REPAIR/RESURFACING TO CERTAIN ROADS AND CONNECTED ITEMS AT RATNUCHAK MIL STN UNDER GE KALUCHAK

Amount

Repair to pot holes, exceeding 30mm depth, not exceeding 01 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, and applying evenly a priming tack coat with bituminous primer (Viscosity Grade Paving Bitumen of Grade VG-30) at the rate of 5 Kg per 10 Sqm of surface, putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 Kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings), complete all as specified and as directed.

100mm (average thickness) soil/earth in road berms spread,rolled and consolidated to gradient and camber required complete all as specified and directed

32 inches (80cm) dia Polycarbonate convex mirror with 75mm dia 2.5 Mtr long iron pole and bracket for fixing of convex mirror with 2 coat of synthetic enamel paint over one coat of red oxide of iron pole including excavation and filling of PCC 1:3:6 type C2 for fixing of pole as required height , fixed in repair complete all as specified and directed

Scarifying or picking gravelled, macadam or bituminous macadam surface in area not exceeding 400 Sqm and depth exceeding 50mm and not exceeding 100mm deep and removing the rubbish away from site to distance not exc 50mtrs, complete all as specified and directed

Premix bituminous macadam with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade VG-30 grade by weight of total mix (Consolidated thickness 75mm or less), laid / rolled and compacted to required gradient and camber using power roller 8 to 12 tonne, complete all as specified and directed

Preparing existing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air blower to remove all loose dirt/foreign materials and applying evenly a priming tack coat with bituminous primer (Viscosity Grade Paving Bitumen of Grade VG-30) at the rate of 5 Kg per 10 Sqm of surface laying bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5 % binder content by weight of total mix and 4% stone dust conforming to specification for filler as per IRC-95, 1987 (filler) prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller, complete all as specified and as directed.

Cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and incl MS stud of suitable size as per manufactures instructions, incl taking down old unsv cat eyes fixed in repair complete all as specified and directed

Solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. fixed in repair fixed in repair complete all as specified and directed

Delineator with two nos 100mm dia highly reflective reflectors and two rectangular reflectors of size 70mm x 23mm, fixed on both sides of guide post, moulded in ABS plastic and mounted on MS pipe of 50mm dia and 1010mm long duly powder coated including necessary earthwork in any type of soil & PCC 1:3:6 type C2 block of size 300x300x300mm fixed in repair complete all as specified and directed

Marking lines, dashes arrows etc of any description not exc 10cm width/girth and not less than 2.50 mm thickness on road surface using hot applied thermo plastic road marking paint mixed with radium glass beads @ 250 gms/Sqm with automatic machine to provide reflectivity and night vision (approximate temperature being 200° Celsius at the time of laying) including cleaning the surface by removing all dirt, dust & all other foreign matters, demarcation at site and traffic control, complete all as specified and directed

M/S VED PAUL MAHAJAN (BID ID -3168566)

J.R.G CONSTRUCTIONS (BID ID -3170551)

SAINT SOLDIER ENGINEERS AND CONTRACTORS PVT. LTD. (BID ID -3170855)

AHMED CONSTRUCTIONS AND INFRA PVT LTD (BID ID -3175261)

VARUN JAMWAL (BID ID -3170344)

M/s Khajuria Construction Co. (BID ID -3169642)