REPAIR TO PVC WALL PANELLING, FALSE CEILING, JOINERY AND ALUMINIUM WORK IN CERTAIN UNITS UNDER AGE BR-III AT MIL STN JAISALMER

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and directed by Engineer-in-charge.

M&L for 25mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in subbase of floors & finishing the surface even & fair without using extra cement complete all as specified & directed by Engineer-in-Charge.

M&L for Non Skid ceramic tiles colour jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified.

S&F glazed ceramic coloured tiles (Joint less) of size 450mmx350mm x7mm thick on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing coat in CM (1:4) complete all as specified and directed by Engineer-in-charge.

M&L light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm (including 600mmx600mm size), in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6) complete all as specified & directed by Engineer-in-charge.

Demolition of cement concrete unreinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance complete all as specified & directed by Engineer-in-charge.

M&L for 75 mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in sub base of flooring/ hard standing complete all as specified & directed by Engineer-in-Charge.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning complete all as specified & directed by Engineer-in-charge. Note :- (i) Pattern of interlocking tile to be rubber moulded or equivalent as approved by GE. (ii) Rate quoted by the contractor shall deemed inclusive of PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) packing and finished even and fair to the sides of pavement.

M&L plain cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, in lintels up to 1.5 m clear span, cills steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straigth or curved) complete all as specified & directed by Engineer-in-charge.

Dismantling structure steel works including door gates but excluding framed trusses etc complete all as specified & directed by Engineer-in-charge.

S&F rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated) conform to Fe 410-W (Gde E-250 quality-A) complete all as specified & directed by Engineer-in-charge.

S&F, rolled mild steel framed work as in doors or gates of angle or other section confirming to Fe 410-W (Gde E-250 quality-A) with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, fittings and hanging, also fastering and fixing complete all as specified & directed by Engineer-in-charge.

S&F aluminium (Die cast) door closer hydraulically regulated designation No. 3, universal type, suitable for door shutter of 851 mm to 1000mm in width and of weight between 61 to 80 Kg complete all as specified & directed by Engineer-in-charge.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern in roof covering complete all as specified & directed by Engineer-in-charge.

S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet/ semi corrugated 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified & directed by Engineer-in-charge.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed by Engineer-in-charge.

M&L rendering 15mm thick in 1:6 cement plaster on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.

M&L rendering 15mm thick in 1:4 cement plaster on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.

M&L for rendering 5 mm thick in CM (1:4) on fair faces of concrete surfaces as in ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified & directed by Engineer-in-charge.

M&L for preparing new plastered or unplastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed by Engineer-in-charge.

M & L preparation of new plastered surfaces of walls and applying two coat of oil bound distember over a coat of primer complete all as specified & directed by Engineer-in-charge.

Taking down Chowkhats or frames with shutter (without taking off shutters from the frames) not exc. 1.5 Sqm each and removing to store complete all as specified & directed by Engineer-in-charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified & directed by Engineer-in-charge.

S&F, 75 mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required all as specified & directed by Engineer-in-charge.

Supply and fixed aluminium handles, cast type, anodised 150 mm size complete all as specified & directed by Engineer-in-charge.

Supply and fixed aluminium handles, cast type, anodised 125 mm size complete all as specified & directed by Engineer-in-charge.

S&F 150 mm size aluminium anodised barrel tower bolts of extruded section complete all as specified & directed by Engineer-in-charge.

S&F 250 mm aluminium anodized sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified & directed by Engineer-in-charge.

M&L for 35mm thick precast cement concrete louvers and jallies type C-0 (1:3:6) using 12.50mm graded aggregate (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 including dismantling Trellis work (Jafri) one way, including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed by Engineer-in-charge.

M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, kerb stone, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straigth or curved) complete all as specified & directed.

S&F in repair aluminum anodised /power coated partition wall of aluminum section 100mm x 44mm x 2mm thick frame rectangular section and panel of PVC sheet or prelaminated board in bottom panel and 5.5mm thick sheet glass in top panel with rubber lining and aluminum beading around length including necessary fixing arrangement for bottom and top member of aluminum frame in floor/PCC/Brick work as per site requirement with rawl plug etc, including chromium plated steel screws 60cm centre to centre all as specified and directed by Engineer-in-Charge Note : Cost of PVC panel or prelaminated board and sheet glass shall deemed included in the unit rate of this item.

Supply fabricating and fixing in repair of aluminium door powder coated of extrusion aluminium section including frame work complete, consisting of frame vertical and horizontal members, of size 104mm x 44.45mm x 1.8mm thick. Vertical style of door shutter of size 85mm x 44.45mm x 1.8mm thick. Top, middle and bottom rail of size 85mm x 44.45 x 1.8mm thick and fixing 5 mm thick plain/tinted sheet glass of Modi guard/Atul or prelaminated particle board 9 to 10mm thick of make Kit Ply with aluminium bedding and rubber gasket/beading including frosted film as desired fixing of hydraulic floor spring one in single leaf or two nos in double leaf door of Make Kelvin/Evershine. One mortice lock for aluminium door (each) and two aluminium tower bolts for each door. Fixed with rawl plug including rectification of floor/wall to match the existing surfaces. All as specified and as directed by Engineer-in-Charge at site. (Cost of sheet glass/frosted film & sun control film shall be included in the unit of this item)

S&F of powder coated aluminum sliding window comprising of sliding runner of three way (track), consisting of two sliding shutter duly fitted with 5.0 mm thick galss and one shutter duly fitted with stainless steel wire cloth of 0.36 mm nominal dia of wire & average width of aperature 1.4 mm with and incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc and down push type locking arrangement in glass shutter, incl necessary fixing arrangement i.e. rawl plug etc, complete all as specified and directed by Engineer-in-Charge

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed by Engineer-in-Charge

Supply & fixing of false ceiling in step (s) comprising of 12 mm thick Gypsum board including GI frame work for seamless ceiling made of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 M length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including two coats of plastic emulsion paint complete all as directed including dismantling. Note : The measurement shall be made from wall to wall without considering step(s)/overlap at steps.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on and including 5mm thick PVC sheet fillets of width 50mm for wall paneling inclusive of fixing on wall to make frame and including taking down existing wall panelling including frames complete all as specified & directed by Engineer-in-charge.

M&L for applying primer coat with two coats of acrylic based polymer modifed cementitious elastmeic flexible composite coating system, Make CICO TAPECRETE-P 151 and equivalent in fosroc/bostic/pidilite mixed with neat fresh cement in the ratio 1:1 by weight and as directed by the Engineer-in-Charge.

M&L for applying polyurethane based tar extended seamless elastomeric protective system conforming to ASTM C-836-03 and ATSM C-898-09 ideally suited for water proofing of roof walls and foundation. Make : CICO CORCHEM 2061/fosroc/bostice/pidilite and equivalent and the following the single component solvent based polyurethane compound CORCHEM 2P and equivalent as a primer before application complete all as directed by the Engineer in Charge.

M&L for 10mm thick rendering in cement morter 1:4 on fair face of brick wall or concrete surfaces, finished even & fair including mixing of waterprofing compound as per manufactures instruction complete all as specified and directed by Engineer-in-charge. Note :- Supply only WPC shall be measured and paid seperately as supply only.

Supply only integral water proofing compound complete all as specified and directed by Engineer-in-charge.

S&F in repair mild steel Mortice lock, vertical type, 4 layer 75 mm complete all as specified and directed by Engineer-in-charge.

S&F in repair mild steel rebated mortice lock, vertical type, 4 layer 100 mm complete all as specified and directed by Engineer-in-charge.

S&F in repair ball bearing for rolling shutters complete all as specified and directed by Engineer-in-charge.

S&F steel rolling shutter (thickness of lath 1.25mm thick) without ball bearing as specified including top hood cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete gear operated type with chain wheel and hand chain and including taking down existing shutter of any thickness complete all as specified & directed by Engineer-in-charge.

BHARAT CONSTRUCTION AND SERVICES

AMBEY MAA CONSTRUCTION COMPANY

Aman Enterprises

S K TRADER

M/s Shri Inder Construction Company

M/S MAYA CONSTRUCTION COMPANY

BHAGWATI CONSTRUCTION

S AND S Constructions