and directed.
S&F Extruded aluminium alloy handles 150mm long, fabricated type, anodised. complete all as specified and directed.
M&L preparation of new or previously untreated wooden surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
M/L for precast cement concrete hollow block massonary of 1:3:6 type C1 using 20 mm graded stone aggregate exe 10 CM width and setting in CM morter 1:6 complete all as specified and directed.
M&L for preparation of new plaster surfaces and applying priming plastered and other surfaces with alkali resistance pimimg paint and aplying two coats of acrylic washable distemper on walls as specified and directed.
M&L for preparation of new plaster surfaces and applying priming plastered and other surfaces one coat of wall care putty with alkali resistance pimimg paint and aplying two coats of acrylic washable distemper on walls as specified and directed.
M&L Preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of suitable primer on new surfaces of walls all as specified and directed.
M/L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate ) as in sub base complete all as specified and directed by the Engr-In -charge.
M&L Non skid ceramic coloured tiles 7 to 8 mm thick(square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match. in floor over & incl 15 mm thick screed bed with CM 1:6 complete in floor to receive the tiles complete all as specified and as directed.
M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed.
S&F Soap dish, vitreous China white, approximate size 160x 160x90mm. any type, fixed to plugs with chromium plated brass screw complete all as specified and directed.
S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by the Engr-in-Charge.
M&L For cutting hole upto 30cm depth and superficial area exc 150sq cm but not exc 400 sqcm in stone walls built in cement mortar and walls of cement concrete and making good in cement mortar 1:3 or cement concrerte 1:2:4 type B1 as requiered etc all as specified and as directed.
M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, and brushing neat cement slurry with 3.0kg of cement per sq. metre etc complete all as specified and as directed.
S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.45mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws all as specified and directed by Engr-in-Charge
S&F Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.45 mm thick of any colour having tensile strength of 550 mpa as in roof covering,ridges, valley, vally gutter, as in eaves and in cladding to wall fixed with self tapping screws as specified and all as directed by Engr-in-Charge
S&F for MS Tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts confomiing to Fe- 290 Gde-E-165 etc all as specified and as directed.
Use and waste formwork to fair finished flat surfaces for faces of walls , retaining walls etc all as specified and asdirected
M&L for preparation of new steel surface of any description over 10cm in width or girth,not otherwise described applying two coats of Black Japan paint over a coat of red oxide complete all as specified and as directed.
S&F for 110mm dia PVC (SWR) pipes single socketed in any lenth with rubber ring joints fixid with walls with all fittings for fixture etc all as specified abd as directed.
M&L for excavation over area in soft loose soil n.exc 1.50m deep and getting out etc copmlete all as specified and directed.
M&L RCC M30 using 20mm graded stone aggr as in foundation ,including rafts,footing,foundation beam,plinth beam, using liqui WPC complete all as specified and as directed. Note:liquid WPC shall be measured and paid saperately in relevent items.
M&L RCC M30 using 20mm graded stone aggr as in wall ,retaining wall, using liquid WPC complete all as specified and as directed. Note:liquid WPC shall be measured and paid saperately in relevent items
M&L RCC M30 using 20mm graded stone aggr as in slabs supported on walls beams and coulmns in floores , using liquid WPC complete all as specified and as directed. Note : Liquid WPC shall measured and paid saperately in relevent items
M&L RCC M30 using 20mm graded stone aggr as in beams , cantilevers etc. Using liquid WPC complete all as specified and as directed. Note : Liquid WPC shall be measured and paid saperately in relevent items
Use and waste of formwork to edges of concrete flats floors and etc. Exc. 5cm but n.exc.10cm complete all as specified and as directed.
Use and waste of formwork to fair finishes of soffits of suspended slabs such as roof slabs landing and similar slabs etc complete all as specified and as directed.
M&L for precast cement concrete in cover slabs (for manholes) set in CM 1:4 type B1 1:2:4 (20mm graded stone aggt ) etc all as specified and as directed.
M&L Mild Steel round bar of grade Fe 410 (Gde E250), 16mm dia as in rungs complete all as specified and as directed.
S&F cast iron vent pipe 75mm dia fix in concrete etc all as specified ans as directed
S&F for 50mm dia medium grade galvanished tubes (pipes) with all fittings etc complete all as spcified and as directed.
S&F for 40mm dia medium grade galvanished tubes (pipes) with all fittings etc complete all as spcified and as directed.
S&F for 50mm dia stop valve cast copper alloy,screwed down, high pressure with crutch or butterfly handle screwed boths ends for iron pipe or for union and fixed etc.
S&F for 40mm dia stop valve cast copper alloy,screwed down, high pressure with crutch or butterfly handle screwed boths ends for iron pipe or for union and fixed etc.
M&L for PCC 1:3:6 (using 20mm graded stone aggt) as in coping ,kerbs, and haunching etc all as specified and as directed.
M&L PCC 1:3:6 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed
M&L for 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in sub base floor etc finished the concrete surfaces even and fair without using extra cement etc complete all as specified and directed
M&L for plain cement concrete 1:3:6 type C-2 as in retaining wall etc complete all as specified and as directed.
M&L for PCC 1:2:4 type B1 (20 graded aggregate) as in coping, bed plates including weathering, slightly rounded or chamfered angles and throating all as specified and as directed.
S&F PVC (SWR) 75mm dia pipes single socketed in any length as in weep holes complete all as specified and as directed.
M&L Hand packing (any thickness) Broken Stone or boulder at back of walls over arches etc & raising (or lowering) to the required level.
S&F of geosynthetic material filling in PVC pipe 75mm dia as in weep holes cover complete all as specified and as directed.
Supply only stone boulders exceeding 15 cm and upto 30cm dia all as specified and as directed.
M&L for 25mm thick cement concrete type B-1 1:2:4 (20mm graded aggregate) as in flooring and finished the concrete surfaces even and rough to receive the top finish complete
Supply only Water proofing compound.
M&L for MS bars 5mm dia and over upto and including 10mm in sitrrups cut to length, bent to shape required incl cranking bending spirally for hooping for columns, hooking ends and bnding with and incl mild steel wire (annealed) not less than 0.9mm dia quality conforming to TMT bars complete all as specified and directed.
S&F vitreous China urinals,half stall type ( flat back or corner wall type) 325x310x420mm including CP waste coupling, CP urinal spreader and waste pipe complete fix to wall surface etc complete all as specified and as directed. Make : CERA (CARYS) vide cat part No S4020104
Supply and fix PVC connections 15mm size with PTMT nuts of length 450mm complete all as directed by the Engr-in-Charge. Make Prayag Cat No 323 or equivalent make as specified.
Supply and fix galvanished steel water tubing 15mm bore, medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as directed.
Supply & fix in 15 mm bore dia angular stop cocks, cast copper, fancy type, chromium plated, with wall flange screwed down, screwed from iron pipe or union and complete all as directed.
S&F Vitreous China, Wash Hand Basin, white, flat back of size 550 mm x 400 mm x 790mm, including cast iron brackets of suitable size including providing 32mm dia CP waste pipe 32mm bore coupling of PTMT (half or full threaded minimum weight 45 gms) and making all necessary connections as dirceted. Make : Cera cat part No S2090101 or equivelant.
S&F Pillar taps cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.
S&F 50mm bore LDPE pipe for pressure 6Kg/Sqcm complete all as specified and as directed.
S&F 150mm bore, PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or under floors fixed on walls with necessary clips complete all as specified and as directed.
M&L for applying three coats of white wash on new plastered wall surface including preparation of new and previously untreated surfaces of wall complete all as specified and directed.
M&L for applying two coat of exterior acrylic emulsion weather proof paint over a coat of primer on new/old plastered surface including preparation of new/old plastered surface etc complete all as specified and directed
Supply and fix bib tap, long body cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for 15mm bore GI Pipe or for brass ferrule including taking down old unserviceable one complete all as specified and as directed.
M & L for point wiring with 1.5 Sqmm PVC isulated unsheathed single core stranded copper conductor (FRLS) cable of working voltage 1100 Volts grade conforming to IS-694 pt-I & II of 2000 drawn in and including 25 mm size PVC casing caping (Double lock) with all casing capping fittings & accessories with 1.60 mm thick pressed steel or mild steel sheet sunk box covered with 3mm thick backelite sheet fixed with brass screws & cup washers including 1.5 sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable as earth continuity conductor connected to main switch/ DB's or common earth dolly complete for light point/ fan point/ exhaust fan point / call bell point controlled by one switch 5/6 AMP one way complete all as specifed and directed.
All as per item Sl No 151 above but with 2.5 Sqmm copper conductor with 2.5 Sqmm earth stranded wire for 16 Amps power point in independent board.
Supply & fixing LED tube 4 feet light fitting 1 x 18 W, 220 V AC decorative box type with dirver, holder including LED tube light connecting up with three core flexiable copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexiable copper flexiable copper conductor cable of suitable size complete all as directed.
Supply & fix lamp holder angular/straight insulated body, with back plate suitable for battern futtings, white/ivory finish complete all as directed.
S&F in repair switch piano, flush type 6 amps 230 volts, single pole one way (ISI marked) complete all as directed.
S&F switch socket combination, 2 in 1, 6 pin, 5/6 Amps and 15/16 Amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flush type white/ivory finish with two fixing hole including suitable gang box complete all as directed.
S&F ceiling rose, PVC/polycarbonate insulated body, 3 terminal and 240 volts, ISI marked complete all as specified.
S&F in repairs sheet metal enclosure for 4 way Distribution Boards (DB’s), single pole and neutral double door with IP-43 protection suitable for fixing MCB's/lsolators after and including taking down old DB with MCB complete all as specified and as directed. (Make : L&T cat No DBTPE004DD or equivalent of approved make)
M&F for sub main wiring with 2 run of 10Sqmm PVC insulated sheathed single core flame retardant cable (FR) of working voltage 1100 volts grade with stranded copper conductor including one run of 6 Sqmm (nominal cross sectional area) PVC insulated sheathed flame retardant cable (FR) with stranded copper conductor as continous earth wire connected to main switches DBs or in commom earth dolly drawn in and including PVC rigid non-metalic casing capping complete all as specified and as directed Note:- Two run of sub main wiring cable along with one run of earth wire shall be measured as on length complete all as specified and directed by Engr-in-Charge
S&F in repairs MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge. (Make : L&T cat No BB20320C or equivalent of approved make)
S&F LED street light fittings 60W 230V AC out doortype with high pressure die casting complete with all driver, lamp bracket including thermal management with IP 65 rating
S&F in repairs MCB, single pole & neutral, 32 to 63 amps, 240 volts, 10 KA complete all as specified and as directed (Make : L&T cat No BB20630C or equivalent of approved make)
Supply, installation, testing and commissioning of electirc water heater, storage vertical type, BEE 5 star rated, 25 ltr capacity 230 volts AC, 50 Hz comprising of high wattage heating element for instant heating, extra thick SS inner tank or superior 304 grade, rust & shock proof ABS outer body, non-ferrous pressure plate with & including provision of pressure relief valve and grouting bolts suitably flushed to wall or any orther surface including electric connection with 3 core PVC insulated, sheathed, stranded copper conductor cable/flexible chord complete all as specified.Make : - Havells Cat No - Monza DX : GHWBMGSWH0550 or equivalent approved.
All as per item Srl No 164 but for capcity 50 ltrs.
S&F Rotational moulded polyethene water storage tanks 1000 ltrs, ISI Mark, multilayer constraction (Cylindrical vertical with close top) hoisted and fixed in position incl supply and fixing of 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of having weight not less than 455 gms including connection complete all as specified and directed.
M&L for 25mm dia steel tubing medium grade galavanised with all fitting fixed complete all as specified and as directed by Engr in charge.
S&F Gun-metal, globe or gate valves 25mm bore with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
Supply and fix stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron piep or for unions and fixed of size 15mm complete all as specified and directed.
Supply and fix PVC connection pipe 15mm size with PTMT nut of length 750mm complete all as specified and directed by Engr in Charge.
Screwing 25mm bore in existing steel tubing for alteration or additons (or lengthing screw on pipe to form connection) complete all as specified.
S&F LED bulb 09 watts minimum lumens 900 B-22 Cap Make: Havells/Phillps/Crompton
Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz RPM 1200, copper winding of sweep 250mm
S&F in repairs sheet metal enclosure for 8 way Distribution Boards (DB’s), single pole and neutral double door with IP-43 protection suitable for fixing MCB's/lsolators after and including taking down old DB with MCB complete all as specified and as directed.
Supply, laying, jointing and testing in trenches or passing through pipe, 1100 Volts grade XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cable conforming to IS:"7098 (Pt-I)-1988 heavy duty with aluminium conductor of cross sectional area 10 Sqmm 2 core with necessary fixing arrangements such as lungs, glands and terminal etc complete all as specifed and as directed.
All as per item Srl No 175 but for 16 Sqmm 2 Core
All as per item Srl No 175 but for 6 Sqmm 2 Core
M & L for earthing in repairs complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 1991 print and as directed .
Supply and fix Brass Tee of outer dia 16mm dia, complete all as specified and directed.
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilling or laying in floors etc of outer 16mm dia complete all as specified and directed
Supply of fixing of GI tubing 25mm dia medium grade ISI marked laid in trenches/ under floor on ground/floor including all fittings such as elbow, union, reducer, tees, bends etc and short length complete all as specified and directed by Engr-in-charge.
All as per serial No 181 but for 15 mm bore.
S&F Brass CP mixer for hot and cold water screwed down to 15mm iron pipe with all fittings.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, inlcuding fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and as directed.
Taking down carefully by unscrewing from boards/outlet boxes, DB, fittings and fixture such as switches, sockets, ceiling roses lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators etc.
Taking down carefully by unscrewing main switch or DB's etc
All as per item Sl No 151 above but with 1.5 Sqmm copper conductor with 1.5 Sqmm earth stranded wire for 5 Amps power point on independent board.
Supply and fixing exhaust fan made of sturdy Engineering steel body complete with louvers shutter, voltage 230V, 50 Hz copper winding of sweep 150mm complete all as directed by Engineer-in-charge Havells Cat- Ventil Air-DS
S&F switch socket combination, 2 in 3 6 pin, 5/6 Amps multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as directed.
S&F in repairs sheet metal enclosure for 2 way Distribution Boards (DB’s), single pole and neutral double door with IP-43 protection suitable for fixing MCB's/lsolators after and including taking down old DB with MCB complete all as specified and as directed. (Make : L&T cat No DBTPE002DD or equivalent of approved make)
Supply and fixing LED light fitting 1x9W/ 1x10W bulk head luminaries including LED light driver holder connecting up with three core flexible copper flexible copper conductor cable of suitable size complete all as directed.
KAMLESH ENTERPRISE
M/S S. S CHETTRI AND SONS
KARMA SHERPA
DHARMINDER SINGH
RAAJ BANGAR
M/S ANIL KUMAR THAKUR
BIJAY MITTAL
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .