Renovation of Multiple Rest Rooms located at various locations in Aircraft Division, HAL BC.

HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION

NAME OF THE WORK: Renovation of Multiple Rest Rooms located at various locations in Aircraft Division, HAL [BC]. CONTRACT NO. HAL/FMD/R-104/24-25

Name of the Contractor :

Sl. No. Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with relevant CPWD specifications amended upto date/ detailed technical specification in tender document and tender drawings if any.

1 Disposal of surplus earth / moorum / building rubbish / malba / similar unserviceable, dismantled or waste material of partitions, ceiling boards, tiles, frames, etc., by mechanical transport including loading, transporting, unloading in all lifts / loads upt 10 km distance from HAL, etc., all complete as directed by Engineer-in-Charge. 30.00 Cum 453.95 Rupees Four Hundred Fifty Three and Ninety Five Paise Only 13618.50

2 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains, pipes, cables etc. in all kinds of soils (not exceeding 1.50m in width or 10 Sq m on plan), including dressing of sides and ramming of bottoms, for all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m with all labour, tools & tackles, plant & machinery, hire & fuel charges etc., all complete as directed by Engineer-in-Charge. 6.00 Cu m 239.16 Rupees Two Hundred Thirty Nine and Sixteen Paise Only 1434.96

3 Returning / filling in with useful excavated soil (excluding rock), free from salts, organic or other deleterious matter (Other than black cotton soil & rock etc., in trenches, plinth, sides of foundations, etc., spreading in layers not exceeding 20cm thick, watering, breaking / removing clods exceeding 50mm, ramming and consolidation of each deposited layer etc., with all labour, tools & tackles, plant & machinery, etc., lead upto 50m and for all lifts, etc., all complete as directed by the Engineer-in-Charge. 6.00 Cu m 180.08 Rupees One Hundred Eighty and Eight Paise Only 1080.48

4 Supplying, mixing and placing plain cement concrete (1:4:8) (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate) of required thickness using 40mm down graded hard stone / granite aggregate in accordance with IS 456 in foundations, mass concrete, sub bases and other similar works including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc., but excluding the cost of centering, shuttering and finishing, etc., all complete as directed by the Engineer-in-Charge. 5.00 Cu m 6258.39 Rupees Six Thousand Two Hundred Fifty Eight and Thirty Nine Paise Only 31291.95

5 Supplying, mixing and placing plain cement concrete (1:2:4) (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate) of required thickness using 20mm nominal size down graded hard stone / granite aggregate in accordance with IS 456 in posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions, etc., but excluding the cost of centering, shuttering and finishing, etc., all complete as directed by the Engineer-in-Charge. 20.00 Cu m 9091.01 Rupees Nine Thousand Ninety One and One Paise Only 181820.20

6 Brick work with 230mm / 115mm thick common burnt clay machine moulded modular bricks of class designation 7.5 in brick work above plinth level including making horizontal and vertical grooves 10mm wide 12mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand), etc., all complete as directed by the Engineer-in-Charge. 25.00 Cum 7637.31 Rupees Seven Thousand Six Hundred Thirty Seven and Thirty One Paise Only 190932.75

7 Providing and fixing Granite stone slab of with (18mm to 25mm thick), area of slab not less than 0.50Sq m, like Ruby Red / Black / Cherry with gang saw cut, mirror polished, premoulded and prepolished, machine cut for urinal partitions, platforms, vanity counters, and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish, etc., all complete at all levels as per direction of Engineer-in-Charge. 18.00 Sqm 4973.54 Rupees Four Thousand Nine Hundred Seventy Three and Fifty Four Paise Only 89523.72

8 Providing and fixing Ceramic glazed wall tiles (Light / dark shade) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black , in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30kg per Sq m, including pointing in white cement mixed with pigment of matching shade of any size as approved by EIC, etc., all complete as directed by Engineer-in-Charge. 360.00 Sqm 1164.91 Rupees One Thousand One Hundred Sixty Four and Ninety One Paise Only 419367.60

9 Providing and fixing Hard wood (SAL) for frames of doors, windows, hand rails, frame work for partitions cut to shape and required curvature and preparing the surfaces to receive the polishing fixed in position with hold fast lugs / with dash fasteners of required dia & length/SS Screws at all heights, with necessary moisture content test, etc., all complete as directed by Engineer-in-Charge. (Fastners / hold fasts / SS Screws to be paid separately) 0.36 Cum 107050.56 Rupees One Lakh Seven Thousand Fifty and Fifty Six Paise Only 38538.20

10 Providing and fixing factory made uPVC door frame made of uPVC extruded sections [42 X 50]mm having an overall dimension as below (tolerance±1mm), with wall thickness 2.0mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the framesreinforced by galvanized M.S. tube of size [19 X 19]mm and 1mm (± 0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the framecomplete as per manufacturer’s specification, etc., all complete as directed by Engineer-in-Charge. 120.00 RM 304.42 Rupees Three Hundred Four and Forty Two Paise Only 36530.40

11 Providing and fixing to existing door frames 24mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size [59 x 24]mm and wall thickness 2mm (± 0.2 mm) with inbuilt edging on both sides.The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size [75 x 220]mm having wall thickness 1.0mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size [20 x 20]mm and 1mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size [100 x 24]mm and 2mm (± 0.20mm) wall thickness, fixed to the shutter styles by means of plastic / galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620mm, having over all thickness of 20mm and 1mm (± 0.10mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised M.S. rod and fastened with nuts and washers, etc., all complete as per manufacturer's specification and direction of Engineer-in-Charge. 36.00 Sqm 2727.94 Rupees Two Thousand Seven Hundred Twenty Seven and Ninety Four Paise Only 98205.84

12 Providing [40 x 5] mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block [30 x 10 x 15]cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size), etc., all complete as per direction of Engineer-in-Charge. 24.00 Each 210.25 Rupees Two Hundred Ten and Twenty Five Paise Only 5046.00

13 Providing and fixing 35mm thick flush door shutters conforming to IS :2202 (Part I) non-decorative type of approved brand / make, core of block board construction with frame of 1st class hard wood & lipping with 2nd class teak wood battens 25mm minimum depth on all edges and well matched commercial 3ply veneering with vertical grains or cross bands including ISI marked Stainless Steel butt hinges with necessary screws and face veneers on both faces of shutters, etc., all complete as per direction of Engineer-in-Charge. 24.00 Sqm 2805.94 Rupees Two Thousand Eight Hundred Five and Ninety Four Paise Only 67342.56

14 Providing and fixing bright finished brass handles of 125mm size with screws, etc., all complete as directed by Engineer-in-Charge. 20.00 Each 235.80 Rupees Two Hundred Thirty Five and Eighty Paise Only 4716.00

15 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc., all complete as directed by Engineer-in-Charge. 10.00 Each 111.77 Rupees One Hundred Eleven and Seventy Seven Paise Only 1117.70

16 Providing and fixing bright finished brass tower bolts of [250 x 10]mm (barrel type) with necessary screws, etc., all complete as directed by Engineer-in-Charge. 20.00 Each 405.71 Rupees Four Hundred Five and Seventy One Paise Only 8114.20

17 Providing and fixing bright finished brass 100mm mortice latch and lock with min. 6 levers and a pair of lever handles of approved quality with necessary screws, etc., all complete as directed by Engineer-in-Charge. 10.00 Each 785.19 Rupees Seven Hundred Eighty Five and Nineteen Paise Only 7851.90

18 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kgs and door width upto 700mm), with necessary accessories and screws, etc., all complete as directed by Engineer-in-Charge. 10.00 Each 1033.43 Rupees One Thousand Thirty Three and Forty Three Paise Only 10334.30

19 Providing and fixing aluminium sliding door bolts(aldrop) of [250 x 16]mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws, etc., all complete as directed by Engineer-in-Charge. 10.00 Each 239.42 Rupees Two Hundred Thirty Nine and Forty Two Paise Only 2394.20

20 Providing and fixing 20mm dia chromium plated brass curtain rod / Towel rail of 600mm long having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves, etc., wherever necessary, etc., all complete as directed by Engineer-in-Charge. 12.00 Each 216.78 Rupees Two Hundred Sixteen and Seventy Eight Paise Only 2601.36

21 Providing and fixing 5.0mm thick glass panes for doors, windows and clerestory window,ventilators (weight not less than 12.50 kg/Sq m), including cutting an dfinishing as per site requirement, etc., all complete as directed by Engineer-in-Charge. 30.00 Sqm 2389.11 Rupees Two Thousand Three Hundred Eighty Nine and Eleven Paise Only 71673.30

22 Providing and fixing aluminium handles of 125mm size, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws, etc., all complete as directed by Engineer-in-Charge. 48.00 Each 60.87 Rupees Sixty and Eighty Seven Paise Only 2921.76

23 Providing and fixing aluminium tower bolts of size [250 X 10]mm , ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyedto required colour or shade, with necessary screws, etc., all complete as directed by Engineer-in-Charge. 24.00 Each 105.80 Rupees One Hundred Five and Eighty Paise Only 2539.20

24 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc., all complete as directed by Engineer-in-Charge. 250.00 Kgs 122.84 Rupees One Hundred Twenty Two and Eighty Four Paise Only 30710.00

25 Providing and laying rectified Glazed Ceramic floor tiles of size [300 x 300]mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.30kg/ Sq m including grouting the joints with white cement and matching pigments, etc., all complete as directed by Engineer-in-Charge. 200.00 Sqm 1221.92 Rupees One Thousand Two Hundred Twenty One and Ninety Two Paise Only 244384.00

26 Providing and fixing Single socketed pipes of 110mm diameter unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A of approved brand, on wall face including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, etc., all complete as directed by Engineer-in-Charge. 60.00 Metre 346.73 Rupees Three Hundred Forty Six and Seventy Three Paise Only 20803.80

27 Providing and fixing Single socketed pipes of 75mm diameter unplasticised Rigid PVC water pipes conforming to IS : 13592 Type A of approved brand, on wall face including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, etc., all complete as directed by Engineer-in-Charge. 60.00 Metre 228.58 Rupees Two Hundred Twenty Eight and Fifty Eight Paise Only 13714.80

28 Plastering to internal brick / block wall with 15mm thick on the rough side of single or half brick wall of cement mortor (1:6) including leveling, curing and making the level smooth and at all heights, plaster drip course / groove in plastered surface or moulding to R.C.C. projections and execute the work complete as per direction of Engineer-in-Charge. 480.00 Sqm 387.89 Rupees Three Hundred Eighty Seven and Eighty Nine Paise Only 186187.20

29 Plastering to ceiling with 12mm thick on the rough side with cement mortor (1:4) including leveling,curing and making the level smooth and at all heights and execute the work, etc., complete as per direction of Engineer-in-Charge. 120.00 Sqm 318.85 Rupees Three Hundred Eighteen and Eighty Five Paise Only 38262.00

30 Plastering to external brick / block wall with 18mm cement plaster in two coats under layer 12mm thick cement plaster on the rough side with cement mortor 1:5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement : 6 fine sand) including leveling, curing and making the level smooth and at all heights, plaster drip course / groove in plastered surface or moulding to R.C.C. projections and execute the work complete as per direction of Engineer-in-Charge. 60.00 Sqm 512.42 Rupees Five Hundred Twelve and Forty Two Paise Only 30745.20

31 Providing and applying internal wall and ceiling painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50grams / litre after applying white cement based putty of average thickness 1mm over the plastered wall surface including preparation of the surfces, with a coat of low VOC primer with emery paper to bring to smooth and even including applying additional coats wherever required to achieve even shade and colour of approved brand, etc., complete as per direction of Engineer-in-charge. 200.00 Sqm 342.51 Rupees Three Hundred Forty Two and Fifty One Paise Only 68502.00

32 Providing and finishing old walls in two or more coats with Premium Acrylic Smooth exterior paint with Silicone additives of approved brand of required shade @ 1.43 ltr / 10 Sq m over existing cement paint surface after Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches, etc., all complete as per direction of Engineer-in-Charge. 200.00 Sqm 143.74 Rupees One Hundred Forty Three and Seventy Four Paise Only 28748.00

33 Providing and Finishing walls with Acrylic Smooth exterior paint for new walls of required shade for New work (Two or more coat applied @ 1.67 ltr/10 Sq m over and including priming coat of exterior primer applied @ 2.20 kg/10 Sq m) including scrapping, preparation of surface for completing the work as per direction of Engineer-in-charge. 50.00 Sqm 147.55 Rupees One Hundred Forty Seven and Fifty Five Paise Only 7377.50

34 Providing and applying synthetic enamel paint for wooden / steel surface in Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture, filling joints, patti, etc., all complete as per direction of Engineer-in-Charge. 75.00 Sqm 272.50 Rupees Two Hundred Seventy Two and Fifty Paise Only 20437.50

35 Dismantling 15 to 40mm dia G.I. / CPVC pipe including stacking of dismantled pipes (within 50 metres lead) including making temporary arrangements for continuing ongoing services to toilets, etc., all complete as directed by Engineer-in-Charge. 120.00 RM 2.99 Rupees Two and Ninety Nine Paise Only 358.80

36 Fixing chowkhat in existing opening in brick / RCC wall with dash, fasteners / Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners / chemical fastener, etc., all complete as directed by Engineer-in-Charge. 10.00 Each 199.46 Rupees One Hundred Ninety Nine and Forty Six Paise Only 1994.60

37 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba, making temporaray arrangements for blocking service lines to avoid water leakages, etc., all complete as directed by Engineer-in-Charge. 24.00 Each 123.20 Rupees One Hundred Twenty Three and Twenty Paise Only 2956.80

38 Repair to plaster of thickness 12mm to 20mm in patches of area lesser than 2.50Sq m including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, without causing hindrance / protecting the existing floor finish work, etc., all complete as directed by Engineer-in-Charge. 30.00 Sqm 616.42 Rupees Six Hundred Sixteen and Forty Two Paise Only 18492.60

39 Disconnecting damaged overhead / terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level, etc., all complete as directed by Engineer-in-Charge. 6.00 Each 398.50 Rupees Three Hundred Ninety Eight and Fifty Paise Only 2391.00

40 Demolishing brick work with cement mortar manually / by mechanical means, after disconnecting the electrical service and AC lines if any, including stacking of serviceable material and disposal of dismantled materials up to a lead of 10 kilometre outside HAL, etc., all complete as directed by Engineer-in-Charge. 18.00 Cum 2324.02 Rupees Two Thousand Three Hundred Twenty Four and Two Paise Only 41832.36

41 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge. Nominal concrete 1:4:8 or richer mix (i/c equivalent design mix)and including stacking material and disposal of dismantled materials up to a lead of 10 kilometre outside HAL, after making temporary proetction for existing service lines, etc., all complete as directed by Engineer-in-Charge. 20.00 Cum 1812.65 Rupees One Thousand Eight Hundred Twelve and Sixty Five Paise Only 36253.00

42 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts, etc., complete and stacking within 50 metres lead of area 3 Sq. metres and below, including stacking material and handing over the useful materials to HAL maintenance department and disconnecting the service lines if any, etc., all complete as directed by Engineer-in-Charge. 10.00 Each 337.36 Rupees Three Hundred Thirty Seven and Thirty Six Paise Only 3373.60

43 Dismantling / removing tile work (for thickness of tiles 10mm to 25mm) of in floors and in walls laid in cement mortar after disconnecting the electrical service and AC lines if any,including stacking material and disposal of dismantled materials up to a lead of 10 kilometre outside HAL, etc., all complete as directed by Engineer-in-Charge. 400.00 Sqm 498.69 Rupees Four Hundred Ninety Eight and Sixty Nine Paise Only 199476.00

44 Providing and fixing beveled edge mirror of size [600 x 450]mm of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers, etc., all complete as directed by Engineer-in-Charge. 15.00 Each 1477.27 Rupees One Thousand Four Hundred Seventy Seven and Twenty Seven Paise Only 22159.05

45 Providing and fixing Wall hung half pedestal Vitreous China Wash basin size of approx size [630 x 450]mm fixed with with C.I. brackets / rack bolts, single 15mm C.P. brass pillar taps, 32mm C.P. brass waste coupling of standard pattern, P.V.C. waste pipe with waste fittings of 40mm dia and make it function of approved brand / make, including painting of fittings and brackets, cutting and making good the walls wherever required, etc., all complete as directed by Engineer-in-Charge. 15.00 Each 2152.64 Rupees Two Thousand One Hundred Fifty Two and Sixty Four Paise Only 32289.60

46 Providing & fixing White vitreous china Orissa pattern water closet squatting pan of approx size (580mm X 440mm) or nearest available size along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, etc., all complete as directed by Engineer-in-Charge. 15.00 Each 6217.41 Rupees Six Thousand Two Hundred Seventeen and Forty One Paise Only 93261.15

47 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) of approved brand with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all connecting fittings and fixtures to make it operational completely, including cutting and making good to the walls and floors wherever required, etc., all complete as directed by Engineer-in-Charge. 10.00 Each 5986.03 Rupees Five Thousand Nine Hundred Eighty Six and Three Paise Only 59860.30

48 Providing and fixing 8mm dia C.P. / S.S. Jet (Health Fuacet) with flexible tube upto 1 metre long with S.S. triangular plate on walls / Eureopean type W.C. material of approved make and quality, etc., all complete as directed by Engineer-in-Charge. 10.00 Each 320.78 Rupees Three Hundred Twenty and Seventy Eight Paise Only 3207.80

49 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of [430 x 260 x 350]mm and [340 x 410 x 265]mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required, etc., all complete as directed by Engineer-in-Charge. 25.00 Each 5750.10 Rupees Five Thousand Seven Hundred Fifty and Ten Paise Only 143752.50

50 Providing, fixing, testing and commissioning trap (floor trap) of approved make with 100mm inlet and 75mm outlet of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors , connection with PVC soil / waste pipe, necessary 150mm thick cement concrete (1:2:4) for embedding the trap, etc., all complete as directed by Engineer-in-Charge. 50.00 Each 543.34 Rupees Five Hundred Forty Three and Thirty Four Paise Only 27167.00

51 Constructing masonry Chamber (60 x 60 x 75)cm inside or outside (or approx. size as per site condition), in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5., etc., all complete as directed by Engineer-in-Charge. 12.00 Each 9979.60 Rupees Nine Thousand Nine Hundred Seventy Nine and Sixty Paise Only 119755.20

52 Providing and fixing 15mm nominal bore dia C.P. brass bib cock of approved quality conforming to IS:8931, all complete as directed by the Engineer-in-Charge. 25.00 Each 465.62 Rupees Four Hundred Sixty Five and Sixty Two Paise Only 11640.50

53 Providing and fixing Concealed Chlorinated Polyvinyl Chloride (CPVC) pipes of approved brand, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing, necessary reducers,unions,collars,bends, tank adaptors, etc., This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints and making good the walls, etc., all complete as directed by Engineer-in-Charge.

a) 15mm dia 75.00 RM 457.35 Rupees Four Hundred Fifty Seven and Thirty Five Paise Only 34301.25

b) 20mm dia 120.00 RM 493.92 Rupees Four Hundred Ninety Three and Ninety Two Paise Only 59270.40

c) 25mm dia 40.00 RM 576.28 Rupees Five Hundred Seventy Six and Twenty Eight Paise Only 23051.20

d) 32mm dia 25.00 RM 679.22 Rupees Six Hundred Seventy Nine and Twenty Two Paise Only 16980.50

e) 40mm dia 15.00 RM 517.30 Rupees Five Hundred Seventeen and Thirty Paise Only 7759.50

54 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms(or nearest availabe size and weight), etc., all complete as directed by Engineer-in-Charge. 15.00 Each 102.40 Rupees One Hundred Two and Forty Paise Only 1536.00

55 Providing and placing on terrace (at all floor levels) polyethylene water storage tank of 500/1000 Litres capacilty , IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes, etc., all complete as directed by Engineer-in-Charge. 6000.00 per litre 10.11 Rupees Ten and Eleven Paise Only 60660.00

56 Providing and fixing C.P. brass long / pillar body bib cock of 15mm nominal bore, approved quality conforming to IS standards and weighing not less than 690 gms, etc., all complete as directed by Engineer-in-Charge. 10.00 Each 734.03 Rupees Seven Hundred Thirty Four and Three Paise Only 7340.30

57 Supply and Making connection of drain pipes of 100 to 250mm diamete or sewer line with existing manhole including breaking/cutting into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with C.M 1:3 ( 1 cement : 3 caorse sand ), finished with a floating coat of neat cement and making necessary channels for the drain, etc., all complete as directed by Engineer-in-Charge. 75.00 Each 744.58 Rupees Seven Hundred Forty Four and Fifty Eight Paise Only 55843.50

58 Dismantling of old S.W. pipes of 100mm diameter including breaking of joints and bed concrete stacking of useful materials near the site within 50m lead and disposal of unserviceable materials into municipal dumps and making temporary arrangements to protect / countinue ongoing service lines of other floors, etc., all complete as directed by Engineer-in-Charge. 75.00 RM 81.77 Rupees Eighty One and Seventy Seven Paise Only 6132.75

59 Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, filling up the gaps at junctions, with dash fasteners and EPDM rubber/neoprene gasket, etc., all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing, paneling and dash fasteners to be paid for separately) 125.00 Kg 487.75 Rupees Four Hundred Eighty Seven and Seventy Five Paise Only 60968.75

60 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows, shutters and partition frames with C.P. brass / stainless steel screws, etc., complete as per architectural drawings and directions of Engineer-in-Charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side 25.00 Sqm 1046.71 Rupees One Thousand Forty Six and Seventy One Paise Only 26167.75

61 Providing and fixing glazing in aluminium door, window, ventilator, shutters and partitions etc. with EPDM rubber / neoprene gasket, etc., complete as per the architectural drawings and the directions of Engineer-in-Charge. With float glass panes of 5mm thickness (weight not less than 12.50 kg/Sq m) 15.00 Sqm 1383.15 Rupees One Thousand Three Hundred Eighty Three and Fifteen Paise Only 20747.25

Sub-Total (Excluding GST) Rupees Thirty One Lakh Seventy Nine Thousand Eight Hundred Fifty and Nine Paise Only 3179850.09

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 3179850.09 BELOW % 3179850.09

Add 18% GST Rupees Five Lakh Seventy Two Thousand Three Hundred Seventy Three and One Paise Only 572373.02

Grand Total (Including GST) Rupees Thirty Seven Lakh Fifty Two Thousand Two Hundred Twenty Three and Ten Paise Only 3752223.11

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

Facilities Management Division

Pre-Qulification Profile (To Be uploaded along with Part A)

Tender Ref No. or Contract No.: HAL/FMD/R-104/24-25

Name of Work: Renovation of Multiple Rest Rooms located at various locations in Aircraft Division, HAL [BC].

Estimated Amount in Rs.: 3750000

Tender Notice Date : 23.11.2024

PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3

Sl.No Description Details Enclosed / Not Enclosed Remarks

1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual/firm/company

2 Type of ownership PlsEnter Type of Ownership

If Other, please specify

3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc., Pls enter Details of Constitution

4 Address for correspondence: Pls Enter Address

5 (a) PAN No.: Pls Enter Pan NO

5 (b) Service Tax Registration No

5 (c ) Goods and Service Tax ID No.

6 Contact details

Contact person name Please Enter Contact person Name

Mobile No. Pls Enter Mobile No

Ph. No. with STD code

FAX No. with STD code 3 #N/A

7 Registered Contractor

If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1

Registration No. 199999 7 F 2

Category 200000 6 G 3

PEMD Amount ( If paid ) 499999 6 H 4

8 I.T Returns for past 03 years 999999 5 J 6

2024-25 Pls Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7

9 Average annual financial turn over during the last 3 years, ending 31st March 2024 of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3

YEAR TURN OVER IN Rs. Enclosed / Not Enclosed REMARKS 5000000 2

2023- 2024 Rs. Pls Enter Turn over in Rupees for all the 3 years 7499999 2

Average annual Financial turn over 0.00 1125000.00

Avg Annual Turnover criteria is not met 10000000 1

10 ESI & PF Nos with proof Nos Enclosed / Not Enclosed

ESI Registration No/. with proof if any Remarks if any

PF Registration No. with proof if any

11 Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Name of the Bank

Type of Account

12 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission solvency cal

Name of Bank & Branch Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs #REF! 28-Jun 0 40000

Date of Issue 200000 40000

Value in Rs. 200001 150000

Solvency value is NOT as per NIT

13 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender. 1500000 500001 250000

Completed similar works during last 7 years Pls Select %of similar works completed during last 7 years 1000000 250000

Work NoI Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000

Brief Description of Work: Please enter Details for Work No 1 2000000 500000

Completed value of Work in Rs. 2000001 1000000

Date of Commencement of Work 4000000 1000000

Date of Actual Completion of Work: 4000001 2000000

Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000

Brief Description of Work: Pls Enter Details for Work No II

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work: work done

Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal #REF! 2555

Brief Description of Work: Pls Enter Details for Work No III #REF!

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work:

14 Details of person holding the power of Attorney (If different from contact person)

Name Related Document to be Uploaded to eProcurement Portal

Mobile No. Pls Enter Details for Person holding Power of Attorney

Ph. No. with STD code

FAX No. with STD code

15 DECLARATION I

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.

16 DECLARATION II

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Pls Accept the Delaration II