Certain repair / replacement of rewiring and fittings/ fixtures OTM Accn at 550 Acre located units under GE (East) Ferozepur Cantt

Taking down carefully existig copper/ alumn point wiring for light/ fan/ bell/ socket 5/15 Amp points complete with fitting and fixtures such as Switches, Sockets, Ceiling Rose, Lamp Holder and bracket fittings with Battens/ Conduits/ Wires and making good the disturbed surfaces of walls and roofs etc to match with existing surface, complete all as specified and directed.

Taking down carefully unserviceable main switches and distribution boards (single phase or three phase) of any capacity with Isolators/ MCBs/ MCCBs, complete all as specified and directed.

Taking down carefully old unserviceable sub main wiring and making good disturbed surfaces and matching with existing, complete all as specified and directed.

M&L Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets and various sizes hylam sheets for mounting switch/ sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed, stranded (Green colour) connected to common earth dolly complete all as specified and directed for following :- (a) One light/ fan/ bell/ Bldg security light point controlled by one single pole one way switch.

All as per item No. 04 as above but one 3 pin, 5 Amp, socket outlet on the independent board controlled by one single pole one way switch board complete all as specified and directed.

All as per item No. 04 as above but one 3 pin, 5 Amp, socket outlet on the same board controlled by one single pole one way switch board complete all as specified and directed.

All as per item No. 04 as above here-in-before but wiring with 2.5 sqmm copper cable and 2.5 Sqmm copper cable as continuous earth wire for one 6 pin 6/16 Amps socket out let on independent board complete all as specified and directed.

All as per item No. 07 as above here-in-before but wiring with 4 sqmm copper cable and 4 Sqmm copper cable as continuous earth wire for one 6 pin 6/16 Amps socket out let on independent board complete all as specified and directed.

All as per item No 04 above but existing conduit and existing Ms pressed steel/ cast iron box complete all as speicifed and directed.(a) One light point/fan/bell point controlled by one single pole one way switch.

All as per item No - 05 above but existing conduit and existing Ms pressed steel/ cast iron box complete all as specifed and directed.