Repair of Bhaddi Distribution System off taking at tail of Rising main Scheme-2 of Kandi canal Stage-2

Amount

WATER SUPPLY

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of mbeds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water,diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

((a)) Earth work upto 1.5 m. Depth for

(ii) For Ordinary soil having gravel upto 40%

(10) Supplying and fixing of ISI Marked CI D-joint (complete with nut, bolts & rubber ring) as per IS:8794 for repair of pipe line including cutting , jointing and testing etc. but excluding cost of excavation complete.

(29) Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete.

((d)) C.I Single air valve screwed (Size 50mm)

(66) Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

(a) Size 0.6 m. x 0.6 m.

(b) Size 0.9 m. x 0.9 m.

Supply and fixing of Socketed upvc pipe ISI mark confirming to ISI 4985 ( Premimum make such as Supreme/Finolex/Jain etc.) 140 mm dia. UPVC pipe 2.5 kg/cm2 pressure

Supply and fixing of Socketed upvc pipe ISI mark confirming to ISI 4985 ( Premimum make such as Supreme/Finolex/Jain etc.) 160 MM dia. UPVC pipe 2.5 kg/cm2 pressure

Supply and fixing of Socketed upvc pipe ISI mark confirming to ISI 4985 ( Premimum make such as Supreme/Finolex/Jain etc.) 200 mm dia. UPVC pipe 2.5 kg/cm2 pressure

BRICK WORK

(11.7) First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

PLASTERING & POINTING

(15.9) 12.5 mm thick cement plaster 1:4

STEEL AND IRON WORK

(18.18) Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Providing & Fixing CI/DI Flange end , stem of SS(AIS1410) and Bronze (Gunmetal) working part sluice valve ISI marked 14846 -2000 including jointing, testing and cost of nut, Bolt and inseration sheet, all cariage complete (with the approval of Engineer in-charge) (B) Class PN 1.6 as per ISI (c) 150 mm i/d slucie Valves Flanged

Providing & Fixing CI/DI Flange end , stem of SS(AIS1410) and Bronze (Gunmetal) working part sluice valve ISI marked 14846 -2000 including jointing, testing and cost of nut, Bolt and inseration sheet, all cariage complete (with the approval of Engineer in-charge) (B) Class PN 1.6 as per ISI (d) 200 mm i/d slucie Valves Flanged

Supply and fixing Alpha valve including carriage, re handling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge140 mm dia. Alpha valve

Supply and fixing Alpha valve including carriage, re handling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge 160 mm dia. Alpha valve

Supply and fixing Alpha valve including carriage, re handling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge 200 mm dia. Alpha Valve

Providing & fixing uPVC Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling If any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 140 mm dia uPVC Bend (6 kg/cm2 pressure)

Providing & fixing uPVC Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 160 mm dia uPVC Bend (6 kg/cm2 pressure

Providing & fixing uPVC Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 200 mm dia of uPVC Bend (6 kg/cm2 pressure)

Supply of UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.140 mm dia UPVC equal-Tee of 6kg/cm2

Supply of UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.160 mm dia of UPVC equal-Tee of 6 kg/cm2 pressure

Supply of UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.200mm dia of UPVC equal-Tee of 6 kg/cm2 pressure

Supply fixing flange tail end point with CI flange inculding carriage rehandling loading and unloading , testing etc. complete in all respects as per PWD specifications or instructions of Engineer-in-charge CI flange of 160 mm dia

Supply fixing flange tail end point with CI flange inculding carriage rehandling loading and unloading , testing etc. complete in all respects as per PWD specifications or instructions of Engineer-in-charge 200 mmof flange tail end point with CI flange

Supply and fixing socket including cariage ,re-handling loading unloading , testing etc.respect as per PWD specifications and instructions of the Engineer-in-Charge socket /coupler of 140 mm dia.

Supply and fixing socket including cariage , re-handling loading unloading , testing etc.respect as per PWD specifications and instructions of the Engineer-in-Charge socket /Coupler 160 mm dia.

Supply and fixing socket including cariage , re-handling loading unloading , testing etc.respect as per PWD specifications and instructions of the Engineer-in-Charge socket of 200 mm dia.

Supply of UPVC reducers/increase of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. 200-160 mm UPVC reducers/increase of 6 kg/cm2 pressure

CONCRETE

1:2:4 Cement concrete

manual means mixing by

any other item

RAJ KUMAR