REPAIR /REPLACEMENT TO KITCHEN CUPBOARDS, GI TUBLINGS, BATHROOM AND TOILET REPAIRS IN QTRS OF KARAM VIHAR IN AOR OF AGE B/R-II UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc 4 sqm each, complete all as specified and directed.

Taking down shutters of any description not exceeding 2.00 Sqm each, complete all specified and directed.

Refixing doors shutters in same opening or other location of any description not exc 2.0 sqm, complete all specified and directed.

Refixing doors shutters in same opening or other location of any description exc 2.0 sqm, complete all specified and directed.

Dismantling wrought iron or mild steel work any description including doors, gates etc., complete all as specified & directed.

S & F mild steel framed work such as in door frame, door shutters / gate of angle or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified.

S & F 1.25 mm thick Pressed steel frames size 105 mm x 60 mm for doors with one rebates including necessary fixing lugs/ hold fasts with PCC in walls/RCC etc , 3 or 4 No's heavy MS hinges , lock strike plate, etc and including back filling with PCC in 1:3:6 (using 12.50 mm graded stone aggregate) completed all as specified & directed

S & F 1.25 mm thick Pressed steel frames size 125 mm x 60 mm for doors with double rebates including necessary fixing lugs/ hold fasts with PCC in walls/RCC etc , 6 or 8 No's heavy MS hinges , lock strike plate, etc and including back filling with PCC in 1:3:6 (using 12.50 mm graded stone aggregate) completed all as specified & directed

S&F factory made flush door shutter 35mm thick solid core construction with Block board and plywood face panels, commercial type on both sides. complete all as specified and as directed.

S&F factory made 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part -I section 8 clause 8.24 (a) supplied and fitted to chowkats.

S & F anodised aluminium frame for doors, windows, ventilators with Powder Coating (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified

M&L aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double revated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.

S & F anodised aluminium window and ventilator shutters, with Powder Coating (minimum thickness of powder coating 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 Kg/Rm including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), complete all as specified.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed.

S & F Factory made solid panel PVC door/cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suippling and fixing in the frame at site as per specification in SSR Part-I. complete all as specified and directed by Engr-in-Charge.

S & F in repair 18/19 mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice laminations , fixed with SS screws to hinges and timber/steel frame work for kitchen cupboards , shelves, including tape on edge's & including frame work and etc including taking down old any type cupboards , shelves etc all as specified and directed.

S & F in repairs for kitchen & Wardrobe / cupboard with 16-18 mm thick one side decorative and other side balancing lamination factory pressed WPC Board levies of action Tesa and equivalent including 2 mm thick PVC edge banding tape with hot glue by edge bending machine etc with auto closing spring loaded hinges (hydraulic type) etc including necessary accessories like Magnetic catch etc .Board make- Action Tesa and equivalent as per IS:14587:1998 fixed including dismantling of existing complete all as specified.

S & F 100mm size butt hinges stainless steel complete all as specified and as directed.

S & F 150 mm size aluminium anodised, handles cast type anodised complete all as specified and directed

S & F 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 250 mm long aluminium alloy, anodised siding door bolts, with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiums alloy and fixed

S&F 300 mm size mild steel ordinary rat & tail rod pattern spring (Helical) including rollar & rollar plate fixed to wooden / MS frame complete all specified and directed.

S&F in repair 300 mm size mild steel ordinary rat & tail rod pattern spring (Helical) including rollar & rollar plate fixed to wooden / MS frame complete all specified and directed.

Hacking out old broken glass from wooden frames and steel frame or stone, concrete or brick surrounds , glazed with putty or fixed with beads.

S & F 3mm thick sheet glass , ordinary quality and glazed with oil putty in square not exc 0.5 Sqm in each pane fixed, complete all as specified and directed.

S & F 3 mm thick figured glass , pin head type and glazed with oil putty in square not exc 0.5 Sqm in each pane fixed, complete all as specified and directed.

S & F stainless steel wire cloth 0.36mm normal dia of wire and average width a apparture 0.56 mm and fixed with tinned tacksor stainless steel wire staples as specified and directed.

S & F in repair stainless steel wire cloth 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed.

M&L mild steel Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of watertanks and similar work .

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of 30 mm width complele all as specified and as directed.

S & F aluminium anodised Hasp & Staple of size125mm safety type including bolt to hinge plate and fixed with screws

S & F 40 mm dia cupboard knobs fixed with nuts, screw and washers of mild steel bright finished, powder coated, fancy type complete all as specified and directed.

S & F 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complele all as specified and as directed.

S & F in repairs 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complele all as specified and as directed.

S & F magnetic catches for cupboard , shelves, etc

S & F 75 mm size cup board locks of brass including keys set,2 levers, complete all as specified and as directed.

S & F for stainless steel 125mm long cupoard handles fixed with nut, screw and washer of stainless steel, complete all as specified and as directed.

S & F in replacement stainless steel Curtain Rod 20 mm dia with brackets fixed with stainless steel screws and including side finnels and bracket for fixing to wall etc, complete all as specified and as directed.

M&L 4mm thick desginer ceiling board ( Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instruction, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33 mm thick galvanized steel sheet & size T-24x32 mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 2 mm dia fixed rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runner at 600 mm c/c to from 600 x 600 mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19 x19 mm of white colour all as per instructionand including dismantling of walls and celing existing old board (fibre pulp.insulation etc)or insulation boards/slabs/blanks any thickness including cover fillets etc including two coat of OBD over a coat of chalk whitening putty complete all as specified and directed.

M & L 10-12 mm thick polymer modified readymix cement based plaster Make : Ultratech (Brand name Readiplast) complying to IS-1661-1972, IS-2250-1965, IS-2402-1963) or equivalent as approved by GE, applied in ratio 1:6 as per manufacturer's instructions, on fair faces of brick masonry or concrete surfaces finished even and smooth, including taking down of existing cement or cement lime plaster of any thickness and any description on brick or stone walls including raking out joints, hacking for key and scrubbing down with water, complete all as specified and as directed.

M & L 10-12 mm thick polymer modified readymix cement based plaster Make : Ultratech (Brand name Readiplast) complying to IS-1661-1972, IS-2250-1965, IS-2402-1963) or equivalent as approved by GE, applied in ratio 1:4 as per manufacturer's instructions, on fair faces of brick masonry or concrete surfaces finished even and smooth, including taking down of existing cement or cement lime plaster of any thickness and any description on brick or stone walls including raking out joints, hacking for key and scrubbing down with water, complete all as specified and as directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of primer and 1mm wall putty, complete all as specified and directed.

M&L for preparation of newly plastered or unplastered wall surfaces and applying two coat of acrylic emulsion exterior 1st quality over and including a coat of water based primer, and 1mm thick wall care putty, tint and pattern as approved by GE complete all as specified. Note:- This item includes use of necessary scafffolding and safety net up to G+5 storey building.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 and including demolition of old brick/ PCC block masonry complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provide.

M L for PCC 1:3:6 type C-2 (using 40 mm graded Aggregate) as in sunkern floor , foundation mass, concrete etc all as specified and directed.

M & L for 25 mm Thick PCC type B-0 1:2:4 (12.5mm graded aggregate) as in flooring, under Tiles and etc all as specified and directed.

M&L for water proofing treatment to sunken slab including demolition upto existing RCC slab complete all as specified and directed.comprises the following operations/stage:- (a) The surface shall be rendered clean prior to application of coating. Mechanical grinding of the surface shall be done so that it is free of dust, debris and oil deposits. (b) Removing all loose material, like cement slurry, mortar, plaster and other unwanted particles, which may prove hurdle between chemical and concrete bond. (c) Cleaning the surface with soft brush to make it clean and dust free. (d) Providing and laying of a 75 x 75 mm coving with polymer modified mortar at floor wall joints wherever necessary. (e) Providing and applying 1 coat of Asian Paints Smartcare Repair Polymer mixed with cement in ratio of 1: 2 over the entire clean and prepared surface as a sealer coat. (f) Supplying and applying two component Asian Paints Smartcare Ultra Block 2k acrylic polymer modified high performance coating system, brush applied, membrane with an elongation of >220% and tensile strength of 1.72 MPa as per ASTM D 2370:2016, crack bridging ability of 3 mm as per EN 1062-7:2004, no leakage up to 5 bars of water pressure. The system includes final base preparation, applying the coating in two coats with a total consumption of 2.25kg/sqm. (g) Providing and laying 25 mm thick cement sand plaster admixed with integral water proofing compound @ 200 ml per bag of cement (1 Cement: 4 Sand) followed by neat cement punning. (h) Water testing (pond test) shall be carried out for 48 hrs.

M & L for Non-Skid coloured ceramic tiles 7-8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and inculding 15mm thick avg screed bed in CM 1:6 inclduing dismantling of the same, complete all as specified and directed.

M & L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick avg screed bed in CM 1:6 inclduing dismantling of the same, complete all as specified and directed.

M & L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick avg screed bed in CM 1:6 inclduing dismantling, complete all as specified and directed.

Description all as specified in item No 51 as above light shade tiles but on vertical surface such as in skirting/dado etc over backing coat of 10mm thick rendering CM (1:4) inclduing dismantling, complete all as specified and directed.

M & L Coloured Glazed ceramic tiles in vertical surface 450 x 300 x 7-8 mm thick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over and including 10 mm thick screed bed in CM 1:4 inclduing dismantling, complete all as specified and directed.

M & L for 16 to 18 mm thick granite (of any type) work( table rubbed and polished) in jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including 10 mm thick screed bed in CM 1:4 including rounding to edge of granite as per required, complete all as specified and directed.

M & L for machine cut kota stone slab 20-22 mm thick as in flooring laid over and incl cement screed bed 20 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description and fixed at top of the roof complete all as specified and directed

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description and fixed at top of the roof complete all as specified and directed

S&F steel water tubing galvanised 15mm bore medium grade fixed to walls, under floors and on ceiling surfaces , including cutting chases , pipning in making good to facings where required and pointing in Cement mortar 1:3 for concealed water tubing or conduit pipe etc and including taking up or down old steel tubing 15 mm bore and connecetions in any postion etc complete all as specified and directed.

S&F steel water tubing galvanised 20 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 20 mm bore and connecetions in any postion etc complete all as specified and directed.

S & F in replacement 20 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed

S & F in replacement 15 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed

S&F in replacement 15mm angle valves, chromium plated cast copper alloy, polished body screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15mm bore steel tubing complete all as specified & directed.

S & F in replacement 15 mm bore Stop valves, cast copper alloy , fancy type , chromimum plated with long shank and cup (concealed type) both ends for iron pipe or for unions. complete all as specifed and directed.

S & F in replacement 15 mm bore bib tap chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. complete all as specifed and directed.

S & F in replacement 15 mm bore bib tap (long body) ,fancy type chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. complete all as specifed and directed.

S&F in replacement 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. complete all as specifed and directed.

S&F in replacement Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. Make : Hindware /Jaquar or equivalent as approved by GE

S&F in replacement brass chromium plated wall mixture 3 in 1 system with provision for hand shower and over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. Make : Cera/Hindware/Jaquaror equivalent as approved by GE

S&F in replacement of 80 mm bore Flanged Cast Iron Sluice Valve, class PN 1.6 ISI Mark conforming to IS-14846-2000, flanged ends drilling having stainless steel spindle with cast iron wheel at top complete with including nut and bolt washers and rubber gasket complete, including taking down old unserviceable sluice valve, complete all as specified and directed. Make : Kirloskar/ Tata/ BIR.

S&F in replacement of 150 mm bore Flanged Cast Iron Sluice Valve, class PN 1.6 ISI Mark conforming to IS-14846-2000, flanged ends drilling having stainless steel spindle with cast iron wheel at top complete with including nut and bolt washers and rubber gasket complete, including taking down old unserviceable sluice valve, complete all as specified and directed. Make: Kirloskar/ Tata/ BIR.

S & F in replacement Two way Angle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repairs, complete all as specified and as directed.

S & F in replacement PVC connections 15mm size with PTMT nuts of length 600 mm.

S&F in repairs health faucet chromium plated brass with 1.00m CP long flexible pipe and brass chromium plate nuts completed all as spd Make - Cera / Hindware/ Jaquar or equivalent as approved by GE.

S & F in replacement CP brass jet spray for EWC with 1 to 1.5 mtr (as reqd) long flexible stainless steel connecting pipe 15mm bore, fixed in repairs, complete all as specified and as directed.

S & F in replacement SS soap dish, fixed in repairs, complete all as specified and as directed.

S & F in replacement Stainless steel Grating dome 125mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.

S & F in replacement mild steel chromim plated Towel ring fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, fixed in repairs, complete all as specified and as directed.

S&F in replacement of mild steel CP towel rail 600mm long fixed with and including chromium plated brass screws and and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified.

S & Fin replacement CP shower rose fancy type 150mm x 150mm size with 300 / 600 mm long shower arm, fixed in repair to 15mm bore pipe, complete all as specified and as directed.

S&F in repairs of 32mm brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, unions and cap and fixed, complete all as specified and directed.

S & F 32/40mm spring type PVC waste pipe fixed to WHB and sink (Note minimum length of each pipe should not be less than 0.80RM), fixed in repairs, complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm.

S & F in reapir stainless steel kitchen plate rack size 600mmm x 750 mm x 200 mm including fixing on wall etc.

S & F in repair full pedestal pattern wash hand basin, size of basin 630mm x 510mm and pedestal of 900mm long colour as approved by GE including brakets , chromium plated brass waste coupling etc complete all as specified and as directed.

Providing services on related to plumbing work carried out by deploying a team of plumbers with helper as required for 01 x shaft area of multistory (G+9) building from top of roof up to bottom of bldg floor wise through shaft area in one go for repair / maintinance to leakageing , damaged , broken , loose PVC (SWR) Pipe/CPVC Pipe (any dia and size) , bends etc including taking down, easing and refixing in the same position as required etc complete all as specified and directed. Note :- (1) In case contractor fails to complete the above task as per scheduled programme a damage of Rs 1000/- per day shall be deducted from his payment. 2) Necessary T&P, ladders,minor consumable viz white cementetc, equipments and safety gear shall be provided by the contractors. 3) All material/ accessories/Items as required for maintenance shall be measured under relevant item of BoQ. (4) The above work /task will also include for High rise bldgs and shaft area of high rise bldgs (One shaft work as one Job)

S&F in reapir Vitreous China wash basin, white, flat back, size 550 x 400 mm including , chain and plug but including brackets or erecting stand including & (32 mm -45 gms/40mm-60 gms ) waste coupling of CP complete all as specified and dirtected by Engr-in-Charge .

S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap , seat cover with connection to drain and to flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed.

S&F in repair 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket etc complete all as specified and directed

S & F in repair flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and directed.

S & F in repair 100 /110 mm dia PVC floor trap , with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S & F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to wall completed all as specified and directed (Note : The quoted rate is inclusive of necessary scaffolding for Pipe work executed in shaft area upto the 10 storey building).

S & F repair 110 mm PVC (SWR) bends with acess door completed all as specified and directed

S&F repair 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints ,laid in trenches or in floor or in wall complete all as specifed and directed.

S & F in reapir 75 mm dia PVC Bends with access dooe complete all as specofied and directed

S & F in reapir 110 mm dia singleTEE for PVC (SWR) pipe complete all as specified and directed

M & L for preparation of old decorated brick/concrete /plastered/un-plastered surfaces of walls pillers, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots including cracks/holes in surface filling with white putty and applying two coat of white wash complete all as specified and directed.

Description all as per Item No 97 above but one coat of white wash on celling surafce etc complete all as specified and directed.

Material and Labour for preparation of old decorated surfaces of wall (plastered or un-plastered) including cornices, pilaster etc by brooming down with steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat distemper oil bound distemper (white or tinted) on walls complete all as specified and directed.

Description all as per Srl Item No 99 above but one coat of oil bound distemper on celling surafce etc complete all as specified and directed.

M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surfaces and applying two coat of oil bound distemper of approved shade/tint over and including one coat of 1 mm thick birla wall care putty to achieve smooth finish complete all as specified & directed.

M&L preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint of tint / shade as approved complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces of any description over 10cm width or girth and applying two coat of synthetic enamal paint of tint as approved complete all as specified and directed.

M&L preparation of old plastered outer wall surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels made by wooden beads with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified including using white cement in place of grey cement for grit wash complete all as directed.Note:- This item includes use of necessary scafffolding and safety net up to G+8 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate.

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and directions of Engineer-in-charge.Note:- This item includes use of necessary scafffolding and safety net up to G+8 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate.

S & F in repair 32mm dia CP waste coupling, for WHB, with long screwed shanks and fly nuts, flange and based in red lead cement and fixed all as specified.

S & F in repair 40mm dia CP waste coupling, for WHB, with long screwed shanks and fly nuts, flange and based in red lead cement and fixed all as specified.

M & L for prepapration of new or previously untreated surfaces of wood or based materials of any description not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint coat complete all as spd and as directed.

M&L for two coats of synthetic enamel paint over a coat of zinc chrome/red oxide primer including preparation of new or previously untreated steel surfaces over 10 cm in width or girth.

Supplying and laying of CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings union/bends/tee/elbow etc and taking down of old pipes complete all as specified.

Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings union/bends/tee/elbow etc and taking down of old pipes complete all as specified.

S&F in repairs extruded aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed.

S&F in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair 100 mm hinges MS Butt hinges medium weight cold rolled. complete all as specified and directed.

S&F in repair 75 mm hinges MS Butt hinges medium weight cold rolled. complete all as specified and directed.

S&F in repair 100 mm long aluminium handles, cast type anodied for alluminum windows complete all as specified and directed.

S&F in replacement CPVC Brass Elbow fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F in replacement CPVC Brass Elbow fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F in replacement CPVC Brass TEE fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F in replacement CPVC Brass TEE fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F in replacement CPVC Brass UNION fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F in replacement CPVC Brass UNION fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F in replacement CPVC Brass FTA female adaptor/tee/socekt fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F in replacement CPVC Brass FTA female adaptor/tee/socket fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F in replacement of brass spindles (1 to 6 Number) for bib tap/angle valve/wall mixer/basin mixer etc complete all as specified.

Providing services related to welding & black smith work for the repair to steel windows shutters,grills,doors,rolling shutters and other steel works etc including taking down, easing and refixing in the same position as reqd complete all as specified and directed. Note :- (1) the above task shall be carried out by deploying a min 01 welder having black smith skills on day basis from 0900 hrs to 1700 hrs. (2) In case contractor fails to complete the above task as per scheduled programme a damage of Rs 1000/- per day shall be deducted from his payment. 3) Necessary T&P, ladders,minor consumable viz welding rods/extras, welding machine, equipments and safety gear shall be provided by the contractor. 4) All maintenance material/accessories as reqd shall be issued from MES store to complete the maintenance task only ( as decided by JE incharge) and dismantled old unserviceable item shall be deposited back to MES store yard. (5) The above work /task will also include for High rise bldgs and shaft area of high rise bldgs.

NOTE:- (a) The work mentioned here-in-above all items shall be carried out in multi storey buildings (G+9) which may require scaffolding or Jhulla arrangements or any other T&P items shall deem included in the quoted rates by the contractor. (b) All the above items including S&F of water tanks to be executed on top of roof slabs of multi storey buildings (G+9) (c) Laying CPVC/GI/PVC drain pipes to be carried out from top of roof slap up to bottom of bldg floor wise through shaft area and as per site requirement and as directed by Engr-in-Charge. (d) All debris obtained from demolition item shall be removed from the site at daily basis to avoid any seepage/leakage from roof slab and deposit the debris out of the MoD land. (e) Roof of bldg shall be made free of schrubs/vegetation/plantation growth as and when directed by the Engr-in-charge and and the same shall be deemed to be included in the rates quoted by the contractor.

MS BUILDTECH (BID ID -3492556)

M/S SIMRAN CONSTRUCTION CO (BID ID -3495211)