Rerouting of Drinking water pipeline to underground near SSPCC building at ACTREC

TECHNICAL DATA SHEET

S. NO PARTICULARS DATA TO BE FILLED UP REMARKS

PART I : DETAIL OF THE AGENCY

I Name of the Agency Full name as per Regd. Cer.t

II Type of Firm Proprietoryship/ partnership/Limited Company/ any other

III Registration details with PWD/CPWD etc. Pl. furnish date of Registration and its validity

IV Yaer of establishment

V Postal address Pl indicate full postal Address with PIN

VI Contact with STD code

VII Fax with STD code

VIII Name of Contact person

PART II : DOCUMENTS TO BE SCANNED AND UPLOADED.

1 Financial Turn Over Certified by CA

PL. FILL UP AMOUNT & UPLOAD SCANNED COPIES

Average of last 3 years

2 Profit & Loss Statement Certified by CA

PL.FILL UP AMOUNT & UPLOAD SCANNED COPIES

3 Latest Bank Solvency Certificate. PL. FILL UP AMOUNT, DATE & UPLOAD SCANNED COPY

4 List of Similar Works carried out in last 7 years i) Agency for whom exceuted ii) Value of Work iii)Stipulated and Actual time of Completion. PL. FILL UP DETAILS IN SEPARATE SHEET & UPLOAD SCANNED COPIES

3 similar works works a) PL. FILL UP THE AMOUNT & UPLOAD SCANNED COPY

2 similar works works a) PL. FILL UP THE AMOUNT & UPLOAD SCANNED COPY

1 similar works works PL.FILL UP AMOUNT AND UPLOAD SCAN NED COPY

5 Bidding Capacity PL.FILL UP AMOUNT AND UPLOAD SCAN COPY

6 List of all works in Hand indicating: i)Agency ii) Value of Work iii) Stipulated time of completion/ present position etc. PL. UPLOAD SCANNED COPIES

Typr of works executed since last seven years PL. UPLOAD SCANNED COPY

7 List of Construction Plants and Machinery. PL. UPLOAD SCANNED COPY

Maximum amount of single works executed since lats 7 years PL. UPLOAD SCANNED COPY

8 List of Technical Staff. PL. UPLOAD SCANNED COPY

i) Registration Certificate if any PL. FILL UP REGD. NUMBER & UPLOAD SCANNED COPY

ii) Certificates of Work Experience /Performance certificates PL. FILL UP REGD. NUMBER & UPLOAD SCANNED COPY

iii) PAN (Permanent Account Number) PL.FILL UP PAN & UPLOAD SCANNED COPY

PL. FILL UP REGD. NUMBER & UPLOAD SCANNED COPIES

PL. FILL UP REGD. NUMBER & UPLOAD SCANNED COPIES

PL. UPLOAD SCANNED COPY

10 Undertaking that the eligible similar work(s) have not been executed through another contractor on back to back basis: PL. UPLOAD SCANNED COPY

11 UNDERTAKING PL. UPLOAD SCANNED COPY (MANDATORY)

UNDERTAKING: I / We have read and examined the E-Tender Notice for Inviting Pre Qualification (PQ) of Contracting Agencies, Section I, II & III, & other documents and rules referred to and all other contents in the tender documents for the work AND ACCORDINGLY I / We, hereby submit credentials and other documents as are provided for, by, and in respects in accordance with, such conditions so far as applicable.

12 I/We have downloaded and gone through the pre-bid clarifications issued by the Department after close of sale of tenders and submitting tender accordingly. PL. UPLOAD SCANNED COPY (MANDATORY)

崀低䕔›䡔⁅䝁久奃䴠单⁔䥆䱌唠⁐䱁⁌䡔⁅䡓䕅協嘠婉

Form "A" & "B" Financial Information & Bank Solvency

S. NO PARTICULARS REMARKS

I Name of the Agency

SCAN COPY ATTACHED "YES" OR "NO"

1 Financial Turn Over Certified by CA Gross turnover Amount in lakh Profit/ Loss Amount in lakh Certified by Chartered Accountant

2 Latest Bank Solvency Certificate.

3 Financial Arrangements for carrying out the proposed work

崀低䕔›䡔⁅䝁久奃䴠单⁔䥆䱌唠⁐䱁⁌䡔⁅䡓䕅協嘠婉

FORM C : Details of all similar works completed in all respect during the last seven years ending previous day of last date of submission of tenders.(Starting with latest work)

S. NO Name of the work/ Project and location Owner or sponsoring organisation Cost of work Rupees (in lakhs) Date of commencement as per contract Stipulated date of Completion Actual date of completion Litigation/ arbritation pending/ in progress (with details) Name & addresses/ Phone Nos of the officers to whom reference can be made. REMARKS

Name of the Agency

* Indicate gross amount claimed and amount awarded by the Arbitrator if any.

i) The agency may submit separate form for giving details of work (completed) for each year to fill up the details as above.

Separate sheets if any shall be numbered in sequence.

ii) The scanned copies of the work orders for each work be uploaded . BOQ shall be furnished at a later date on request.

iii) Certified that the above list of works is complete and no work has been left-out and the information given is correct to my

knowledge and belief.

iv) The hard copy all similar works completed during last seven years ending previous day of last date of submission of tenders.

shall also be submitted on or before due date.

崀低䕔›䡔⁅䝁久奃䴠单⁔䥆䱌唠⁐䱁⁌䡔⁅䡓䕅協嘠婉

FORM D : Details of all works of any nature under execution or awarded (No work shall be left out).

S. NO Name of the work/ Project and location Owner or sponsering organisation Cost of work Rupees (in lakhs) Date of commencement as per contract Stipulated date of Completion Upto date percentage progress of the work Slow progress, if any and reasons thereof. Name & addresses/ Phone Nos of the officers to whom reference can be made. REMARKS

Name of the Agency

i. The agency may submit separate form for giving details of each project (in progress/awarded) and fill up the details

as above. Separate sheets if any shall be numbered in sequence.

ii. The scanned copies of the work orders for each work be uploaded. BOQ shall be furnished at a later date on request.

iii. Certified that the above list of works is complete and no work has been left-out and the information given is correct

to my knowledge and belief

iv. The hard copy all works of any nature in hand and awarded shall also be submitted on or before due date. No works

shall be left out

崀低䕔›䡔⁅䝁久奃䴠单⁔䥆䱌唠⁐䱁⁌䡔⁅䡓䕅協嘠婉

FORM E : Performance Reports of Works (Separate certificates for each work)

Name of the Agency

S. NO Name of the Work/ Project & Location Agreement No. Estimated Cost Tendered Cost Date of start Date of completion Amount of compensation levied for delayed completion, if any. Amount of reduced rated item, if any. Performance report REMARKS

(i) Stipulated date of Completion (ii) Actual Date of Completion (iii) Present position of the work, if in progress. (1) Quality of work (2) Financial soundness (3) Technical profiency (4) Resourcefulness (5) General behaviour (6) Time consciouness

崀低䕔›䡔⁅䝁久奃䴠单⁔䥆䱌唠⁐䱁⁌䡔⁅䡓䕅協嘠婉

FORM F: STRUCTURE AND ORGANISATION

1 Name & Postal Address of the applicant:

2 Telephone No./Telex No./Fax No.

3 Legal status of the applicant (Please tick and attach attested copies of original document defining the legal status)

(a) An individual; (b) A proprietary firm; (c) A firm in partnership (d) A limited company or Corporation

4 Particulars of registration with various Government bodies (scanned & uploaded photocopy) Sl.No. Dept/Organisation &Place of registration Registration No.

5 Names and Titles of Director & Officers with designation proposed to be concerned with this work

6 Designation of individuals authorised to act for the organisation

7 Was the agency ever required to suspend construction for a period of more than six months continuously after you commenced the construction? If so, give the name of the project and reasons of suspension of work.

8 Has the agency or any constituent partner in case of partnership firm, ever abandoned the awarded work before its completion? If so, give name of the project and reasons for abandonment.

9 Has the agency, or any constituent partner in case of partnership firm, ever been debarred / black listed for tendering in any organisation at any time? If so give details.

10 Has the agency, or any constituent partner in case of partnership firm , ever been convicted by a court of law? If so, give details.

11 In which fields of Engineering construction the applicant has specialisation and interest?

12 Any other information considered necessary but not included above.

崀低䕔›䡔⁅䝁久奃䴠单⁔䥆䱌唠⁐䱁⁌䡔⁅䡓䕅協嘠婉

Form "G"- DETAILS OF TECHNICAL & ADMINISTRATIVE PERSONNEL TO BE EMPLOYED FOR THIS WORK

Name of the Agency

Sr. No Name Designation Qualifications Professional experience and details of work carried out How these would be involved in this work Remarks

崀低䕔›䡔⁅䝁久奃䴠单⁔䥆䱌唠⁐䱁⁌䡔⁅䡓䕅協嘠婉

Form H- DETAILS OF CONSTRUCTION PLANT AND EQUIPMENT LIKELY TO BE USED IN CARRYING OUT THIS WORK

Name of the Agency

Sr. No Name of Equipment/ Plant Nos Capacity or Type & make Age Condition Ownership status Current Location Remarks

Presently owned Leased To be purchased Proposed to be hired

崀低䕔›䡔⁅䝁久奃䴠单⁔䥆䱌唠⁐䱁⁌䡔⁅䡓䕅協嘠婉

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Director TMC

Name of Work: Rerouting of Drinking water pipleline to underground near SSPCC building at ACTREC

Contract No: TMC/ACTREC/ENGG/PG/ET-95/Rerouting of Water pipeline/2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder in Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Civil Works item1

2 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. item2 RMT Excess(+) Full Conversion INR

3 Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the Engineer-in-charge; for the following grades of concrete. Concrete of M-15 grade with minimum cement content of 240 kg/cum. item3 Cum Excess(+) Full Conversion INR

4 Providing and laying in position ready mixed cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall not be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement .Concrete of M30 grade with minimum cement content of 350 kg /cum item4 Cum Excess(+) Full Conversion INR

5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work 100mm nominal inner dia. Pipes. item5 RMT Excess(+) Full Conversion INR

6 Remove and Refixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work 100 mm nominal inner dia. Pipes. ( including all necessary fitings like coupling, tee, eblow,reducer etc) item6 RMT Excess(+) Full Conversion INR

7 SITC of SS 304 External Polished & Buffed Pipe Conforming to (ASTM A312) , Heavy Class, Upto 150 NB Schedule 10. above 200NB Schedule 40 including fitting, elbows, tees, reducers, painting, support, nuts, bolts, washers, gaskets etc as required with Argon Gas Welding and Welding Electrodes as per tender requirements, All Pipes shall be despatched with End caps, Test Certificates without any damage. Cost shall include DP test for every welded joint , Hydro test and with all material required for these tests. 150mm dia. item7 RMT Excess(+) Full Conversion INR

8 SITC of Cast Steel (may include SS 304 component) thin NRV as per API 600, Class 150 , PN 20 rating OS & Y Type Raising Stem type NRV , Maximum Working Pressure 300 psi, Hydrostatic pressure 600psi for Potable Water Service, Refer Datasheet for detailed specifications 150mm dia. item8 Nos Excess(+) Full Conversion INR

9 SITC of Cast Steel (may include SS 304 component) Gate Valves with flanged ends with matching companion flages as per API 600, Class 150 , PN 20 rating OS & Y Type Raising Stem type Gate Valve , Maximum Working Pressure 300 psi, Hydrostatic pressure 600psi for Potable Water Service, Refer Datasheet for detailed specifications 150mm dia. item9 Nos Excess(+) Full Conversion INR

10 Provide and fixing SS flange for Cpvc to SS pipe connection including gaskets and ss Nuts bolts etc as direction of EIC item10 Nos Excess(+) Full Conversion INR

11 Provide and fixing CPVC flange for Cpvc to SS pipe connection including gaskets and ss Nuts bolts etc as direction of EIC item11 Nos Excess(+) Full Conversion INR

12 Provide and fixing SS Reducer for SS pipe 150mm dia to CPVC 100mm dia connection including gaskets and ss Nuts bolts etc as direction of EIC item12 Nos Excess(+) Full Conversion INR

13 CHEQUERED TILES: Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Dark shade pigment using ordinary cement item13 Sqm Excess(+) Full Conversion INR

14 Constructing masonry Chamber 150x150x150 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.l. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 item14 1 No. Excess(+) Full Conversion INR

15 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). item15 cum Excess(+) Full Conversion INR

16 REINFORCEMENT: Reinforcement for reinforced cement concrete at all floors and levels including supplying cutting bending fixing and binding in position with 1.6mm dia soft drawn annealed binding wire including cost of binding wire labour etc. complete all as per specifications and as directed by the Engineer-in-Charge. (laps will not be measured). With high yield strength deformed bars (TMT bars) & MS round bars item16 Kg Excess(+) Full Conversion INR

17 providing and fixing GI to DI Connector 150 mm item17 Nos Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Quoted Rate in Words

Please Enable Macros to View BoQ information