Loading…
Loading…
Tender Value
₹10.9 L
EMD Value
₹21,800
Closing Date
8 Apr 2025, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
S AND T
9 conditions · 2 needing a document upload
Demand for the Financial Criteria, Association of Railway Officers, List of Arbitration cases, Court cases and Mandate for NEFT are to be uploaded with a scanned copy duly filled in and signed as per annexure no. IV, V, VI, VII, VIII, IX, XI, VIA, VIB, VI and Annexure-V and Annexure-V(A) of GCC-2022 respectively. These Annexures are available in View Document menu at Home page and is downloadable. The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderers are requested to go through the following documents which are available in upload/View Documents in Home page of IREPS portal for works tenders before submitting the e-tender. 1.General Instruction for E-Tenders on works contract--Chapter- I 2.Special Condition-General- Chapter-II
Opening of e-tender : 1. The e-tenders will be opened online using the IREPS portal anytime after tender closing time. No representative is required to be present for opening of e-tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders through the website after the opening of the tender. 2. The tender document cost and earnest money cost is to be paid through online banking facilities through the online portal and by giving the other details online on website www.ireps.gov.in. Note: For more details refer to Cl: 4 & 12 of General Instruction- Chapter-I for Submission of EMD, Cost of Tender Document and opening of e-tender.
Asansol Division: Telecom work in connection with Up-gradation of Sitarampur Freight Sick Line as per vision-2024.
70-SDSTE-ASN-2024-25
70-SDSTE-ASN-2024-25
Open
Works - General
90 Days
Paschim Bardhaman, West Bengal
₹0
₹21,800
8 Apr 2025
13 Mar 2025
46 items across 1 schedule · ₹10,87,540.57 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Excavation of trench in all kinds of soil (1.2 mtr. Depth 300 mm width) and refilling of the trench without Bricks and final back filling, ramming and consolidation of soil as well as the disposal of the soil, if any. Note:Payment will be made as per actual work done on pro-rata basis, if the required depth is not a vailable at site. If the depth of trench is not uniform in a span of 100 mtr. of shorter lengths along the cable run, minimum depth will be taken for that particular stretch for payment. Prior permission should be taken before laying of cable if the depth of trenching is less than 1.0 Mtr. Inspection: Consignee. | Kilometre | 1.00 | 1,09,783.57 | 1,09,783.57 |
| 2 | Supply of PLB-HDPE Duct (with chord) for UG armoured Optical Fiber Cable diameter 40.0 mm, as per RDSO Specification No. RDSO/SPN/TC/45/2013 Revision 2.0 or latest, in length of 1000mtrs/roll. For each K.M. of HDPE duct pipe following items are to be supplied (a) end plugs-02nos., (b) cable sealing plugs-02nos., (c) plastic couplers slip fit/push fit type-02nos., (d) end plugs to be provided along with drum02nos. Western/Gangotri/Narayani Polypipes/Mukand Poly Products /DuraLine India Pvt. Ltd/Similar. Inspection: Consignee. | Kilometre | 1.00 | 66,612 | 66,612 |
| 3 | Laying Of HDPE DUCT 40/33 mm in trenchs and protective works including pulling of single mode armoured OFC Cable( fibre) through duct in trenches as advised by site engineer. Note: (1)Contractor will take over the OFC cable from Railway store to site of work duly checked the continuity of each fiber from end to end (2) before & after cable laying of OFC cable through duct, continuity test from end to end of each fiber to be made by contractor to ensure availability of all fibers duly certified by the site engineer. Inspection: Consignee. | Kilometre | 1.00 | 26,208 | 26,208 |
| 4 | Supply of Optic Fibre Cable 6 Core(Single mode) armoured, as per TEC Spec. TEC/GR/OFC- 02/03.Sep.2003 or latest, Make: FINOLEX CABLES LIMITED/Usha martin/STERLITE TECHNOLOGIES LIMITED/BIRLA CABLE LIMITED/similar, Inspection: Consignee. | Kilometre | 1.00 | 43,704.62 | 43,704.62 |
| 5 | Jointing, terminating and Splicing of 6 Fibre Optical Fibre Cable and fixing of termination Box/FDF/Placing of joint clousers in pit required at various location including tranportation of all the jointing & terminating materials from railway store to the works site and returning leftover materials to the railway store. The rate should include all jointing materials. | Numbers | 6.00 | 2,380.49 | 14,282.94 |
| 6 | Supply of 6U Rack Enclosures Networking/Server Rack for housing of CCTV System, 347 mm height, 550 mm width, 450 mm depth, 1U Horizontal Cable Manager, Power Distribution Units, Hardware Packet, Rack Standard: Conforms to DIN 41494 or equivalent standard, Welded Construction, Front Door: Lockable Toughened Glass Door, Basic Frame: steel, Equipment Mounting: DIN Standard Slots, Mounting Angle: 19" Mounting angles made of formed steel, Standard Finish: Powder Coated, Top and Bottom Cover : Welded to Frame, Vented and Field Cable entry exit cut outs, make: Dlink/similar, Inspection: Consignee. | Numbers | 2.00 | 4,399.64 | 8,799.28 |
| 7 | Supply of RJ-45 Connector, confirming to IS:1293/2005, Input pin Rating (AMP): 6A, Make:- D-Link/Digisol/equivalent. Inspection: Consignee. | Numbers | 50.00 | 6.88 | 344 |
| 8 | Supply of LAN Extender Nomus Gateway e / ES / ER / 2W G.SHDSL bis to support upto @ 5.7Mbps over on 0.5MM copper upto 3.5 Km, make: Nomous/similar, Model: Nomus Gateway e / ES / ER / 2W or similar. Inspection: Consignee. | Numbers | 4.00 | 9,145.8 | 36,583.2 |
| 9 | Supply of Splice Closure for Optical Fiber Cables Armoured and Metal free type OFC With screws sealing as per as per TEC/GR/TX/OJC- 002/03/APR-2010, including all miscellaneous items & consumables for fiber splicing, make: 3M/Comscope/R&M/Drone Edge/similar, Inspection: Consignee. | Numbers | 2.00 | 3,727.73 | 7,455.46 |
| 10 | Supply of Fiber Distribution Management System 6 port, Single Mode, Simplex Fiber Optic Patch Panels, 19 inch 1 U Rack Mountable with SC connector with all accessories , make: Drone Edge/Syrotech/similar, Model: SY-LIU-6F 6 Port, Rack Mount LIU/ DRON EDGE 1224SLD/similar Inspection: Consignee. | Numbers | 2.00 | 8,181.25 | 16,362.5 |
| 11 | Supply of CAT6 U/UTP Cable for Indoor use, 4- pair unshielded twisted pair (UTP) cable, FR PVC Jacket, High Density Polyethylene insulation, 23 AWG solid copper conductor for superior conductivity, Conductor diameter: 0.57 mm (23 AWG), Make -Molex/DLINK/similar. Inspection: Consignee. | Metre | 1220.00 | 19.68 | 24,009.6 |
| 12 | Cutting of platform surface (tile/slab/concrete) for a depth of 20cm & width of 10cm. & refiling / reconditioning/ repairing the platform after laying pipe & cable. Cutting should be done with marble cutting machine in proper manner & restore the same as before in such a manner that asthetic of PF is not disturbed. Inspection: Consignee. | Metre | 50.00 | 351.13 | 17,556.5 |
| 13 | Supply of basic material to construct unit maintenance free earth as per RDSO Specs. No RDSO/SPN/197 Ver.1.0 or latest and conforming to RDSO Drg. No. SDO / RDSO/ E&B/001 or Latest. Necessary testing certificate of UL ,IEC to be produced. It consist of following: (a) Copper bonded steel electrode of 3.0 m long, 17.2 mm dia with copper bonding thickness of minimum macrons and UL listed and marked = 1 no. (b) Earth enhancement material supplied in sealed bags of minimum 10 kg = 3 nos. © Copper strip of 150x25x6 mm, to terminate earth rod = 1 no. (d) Copper strip of 300x25x6 mm (MEEB) = 1 no. (e) Copper strip of 150x25x6mm (SEEB) = 1 no. (ii) Supply of 35 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting main earth electrode to MEEB in the equipment room in duplicate.(minimum 10 meter) (iii) Supply of 16 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting MEEB to SEEB and SPD to MEEB (minimum 10 meter ) (iv) Supply of 10 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting various equipments to SEEB (v) Supply of copper lug sleeve for 3/16 cable Inspection: Consignee | Set | 1.00 | 18,407.27 | 18,407.27 |
| 14 | Installation of Unit Maintenance Free Earth as supplied in above item.It includes ( i ) Digging the earth to the required depth. (ii) Insertion of electrode. (iii) Filling of earth enhancing compound (Approx.30 Kg) (iv) Provision of exothermic weld connections to copper tape of 25 mm x 6 mm x 150 mm to the earth electrodes. All material tools and features required for weld will be arranged by contractor. (v) This also includes CC cover 1.5 ft x 1.5 ft. 1 ft wall thickness 2 inch with cover 3 inch thickness. Cables 35 Sq mm/ 16 Sq mm/10 sq mm for connecting earth to busbar, busbar to busbar and busbars to various equipments. Earth electrode of 17.20 mm dia and 3.00 meter long high tensile low carbon steel circular rods molecularly bonded with copper and outer surface (minimum copper bonding thickness of 250 micrones to made requirement of under writer's laboratories (UL) 467-2007 or latest. Copper strips of 150 mm x 25 mm x 6 mm to be welded with each earth electrode, copper strips of 300 mm x 25 mm x 6 mm for main equip- potential busbar, copper strips of 150 mm x 25 mm x 6 mm sub equip-potential busbar in relay room, power room and panel room. GI strip 25 mm x 2 mm for ring formation of earth pits Earth enhancement material in bags for each Earth Electrode. Inspection chamber of site 300 mm x 300 mm x 300 mm (Inside dimension) of approximate 50 mm thick with pulling hooks to cover the earth pits. Note: The installation of this item shall be carried out by the contractor as per RDSO Specs. No RDSO/SPN/197 Ver.1.0 or latest and conforming to RDSO Drg. No. SDO / RDSO/ E&B/001 or Latest | Set | 1.00 | 6,176.1 | 6,176.1 |
| 15 | Supply of CAT-6 UTP RJ-45 patch cord (3mtr long) twisted stranded cable terminated with RJ45 modular plugs at both the ends. TIA/EIA- 568-C.2 standard, Insulation Material : High Density Polyethylene, Outer Jacket: FR-PVC, Conductor diameter: 24 to 26 AWG, Conductor Metal : Bare Copper, Make: DLink/Similar Inspection: Consignee. | Numbers | 20.00 | 210.82 | 4,216.4 |
| 16 | Supply of 8 Port PoE Fast Ethernet Unmanaged Switch with 2 Uplink Ports, PoE Port: 8 x 100Mbps. Max. 30W Output of Single PoE Port and 2 x 1G Base-T uplink ports, Switching Capacity: 5.6Gbps Full duplex, Network Protoacol: IEEE802.3ab/802.3u/ 802.3x/ 802.3af/ 802.3at, PoE Standard: IEEE802.3af, IEEE802.3at, Power Source: Bult-in Power Supply; Input: 110-264V AC, 50/60Hz, PoE Power Budget: 150W, Make-Dlink/Digisol/similar. Inspection: Consignee. | Numbers | 2.00 | 8,000 | 16,000 |
| 17 | Supply of 12 mm Diameter Wire Fastener Circle Cable Clips with Metal Nail. Set of 100 Nos. make: Hi-plast/Hi tech/similar. Inspection: Consignee. | Set | 1.00 | 292.61 | 292.61 |
| 18 | Supply of 1KVA Online UPS with min. 30 minute back up along with 03Nos. 12v/26Ah external battery (Quanta/Exide/similar) with terminal & all accessories set. Model: Liebert GTXMT+CX1KVA(800W) UPS, Make: Vertive/APC/similar. Inspection: Consignee. | Numbers | 2.00 | 19,894.81 | 39,789.62 |
| 19 | Supply of power distribution unit (PDU) 6AMP - 4, 1.5 Metre cable with Extension, madae of MS- CRCA material, No. of 6 Amp Switches:4, No. of Sockets - 5 Pin 6 Amp:4, ISI Marked switch, Conformity of Switches to IS:3854/1997, MAKE: POWERIDE/Similar, Inspection: Consignee. | Numbers | 4.00 | 1,169.39 | 4,677.56 |
| 20 | Supply & fixing of Round PVC Passive Networking Flexible Pipe, 01- inch Dia, Zig Zag Outer Surface Pattern, Round Shape, with ISI Mark, make: Dutron/TMT Plus/similar Inspection: Consignee. | Metre | 100.00 | 9.11 | 911 |
| 21 | Supply of Media Converter Single Mode, Single Fibre, Wavelength Supported: Tx/RX : 1310/1550 and Tx/RX : 1550/1310, Data Rate: 1000 Mbps, Standard: IEEE 802.3ab 1000Base-T & IEEE802.3z 1000Base-X, Connector Type : Fiber-Single Mode Single Fiber (SC Type), Copper : RJ-45, Automatic identification of MDI/MDI-X cross line, Maximum Cable Distance Coverage: Copper : 100 meters, Fiber : Single Fiber 20km, Power Supply: 5V DC 1A (External Adapter), LED Indication: PWR, Link/Act, FDX, 1000M, 100M, Model: DG-MC6123S-PT/PR 1000Base-T Single Fiber Media Converter/similar, make: Digisol/Mrotek or similar. | Pair | 4.00 | 5,651.68 | 22,606.72 |
| 22 | Supply of LSZH Simplex Fiber Optic Patch Cord SC - LC, 3 mtr long, Fiber type: Single Mode 9/125 micron, Jacket material (Sheath material): LSZH, Cable color: Yellow, Durability: 500 Mating cycle, Material of Ferrule: Zirconia Ceramic, PreRadiused and pre polished, make: Syrotech/Digisol/Molex/similar | Numbers | 20.00 | 597.75 | 11,955 |
| 23 | Supply of simplex SC-SC Patch Chord for OFC (3mtrs length as per ITU-T G657 B recommendation with SC connector, Sheath material: LSZH, Fiber type: Single Mode 9/125 micron, Make: Dlink/Molex/Digisol/AMP/Syntimax/similar. Inspection: Consignee. | Numbers | 10.00 | 119 | 1,190 |
| 24 | Supply of Single Port I/O Box With Frame Plate, No. of ports (RJ 45)-01, Dough Moulding Compound (DMC) material of box, Dust protection for Face Plate, Connector type: Rj45, Minimum size of the box: 75 mm x 75 mm x 50 mm, Thickness of Material: 2.5 mm or higher for DOUGH MOULDING COMPOUND (DMC), with Provision of earthing, Make:- D-Link/Similar. Inspection: Consignee. | Numbers | 20.00 | 298.29 | 5,965.8 |
| 25 | Installation & commissioning of datacom equipments per location as per instruction of site engineer | Job | 1.00 | 5,274.87 | 5,274.87 |
| 26 | Fixing of GI Pipe of required length at all road crossing/track crossing which fall on cable route & laying of telecom cable through them & also on bridge/below mettaled road/L- Xing/culvert/track crossing for laying of cable through it as per instruction of site engineer . | Metre | 100.00 | 102.9 | 10,290 |
| 27 | Boring under Metalled Road/Railway track for crossing of Telecom cables.Boring to be done for crossing road/rail at 1 mtr depth & after boring min. 2" dia G.I pipes are to be inserted & cable to be laid through the pipes. | Metre | 100.00 | 514.47 | 51,447 |
| 28 | Over head laying of 6-core OFC cable along with FOB/Wall/shed structure etc. as per instruction of site engineer. | Metre | 100.00 | 49.41 | 4,941 |
| 29 | Supply of cable route markers as per Drg No.S&T/ASN/Misc. No.22/2001. Inspection: Consignee. | Numbers | 10.00 | 212.7 | 2,127 |
| 30 | Installation of of cable route markers as per Drg No.S&T/ASN/Misc. No.22/2001 as per instruction of site engineer. | Numbers | 10.00 | 91.98 | 919.8 |
| 31 | Excavation of OFC pit for cable jointing of size 1.5m x 1.5m x 1.2 m for all type of soils. The section. Back filling the pit and ramming after jointing. Provision of brick walling the four walls and bottom of pit with RCC slab, back filling with earth and ramming as per drawing. N.B. all the materials including cement required for the above will be supplied by the tenderer. | Numbers | 2.00 | 6,992.21 | 13,984.42 |
| 32 | Supply of flame retardent PVC conduit pipe (lSl Mark), 25mmx1.5mm, This includes all required fixing materials such as screws, nut & bolts, washers,clamps, elbow, Tee, etc make: Anchor/AKG/Precision/Polycab/similar. Inspection: Consignee. | Metre | 1000.00 | 31.95 | 31,950 |
| 33 | Running, Laying of CAT-6 CABLE/power cable/PVC cables through PVC pipe as per site engineer's instruction | Metre | 1000.00 | 4.77 | 4,770 |
| 34 | Supply & installation of High performance Central AP MAC IP Controller. Throughput: 7000Mbps, MAC entry facility upto 250, VLAN tag & untag must be support. Guest captive port must be support, Concurrent connection 1600000, SSL VPN concurrent tunnels 1000, wireless interface 802.11a/b/n/ac (2.4Ghz/5Ghz), Gigabit ethernet port: min.3 nos.-10/100/1000 mbps, 1nos. SFP port, MIMO capabilities 2x2.2, no. of antenna : 2external, all device must be controlled by central location & central device. make: Sophos/similar. Inspection: Consignee. (Bidder should Submit OEM authorization MAF). Inspection: Consignee. | Numbers | 1.00 | 53,318.06 | 53,318.06 |
| 35 | Supply of SFP+ Small form-factor pluggable transceiver, Dual data-rate of 1.25Gbps/1.063Gbps operation, Compatible with SONET OC-24-LR-1, Compatible with RoHS, +3.3V single power supply, model: GORS- BI5312-20DIND/similar, make: Syrotech/similar. Inspection: Consignee. | Numbers | 4.00 | 5,800 | 23,200 |
| 36 | Supply of USB wifi adapter, Wireless Speed up to 300Mbps, IEEE 802.11b/g/n standards, Supports Robust WLAN security (WEP, WPA, WPA2), In-built Soft Access Point & Virtual Wi-Fi, USB2.0 interface, Supports Internal Antenna (2T2R), Status LED, Model: DG-WN3300N (H/W Ver. C1) /similar, make: Digisol/similar. Inspection: Consignee. | Numbers | 30.00 | 1,000 | 30,000 |
| 37 | Supply of 20P PIJF Cable, dia. 0.63mm, as per RDSO Spec. No. IRS-TC-41/97 or latest. Inspection: RDSO | Kilometre | 1.00 | 1,68,032 | 1,68,032 |
| 38 | Laying of Telecom cable including meggering of all laid cable as per instruction of site engineer. | Kilometre | 1.00 | 8,863.5 | 8,863.5 |
| 39 | Supply of cable termination box: 20pairs with all accessories as per IRS TC: 18/75 Ver. 1.0, Inspection: Consignee. | Numbers | 2.00 | 1,028.07 | 2,056.14 |
| 40 | Fixing of CT Box 20 pair on the wall & termination of PIJF cable on it as per instruction of site engineer. | Numbers | 2.00 | 955.42 | 1,910.84 |
| 41 | Supply of ABS Telephone instrument single push button with CLI, Adjustable Handset Volume, 30 Incoming Calls Memory, 5 Outgoing Calls Memory, Real Time Clock with Year, Date & month Display, No.of digits in display: 16, Connecting Cord Length: 1mtr, with Redial facility, model: BEETEL C51/similar, make; Beetel/similar, Inspection: Consignee. | Numbers | 10.00 | 700 | 7,000 |
| 42 | Supply of 8 CHANNEL NVR, IP video input: 8-ch, HDMI output resolution: 4K (3840 x 2160)/30Hz, 2K (2560 x 1440)/60Hz, 1920 x 1080/60Hz, 1600 x 1200/60Hz, 1280 x 1024/60Hz, 1280 x 720/60Hz, 1024 x 768/60Hz, Audio output: 1-ch, RCA (Linear, 1 K), Decoding format: H.265/H.265+/H.264/H.264+/MPEG4, Recording resolution: 8MP/6MP/ 5MP/4MP/3MP/1080p/UXGA/ 720p/VGA/4CIF/DCIF/ 2CIF /CIF/QCIF, Synchronous playback: 8-ch, Capability: 2-ch @ 4K, or 8-ch @ 1080p, 2 SATA interfaces for 2HDDs, Up to 6TB capacity for each HDD, 1 RJ- 45 10/100/1000 Mbps self-adaptive Ethernet interface, Front panel: 1 x USB 2.0; Rear panel: 1 x USB 3.0, Alarm in/out: (4/1), Power supply: 100 to 240 VAC, Make: Hikvision/CP PLUS/Similar, MODEL: DS-7P08NI-K2/similar. Inspection: Consignee. | Numbers | 2.00 | 18,214.88 | 36,429.76 |
| 43 | Supply of 4tb Windows Surveillance Hard Disk, Interface: SATA 6 Gb/s, Workload Rating (TB/year): 180, Cameras supported: 64, Make: To s h i b a / W D / S e a g a t e / s i m i l a r. Inspection: Consignee. | Numbers | 2.00 | 6,500 | 13,000 |
| 44 | Supply & installation of PoE GbE smart managed switch (V2), 24Port 10/100/1000mbps, ethernet port, 4nos. SFP 1GE port, 2 nos. loaded SFP module, Interfaces: 24 x 1000Base-T RJ-45 PoE+, 4 x SFP, 1 x management RJ-45, cloud management facility, IEEE 802.10 Spanning tree protocol, IEEE 802.1w Rapid spanning tree proptocol, (RSTP) IEEE 802.1s multiple spanning tree protocol, Performance Throughput: 41.6 Mpps, Switching capacity: 56 Gbps, voltage Required: AC 120/230 V (50/60 Hz), make; Juniper/HP/Cisco/similar. model: EX3300-24T/HP Aruba 2530-24 G/Cisco C2960-24TS-S/similar. (Bidder should Submit OEM authorization MAF). Inspection: Consignee. | Numbers | 2.00 | 52,787.54 | 1,05,575.08 |
| 45 | Installation of Horn Type loudspeaker at different location as per instruction of site engineer. All required fixing materials to be supplied by contractor. | Numbers | 5.00 | 233.07 | 1,165.35 |
| 46 | Supply of FR 2 core screened/shieled multistrand PVC Insulated cable (24/0.2mm dia) for speaker load line, make:Finolex/Havells/Polycab/similar. Inspection: Consignee. | Metre | 200.00 | 36.98 | 7,396 |
| Schedule total | ₹10,87,540.57 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .