SPECIAL REPAIR TO GOVT MD ACCN BLOCK NO P-171 AT TARAPORE ENCLAVE AND PROVN OF THREE PHASE SUPPLY FOR 03 X STIMULATORS AND 02 X CWTS AT DM REGT UNDER GE (N) AHMEDNAGAR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Demolition of cement concrete (unreinforced) in ground floors and paving’s of any thickness below or above ground level all as directed.

Material and labour for special treatment of sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid conplast x 421 IC of FOSROC or equivalent and applying one coat Each of Nittoproof 120 of FOSROC or equivalent on plastered surface rendering again 10mm thick in CM 1:4 mixed with complast - 421 filling the sunken floor with PCC 1:5:10 using brick bat area of floor upto 3.00 Sqm including 40 mm dia 0.60 m pipe etc complete all as specified and directed by Engineer-in-Charge. Note : Work has to be carried out strictly by the authenticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

S&F light shade Virified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6.

S&F light shade vitrified ceramic tiles 8 to 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in vertical surfaces such as skirtings, dado set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.

S&F Non-skid Coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) size of each tiles 400x400 mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6

M&L for Glazed ceramic coloured tiles in vertical surface 450x350x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in backing of skirting and dado including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.

Excavation over areas not exceeding 1.5 M deep and getting out in Hard/ Dense Soil

Moorum filling in floors/pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed/ rolled including watering to require level and gradient.

M&L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface.

S&F Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking etc and binding with MS wire 0.9mm dia(annealed), and including rebaring in existing Plinth Beam complete all as specified and as directed.

M&L RCC (1:2:4) nominal mix type B1 using 20mm graded stone aggregate slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies , deck slabs and in shelves and the like complete all as specified and directed.

Taking down cement plaster on brick or stone wall/ceiling/chajjas etc including raking out joints hacking for key ,scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:4 over brick or concrete surfaces finished even and smooth without using extra cement and water proofing compound @ 3% by weight of cement (WPC shall be measured and paid separately).

M&L for rendering 5 mm thick in 1:3 over brick or concrete surfaces or on chajjas finished even and smooth without using extra cement .

Supply only approved integral water proofing compound

M&L for preparing newly plastered surfaces on wall and applying two coats of acrylic distemper over one coat of primer over 3 mm thick wall care putty complete all as specified and as directed.

M&L for preparing newly plastered surfaces and applying three coat of white wash on ceiling complete all as specified and as directed.

M&L for application of finishing new surface walls with premium acrylic smooth exterior paint with silicone additives of required shade: new work (Two or more cpoats [email protected] ltr/10Sqm over and including priming coat of exterior primer applied @2.20kg/10 sqm all as specified and as directed.

M&L for application of finishing old surface walls with premium acrylic smooth exterior paint with silicone additives of required shade: new work (Two or more coats [email protected] ltr/10Sqm over and including priming coat of exterior primer applied @2.20kg/10 sqm all as specified and as directed.

M&L for preparing of old decorated plastered surfaces of ceiling and applying two coat of white wash complete all as specified and as directed.

Material and labour for applying two coats of oil bound distemper over a coat of primer, over a two coat of wall care putty on old decorated wall surfaces after complete removal of existing treatment all as specified and directed

M&L for preparing old surface wall surfaces and applying two coat of white wash complete all as specified and directed

S&F Grating doom 100mm dia (Minimum weight 25gms)

S&F 32mm dia, polyethylene pipe (LDPE) of low density of pressure rating 6kgf/cm2 fixed completely to wall/floor for wash hand basin including taking down old one all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts if length 450 mm including taking down old one all as specified and directed.

Taking down of chowkat with shutters without taking off shutters from the frame, exceeding 1.5sqm but not exceeding 2 sqm each all as specified and as directed.

Taking down of chowkat with shutters without taking off shutters from the frame not exceeding 1.5sqm each all as specified and as directed.

Taking down of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.

Re fixining same opening of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.

M&L for 18/19mm thick Block boards, grade 2 quality interior grade commercial type fixed with screws to timber frame work

S&F IInd class hard wood plain solid, straight, chowkats and frame, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified and as directed.

S&F Pressed steel frames for doors with one or more rebates of size 125 x 60mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S&F 30mm thick flush door shutter solid core construction with block board core and plywood face panels commercial type on both sides .

S &F 25mm thick Flush shutters for loft, solid core onstruction, with block board core and plywood face panels, commercial type on both sides incl taking down old one

S&F second class hardwood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass gauge etc with sash bar divided into squares edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass or gauze etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.20 (a) fitted to chowkats .

Dismantling of particle board, any thickness including cover fillets

M&L for 25mm thick prelaminated particle board interior grade pre-laminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work all as specified.

M&L for 1.5 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved.

M&L for 6mm thick Cover fillets of standard hard board 40mm wide and fixing with screws.

S&F 300 mm long, mild steel ordinary rat rail springs including roller and roller plate complete and facing down old one all as specified and as directed.

S&F butt hinge, medium weight, cold rolled mild steel 100mm long all as specified and as directed.

S&F butt hinges, medium weight ,cold rolled mild steel 75mm long all as specified and as directed.

S&F aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed.

S&F floor door stopper of aluminium alloy body double and tongue anodised with rubber shoe and fixed of size 150 mm all as specified and as directed.

S&F aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed all as specified and as directed.

--ditto-- All as per Sr item No 47 above but 100mm long

S&F extruded aluminium alloy handle fabricated type anodised 150 mm long

--ditto-- All as per Sr item No 48 above but 100 mm long

S&F hasp and staple, safety type aluminium anodised with hinge pin including bolt to hinge plate and fixed with screw 125 mm long all as specified and as directed.

S&FSupply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.

M&L for Aluminium framed windows / Door any pattern, fixed/side hung/sliding (three track) using powder coated (minimum 50 micron) alluminium sections, of approved make with or without sash bars suitable for 4mm thick glazing including necessary jointed cleats, handles, glazing all as specified Note-: (glazing shall be measured and paid separatly)

S&F for Anodised aluminium window and ventilator shutters using powder coating (Thickness or powder coating not less than 50 micron), fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F 4mm thick figured glass pin head type and glazing with in squares exc 0.5 sqm in each pane all as specified.

S&F 4mm thick sheet plain glass ordinary quality and glazing with in squares exc 0.5 sqm in each pane all as specified.

S&F 4mm thick sheet tinted glass ordinary quality and glazing with in squares exc 0.5 sqm in each pane all as specified.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanized wire staples all as specified and as directed.

S & F in repairs Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc

M&L for preparing of new painted surface of steel and iron work of any description not specifically mented otherwise mentioned otherwise over10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide all as specified.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint including scaffolding at any height complete all as specified and directed by Enggineer-in-charge.

M&L for preparing new surfaces of wood of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

M&L preparing of old painted surface of wood work of any description not specifically mentioned otherwise over10cm width or girth and applying two coat of synthetic enamel paint

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc

M&L for 20mm thick granite (of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like in cement (1:4) including pointing in wihte cement (1:2) using marble dust with admixture of pigment ot match with shade of granite.

Demolition or brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles in cement mortor in 1:4

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4

M&L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls,built in CM 1:4 all as specified.

M&L for machine cut kota stone flooring 18-20 mm thick over Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc as directed by Engg-In-Charge.

M&L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.

M&L for machine cut cudappah stone 20-25 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L Rounding to edges of stone slabs one edge ,such as in steps cooking platform and other similar situations

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size mini 815mm x 455mm bowl size 355mm x 355mm x 185mm including 40 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

Supply only 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipes or connections including necessary packing union and cap.

M&L for PVC (SWR) multi floor trap of 75mm outlet with grating including jointing with solvent cement except trap

S&F PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement.

S&F 75 mm bore PVC (SWR) Vent Cowl

S&F in 75mm bore pipe traps "P" or "S" all as specified.

S&F in 100mm bore pipe traps "P" or "S" all as specified.

M&L PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement all as specified and directed.

S&F 75 mm PVC (SWR) bend any radius all as specified

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified.

S&F 75 mm PVC (SWR) pipes single socket in any length with rubber ring joints in trenches or in floors all as specified.

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.

S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls.

S&F 110 mm bore PVC (SWR) branch piece double (Double `Y') equal or unequal with access door.

S&F in repairs 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, and screwed for iron pipe or for brass ferrule.

S&F paper holder of fixed to walls with chromium plated (CP) brass screws Code : AHS-CHR-1553 paper holder Made - Jaquar

S&Fin repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand.

S&F in repair Chromium plated shower roses 125 mm dia size with or without swevel joints and size including fixing to steel pipe or union.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F CP soap dish holder including fixed to plugs with chromium plated brass screws. Make of Jaquar Code :AQN-7731

S&F in repairs Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F Brass chromium Flated mode 3 in 1 wall mixture model regular half turn of make Johnson mode regular or equivalent in make Jaquar and as all specified and as directed. Code CON-281KN

S&F PVC mirror cabinet of size3 50x450mm of make PRAYAG PRODUCT CODE NO 551 or equivalent on COMMANDER including taking sown old inbuilt cabinet all as specified and as directed.

S&F Brass chromium plated tumbler holder of make Jaquar Code: AKP-35741P all as directed by GE/Engg-in-Charge

Supply only 10 litres PVC valve less, Symphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and brackets complete.

Supply only in repair 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F Vitreous Ware wash down water closet (Pedestal), white (ETWC) and fixed in repairs including seat cover with brass screws and excluding flush pipe and flushing cystren

S&F for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

S&F 15mm dia Chromium plated 2 way Bib cock crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as spd & directed Code :OPP-CHR-15041PM Make- Jaquar or equivalent

S&F brass chromium plate hand shower(Health faucet) with 1meter long easy flex tube in chrome finish and wall hook with NRV (back flow preventer) of Code No : ALD-CHR-577make Jaquar or equivalent all as directed

S&F Towel rail 60cm long with lower hangers of CP with and including chromium plated brass screws and wooden /plastic cleats.

S&F SS 202 steel grade 5mm wire Thali basket of size (17x20x8) inch of luxury style Make or equivalent

S&F SS 202 steel grade 5mm wire Cup- saucer basket of size (17x20x4) inch of Make-luxury style Make or equivalent

S&F SS 202 steel grade Plain utility of size (17x20x4) inch of Make- luxury style Make or equivalent

S&F SS 202 steel grade 5mm wire plain utility of size (17x20x8) inch of Make-luxury style Make or equivalent

S&F SS 202 steel grade 5mm wire cutlery basket of size (17x20x4) inch of Make- luxury style Make or equivalent

S&F SS 202 steel grade 5mm thick wire Dustbin holder of size (9x12 ) inch of Make- luxury style Make or equivalent

S&F Telescopic channels 500mm regular Make - luxury style or equivalent

S&F Nickel and crom plated auto close hinges regular Make- Moda or equivalent.

S&F shutter in 18 mm waterproof marine ply with both lamination one side white and other side specified colour with edg binding Make - Marino or equivalent

S&F 600mm carecase made with MDF and doors with Marino ply with both side lamination one side white and other side specified colour with edg binding Make-Marino industries or equivalent

S&F Aluminium 'G' section handles Make -Luxury or equivalent complete all as specified.

S&F 20 G steel hollow section welded frame with powder coated (white colour) of various section for base frame all as specified and directed by Engineer-in-Charge.

S&Fply18mm thick lamination (white colour ) both side Innotek drawer (Heavy drawer capacity 35 Kg) Make - Moda or equivalent

S&F 20 mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, Screwed both ends for unions and fixed all as specified and directed.

S&F 25 mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for unions and fixed all as specified and directed.

S&F PVC SWR 75 mm bore pipe single socketed in any length with rubber ring joints fixed to walls all as specified and directed.

S&F PVC SWR 110 mm bore pipe single socketed in any length with rubber ring joints fixed to walls including taking down old one all as specified and directed.

S&F for 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule all as specified and directed.

S&F for 25 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule all as specified and directed.

Grubbing up plant including roofs and applying antiweed chemical in concrete surface and making good with PCC including necessary required scaffolding etc . Upto G+2 building all as specified and directed. Note: PCC will be measured and separately.

--ditto-- all as per Sr Item No 124 above but in brick masonry

M & L for repairs to ends of chajja by removing the old loose concrete material, cleaning the reinforcement and fishing the surface apply epoxy base resin of manufacturer Pidcrete and Chowkasi and make good with concrete 1:1.5:3 as required to exiting broken surface and fair and even in cement mortar 1:3 with epoxy coating and applying two coats of weather proof emulsion paint upto 600 mm depth and 100 mm thickness including necessary scaffolding as required at site Upto G+2 building all as specified and directed

Taking up/down steel tubing 15 mm bore and connection including cleaning/removal to store Complete all as specified and directed.

Taking up/down steel tubing 20 mm bore and connection including cleaning/removal to store Complete all as specified and directed.

Taking up/down steel tubing 25 mm bore and connection including cleaning/removal to store Complete all as specified and directed.

S&F GI water tubes of bore 15 mm dia tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and directed.

S&F GI water tubes of bore 20 mm dia tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and directed.

S&F GI water tubes of bore 25 mm dia tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and directed.

Supplying and laying 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including connecting to existing GI pipe line complete all as specified

Supplying and laying 25mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including connecting to existing GI pipe line complete all as specified

M&L for Providing and laying 60mm thick factory made glossy finished chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand all as directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete

M&L for Forming V grooves in plaster n exc 10mm deep and n exc 10mm on face

M&L for cutting of existing cracks on wall up to 10 mm deep and n exc 10 mm face and clean the groove properly and fill crack with filler materials with grunting machine up to last edge of crack in two coat and apply tow coat of wall care putty and 2 coat of oil bound distemper.

Taking down carefully existing unserviceable bitumen felt(any number of layers) including plaster of any thickness, wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall, PCC fillets, benching etc and removing of the rubbish to a distance not exceeding 500 m from the building and depositing where complete all as specified and directed

Demolition of plain cement concrete (unreinforced) in ground floor including concrete at junctions of parapets and roof terraces, flashing kerbs walls, PCC fillets, benching coving of chajjah top/junctions etc complete all as specified

Material and labour for providing plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) for roof, kerb, or mud stops, rounded or chamfered on edges etc complete all as specified and as directed.

M&L for rendering 10mm thick CM (1:4) on roof slab top mixed with water proofing liquid finished even and fair without using extra cement complete all as specified

M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under :- (i) Applying one coat of oil bound bituminous primer @ 0.25 kg/Sq. M (ii) Providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.5 Kg/Sqm reinforced with non-woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufactures (iii) Apply one coat of solar reflective bituminous aluminium paint @ 0.15 kg/Sqm over membrane over non assessable roof surfaces complete all as per manufactures instructions and as directed

Dismantling existing PVC water tanks of capacity exc 500 litres & n.exc 1000 litres all as directed and removed from site. NOTE:-Dismantled water tank shall become the contractor’s property as per Sch of credit.

S&F for 1000 litres rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F Ball brass valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule

M&L 75 mm thick cement concrete type C-2, 1:3:6 (Using 40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection including joints and bitumen complete all as specified and directed.

M&L 75 mm thick cement concrete 1:4:8 type D-2 (40mm graded aggregate) as in sub base for interlocking paver block complete all specified and directed.

Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete, including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed Engineer-in-Charge.

M&L for point wiring complete concealed type with two runs of 1.5 Sqmm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn through and including PVC rigid conduit not less than 20 mm dia with its accessories with Flush mounting modular metal boxes (upto 18 module suitable for Mylinc series of Legrand with and including white plates with frame upto 18 module of make suitable for Mylinc Series) for fixing switches/socket/regulators etc with and including 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth & connecting to earth dolly for the following, etc complete all as specified and directed by Engineer-in-Charge. Note :1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black)2. Wiring shall be done as per complaints received from user 3. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc

One light point /fan point controlled by one switch with cables 1.5 sq. mm size

One bell point controlled by one switch 5 Amp single pole, one way on independent board

One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch

One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board

One light point controlled by switch 5 Amp single pole two way

--ditto-- all as per Sr Item No 2 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase , Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board

S&F bell ding dong type electric 230V AC single pole etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 6 Amp, one way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 6 Amp, two way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 16 Amp, one way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Socket Outlet 6 Amp, 2/3 pin, combined two module etc complete all as specified and directed by Engineer-in-Charge.

S&F Modular Socket Outlet 6 Amp / 16 Amp - 2/3 pin combined two module etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Bell push, 6 Amp, one module etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Fan Regulator Fan step regulator, 120 Watt - two module etc complete all as specified and directed by Engineer-in-Charge

S&F lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge

M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge.

S&F in replacement double door Sheet metal enclosures factory made DBs 4 way TPN, 415 volts, protection class IP-42, suitable for fixing of MCBs etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management, Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed.

S&F MCB, SP, AC, 240 Volts of 06 to 32 Amp capacity 10 KA, 'B' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

S&F square profile LED lighting fixture, environmental friendly, energy efficient ready to use pack LED Tube light fitting 22 Watt aluminium housing with LED light source 6500 K, input voltage 140V-270V with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge Make: Phillips Smart bright batten or equivalent in other Make .

S&F square profile LED lighting fixture, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 12 Watt input voltage 140V-270 V with LED light source 6500 K with uniform light output, with all accessories including its connection with 2 core seathed cable of size 0.5 Sqmm with etc complete all as specified and directed by Engineer-in-Charge. Make: Phillips Smart bright batten or equivalent in other Make.

S&F Industrial switch socket 20 amps MCB includes all as specified and directed

S&F sub main wiring with two single core PVC insulated, unsheathed, FRLS stranded copper conductor cable 4 Sqmm with 4 Sqmm PVC insulated, unsheathed, FRLS stranded copper conductor cable as earth wire drawn through and including PVC Conduit ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note :1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 4 Sqmm cable i.e for one run for phase, one run for neutral with one run of 4 Sqmm cable for earth and one run of PVC conduit shall be measured as one unit.

S&F sub main wiring three phase with 6 Sqmm single core, 4 Run PVC insulated, unsheathed, FRLSH stranded copper conductor cable with 6 Sqmm, one Run PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge. Note : 1. Proper colour coding must be utilize for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Three run of 6 sq.mm cable i.e for three run for phase, one run for neutral with one run of 6 Sqmm cable for earth and one run of PVC Casing & Caping shall be measured as one unit

Taking out/down and opening of existing ceiling fans 1200 mm sweep, from any position, of any make etc & refixing at the desired location after reassembling and after servicing/overhauling by thoroughly cleaning the shaft, rotor, stator and applying lubricant/grease to bearings and one coat of super enameled varnish over winding to improve the insulation resistance including repair /replacement of spare parts/ material /items , making connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm upto 0.50 Mtr length including using material/parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, washers etc after cleaning the metal surface, greasing/lubricant etc to make it functional complete all as specified and as directed.

Material and labour for preparation of ceiling fans 1200 mm sweep, of any make by cleaning of metal surfaces including painting with spray painting on required gloss with white synthetic enamel paint on complete body of fans and writing MES No with black synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

Add to item 03006 for each additional 1.5m or part thereof in depth beyond the first 1.5 m complete all as specified and directed.

Returning filling in trenches excavated soil including spreading levelling watering and well ramming in layers n.exc 25 cm thick each layer as in soil complete all as specified and directed..

Removing excavated materials n.exc 50 mtr depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified nad directed.

Supply & laying of DWC(Double wall corrugated) HDPE pipe ISI marked with IS 16205 part 24 ( Pipe colour orange) of outer dia 120 mm polyethylene with smooth internal and profiled external surface for non-pressure underground cable including coupler and bends etc complete all as specified and directed by Engineer-in-Charge Make : Supreme / Infra / Astral/Prince/jain irrigation

Supply & laying of DWC(Double wall corrugated) HDPE pipe ISI marked with IS 16205 part 24 ( Pipe colour orange) of outer dia 63 mm polyethylene with smooth internal and profiled external surface for non-pressure underground cable including coupler and bends etc complete all as specified and directed by Engineer-in-Charge Make : Supreme / Infra / Astral/Prince/Jain irrigation

Supply & Fixing and testing of LT cable 1100 volts grade, XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) ISI Marked with aluminum conductor suitable for earthed system of size 400 sq mm 3.5 core in trenches, on poles and in ducts complete all as specified and directed by Engr in charge.

--ditto-- All as per Sr Item No 182 above but 300 Sqmm 3.5 Core

--ditto-- All as per Sr Item No 182 above but 120 Sqmm 3.5 Core

--ditto-- All as per Sr Item No 182 above but 50 Sqmm 3.5 Sqmm

--ditto-- All as per Sr Item No 182 above but 16 Sqmm 4 Core

M&L for GI Tubes, of size 150 mm dia Medium grade, galvanized, with all fitting , laid in trenches for protection of cable in road /drain crossing complete all as specified and as directed.

MLL for GI Tubes of size 80mm dia Medium grade, galvanized, with all fitting , laid in trenches for protection of cable in road /drain crossing complete all as specified and as directed.

M&L for road cutting upto 300 mm deep and 200 mm wide for crossing GI pipe line through road including making good the disturbed surface by filling mass concrete( 1:2:4) etc complete all as specified and directed by Engineer-in-Charge. Note : Rate of mass concrete is included in quoted rate.

Supply, installation, testing and commissioning factory made LT feeder pillar panel CPRI approved, size of panel as per CPRI Specification, double door floor mounted outdoor type, as per IP-65 grade, made out of CRCA sheet 3.15 mm thick of outer body of suitable size with aluminium bus bar 1200 Amps,4 strip,(3 phase & Neutral) complete drilled, insulated with colour coated insulation tape, mounted on insulators etc with RYB indicator, internal wiring with suitable size of copper wire, panel should be dust proof, vermin proof, powder coated, locking should be screw type, mechanical type, inter locking, should have danger notice for 415 volt, AC,mounted on 50 x50 x6 mm angle iron frame having minimum 2 feet ground clearance duly embedded in and including PCC block(1:2:4) type B1 foundation for fixing of panel complete including termination of all incoming and outgoing cables with suitable size thimbles/lugs and glands Nuts & Bolts complete all as specified and directed.(Main Panel)

Incoming : - (i) MCCB 800 Amp Thermal adjustable type with , 4 Pole,50 KA - 01 No. (Ics=100%Icu) (ii) Digital maltifunction meter with CT– 01 No. (iv) Indicating lamp LED type one set in incoming phases. (v) Internal wiring with PVC insulated copper conductor multi stranded cable 1100 Volt grade IS 694 marked of appropriate gauge including all copper lugs. (vi) Connection from MCCB to Busbar shall be of solid Aluminium conductor. (vii) MCCB shall be provided with suitable spreader of aluminium conductor for fixing of incoming cable. (viii) KWH meter CT operated as per suitable capacity of LT Panel.

Outgoing ways :- MCCB 400 Amps Thermal adjustable type ,4 pole,36 KA-01Nos (Ics=100%Icu ) MCCB 200 Amps adjustable type ,4 pole,36 KA-04Nos (Ics=100%Icu )

Supply, installation, testing and commissioning factory made LT feeder pillar panel CPRI approved, size of panel as per CPRI Specification, double door floor mounted outdoor type, as per IP-65 grade, made out of CRCA sheet 3.15 mm thick of outer body of suitable size with aluminium bus bar 600 Amps,4 strip,(3 phase & Neutral) complete drilled, insulated with colour coded insulation tape, mounted on insulators etc with RYB indicater, internal wiring with suitable size of copper wire, panel should be dust proof, vermin proof, powder coated, locking should be screw type, mechanical type, inter locking, should have danger notice for 415 volt,AC, mounted on 50 x50 x6 mm angle iron frame having minimum 2 feet ground clearance duly embedded in and including PCC block(1:2:4) type B1 foundation for fixing of panel complete including termination of all incoming and outgoing cables with suitable size thimbles/lugs and glands Nuts & Bolts complete all as specified and directed. Sub Panel

Incoming : - (i) MCCB 315 Amp Thermal adjustable type with , 4 Pole,36 KA - 01 No. (Ics=100%Icu) (ii) Digital multifunction meter with CT– 01 No . (iii) Indicating lamp LED type one set in incoming phases. (iv) Internal wiring with PVC insulated copper conductor multi stranded cable 1100 Volt grade IS 694 marked of appropriate gauge including all copper lugs. (v) Connection from MCCB to Busbar shall be of solid Aluminium conductor. (vii) MCCB shall be provided with suitable spreader of aluminium conductor for fixing of incoming cable. (viii) KWH meter CT operated as per suitable capacity of LT Panel.

Outgoing ways :- MCCB 160 Amps Thermal adjudtable type ,4 pole,25 KA-02Nos (Ics=100%Icu ) MCCB 100 Amps adjustable type ,4 pole,25 KA-01Nos (Ics=100%Icu )

Supply, installation, testing and commissioning factory made LT feeder pillar panel CPRI approved, size of panel as per CPRI Specification, double door floor mounted outdoor type, as per IP-65 grade, made out of CRCA sheet 3.15 mm thick of outer body with Aluminium bus bar 200 Amps, 4 strip,(3 phase & Neutral) complete drilled, insulated with colour coded insulation tape, mounted on insulators etc. Panel should be dust proof, vermin proof, powder coated ,locking should be screw type, mechanical type, inter locking, should have danger notice for 415 volt, AC, mounted on 50 x50 x6 mm angle iron frame having minimum 2 feet ground clearance duly embedded in and including PCC block(1:2:4) type B1 foundation for fixing of panel complete including termination of all incoming and outgoing cables with suitable size thimbles/lugs, glands , Nuts & Bolts complete all as required and directed. (i) Incoming MCCB 4P 125Amp, 25 KA -01 No( Ics = 100% Icu) (ii) Phase indicating LED lamps (R-Y-B) -01 set

Note for item no 191, 192 & 193 (i) The Panel Should be approved by CPRI. (ii) The rates Quoted shall include for earth work, Plinth protection around the panel apprx 75cm and excavation for angle iron frame for foundation of panel board up to 0.50 m below GL in any type of soil and PCC 1:4:8 type D2 filling in foundation. The ground clearance of panel board shall be 0.40 M from GL to the bottom of panel board.

M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6mm thick buried vertically in ground not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 mtr below ground level and connected to GI strip 32x6 mm by means of nuts, bolts and washers and encased in and including 15 dia GI medium grade pipe upt 2.4 mtr height form ground level fixed by MS flat iron clamp 40mm x 5mm with nut, bolt and washers, GI strip fixed to base along pole and connected to overhead line for providing earthing to HT pole/feeder AB switch LA complete with charcoal dust, salt packed around plate 150 mm thick including watering GI pipe, medium grade 40 mm dia with blanking cap 1.5 mtr long fixed to funnel with wire mesh complete with PCC chamber and RCC chamber over all as per Electrical Plate No 5 of SSR Part I - 2009 incl excavation and earth work in any type of strata and testing on completion.

M/s AG PATHAN (BID ID -3103843)

M/S. M. F. Sharif & Co. (BID ID -3119644)