REPAIRS TO JOINERY ,PLUMBING ,SANITARY FITTINGS AND CONNECTED ITEMS AT AIRFIELD AND TECH AREA AND CAMOUFLAGE PANTING AND REPAIR TO PLASTERING ON BOUNDRY WALL BLAST PEN FSP AND IN TECHNICAL AREA AT AFS JAISALMER

Amount

Taking down GI Pipe any grade 15mm dia etc complete

-do- but 20mm dia

S&Fsteel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid on floors, bore of tube 15mm all as spfd

All as per above item but bore of tube 20mm

Re-fixing old steel water tubing of 15mm bore and connection in new or old position fixed to the walls, ceiling or laid in floor complete all as specified and directed.

All as per above item but 20mm bore and -ditto-

S&F O.H water tanks Cover of 500 litrs /1000 ltrs Capacity including locking arrangements and removing old broken cover

Repairs to stop cock or concealed type stop cock or long shank and cup (concealed type) CP stop cock 15mm dia with and including opening of stop cock and closed in positions after repair by replacing the following items. (a) By replacing only washer

(b) -Ditto- all item as per Ser No 8.00 above but By replacing brass spindle

Repairs to CP bib taps or pillar tap of angle valves of any description 15mm dia with and replacing following items complete all as specified and directed. (a) By replacing only washer

(b) -Ditto- all item as per Ser No 9.00 above but By replacing brass spindle

S&F in repairs 15 mm size fancy type chromium plated bib taps with crutch or butter fly handle, screwed down, screwed for iron pipe etc complete.

S&F in repairs 15mm bore fancy type chromium plated pillar taps with capstan heads, screwed down high pressure with long screwed sharks and fly nuts screwed down for iron pipes etc complete all as directed.

S&F repair 15mm size fancy type chromium plated stop cocks screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes etc complete all as directed..

S&F repair 15mm size fancy type, chromium plated with long shank and cup (concealed type) stop cocks screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes etc complete all as directed..

Repair to PVC flush tank with and including opening of flush tanks and closed in position after repair by repalcing following items (a) By flush washer only

(b) -Ditto- all item as per Ser No 14.00 above but By chaning float valve

(c) -Ditto- all item as per Ser No 14.00 above by changing of internal set complete

(d) -Ditto all item as per Ser No 14.00 above but S & Fixed in repair 10 ltr cap. PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs brass bib cock of 15mm .

S&F in repairs PTMT bib cock of 15mm dia

S&F in repairs 20mm dia PTMT Ball valves high pressure with polythen float and fly not complete, screwed for iron pipe complete all as specified.

S&F in repairs grating round 125mm size of PTMT repairs.

S&F in repairs swivel shower of PTMT any colour with shower 195mm long and 15mm dia etc complete all as specified and directed

S&F in repairs PVC connection 15mm with PTMT nuts of length 450mm complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia D type 60cm long between flanges fixed in repairs.

S&F in repair low density polyethylene pipes (LDPE) of pressure rating 6 Kg/CM2 32mm dia fixed complete to walls, ceiling or in floors etc complete.

Supplying and laying 16mm outer diameter of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying 20mm outer diameter of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supply and fixing in repair 16mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms/ 20mm- 92gms) ®

Supply and fixing in repair 20mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms/ 20mm-92gms) ®

S& Fixed in repair waste coupling 32 mm dia of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms)

S&Fixed in repair waste coupling 40mm dia of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms)

S&F in repair low density polyethylene pipes (LDPE) of pressure rating 6 Lg/CM2 40mm dia fixed complete to walls, ceiling or in floors etc complete.

S&F flexible PVC waste pipe of 32mm dia fixing complete

S & Fixed in repair 20mm dia GI tank adaptor

S&F in repair brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessar

Taking down wash hand basin or sink of any size including refixing with MS angle/GI pipe with paint new brackets in the same places

S&Fixied in repair wash hand basin vitreous china wash basin white flat back size 580x450 including supplied and fixed angle iron brakets errecting stand compleete all as specified.

S&F sink with drainage board made of stainless steel 1 mm thick with plug and washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackt and connacting union to pipe over all size 495 x 420 mm and bowl size 410x330x160 mm compleete all as specified

M&L for repair vitreous china sqatting pan "orissa" pattern of size 580x440mm white with integral foot rests, P or S trap etc complete

S&F in repairs white coloured vitreous china urinal half stall type with 40mm size brass chromium plated waste coupling with long screwed shanks and fly nuts flange end bedded in red lead.

S&F in repairs white coloured vitreous china wash down water closet pan (Pedestal pattern) with and including plastic water closet seat closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device.

S&F in repair plastic seat cover for EWC with hinging device complete.

Opening of air lock / blockage in GI pipe line/ PVC pipe line at point from outlet of water tank up 10mtr height to internal fitting for smooth flow of water tap/stop valves complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and mouth and circulating pipes etc, exc 250 ltr & n.exc 500ltrs capacity and marking date of cleaning with paint.

Cleaning and removing all scale and dirt etc from tanks and mouth and circulating pipes etc, exc 500 ltr & n.exc 1000ltrs capacity and marking date of cleaning with paint.

S&F in repair small fitting of galvanized iron medium grade such as socket, elbow, nipple or different sizes Tee, union, reducer etc for 15mm bore pipe all as specified and directed by Engr-in-charge.

S&F in repair small fitting of galvanized iron medium grade such as socket, elbow, nipple or different sizes Tee, union, reducer etc for 20mm bore pipe all as specified and directed by Engr-in-charge.

S&F in repair small fitting of galvanized iron medium grade such as socket, elbow, nipple or different sizes Tee, union, reducer etc for 25mm bore pipe all as specified and directed by Engr-in-charge.

S&F in repair small fitting of galvanized iron medium grade such as socket, elbow, nipple or different sizes Tee, union, reducer etc for 32mm bore pipe all as specified and directed by Engr-in-charge.

Dismantling water tanks, capacity exc 500 & n.exc 1000 ltrs.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage triple layer white tanks (cylindrical verticle with closed top) hoisted and fixed in position all as specified in SSR Part-I

Dismantling water tanks, capacity exc 250 & n.exc 500 ltrs.

S&F 500 ltrs capacity rotational moulded polyethylene water storage triple layer white tanks (cylindrical verticle with closed top) hoisted and fixed in position all as specified in SSR Part-I

S&F 20 mm dia ball valve ,high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minium wt-210 gms)

S&F in repairs shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) etc complete all as specified.

S&F in repairs liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) etc complete all as specified..

Demolition and beaking up drain pipes upto 100mm internal dia of pipe (SGSW,AC or RCC) set in cement mortor etc complete all as specified.

S&F 75mm bore PVC (SWR) pipes single socketed in any lenghts with rubber vring joints, laid in trenches or in floors etc complete all as specified.

Ditto all as in Sl Item No 132 above but fixed to walls

S&F 110mm bore PVC (SWR) pipes single socketed in any lenghts with rubber vring joints, laid in trenches or in floors etc complete all as specified.

Ditto all as in Sl Item No 134 above but fixed to walls

S&F 75mm bore PVC (SWR) bends any radius etc complete all as specified.

S&F 75mm bore PVC (SWR) bends any radius provided with access door etc complete all as specified.

S&F110mm bore PVC (SWR) bends any radius etc complete all as specified.

S&F110mm bore PVC (SWR) junction single(Single T) equal or unequal provided with access door etc complete all as specified.

S&F110mm bore PVC (SWR) vent cowl etc complete all as specified.

S&F 75mm diameter of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement & jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as specified.

S&F hydrolic type capsule door closer (iron body), perfect hydrolic type, space for door shutters

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing, serviceable tiles to stone and rubbish off the premises all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surfaces 300x200x6-7mm/450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 on other then fair faces of brick work etc complete.

M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectingular)area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 etc complete.

M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectingular)area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 etc complete.

M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectingular)area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 etc complete.

S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150mm

S&F aluminum handle cast type anodized 150 mm size complete all as specified and directed.

S & F mild steel 250 mm long sliding door bolt plate type, stove encmelled black, with brigth bolt not less 12mm dia with and including a minimum of 6 bolts and nuts etc complete.

Hacking out old broken glass any thickness size, quality or description from wooden frame glazed with puty or fixed with beads.

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty or aluminium beads in square not exc 0.50 sqm in each pane, complete all as specified and directed.

S&F 4mm thick figured glass pin head type and glazing with oil putty or aluminium beads and rubber in squares n. exc 0.50 Sqmtr each pane complete all as specified and directed by Engr-in-charge.

S&F 4.8mm thick figured glass pin head type and glazing with oil putty or aluminium beads and rubber in squares n exc 0.50 Sqmtr each pane complete all as specified and directed by Engr-in-charge.

Welding in repairs n. exc 2.5cm in length thickness of metal n.exc 6 mm complete all as specified.

M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregated as in cill, step and for inserting hold fast of doors and windows all as specified and directed.

Easing and adjusting of steel window/ventilators incl removing rusted and forging materials and replacing broken hinges including welding and all labour complete all as spfd

Easing and adjusting of aluminium window including necessary joining cleats, glazing clips, rubber packing and anodised aluminium snap beading, screws, anodised aluminium fittings fixing aluminium bedding, rubber beding removing rusted and forging materials and replacing broken hinges including fixing necessary aluminium flat and aluminium angle complete all as spfd

Easing and adjusting of aluminium door including necessary joining cleats, glazing clips, rubber packing and anodised aluminium snap beading, screws, anodised aluminium fittings fixing aluminium bedding, rubber beding removing rusted and forging materials and replacing broken hinges including fixing necessary aluminium flat and aluminium angle complete all as spfd

Easing of door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed by Engr-in-charge.

S&F in repairs 150mm long M.S tower bolt stove enamelled black with bright bolt etc complete all as specified and directed.

.-Ditto- as item above but aluminium anodized 150mm long

S&F in repairs M.S Sliding door bolt- 250mm long

S&F in repairs Aluminium Sliding door bolt- 250mm long

S&F in repairs M.S handle 150 mm long complete all as specified and directed.

.-Ditto- item above but Aluminium handle 125mm size

S&F aluminium (extruded section body) door closure hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000mm in width

S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty etc complete all as directed.

S&F floor door stopper ( overall length of cover plate140 mm) of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in repairs in floors. complete all as specified and as directed.

S&F in repair stainless steel curtain rod 25mm dia including side bracket fixed and including stainless steel matching pair of brackets fixed with screw

S & F in repair mortice lock for aluminium door ISI mark with fixing and key set complete

Taking down cement plaster of any description built in cement mortor complete all as specified

M&L for rendering 10mm thick on stone / concrete block masonry surfaces of any description in cement mortar (1:6) is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for preparation of newly plastered of wall surfaces and applying two coat of oil emulsion distemper over a coat of cement primer in different tints in sigma / camouflaging pattern as approved complete all as specified.

Taking down chowkhat with shutter (without taking off shutter from the frame) n. exc 1.5 sqm all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames exc 1.5 sq. m but n exc 4 sq. m each

S&F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes 19mmx19mmx19gauge for stiles & 15mmx15mmx19 gauge for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading & joined together with solvent cement etc complete all as specified.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

M&LPre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified ®

M&L for preparation of old treated/decorated external wall surfaces of any storeys / height upto 10m and applying one coat of cement based paint in different tints in sigma/camouflage pattern as approved complete all as specified and directed.

M&L preparation of old painted steel surfaces over 10 cm in width or girth as in steel gate, fencing post, gates hangars, steel door etc and applying one coat of synthetic enamel paint with appropriated arrangements of shuttering to reach upto height of hangars complete all as specified and directed.

M&L for preparation of old treated/ decorated external wall/roof surfaces of any storeys / height upto 10m of any description and applying one coat of exterior emulsion paint (weather coat) 1st quality in different tints/shades in sigma/ camouflaging pattern as approved complete all as specified & as directed.

M&L for preparation of old decorated surfaces of walls of any description and applying one coat of white wash etc. complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated surfaces of ceilings of any description and applying one coat of white wash etc. complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated wall surfaces of any description and applying one coat of oil emulsion distemper of different tints in sigma/camouflage pattern as approved complete all as specified and directed.

M&L for preparation of old decorated ceiling surfaces of any description and applying one coat of oil emulsion distemper of any tint etc complete complete all as specified and directed by Engr-in-charge.

M&L for preparation of old painted wooden surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint of any tint etc complete all as specified and directed by Engr-in-charge.

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc.

M&L for 10mm thick rendering in CM 1:4 on stone masonry or other than fair faces of concrete / brick is to be finished even and smooth (without using extra lime or cement) complete all as specified.

M&L for rendering 10mm thick on concrete surfaces of any description in cement mortar (1:6) is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L 5mm thick rendering on concrete surfaces of ceiling,soffits of chajjas/drop & roof projection facia etc.in CM 1:3 finiched even and smooth with out using extra cement complete all as specified.

M&L for applying 3mm thick wall care putty on wall surface complete all as specified

M&L for applying 3mm thick wall care putty on ceiling surface complete all as specified

M&L for preparation of newly plastered of wall surfaces and applying two coats of cement based paint over a coat of cement primer in different tints in sigma / camouflaging pattern as approved complete all as specified.

M&L for preparation of new treated/ decorated external wall/roof surfaces of any storeys / height upto 10m of any description and applying two coat of exterior emulsion paint (weather coat) over one coat primer 1st quality in different tints/shades in sigma/ camouflaging pattern as approved complete all as specified & as directed.

M&L for prepration of new surface plastered or unplastered applying three coats of White washing on ceiling,soffits of chajjas/drop & roof projection facia etc complete as specified.

M&L for preparation of newly plastered of wall surfaces and applying two coat of oil emulsion distemper over a coat of cement primer in different tints in sigma / camouflaging pattern as approved complete all as specified.

M/s RKG CONSTRUCTIONS (BID ID -3487138)

M/s Sati Jasnath Enterprises (BID ID -3489375)