REPAIR/MAINTENANCE WORKS TO TRADE PATTERN FURNITURE/ MAP FURNITURE ETC FOR OTM ACCN AND MD ACCN OF OFFRS/ JCOS/ OR UNDER GE (WEST) JALANDHAR CANTT

Amount

CHAIR SCHOOL WITH HARD BOARD (Drg No FD/E6/MAP/05 Ser 1/1) Replacement of PVC seat, 4mm thick with 4x10mm ribs running in longitudinal & transverse direction, moulded internally with seat, to be fitted with screws made of alumunium alloy complete all as specified.

Supply and fixing openable top, 18mm thick prelaminated particle board of extenior grade conforming to IS-12823 duly fitted to slide on the right frame. The edge of top shall be provided with 1.5mm thick PVC beading fixed with wire nails complete all as specified.

Taking out unserviceable rubber shoe and supply and fix rubber shoes size and shaps exists all as shown on drg complete all as specified.

Material and labour for preparation of old painted steel surfaces of chair school with hand board, cleaning including removing dents if any, priming dents portion and applying one coat of synthetic enamel paint of Black colour by spray painting (with spray Gun) complete all as specified and directed by Engr-in- Charge.

CHAIR VARANDAH (Drg No FD-MAP-11/15 & FD -259) Welding to leg joints any size, electric arc or gas welding, joints of welded portion finished smooth complete all as specified.

Material and labour for recanning of chair verandah (Godrej pattern) with and including half round plastic cane 2mm to 2.5mm wide and for border 3mm wide cane plastic cane shall be conforming to IS: 5378-1994 type-I(HDPE) and type–II (LDPE) including cutting and removing of old unserviceable cane from the frame complete all as specified. Make of Cane : Shah Plastic/Premier or equivalent

Material and labour for preparation of old steel surfaces of chair verandah and applying one coat of synthetic enamel paint (white) with brushes complete all as specified.

CHARPOY GI PIPE (Drg No FD-220) Supply and fixing in replacement, long rail, 1.88 m long made out of 32mm dia, GI pipe, medium grade, cut to required length, threading both ends and including taking out old unserviceable long rail from GI charpoy frame complete all as specified. Make of pipe:- JINDAL/ TATA/ PARKASH/ BST/ OSWAL

Fixing only, in replacement, short rail, 0.815 m long made out from old long rail 32mm dia, retrieved from Srl item No 3.00 here-in-before including cutting and threading both end Supply and fixing in position including taking out old unserviceable short rail from GI charpoy frame complete all as specified. Note:- Long rails retrieved from Srl Item No 3.00 shall be converted into two short rails and credit recovered for balance unservicable pipe.

Supply and fixing GI check nut duly threaded (ISI marked) suitable for 32mm dia GI pipe including taking out old unserviceable check nut from GI charpoy frame complete all as specified.

Supply and fixing GI elbow 3 way duly threaded (ISI marked) suitable for 32mm dia GI pipe including taking out old unserviceable elbow from GI charpoy frame complete all as specified.

Supply and fixing in replacement 12mm thick plywood, 7 ply, commercial BWR type, size 1980x900mm fixed with 10 nos bolts & nuts including washers (3 nos on long rail & 2 nos on short rail each) including Supply and fixing flat iron stiffeners/supports 3 nos made out of 40x4mm flat iron, 850mm long, welded to long rails, gap between rails and plywood top to be filled with 4mm thick 40mm wide , stiffeners/supports also to be fixed with plywood top with 2 nos bolts & nuts provided to each stiffeners/supports including painting to mild steel work with synthetic enamel paint black, including removal of unserviceable newar, tightening of check nuts, elbows, rails, legs etc complete all as specified.

TABLE PEG (Drg No FD-384) Material and labour for replacement of top of table, size 450mm x 300mm, made out of 18mm thick pre-laminated particle board (exterior grade) melamine faced ISI marked complete all as specified and as directed.

Material and labour for replacement of leg made out of 1st class hard wood (Sheesham), size and shape as shown on drg complete all as specified and as directed.

Material and labour for replacement of long rail made out of 1st class hard wood (Sheesham), size and shape as shown on drg complete all as specified and as directed.

Material and labour for replacement of stiffners made out of 1st class hard wood (Sheesham), size and shape as shown on drg complete all as specified and as directed.

Material and labour for replacement of short rail made out of 1st class hard wood (Sheesham), size and shape as shown on drg complete all as specified and as directed.

Material and labour for preparation of surface of table with sand papers for smoothening, removing scratches, spot and dots etc and polishing with french polish complete all as specified and as directed.

Material and labour for providing PVC shoes of best quality including removing of old unserviceable PVC shoes complete all as specified.

MIRROR DRESSING GENTS (Drg No FD-E6/MAP/16) Supply and fixing in repairs new back of dressing mirror gents made out of 12 mm thick commercial ply wood rest all as shown on drg and all as specified and directed.

Removing of existing unserviceable sides of dressing mirror gents and Supply and fixing new side of size 1200 X 100 mm made out of 18mm thick prelaminated MDF board exterior grade with decorative finish both side , rest all as shown on drg and all as specified and directed.

Removing of existing unserviceable side (Top/Bottom) of dressing mirror gents and Supply and fixing new side (Top/Bottom) of size 600 X 100 mm made out of 18mm thick prelaminated MDF board exterior grade with decorative finish both side ,rest all as shown on drg and all as specified and directed.

Supply and fixing in repairs of glass shelves of dressing mirror gents 5 to 5.5 mm thick including supply & fixing of runner/glass holder to the dressing mirror gents, rest all as shown on drg and all as specified and directed.

Supply and fixing in replacement looking mirror 5.5mm thick fixed on 12mm thick BWR grade ply as per IS-303 covered by decocrative PVC mould and supported on 50x28mm Teak wood frame complete all as specified.

Supply and fixing in replacement of continous piano hinges to open the mirror frame in horizental circle complete all as specified.

Supply and fixing magnetic catcher-02 Nos at top & bottom, inside the cabinet to catch mirror frame of best quality duly apporved complete all as specified.

CHAIR DINING PVC SEAT (FD/MAP-II/04&FD/E6/MAP/10) Removing the existing unserviceable rear leg and providing with new teak wood rear leg rest all as shown on drg and all as specified and directed.

Removing the existing unserviceable front leg and providing with new teak wood front leg rest all as shown on drg and all as specified and directed.

Removing the existing unserviceable back rest and providing new teak wood back rest slightly curved rest all as shown on drg and all as specified and directed.

Removing the existing unserviceable front/rear/side rail and providing new teak wood front rail rest all as shown on drg and all as specified and directed.

Removing the existing unserviceable PVC seat and Supply and fixing new PVC Seat to the chair with suitable steel/wooden screws rest all as shown on drg and all as specified and directed.

Material and labour for preparation of surface of chair with sand papers for smoothening, removing scratches, spot and dots etc including providing bamboo pins to joints where required and polishing with french polish complete all as specified and directed.

Material and labour for replacement of old unservicable cushion with new cushion 40 denisity for three seater sofa of trade pattern as per sample kept in BSO (W) JRC Yard duly covered with tapestry cloth best quality, complete all as specified and directed. Make: Kurlon or equivalent.

Material and labour for replacement of old unservicable cushion with new cushion 40 denisity for single seater sofa of trade pattern as per sample kept in BSO (W) JRC Yard duly covered with tapestry cloth best quality, complete all as specified and directed. Make: Kurlon or equivalent.

TABLE DINING FOR FOUR PERSONS (Drg No FD-273) Material and labour for replacement table dining top of size 1200 mm x 900mm, made of 18mm thick pre-laminated particle board (Exterior Grade) melamine faced ISI marked including 18mm x 4mm teak wood beading all around the table complete all as specified and as directed.

Material and labour for replacement of front or rear rail made of 1st class hard wood (Sheesham), size and shape as shown on drg including finishing the exposed surface with french polish complete all as specified and as directed.

Material and labour for replacement of side rail made of 1st class hard wood (Sheesham), size and shape as shown on drg including finishing the exposed surface with french polish complete all as specified and as directed.

Material and labour for replacement of leg made of 1st class hard wood (Sheesham), size and shape as shown on drg including finishing the exposed surface with french polish complete all as specified and as directed.

Material and labour for preparation of surface of table Dining four person with sand papers for smoothening, removing scratches, spot and dots etc including providing bamboo pins to joints where required and polishing with french polish complete all as specified and directed.

TABLE CENTRE (Drg No FD-274) Material and labour for replacement of table centre top of size 900x450mm made of 18mm thick prelaminated particle board (exterior grade) ISI marked including 18mmx4mm teak wood beading all around the table complete all as specified and as directed.

Material and labour for replacement of leg made of 1st class hard wood (Sheesham) size and shape as shown on drg complete all as specified.

Material and labour for replacement of front or rear rail made of 1st class hard wood (Sheesham) size and shape as shown on drg complete all as specified.

Material and labour for replacement of side rail made of 1st class hard wood (Sheesham) size and shape as shown on drg complete all as specified.

Material and labour for preparation of surface of table centre person with sand papers for smoothening, removing scratches, spot and dots etc including providing bamboo pins to joints where required and polishing with french polish complete all as specified and directed.

TV TROLLY (Drg No FD/E6/MAP-4) Material and labour for replacement of shelf of tv trolly made out 19mm thick prelaminated particle board as per pattern existing complete all as specified.

Material and labour for replacement of unservicable tv trolly openable glass shutter 5.5mm with magnet catchers with all complete accessories including all around as per drg complete all as specified.

Material and labour for replacement of unservicable tv trolly top made of 18/19mm thick prelaminated particle board of teak shade, with teak wood edge moulding all around as per drg complete all as specified.

Material and labour for replacement of unservicable tv trolly back made of 18/19mm thick prelaminated particle board as per drg complete all as specified.

Material and labour for replacement of unserviceable tv trolly both sides made of 18/19mm prelaminated particle board as per drg complete all as specified.

Material and labour in replacement of nylon castor wheels complete all as specified.

CHAIR WRITING STEEL/CHAIR VISITOR STEEL (Drg NoTP & MAP SERIES ) Supply and fixing in replacement PVC arm of Chair Writing MAP with new PVC arm (2 Nos) all as per existing size, shape and pattern as shown on drg complete all as specified.

Supply and fixing in replacement of old unservicable cushion with new cushion 40 density, with PVC lipping all around including new hot pressed plywood 12mm complete all as specified and as directed. Make: Kurlon or equivalent.

All as per Srl Item No 10.00 here-in-before but for back of chair complete all as specified.

Material and labour for preparation of old steel surface of chair writing and applying one coat of black Japan paint (1st quality ) complete all as specified.

CHAIR COMPUTER (Drg No FD/E6/MAP/01) Supply and fixing in replacement PVC arm of computer chair with new PVC arm (2 Nos) all as per existing size, shape and pattern as shown on drg complete all as specified.

Supply and fixing in replacement of old unservicable cushion with new cushion 40 density, with PVC lipping all around including new hot pressed plywood 12mm complete all as specified and directed. Make: Kurlon or equivalent.

All as per Srl Item No 11.00 here-in-before but for back of chair complete all as specified.

Supply and fixing in replacement of nylon castor wheels complete all as specified.

Supply and fixing in replacement of wheels base of suitable size to chair in complete set with wheels accessories complete all as specified.

Supply and fixing in replacement Gas lift pneumatic system cylinder and accessories complete all as specified.

CHAIR REVOLVING EXECUTIVE (HIGH/ LOW BACK) CHAIR REVOLVING WITH ARMS Removing unserviceable seat, Supply and fixing new seat of 12 mm thick hot pressed plywood upholstered with fabric/leather as required matching with chair pattern & moulded polyurethane foam. The seat foam shall be designed with contour lumber support with PVC lipping all around / as per chair pattern. The cushions shall be of 40 density, thick (as per chair pattern) along with the fabric of approved quality & color. complete all as specified and directed.

All as per serial item No.12.00 here-in-before but for back of chair,complete all as specified and directed.

Removing unserviceable castor wheels, Supply and fixing new castor wheels as per the approved sample complete all as specified and directed.

Removing unserviceable hand rest, Supply and fixing new hand rest matching of the previous shape,size,material & quality complete all as specified and directed.

Removing unserviceable pedestal assembly, Supply and fixing new pedestal assembly all matching the shape,size & quality of the previous, complete all as specified and directed.

Removing unserviceable synchro tilting mechanism & replacing with new synchro tilting mechanism, complete all as specified and directed.

Material and labour servicing the gas lift mechanism & making the seat adjustment functional, complete all as specified and directed.

TABLE COMPUTER (Drg No FD/E6/MAP-03 & TP) Supply and fixing in replacement computer table top made of 18mm thick prelaminated particle board with PVC lipping all around the table complete all as specified and shown on drg.

All as per Srl Item No 13.00 here-in-before but for key board tray, pull out tray fixed with telescopic channels-02 Nos complete all as specified.

All as per Srl Item No 13.00 here-in-before but for drawer, fixed with telescopic channels-02 Nos and knob-01 No complete all as specified.

All as per Srl Item No 13.00 here-in-before but for shelf (horizontal or vertical or bottom), fixed with screws complete all as specified.

TABLE BED SIDE (FD-276 & Similar Drg) Material and labour replacement of existing unserviceable Top of Table bed side with new one made out of 18 mm thick pre laminated particle board exterior grade with decorative choice lamination in one side & balancing white & including providing 4 mm thick teak wood beading all round table top complete all as directed by Engineer in charge.

Material and labour replacement of unserviceable back of Table bed side of 06 mm thick and commercial ply wood size 450x410 mm, complete all as directed by Engineer in charge.

Material and labour for replacement of shelve of Table bed side made out of 12 mm thick BWR plywood with teak veneered surface on top & commercial on other side including 04 mm thick teak wood beading all round to exposed surface of shelves complete all as directed by Engineer in charge.

Material and labour for replacement of unserviceable side of Table bed side of size 510x230 mm made out of pre laminated particle board exterior grade with and including 04 mm thick teak wood beading to all exposed surface all round the sides complete all as directed by Engineer-in-charge.

CHAIR CBA SPL WITH HAND REST (FD -120M) Supply and fixing for Seat made of first class hard wood sheesham well seaoned duly polished with high class french finish canned in Godrej pattern with plastic cane inclduing opening of and removal of old unserviceable seat of chair and to be fixed with tubular frame with & including appropriate size of bolts, nuts and washers complete all as specified and directed by Engr-in-Charge.

Supply and fixing for back seat made of first class hard wood sheesham well seaoned duly polished with high class french finish canned in Godrej pattern with plastic cane inclduing opening of and removal of old unserviceable seat of chair and to be fixed with tubular frame with & including appropriate size of bolts, nuts and washers complete all as specified and directed by Engr-in-Charge.

Supply and fixing of wooden plank of size as shown on drawing with all accessories and complete all as specified and directed by Engr-in-Charge.

Material and labour for preparation of old painted surfaces of steel frame of Chair CBA with spl hand rest, any description not other wise described including removal of rusts/cracks and derusting minor rust and applying one coat (finishing coat) of synthetic enamel paint (olive green) complete all as specified and as directed by Engr-in-Charge.

Material and labour for PVC shoe of approved quality to the leg of Steel chair including Opening of and removal of old unserviceable shoe complete all as specified and directed by Engr-in-Charge

Material and labour for hinges to support of wooden plank and Hand Rest to the chair duly spot welding to chair frame all as specified and directed by Engr-in-Charge.

Material and labour for spot welding at various point to joint the breakage of chair all as specified and directed by Engr-in-Charge.

G S Builders