GE/ALP (8231B) KOLKATA OF 2023-24

Amount

CHAIR VARENDAH (MS) : Supply and fixing for 20 mm dia, 16 Gauge thick MS conduit pipe of required length/size to be fixed duly arc welded and level the surface to make smooth and painted with one coat of red oxide zinc chrome primer after with and including dismantling the rusted/damaged leg/seat/back rest frame carefully without disturbing the adjoining parts of CHAIR VARENDAH ( MS ) complete all as specified and directed. Note : Ref drawing No FD-19,256,359

Material and labour for MS rod of 10 mm dia as connector of the front legs for chair verandah MS complete all as specified and directed. Note : Ref drawing No FD-19,256,359

Material and labour for removing of worn-out unserviceable cane & preparation of surface for painting by scraping old /fainted paint with sand paper/ machine or emery paper as applicable to make surface smooth and filing uneven gaps with putty there by make equal level with adjacent surfaces and there after applying synthetic enamel paint of approved shade/brand for chair verandah MS complete all as specified and directed. Note : Ref drawing No FD-19,256,359

Supply and fixing for caning with approved shade of plastic cane of 4 mm wide, 0.5 mm thick half-round as per godrej pattern white in colour as shown in the drawing "Mat pattern" for chair verandah MS complete all as specified and directed. Note : Ref drawing No FD-19,256,359

Supply and fixing for PVC shoe cap for chair verandah MS after with and including dismantling of worn out damaged unserviceable one complete all as specified and directed. Note : Ref drawing No FD-19,256,359

TEAPOY VARENDAH : Supply and fixing for 20 mm dia, 16 gauge thick MS conduit pipe of required length/size to be fixed after with and including dismantling the damaged leg/ frame carefully without disturbing the adjoining parts of TEAPOY VARENDAH complete all as specified and directed. Note : Ref drawing No FD-208

Supply and fixing for 19 mm thick pre laminated MDF board exterior grade (OSL) as on table top of TEAPOY VARENDAH with 4mm thick teak wood beading allround the top including polishing after and including taking down old unservicable top complete all as specified and directed. Note : Ref drawing No FD-35/208

Material and labour for preparation of surface for painting by scraping old /fainted paint with sand paper/ machine or emery paper as applicable to make surface smooth and filing uneven gaps with putty there by make equal level with adjacent surfaces and there after applying synthetic enamel paint of approved shade/brand for TEAPOY VARENDAH complete all as specified and directed. Note : Ref drawing No FD-35/208

Supply and fixing for hard rubber toe for TEAPOY VARENDAH after with and including dismantling of worn out damaged unserviceable one complete all as specified and directed. Note : Ref drawing No FD-208

CHAIR SCHOOL WITH HAND BOARD : Supply and fixing for PVC trough seat made of 4mm thick with 4x10 mm ribs moulded integrally and the same to be fitted to the frame with aluminum alloy screws after with and including removing feded/broken seat for chair school with hand board complete all as specified and directed. Note : Ref drawing No TP-Godrej/FD/E6/MAP/05

All as per item No 3 here in before but 18 mm thick pre-laminated particle board of exterior grade OSD and edges with 1.5 mm thick PVC beading with wire nails as hand board after with and including removing of old unserviceable hand board for chair school with hand board complete all as specified and directed. Note : Ref drawing No TP-Godrej/FD/E6/MAP/05

All as per item No 3 here in before but welding the disjointed MS plain bar shelf under the seat wherever required complete all as specified and directed. Note : Ref drawing No TP-Godrej/FD/E6/MAP/05

All as per item No 3 above but painting the steel frame of chair with two coats of black synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Note : Ref drawing No TP-Godrej/FD/E6/MAP/05

Supply and fixing for PVC shoe cap for chair school with hand board after with and including dismantling of worn out damaged unserviceable one complete all as specified and directed. Note : Ref drawing No TP-Godrej/FD/E6/MAP/05

CHARPOY GI PIPE : Removing the unserviceable ply /particle board /nylon newar from the charpoy GI Pipe complete all as specified and directed. Note : Ref drawing No FD-220 and CEKZ/TD/556

Material and labour for tightening the legs, junction points of long rail & short rail with pipe wrench, duly fixing with existing check nuts for becomes stable complete all as specified and as directed. Note : Ref drawing No FD-220 and CEKZ/TD/556

Supply and fixing for 32 mm dia GI Pipe medium grade long rail of 1890 mm long duly threaded the ends upto 22 mm size as shown in the drawing after with and including removing the old unserviceable long rail (whose thread ends were broken either at one end or both by loosing existing check nuts and elbows complete all as specified and directed. Make:BANSAL/BST/SWASTIC Note : Ref drawing No FD-220 and CEKZ/TD/556

Removing existing unserviceable short rail (whose thread ends were cracked) and fixing of 32 mm dia GI Pipe medium grade short rail of 813 mm long, 32mm dia GI pipe retrived from long rail i.e item No 4.02, duly threaded the ends upto 22 mm size as shown in the drawing complete all as specified and directed. Note : Ref drawing No FD-220 and CEKZ/TD/556

Removing existing unserviceable leg (whose thread ends were cracked) and fixing of 32 mm dia GI Pipe medium grade leg of 410 mm long, 32mm dia GI pipe retrived from long rail/short rail i.e item No 4.02 & 4.03, duly provided with 6 mm thick MS base plate duly welded & painted with two coats of black paint as shown in the drawing complete all as specified and directed. Note : Ref drawing No FD-220 and CEKZ/TD/556

Supply and fixing for 32mm dia 3 way elbow (ISI marked) for the joints of long /short rails as shown in the drawing after with and including dismantling of the same complete all as despecified and directed. Note: Ref drawing No FD - 220 and CEKZ/TD/556

Supply and fixing for 6mm thick check nut for the corner joints of long/short rails as shown in the drawing after with and including dismantling of the same complete all as specified and directed Note: Ref drawing No FD 220 and CEKZ/TD/556

Supply and fixing for 25mm dia medium grade GI pipe short rail of 890 mm long duty welded the ends to the long rail at an equal distance as shown in the drawing for resting the ply top for each charpoy GI and 6mm thickm MS Plate size (120 x 20mm) duly welded and painted to enable connecting 25mm dia GI piep & 32 mm dia GI pipe from undemeath rails for better grip while placing the ply top complete all as specified and directed. Make : BANSAL/BST/WASTIC Note : Ref drawing No FD - 220 and CEKZ/TD/556

Supply and fixing of 12mm thick BWR grade Ply wood of size 6'6" x 3’ over the long rails & short rails through drilling holes in ply top and fixed with nickel nut, bolt and washer. The edges of ply should be applied mixture of french chalk powder shellac & solvent and added colour for smooth finish irrespective of drawing complete all as specified and directed. Note : Anchor/alisan/Swastic/Eco brand. Note : Ref drawing No Fd-220 and CEKZ/TD/556.

TABLE CLERK STEEL/ TYPIST STEEL : Supply and fixing as in repair of drawer of table clerk steel and typist steel with two coats of olive green paint over a coat of red oxide zinc chrome primer complete all as specified and directed. Note : Ref drawing No FD-84(M)/1004/1005

Supply and fixing for 19mm thick pre laminated particle board exterior grade (OSL) as on table top of table clerk steel and typist steel with 4mm thick teakwood beading alround the top including polishing after and including taking down old unserviceable top complete all as specified and directed. Make: Ecoboard/Centurylam/Duratuff/Nuwud Note : Ref drawing No FD-84(M)/1004/1005

Material and labour for preparation of old painted steel surfaces of table office clerk steel / typist steel by scraping with emery paper, cleaning, re-dusting, making the surface smooth and applying one coat of synthetic enamel paint of approved shade/olive green/black as per direction of approved quality complete all as specified and directed. Note : Ref drawing No FD-84(M)/1004/1005

TABLE OFFICE OFFICER STEEL : Supply and fixing as in repair of drawer with table office officer steel with two coats of olive green paint over a coat of red oxide zinc chrome primer complete all as specified and directed. Note : Ref drawing No FD-84(M)1003

Supply and fixing for 19mm thick pre laminated particle board exterior grade (OSL) as on table top of table office officer steel with 4mm thick teakwood beading alround the top including polishing after and including taking down old unserviceable top complete all as specified and directed. Make: Ecoboard/Centurylam/Duratuff/Nuwud Note : Ref drawing No FD-84(M)1003

Material and labour for preparation of old painted steel surfaces of table office officer steel by scraping with emery paper, cleaning, re-dusting, making the surface smooth and applying one coat of synthetic enamel paint of white shade/olive green/black as per direction of approved quality complete all as specified and directed. Note : Ref drawing No FD-84(M)/1003

TABLE (900X600) : Supply and fixing as in repair of drawer of table of size 900mm x 600mm with two coats of olive green paint over a coat of red oxide zinc chrome primer complete all as specified and directed. Note : Ref drawing No FD-1008

Supply and fixing for 19mm thick prelaminated particle board exterior grade (OSL) as on table top of Table (900X600) with 4mm thick teakwood beading alround the top including polishing after and including taking down old unserviceable top complete all as specified and directed. Make: Ecoboard/Centurylam/Duratuff/Nuwud Note : Ref drawing No FD-1008

Material and labour for preparation of old painted steel surfaces of table (900x600) by scraping with emery paper, cleaning, re-dusting, making the surface smooth and applying one coat of synthetic enamel paint of white shade/olive green/black as per direction of approved quality complete all as specified and directed. Note : Ref drawing No FD-1008

Supply and fixing as in repair 25 mm square MS pipe of 16 guage thick standard steel for tables complete all as specified and directed. Note : Ref drawing No FD-84(M)/165/ 1003 /1004 /1005 /1008

Supply and fixing for hard rubber shoes of steel table's legs complete all as specified and directed. Note : Ref drawing No FD-84(M)/165/ 1003/1004/1005/1008

Supply and fixing for 4 lever lock with flat type SS key in duplicate for steel tables office cleark steel / office steel / office typist / table (900mm x 600mm x 760mm) complete all as specified and directed. Make:- Godrej/Bharat or equivalent from Note : Ref drawing No FD-84(M)/1003/1004/1005/1008/165/1002

Supply and fixing as in repair for PVC receased handles for steel tables drawer complete all as specified and directed. Note : Ref drawing No FD-84(M)1003/1004/1005/1008/165/1002

CHAIR CB STEEL WITH OR WITHOUT ARMS : Supply & Fixing for 25 mm dia, 16 gauge thick MS conduit pipe of required length/size to be fixed duly arc welded and level the surface to make smooth and painted with one coat of red oxide zinc chrome primer after with and including dismantling the rusted/damaged leg/seat/back rest frame carefully without disturbing the adjoining parts of CHAIR CB steel with arms and without arms. complete all as specified and directed. Note : Ref drawing No FD-75(M)

Material & Labour for preparation of surface for painting by scraping old /fainted paint with sand paper/ machine or emery paper as applicable to make surface smooth and filing uneven gaps with putty there by make equal level with adjacent surfaces and there after applying two coats of OG colour synthetic enamel paint of chair CB steel with arms and without arms complete all as specified and directed. Note : Ref drawing No FD-75(M)

Supply and fixing for seat frame made out of Ist class teak wood and canned with 2 mm wide and 0.4 mm thick gola type of approved colour and 4 mm wide thick cane for borders and the frames shall be polished or painted as required to match the existing and fixed with 4 No GI nut and bolts of size 3" long with washers for chair CB steel with arms and without arms complete all as specified and directed. Note : Ref drawing No FD-75 (M)

All as per item No 12 above but back frame complete all as specified and directed. Note : Ref drawing No FD-75 (M)

All as per item No 12 above but arm rest made out of Ist class teak wood duly french polished and fixed with MS screw complete all as specified and directed. Note : Ref drawing No FD-75 (M)

Supply and fixing for hard rubber bush with MS screw for Chair CB steel with arms and without arms after with and including dismantling of worn out damaged unserviceable one complete all as specified and directed. Note : Ref drawing No FD-75 (M)

Supply and fixing for hard rubber cap for rear leg top side to be fixed for open end of the conduit pipe of chair CB steel with arms and without arms after with and including dismantling of worn out damaged unserviceable one complete all as specified and directed. Note : Ref drawing No FD-75 (M)

ALMIRAH/ LOCKER BED SIDE STEEL : Supply and fixing as in repair 6 lever lock with duplicate flat key (2 Nos of key) with existing size fixed with screw/ welding to shutter of almirahs complete all as specified and directed. Make Godrej/Bharat or Equivalent approved Note : Ref drawing No FD-67/104 (M)/114 (M)/243/351/1031 /1032

Supply and fixing as in repair for 3-way assembly including 6mm thick round bars with necessary fittings of approved quality for almirah complete all as specified and directed. Note : Ref drawing No FD-67/104(M)/ 114(M)/ 243/ 351/ 1031

Supply and fixing as in repair for 3-way assembly including 6mm thick round bars with necessary fittings of approved quality for almirah complete all as specified and directed. Note : Ref drawing No FD-67/104(M)/114(M)/ 243/ 1032

Supply and fixing as in repair handle of godrej pattern with necessary fixing accessories of approved quality complete all as specified and directed. Note : Ref drawing No FD-67/ 104 (M)/114(M)/ 243/ 351/ 1031/ 1032

Supply and fixing as in repair for new bottom made out of 1mm thick MS sheet made to shape and size on drawing and fixing by welding matching with existing almirah and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. Note : Ref drawing No FD-67/104(M)/ 114(M)/ 351/ 1031

Supply and fixing as in repair for new bottom made out of 1mm thick MS sheet made to shape and size on drawing and fixing by welding matching with existing almirah and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. Note : Ref drawing No FD-67/104(M)/114(M)/243/1032

Supply and fixing as in repair of new legs made out of 1mm thick of MS sheet and fixed with welding/riveteting for the bottom portion as per existing size and duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. Note : Ref drawing No FD-67/104(M)/ 114(M)/ 351/1031

All as per item No 13.06 but for almirah medium steel complete all as specified and directed. Note: Ref drawing No FD: 67(M) /104(M)/114(M)/243/1032

Supply and fixing as in repair of new MS hinges or U clips of same shape & size as existing in steel almirah by fixing duly welded complete all as specified and directed. Note : Ref drawing No FD-67/104 (M)/114 (M)/243/351/ 1031 /1032

Supply and fixing as in repair for new shelves made out of 1mm thick MS sheet made to shape and size on drawing and fixing with cleats, nuts and bolts complete all as specified and directed. Note : Ref drawing No FD-67/104(M)/ 114(M)/ 351/1031

All as per item No 13.09 but for almirah medium steel complete all as specified and directed. Note: Ref drawing No FD: 67(M) /104(M)/114(M)/243/1032

All as per item No 13.09 but for locker bed side steel and complete all as specified and directed. Note : Ref drawing No FD-1029

Taking down of door shutter of almirahs and bringing the item to the original shape and refixing the repaired door shutters with suitable hinges complete all as specified and directed. Note : Ref drawing No FD-67/ 104(M)/114(M)/ 243/ 351/ 1031/1032

Taking down of existing dented shelves from almirahs steel bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. Note : Ref drawing No FD-67/ 104(M)/114(M)/ 243/ 351/ 1031/ 1032

RACK SHOE STEEL : Supply and fixing for 25 mm dia, 16 gauge thick MS conduit pipe of required length/size to be fixed after with and including dismantling the damaged leg frame carefully without disturbing the adjoining parts of RACK SHOE STEEL complete all as specified and directed. Note : Ref drawing No FD/E6/MAP/02

Supply and fixing for 6 mm dia MS rod of required length/size to be fixed after with and including dismantling the damaged shelf (frame) carefully without disturbing the adjoining parts of RACK SHOE STEEL complete all as specified and directed. Note : Ref drawing No FD/E6/MAP/02

Supply and fixing for 3 mm dia MS rod of required length/size to be fixed after with and including dismantling the damaged shelf (mesh) carefully without disturbing the adjoining parts of RACK SHOE STEEL complete all as specified and directed. Note : Ref drawing No FD/E6/MAP/02

Material and labour for preparation of old steel surfaces by scraping with emery paper, cleaning, reducing, making the surfaces smooth and applying putty wherever required and applying one coat of synthetic enamel paint of black shade of approved make & quality for RACK SHOE STEEL complete all as specified and directed. Note : Ref drawing No FD/E6/MAP/02

CHARPOY WITH HARDTOP : Supply and fixing for 25X65 mm, 16 Gauge thick MS Tube of required length/size to be fixed after with and including dismantling the damaged long rail/short rail carefully without disturbing the adjoining parts of CHARPOY WITH HARDTOP complete all as specified and directed. Note : Ref drawing No FD/MAP-II/01

All as per item no 15 but 32x32 mm, 16 gauge thick MS tube of required length/size to be fixed after with and including dismantling the damaged leg frame carefully without disturbing the adjoining parts of CHARPOY WITH HARDTOP complete all as specified and directed. Note : Ref drawing No FD/MAP-II/01

All as per item no 15 but 25X25 mm, 16 gauge thick MS tube of required length/size to be fixed after with and including dismantling the damaged stiffner carefully without disturbing the adjoining parts of CHARPOY WITH HARDTOP complete all as specified and directed. Note : Ref drawing No FD/MAP-II/01

Supply and fixing for 12mm thick BWR grade ply wood of size 6'6" x 3’ over the long rails & short rails fixed with nickel nut, bolt and washer. The edges of ply should be applied mixture of french chalk powder shellac & solvent and added colour for smooth finish irrespective of drawing complete all as specified and directed. Note : Anchor/alisan/Swastic/Eco brand. Note : Ref drawing No FD/MAP-II/01

Material and labour for preparation of old steel surfaces by scraping with emery paper, cleaning, reducing, making the surfaces smooth and applying putty wherever required and applying one coat of synthetic enamel paint of black shade of approved make & quality for CHARPOY WITH HARDTOP complete all as specified and directed. Note : Ref drawing No FD/MAP-II/01

Supply and fixing for hard rubber toe for CHARPOY WITH HARDTOP after with and including dismantling of worn out damaged unserviceable one complete all as specified and directed. Note : Ref drawing No FD/MAP-II/01

CHAIR COMPUTER/ REVOLVING : Supply & Fixing for twin castor wheel of size 50mm dia as per sample of chair computer / revolving low or high back after and including dismantling the old unserviceable one carefully without damaging the adjoining parts complete all as specified and directed. Note : Ref drawing No TP-Godrej/Aristo/Raj & Raj and FD/E6/MAP/01

All as per item No 16 above but stainless steel pedestal assembly complete all as specified and directed. Note : Ref drawing No TP-Godrej/Aristo/Raj & Raj and FD/E6/MAP/01

All as per item No 16 above but acrylic fabric for seat and back as per approved shade and S&F transparent plastic dust sheet covers for seat and back Note: Unit shall be each seat and each back Note: Rate of cloth should not be less than 420.00 per sq mtr Note : Ref drawing No TP-Godrej/Aristo/Raj & Raj and FD/E6/MAP/01

All as per item No 16 above but gas lift rod with proper adjusting tilt. Note : Ref drawing No TP-Godrej/Aristo/Raj & Raj and FD/E6/MAP/01

All as per item No 16 above but arm rest pair. Note : Ref drawing No TP-Godrej/Aristo/Raj & Raj and FD/E6/MAP/01

All as per item No 16 above but polyurethane foam of 50 mm thick of density 40 best quality for seat and back with lipping. Note : Ref drawing No TP-Godrej/Aristo/Raj & Raj and FD/E6/MAP/01

HOT-FOOD TROLLEY : Supply and fixing for Heavy duty ball-bearing rubber wheel of 150mm dia for HOT-FOOD TROLLEY SS as shown in drawing, fixing including dismantling of the existing unserviceable one complete all as specified and directed. Note : Ref drawing No CWE/CAL/FUR/01

All as per item No 17 above but collapseable front counter of size (390mm (L) x 500 mm (W)) for wheel base and complete all as specified and directed. Note : Ref drawing No CWE/CAL/FUR/01

All as per item No 17 above but brass hasp & staple as per sample for shutter and complete all as specified and directed. Note : Ref drawing No CWE/CAL/FUR/01

All as per item No 17 above but brass safety locking hinges of 180 mm long for lid with nut & bolt and complete all as specified and directed. Note : Ref drawing No CWE/CAL/FUR/01

All as per item No 17 above but 100 mm long stainless steel handle and complete all as specified and directed. Note : Ref drawing No CWE/CAL/FUR/01

All as per item No 17 above but SS container 215mm dia x 225mm deep made out of 19 gauge 304-grade stainless steel alongwith SS lid and complete all as specified and directed. Note : Ref drawing No CWE/CAL/FUR/01

All as per item No 17 above but painting bottom MS portion of the trolley with two coats of synthetic enamal paint over a coat of red oxide Zinc chrome primer of approved shade complete all as specified and directed. Note : Ref drawing No CWE/CAL/FUR/01

All as per item No 17 above but MS bracket for wheel and complete all as specified and directed. Note : Ref drawing No CWE/CAL/FUR/01

All as per item No 17 above but 15 amp socket of approved make and complete all as specified and directed. Note : Ref drawing No CWE/CAL/FUR/01

All as per item No 17 above but 15 amp 3 pin plug top of approved make and complete all as specified and directed. Note : Ref drawing No CWE/CAL/FUR/01

All as per item No 17 above but movable refrigerator type stainless steel rack as per sample and complete all as specified and directed. Note : Ref drawing No CWE/CAL/FUR/01

All as per item No 17 above but anodised SS receding doors for food chamber as per sample and complete all as specified and directed. Note : Ref drawing No CWE/CAL/FUR/01

All as per item No 17 above but 12 mm dia and 40 mm long stainless steel nut & bolt and complete all as specified and directed. Note : Ref drawing No CWE/CAL/FUR/01

All as per item No 17 above but 6 mm dia and 25 mm long stainless steel nut & bolt and complete all as specified and directed. Note : Ref drawing No CWE/CAL/FUR/01

All as per item No 17 above but buffing/polish the stainless steel surface of the item both inner and outer surface after prepration of surface with buffer machine for scratch-free glossy shine finish after repair and complete all as specified and directed. Note : Ref drawing No CWE/CAL/FUR/01

All as per item No 17 above but greasing the ball-bearing of wheel of serviceable wheel for smooth movement and complete all as specified and directed. Note : Ref drawing No CWE/CAL/FUR/01

CHAIR EASY (CUSHIONED) STEEL :- Material and labour for legs of 19 mm square MS pipe 16 gauge of length 510 mm of CHAIR EASY (CUSHIONED) STEEL including dismantling of the existing unserviceable one complete all as specified and directed. Note : Ref drawing No FD-121 (M).

All as per item No 18 above but seat base rail of 19 mm square MS pipe 16 gauge of length 700 mm and complete all as specified and directed. Note : Ref drawing No FD-121 (M).

All as per item No 18 above but teak wood hand rest of size 19 mm x 65 mm of length 700 mm duly french polished and fixed with screws and complete all as specified and directed. Note : Ref drawing No FD-121 (M).

All as per item No 18 above but 50 mm thick, 40 D foam of size 560 mm x 635 mm, duly covered with approved shade leatherite over the existing 12 mm thick teak wood plank as per drg of seat base and complete all as specified and directed. Note : Cost of leatherite cloth shall not be less than Rs 350.00 per mtr. Note : Ref drawing No FD-121 (M).

All as per item No 18 above but 25 mm thick, 40 D foam of size 560 mm x 355 mm, duly covered with approved shade leatherite over the existing 12 mm thick teak wood plank as per drg of back rest base and complete all as specified and directed. Note : Cost of leatherite cloth shall not be less than Rs 350.00 per mtr. Note : Ref drawing No FD-121 (M).

All as per item No 18 above but jointing of 20 mm X 3 mm MS flat iron cleats between hand rest and MS square pipes with steel screws and complete all as specified and directed. Note : Ref drawing No FD-121 (M).

All as per item No 18 above but dismantled metal clamp back side of seat rest to be refixed with steel srews and complete all as specified and directed. Note : Ref drawing No FD-121 (M).

All as per item No 18 above but hard rubber shoes as per sample and complete all as specified and directed. Note : Ref drawing No FD-121 (M).

STOOL STEEL (305x305x510MM) :- Material and labour for dismanting the damaged and warmout parts i.e Legs of 510 mm height made out of 16 gauge MS sheet made to shape and welded to stool frame of STOOL STEEL (305x305x510mm) as shown in drg complete all as specified and directed. Note : Ref drawing No FD-81

All as per item No 19 above but top made out of 20 gauge MS sheet made to shape and fitted to frames of STOOL STEEL (305x305x510mm) as shown in drg and complete all as specified and directed. Note : Ref drawing No FD-81

All as per item No 19 above but legs made out 20 gauge thick 22.5 mm dia MS tube made to shape and welded with frame of STEP STEEL 2 TIERS as shown in drg and complete all as specified and directed. Note : Ref drawing No FD-131

All as per item No 19.02 above but rubber castor with ball bearing 50 mm dia, duly fixed to front leg of STEP STEEL 2 TIERS and complete all as specified and directed. Note : Ref drawing No FD-131

All as per item No 19.02 above but 16 gauge MS sheet made to shape and fixed over the STEP STEEL 2 TIERS and complete all as specified and directed. Note : Ref drawing No FD-131

All as per item No 19 above but clit made out of 16 gauge MS sheet made to L-shape type and welded with the frame of STOOL REVOLVING (ADJUSTABLE) and complete all as specified and directed. Note : Ref drawing No FD-103, 1026

All as per item No 19.05 above but SS top 300mm dia made out of 1 mm thick as per size as shown in the drg of STOOL REVOLVING (ADJUSTABLE) and complete all as specified and directed. Note : Ref drawing No FD-103/1026

All as per item No19.05 above but rubber shoe of 25 mm dia as per approved sample of STOOL REVOLVING (ADJUSTABLE) and complete all as specified and directed. Note : Ref drawing No FD-103/1026

Material and labour for legs made out 25 mm dia MS tube of 16 gauge made to shape and welded to the frame of RACK TOWEL STEEL complete all as specified and directed. Note : Ref drawing No FD-81

All as per item No 19.08 above but rubber shoe of 25 mm dia as per approved sample of RACK TOWEL STEEL and complete all as specified and directed. Note : Ref drawing No FD-81

TABLE BEDSIDE STEEL (HOSPITAL) :- Material and labour for carefully dismantling the damaged / worn out parts i.e legs from the TABLE BEDSIDE STEEL (HOSPITAL) and replacing the same with new legs made out of 25 mm dia of 16 gauge MS tube made to shape and welded with frame including denting, welding as specified and shown on drg complete all as specified and directed. Note : Ref drawing No FD-133

All as per item No 20 above but long rail of 500 mm long made out of 20 mm dia 16 gauge MS tube of TABLE BEDSIDE STEEL (HOSPITAL) and complete all as specified and directed. Note : Ref drawing No FD-133

All as per item No 20 above but short rail of 300 mm long made out of 20 mm dia 16 gauge MS tube of TABLE BEDSIDE STEEL (HOSPITAL) and complete all as specified and as directed. Note : Ref drawing No FD-133

All as per item No 20 above but 100 mm long handle CP fixed with srews of TABLE BEDSIDE STEEL (HOSPITAL) and complete all as specified and directed. Note : Ref drawing No FD-133

All as per item No 20 above but top of size 550 x 330 mm made out of 18/19 mm thick prelaminated partical board OSL exterior grade-I of TABLE BEDSIDE STEEL (HOSPITAL) and complete all as specified and directed. Note : Make of particle board (Century/ Greenply) Note : Ref drawing No FD-133

LOCKER BED SIDE SS :- Material and labour for dismanting the damaged parts and replacting the same with new one i.e Leg (upto 150 mm long) made out of 25x25mm 16 gauge SS square tube, duly SS welded with the existing body of LOCKER BED SIDE SS as shown in the drg or complete all as specified and directed.: Ref drawing No CWE/FUR/16

All as per item No 21 above but SS handle of 100 mm long fixed with screws of LOCKER BED SIDE SS and complete all as specified and directed. Note : Ref drawing No CWE/FUR/16

All as per item No 21 above but heavy duty brass ball catcher as per sample shall be welded (SS) with shutter of LOCKER BED SIDE SS and complete all as specified and directed. Note : Ref drawing No CWE/FUR/16

All as per item No 21 above but refixing of shutter with screws of LOCKER BED SIDE SS and complete all as specified and directed. Note : Ref drawing No CWE/FUR/16

All as per item No 21 above but remove old sticky oily/dust with powder and polishing SS body with buffer machine /chemical dust until glaze finish with out any scratch to the body of LOCKER BED SIDE SS and complete all as specified and directed. Note : Ref drawing No CWE/FUR/16

SCREEN MOVEABLE STEEL :- Material and labour for dismanting the damaged/ frame warnout parts i.e legs made out of 25 mm dia of 16 gauge conduit pipe, welded to frame / leg of SCREEN MOVEABLE STEEL as shown in the drg and complete all as specified and directed. Note : Ref drawing No FD-83 (M)

All as per item No 22 above but for MS Hinges as per approved sample of SCREEN MOVEABLE STEEL and complete all as specified and directed. Note : Ref drawing No FD-83 (M)

All as per item No 22 above but for ball-bearing rubber castor of 50 mm dia of SCREEN MOVEABLE STEEL and complete all as specified and directed. Note : Ref drawing No FD-83 (M)

All as per item No 22 above but hook and PVC coated spring of 1150 mm long of SCREEN MOVEABLE STEEL and complete all as specified and directed. Note : Ref drawing No FD-83 (M)

All as per item No 22 above but hook and PVC coated spring of 550 mm long of SCREEN MOVEABLE STEEL and complete all as specified and directed. Note : Reference drawing No FD-83 (M)

All as per item No 22 above but cotton curtain size of 1160 x 1200 mm as per approved green colour sample of SCREEN MOVEABLE STEEL as shown in drg and complete all as specified and directed. Note : Ref drawing No FD-83 (M)

All as per item No 22 above but cotton curtain of size 550 x 1200 mm as per approved green colour sample of SCREEN MOVEABLE STEEL and complete all as specified and directed. Note : Ref drawing No FD-83 (M)

DINING TABLE FOR OR :- Material and labour for leg of DINING TABLE FOR OR made out of 25 mm square MS pipe 16 Guage of length 760 mm welded and including dismantling of the existing unserviceable one complete all as specified and directed. Note : Ref drawing No FD-165

All as per item No 23 above but front rail of 25 mm square MS pipe of 16 Guage thick of length 1600 mm and complete all as specified and directed. Note : Ref drawing No FD-165

All as per item No 23 above but short rail of 25 mm square MS pipe of 16 guage thick of length 515 mm and complete all as specified and directed. Note : Ref drawing No FD-165

All as per item No 23 above but foot rest of 25 mm square MS pipe of 16 Guage thick of length 1600 mm and complete all as specified and directed. Note : Ref drawing No FD-165

All as per item No 23 above but side stiffener of 25 mm square MS pipe of 16 Guage thick of length 515 mm and complete all as specified and directed. Note : Ref drawing No FD-165

All as per item No 23 above but Jointing the corner joints of leg/stiffnere with arc welding and complete all as specified and directed. Note : Ref drawing No FD-165

All as per item No 23 above but aluminium sheet of 22 guage of size 1975 mm x 760 mm having glossy shine over existing block board with nails and complete all as specified and directed. Note : Ref drawing No FD-165

All as per item No 23 above but providing 18/19 mm thick BWR grade ply as base of top of size 1900 mm x 685 mm and complete all as specified and directed. Note : Ref drawing No FD-165

All as per item No 23 above but 40 mm long screw nails for tightning the existing loosen top and complete all as specified and directed. Note : Ref drawing No FD-165

All as per item No 23 above but hard rubber shoes as per sample and complete all as specified and directed. Note : Ref drawing No FD-165

TABLE INVALID STEEL : Material and labour for legs made out of 25 mm dia MS tube of 1.6 mm thick x 150 mm long welded to leg frame of TABLE INVALID STEEL complete all as specified and directed. Note : Ref drawing No FD-131

All as per item No 24 above but rubber castor wheel of 50 mm dia shall be fitted to the legs of TABLE INVALID STEEL and complete all as specified and directed. Note : Ref drawing No FD-131

All as per item No 24 above but stiffener legs made out of 25 mm dia MS tube of 1.6 mm thick x 150 mm long welded (SS) to frame of TABLE INVALID STEEL and complete all as specified and directed. Note : Ref drawing No FD-131

All as per item No 24 above but SS top made out 1 mm thick made to shape of TABLE INVALID STEEL and complete all as specified and directed. Note : Ref drawing No FD-131

BED STAND IRON HOSPITAL (HOSCO) :- Supply and fixing for 125 mm dia castor wheel for bed stead iron including dismantling of the existing unserviceable one complete all as specified and directed. Note : Reference drawing No TP Hosco. Note : Ref drawing No HFD-2001

All as per item No 25 above but 18mm thick pre laminated particle board for head board of bed stand iron hospital (HOSCO) complete all as specified and directed. Note : Ref drawing No HFD-2001

All as per item No 25 above but foot board of bed stand iron hospital complete all as specified and as directed. Note : RefReference drawing No HFD-2001

LOCKER 3 / 4 / 6 UNIT :- Material and labour for legs of size 420 mm x 100 mm x 100 mm made with MS sheet of 1 mm thick, duly welded and painted with two coats of synthetic enamal paint over a coat of red oxide Zinc chrome primer to match with rest of the item for Locker 3 / 4 / 6 Unit including dismantling of the existing unserviceable one complete all as specified and directed. Note : Ref drawing No FD-127

All as per item No 26 above but 100 mm long brass chromium plated handle and complete all as specified and directed. Note : Ref drawing No FD-127

All as per item No 26 above but shutter made with MS sheet of 1 mm thick and complete all as specified and directed. Note : Ref drawing No FD-127

All as per item No 26 above but 4 lever lock with key as per sample complete all as specified and as directed. Note : Ref drawing No FD-127

All as per item No 26 above but chromium plated hariging rod of 25 mm dia 1.6 mm thick 100 mm long and complete all as specified and directed. Note : Ref drawing No FD-127

PAINTING : Material and labour for preparation of old steel surfaces by scraping with emery paper, cleaning, reducing, making the surfaces smooth and applying putty wherever required and applying one coat of synthetic enamel paint of approved shade of approved make & quality inside and out side of almirah large steel with shelves complete all as specified and as directed. Note : Ref drawing No FD-67/104(M)/ 114(M)/ 351/1031

All as per item No 27 above but almirah medium steel with shelves and complete all as specified and directed. Note : Ref drawing No FD-243/1032

All as per item No 27 above but almirah large glazed steel with shelves and complete all as specified and directed. Note : Ref drawing No FD-104(M)

All as per item No 27 above but almirah medium steel with shelves 1/2H, 1/2SH and complete all as specified and directed. Note : Ref drawing No FD-114

All as per item No 27 above but book shelf open large steel and complete all as specified and directed. Note : Ref drawing No FD-69(M)

All as per item No 27 above but book shelf open small steel and complete all as specified and directed. Note : Ref drawing No FD-69

All as per item No 27 above but book case steel 4 compartrments and complete all as specified and directed. Note : Ref drawing No FD-90

All as per item No 27 above but rack side 3/4 spaces steel and complete all as specified and directed. Note : Ref drawing No TP

All as per item No 27 above but rack side with tray (size 711x685x254mm) steel and complete all as specified and directed. Note : Ref drawing No FD-97(M)/FD-1023

All as per item No 27 above but locker steel and complete all as specified and directed. Note : Ref drawing No FD-1029

All as per item No 27 above but rack steel adj 6 tier and complete all as specified and directed. Note : Ref drawing No FD-1038

All as per item No 27 above but rack steel storage (size 1830x760x905mm) and complete all as specified and directed. Note : Ref drawing No FD-129(M)

All as per item No 27 above but ladder for loft and complete all as specified and directed. Note : Ref drawing No FD-238

All as per item No 27 above but table bed side steel and complete all as specified and directed. Note : Ref drawing No FD-76/133M/157

All as per item No 27 above but couch examination - massage (steel) / table cushioned complete all as specified and directed. Note : Ref drawing No FD-122/FD-135

All as per item No 27 above but rack towel tubular steel 380 mm (w) x 915 mm ( H) and complete all as specified and directed. Note : Ref drawing No FD-81

All as per item No 27 above but stool steel 305 mm (L) X 305 mm (W) X 510 mm ( H) and complete all as specified and directed. Note : Ref drawing No FD-81

All as per item No 27 above but stool steel 305 mm ( L) X 305 mm ( W) X 760 mm ( H) and complete all as specified and directed. Note : Ref drawing No FD-81

All as per item No 27 above but screen movable three-fold (1650 mm ( h) x 2400 mm (w) and complete all as specified and directed. Note : Ref drawing No FD-83

All as per item No 27 above but table invalid (tubular frame) of size 1070 mm x 460 mm x 415 mm and complete all as specified and directed. Note : Ref drawing No FD-131

All as per item No 27 above but step steel 2 tier (size 460 mmx 460 mm x 300 mm) and complete all as specified and directed. Note : Ref drawing No FD-131

All as per item No 27 above but step steel 3 tier (Size 460 mm x 460 mm x 450 mm) and complete all as specified and directed. Note : Ref drawing No FD-131

All as per item No 27 above but stool adjustable with stainless steel top 300 mm dia and complete all as specified and directed. Note : Ref drawing No FD-119/1026

All as per item No 27 above but locker steel 3 unit (size 1050 mm (H) X 920 mm ( L) X 485 mm (W)) and complete all as specified and directed. Note : Ref drawing No FD-127

All as per item No 27 above but locker steel 4 unit (size 1010 mm ( H) x 930 mm (L) X 430 mm (W)) and complete all as specified and directed. Note : Ref drawing No FD-127

All as per item No 27 above but locker steel 6 unit (size 1455 MM (H) x 930 Mm (L) x 430 mm (W)) and complete all as specified and directed. Note : RefReference drawing No FD-127

All as per item No 27 above but rack pigeon hole steel (size 1905 mm (H) x 915 mm (L) x 305/610 mm (W)) and complete all as specified and directed. Note : Ref drawing No FD-106.

All as per item No 27 above but buffing/machine polish to locker bedside SS outer surface and complete all as specified and directed. Note : Ref drawing No CWE/CAL/FUR/16

All as per item No 27 above but locker bedside steel (internal & external) and complete all as specified and directed. Note : Reference drawing No FD-1029/257.

All as per item No 27 above but bed stead iron hospital Make HOSCO and complete all as specified and directed. Note : Ref drawing No TP-Hosco

All as per item No 27 above but double decker charpoy with Ply top and complete all as specified and directed. Note : Ref drawing No GE/ALI/FD/01/09

All as per item No 27 above but bed hard steel and complete all as specified and directed. Note : Ref drawing No FD/E6/MAP/08

All as per item No 27 above but form without back (MS frames only) and complete all as specified and directed. Note : Ref drawing No FD-77

All as per item No 27 above but chair easy cushioned steel and complete all as specified and directed. Note : Ref drawing No FD-121

All as per item No 27 above but chair invalid wheeled (Non-folding) and complete all as specified and directed. Note : Ref drawing No HF-2061

All as per item No 27 above but MS Pipe frames of table dining OR and complete all as specified and directed. Note : Ref drawing No FD-165

REMCO

P N GUPTA AND SONS

SANKAR TRADERS

SOVA ENTERPRISE

Tirupati Buildcon Pvt. Ltd.

RADHA ENTERPRISE

BENGAL TRADERS

MAZUMDER & CO