PROVN OF GREASE TRAP FOR MESSES ALOGWITH ASSOCIATED

Amount

Supply and installation of Grease separator plant for underground installation. Grease separator plant should be made of polyethylene for longer life; The grease separator should have nominal capacity not less than 1675 Ltr ; with inlet outlet socket of nominal dia of minimum 150mm with grease storage capacity minimum 285 Ltr , and sludge storage capacity minimum 730 Ltr . Total weight of grease trap should be minimum 111.0kg with overall dimension 1320x2345mm (Dia & Ht). The grease separator should be cleaning via shaft manhole cover emptying via suction line nominal dia min 65mm and nominal pressure with 10kg with coupling for two side thread connection 75/75mm for suction line , fire hose quick coupling 75B and 2 1/2 blank cap and counter flange with fire hose quick coupling 75B and 2 1/2 blank cap. Top cover should be made by concrete frame with cast iron cover having clear opening of minimum 600mm dia . The cover should be odour-free when closed. The cover should be manufactured to meet 105 ton load class requirement, Grease separator plant should gas pipe provision. Complete all as specified and directed by Engr-In-Charge. Note :- (a) The rate shall be included for supply, installation, and provide three day training for oparation, function, cleaning, refixing and transportation (b) Rate includes making good for all damages of exististing services like cable, sewage line, drains etc. Make: ACO: Model: Lipumax PD (Nominal Size: NS 7) or equivalent

Supply and installation of Grease separator plant for underground installation. Grease separator plant should be made of polyethylene for longer life; The grease separator should have nominal capacity not less than 720 Ltrs ; with inlet outlet socket of nominal dia of minimum 100mm with grease storage capacity minimum 270 Ltrs , and sludge storage capacity minimum 245 Ltr . Total weight of grease trap should be minimum 66.0kg with overall dimension 1320x1380mm (Dia & Ht). The grease separator should be cleaning via shaft manhole cover emptying via suction line nominal dia min 65mm and nominal pressure with 10kg with coupling for two side thread connection 75/75mm for suction line , fire hose quick coupling 75B and 2 1/2 blank cap and counter flange with fire hose quick coupling 75B and 2 1/2 blank cap. Top cover should be made by concrete frame with cast iron cover having clear opening of minimum 600mm dia . The cover should be odour-free when closed. The cover should be manufactured to meet 105 ton load class requirement, Grease separator plant should gas pipe provision. Complete all as specified and directed by Engr-In-Charge. Note :- (a) The rate shall be included for supply, installation, and provide three day training for oparation, function, cleaning, refixing and transportation (b) Rate includes making good for all damages of exististing services like cable, sewage line, drains etc. Make: ACO: Model: Lipumax PD (Nominal Size: NS 2) or equivalent

Supply and installation of Grease separator plant for underground installation. Grease separator plant should be made of polyethylene for longer life; The grease separator should have nominal capacity not less than 2170 Ltrs ; with inlet outlet socket of nominal dia of minimum 150mm with grease storage capacity minimum 415 Ltrs , and sludge storage capacity minimum 1005 Ltrs. Total weight of grease trap should be minimum 128.0Kg with overall dimension 1320x1380mm (Dia & Ht). The grease separator should be cleaning via shaft manhole cover emptying via suction line nominal dia min 65mm and nominal pressure with 10kg with coupling for two side thread connection 75/75mm for suction line , fire hose quick coupling 75B and 2 1/2 blank cap and counter flange with fire hose quick coupling 75B and 2 1/2 blank cap. Top cover should be made by concrete frame with cast iron cover having clear opening of minimum 600mm dia . The cover should be odour-free when closed. The cover should be manufactured to meet 105 ton load class requirement, Grease separator plant should gas pipe provision. Complete all as specified and directed by Engr-In-Charge. Note :- (a) The rate shall be included for supply, installation, and provide three day training for oparation, function, cleaning, refixing and transportation (b) Rate includes making good for all damages of exististing services like cable, sewage line, drains etc. Make: ACO: Model: Lipumax PD (Nominal Size: NS 10) or equivalent

Surface Excavation n exc 30 cm deep and averaging 15 cm deep and getting out Hard / dense soil complete all as specified and directed by Engr-In-Charge.

Excavation over area , n exc 1.5m deep and getting out soft loose/hard and Dence soil complete all as specified and directed by Engr-In-Charge.

Excavation over area , exc 1.5m and n.exc 3.0m deep and getting out soft loose/ hard and Dence soil complete all as specified and directed by Engr-In-Charge.

Excavation over area , exc 1.5m and n.exc 3.0m deep and getting out hard rock , complete all as specified and directed by Engr-In-Charge.

M&L for PCC 1:4:8 type D2,(using 40mm graded stone aggregates) as in foundation, filling and mass complete all as specified and directed by Engr-In-Charge.

Cutting into existing manholes for connecting new drains of 150mm bore pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed by Engr-In-Charge.

Excavation in trenches n.exc 1.5m wide and n.exc1.5 m in depth for foundation, or shafts, wells, cess pits manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in any type of soil / rock (soft / hard / dense soil /rock) complete all as specified and directed by Engr-in-charge.

Removing surplus excavated material out side MOD land complete all as specified and directed by Engr-in-Charge.

Returning & filling in including spreading, levelling, watering & well ramming in layers n.exc 25mm thick in soft/ hard / dense soil complete all as specified and directed by Engineer-in-charge.

M & L for concrete bed PCC 1:4:8 Type D2 (Using 40mm graded aggregate) to drain pipes 150 mm dia including packing under and hunching against the sides of pipes after they are laid and tested all as specified and as directed by Engr-in-Charge.

S&F 150mm bore (inner dia) double wall corrugated HDPE pipes (SN8) in any length including all fittings and jointing with elastomeric rubber rings and couplers / other jointing materials as per manufacturers instructions, complete all as specified and directed by Engr-In-Charge.

M&L for Reinforced cement concrete Type B0 1:2:4 (12.5mm graded aggregate) (nominal mix) in Chullah hoods; manhole covers stairways (except spiral staircases) including steps (square orspandril), string pieces, carriages, etc. complete all as specified and directed by Engr-In-Charge.

M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and blinding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-In-Charge.

S& F 110 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches/floors/wall (using GI half round Clamp etc including removing from site complete all as specified and directed by Engr - in- charge.

S&F 110mm bore pipe PVC (SWR) bends any radius with oval access door complete all as specified and directed by Engineer-in-Charge

S& F 75 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches/floors/wall (using GI half round Clamp) etc including removing from site complete all as specified and directed by Engr - in- charge.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-In-Charge.

M&L for glazed ceramic coloured tiles of size 350 x 250 x 7mm/450 x 350 x 7mm thick over and including 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-In-Charge.

M&L for Non skid ceramic coloured tiles (300x300/400x400)x7 mm thick in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in cement mortar 1:6 complete all as specified and directed by Engr-In-Charge.

M&L for Prepolished chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed and in need cement slurry in floor with grey cement and pigment and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in cement mortor 1:6 complete all as specified and directed.

M&L for 16-18mm thick Granite slab (colour Z black or as decided by EIC) on top of cooking platform, bar counter, shelves and similar work including cutting polishing rounding on edge etc machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed by Engr-In-Charge.

Demolition of brick work or stone / boulders masonry built in cement mortar or cement lime mortar incl all quoins, pillars etc but excel ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed by Engr-In-Charge.

M & L for brick work with sub-class `B' bricks old size, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 complete all as specified and directed by Engr-In-Charge.

Taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge

M&L for 15 mm thick rendering in cement mortar 1:4 or fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-In-Charge.

M & L for complete removing existing treatment, old decorated surfaces of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. including cornices, pilasters etc. (Plastered or unplastered surfaces) and applying two coats of exterior plastic emulsion paint (Coloured as directed by EIC), over 2mm thick wall care putty , complete all as per manufacturers instructions and as directed by Engineer-in-Charge.

M&L for preparation of existing treatment new surface of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance 1st quality exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including change of existing colour if required complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5 Sqm but n exc 4 Sqm each, incl removing necessary repair to opening with CM 1:4 complete all as specified and directed by Engr-In-Charge.

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) not exc 1.5 Sqm each ,incl removing necessary repair to opening with CM 1:4 complete all as specified and directed by Engr-In-Charge.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners not paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Complete all as specified and directed by Engr-In-Charge.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed / colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed/ colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; wire gauzed Panelling to be fitted. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly ®.Complete all as specified and directed by Engr-In-Charge.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), 2, 4, and 6 raised panel design calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws. Complete all as specified and directed by Engr-In-Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F in repair for 0.56mm nominal dia wire galvanised mild steel wire cloth and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

S&F for butt hinges of stainless steel 100mm size complete all as specified and directed by Engr-In-Charge.

S&F 150mm Aluminium, anodized, barrel tower bolts extruded section. Complete all as specified and directed by Engr-In-Charge.

S&F 150mm long extruded aluminium alloy anodised handles fabricated type complete all as specified and as directed by the Engineer-in-Charge.

S&F door stopper of aluminium , alloy body and tongue with hard drawn steel spring fixed in floors of 140 mm overall length of cover plate complete all as specified and directed.

S& F Helical door spring 150 mm, ordinary rat tail rod pattern springs including roller and roller plate, fixed including welding/ fixing to steel/ wooden chowkats, complete all as specified and directed by Engr-In-Charge.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-In-Charge.

S&F in repair for sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and waste incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting's union to pipe overall size 915mmx460mmbowl size 410mmx330mmx160mm complete all as per specified and directed by Engr-in-Charge.

Taking up or down 15mm bore steel tubing and connections, including cleaning for removal to store /credit complete all as specified and directed by Engr-in-Charge.

Taking up or down 20mm bore steel tubing and connections, including cleaning for removal to store /credit complete all as spd and directed by Engr-in-Charge.

S&F 15mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as spd and directed by Engr-in-charge.

S&F 20mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as spd and directed by Engr-in-charge.

S&F in repair CP bib taps long body , cast copper alloy, fancy type with crutch or butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15 mm bore complete all as specified and directed by Engr-In-Charge.

S&F in repair CP angle or plain stop valves, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed by Engr-In-Charge.

S&F in repair 15 mm pillar taps swan neck cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered "Hot" or Cold with long screwed shanks and fly nuts screwed for iron pipes and fixed , fancy type complete all as specified and directed by Engr-In-Charge.

S&F in repair 1000 ltrs capacity rotational moulded polyethylene water storage tanks triple layers(cylindrical or vertical with closed top)hoisted and fixed in position all as specified in SSR part I. complete all as specified and directed by Engr-In-Charge.

S&F in repair Gun-metal, globe or gate valves, bore dia of pipe 20mmwith iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-In-Charge.

Supply and fix counter top oval shape any coloured wash hand basin of size 48cmx48cm depth 13cm. Make : Cat part of Jaquar OPS-WHT-15901N or Equivalent in cera, hindware complete all as specified and directed by Engr-In-Charge.

S&F in repair for PVC connection 15mm dia and 600mm long complete all as specified and directed by Engr-In-Charge.

S&F in repair for 10 ltrs capacity PVC valve less symphonic action type flushing cistern low level white inlet ball valve, float , flush pipe and handle including brackets and fixed complete all as specified and directed by Engr-In-Charge.

S&Fin repair vitreous china squatting pan 'Orissa' pattern size 580x440mm with white integral footrest (excluding flushing cistern and flush pipe including making good ) complete all as specified and directed by Engr-In-Charge.

S&F fancy type mirror of 5 to 10 mm thick glossy glass decorative type, any size and shape bevelled edges all-round, wall mounted mirror complete all as specified and directed by Engineer-in-Charge.

Dismantling plain corrugated steel sheeting any gauge thick ness including Nainital and similar pattern complete all as specified and directed.

S&F for 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugated side lap fixed with L or J type or cranked hook bolts complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for. Complete all as specified and directed by Engr-In-Charge.

M & L for 75mm thick PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in plinth protection complete as directed by Engr-in-Charge.

M&L for preparation of old decorated steel surfaces any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on roof complete all as per specified and directed.

M&L for 75 mm thick PCC type D-2, 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and directed.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for 60mm thick, M-30 Grade Machine pressed precast concrete pre-painted interlocking paver block any shape and size casted in plastic moulds and competed on vibratory table confirming to IS 15658-2006 with grey cement and pigment complete all as specified and directed.

M&L for Providing, cement concrete in roof/side kerbs or mud stops, rounded or chamfered on edges making good disturbed surface of ground complete all as specified and directed.

S&F for 18-20mm thick exterior wpc wall cladding (Jalli) sheet of medium density in colour white or as directed by Engr-in-charge with computerized cutting as directed, fixed on MS frame 25mm square tube medium grade,. The size of each panel not exc 1.5sqm. MS frame to be fixed on walls, chajja and fasad with GI fastener 5" long per 1.5 sqm, including all necessary repairing work as reqd, two coat of synthetic enamel paint over one coat of red oxide primer, including weather sealing sealant, masking tape, including cutting of V groves to fixing molded PVC sheet with S/S self-tapping screw complete all as specified and directed by Engineer-in-Charge. Note:-1.Work to be carried out up to four story bldg with MS scaffolding not bamboo. 2. MS frame should be fixed on wall after painting complete all as specified and directed by Engr-In-Charge.

S & F in 'E' board(Design: LACK & hill) : 605x605x4 mm thick, white pre laminated set embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanized iron imposed grid with 24 mm wide T-section exposed flanges which shall be power coated white. The frame work shall be comprise of main runner made from 0.33 mm thick galvanised steel sheet and of size 24 mm X32mmX300 mm board spaced at 120 mm maximum center to center, hangers of GI wire4 mm dia to be fixed by approved rawal plug level and fasteners and screws etc. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall , flushing fitting of 1200 mm longer cross tee(with double stitching) to be interlocked between main runners at 600 mm center to center from 1200X600 mm modules cross tee longer than 600 mm to be supported independently . 600mm long cross tee centrally between the 1200 mm cross tee(with double stitching) to be interlocked between main runners at 600 mm center to center from 1200X600 mm modules cross Tee longer than 600 mm to be supported independently . The perimeter wall angle shall be 0.45 mm thick GS sheet of size 19 mm X 19 mm and 300 mm long of white colour all as per manufacturer's instructions complete all as specified and directed by Engr-In-Charge.

S&F Aluminium grills 10 mm thick along with stainless steel wire mesh as complete, all as specified and directed by Engineer-in-Charge.

M&L for powder coated (minimum thickness of powder coating 50 micron) Anodized aluminum frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer-in-Charge.

S&F for powder coated (minimum thickness of powder coating 50 micron) aluminum anodized three track sliding window with two or more shutter with 5 mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing ,handle lock,etc rubber beading and glazing clips etc using following sections as given in 'JINDAL' catalogue etc as specified as per manufacturer instructions with the size including making good with existing finish, complete all as specified and directed by Engr-In-Charge. Note : (a) Rate included sliding window section, Glass and Wire mesh. (b) Opening will be measured for payment purpose excluding aluminum frame.

Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power) complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with single core of FRLS PVC insulated unsheathed ISI marked 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC conduit size of not less than 20mm including conduit fittings and acessories concealed in wall / ceiling terminated in flush metal box alongwith outer cover plate for mounting modular switch, socket and electronic regulator along with provn of earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded FRLS ISI marked copper conductor of size 1.5 Sq mm cable for Independent bd one 3 pin 15 Amps socket outlet including S/C 1.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire connected to gang box of required size for one light/fan/bell point controlled by one switch.

All as per item No 74 above but for one 3 pin 5 amps socket outlet on indipendent board with other switchs.

All as per item No 74 above but for one 3 pin 5 amps socket outlet on the same board with other switchs.

All as per item No 74 above but with 2.5 Sq mm cable for Independent bd one 3 pin 15 Amps socket outlet including single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire connected to gang box of required size.

S&F switch piano, flush type single pole, one way, 5 Amps, 240 volts all as specified and directed by Engr-In-Charge.

S&F switch piano, flush type single pole, one way, 15 Amps, 240 volts all as specified and directed by Engr-In-Charge.

S&F socket outlet 5 pin 5 Amps all as specified and directed by Engr-In-Charge.

S&F socket 16 Amps, 2 in 1, flush type all as specified and directed by Engr-In-Charge.

Supply and fixing ceiling roses, surface bakelite 65x50mm ,3 terminals 3 phase, PVC/Polycarbonate, isolated body all as specified and directed by Engr-In-Charge.

M & L for submain wiring with two run of 4.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 4.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductordrawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittings all laid/fixed concealed in wall/ceiling, and also include the specified runs of specified size earth continuity conductor of similar type cable complete all as specified - 2 Runs of 4.0 Sqmm single core and one run of 4.0 sqmm single core cable as Earth wire included PVC Conduit shall be measured as one unit length.

S&F of LED ceiling light 34 watt 2x2 recess LED, 6000 K luminaire having glare free symmetrical illumination Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge.

Supply and fixing MCBs 10 KA breaking capacity, single pole, 240 volts, 6 to 40 amps C Curve capacity.

Supply and fixing MCB SPN 40 Amp , 230 volt, 10 KA all as specified and directed by engineer-in-charge.

Supply and fixing in replacement MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting SPN 8 way 230 volts double door type regal gray horizontal type complete all as specified and as directed by Engineer-in-Charge.

Taking down fan, sealing cable end dismantling blades and removing fan and, blades to store. Complete all as specified and as directed by Engineer-in-Charge.

Hanging only ceiling fan (M.D.supply) and connecting up including provision of cable from ceiling rose or connector to fan®. Complete all as specified and as directed by Engineer-in-Charge.

M&L for excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L for 100 mm thick pcc 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and as directed

M&L for use and waste of form work to soffits of suspended slab such as roof slab, floor slab landings and similar work not exceeding 200 mm thick for finish complete all as specified and directed by EIC

M&L for use and waste form work to edges of concrete flats ,treads,breaks in floors window sillssides of rcc slabs exc 10 cm but not exc 20 cm etc rough finished surface of concrete complete all as specified and directed by EIC

M & L RCC 1 : 2 : 4, Type A–1 using 20mm graded aggregates for slabs supported on walls, beams, columns and in shelves, the like all as specified and directed by Engineer - in - Charge .

M & L applying two coat of cement base paint on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in – Charge

M&L Cement concrete 1:2:4 type B-2 using 20mm graded crushed stone aggregate for foundations, fillings and mass concrete all as specified and directed by Engineer – in - Charge.

S& F Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding fixed with self taping screws complete all as specified and directed by Engineer - in – Charge.

S& F Pre painted galvalume aluminium Zinc coating GI based plain steel sheet of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding fixed with self taping screws complete all as specified and directed by Engineer - in – Charge.

M&L for steel work in tubular section, rolled section as columns, posts including welding to plates, angles forming bases for columns and brackets for sheds etc complete all as specified.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Grade Fe 410 -W (Gde-E- 250) quality- A complete, all as specified and directed by Engineer - in - Charge.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly or previously untreated surfaces on steel surfaces. Complete all as specified and directed by Engineer - in – Charge.

M&L for Design, development, supply commissioning & testing EHCC certified ground tubular effective Tripot type chemical earthing system (CPRI tested for 15 KA current capacity for LT line) highly anticorrosive ling life electrode with and including adequate protective coating to withstand severe wear conditions in the earth pit of the standard size comprising of 25mm x 3mtr with suitable connection terminal conforming of IS 3043: 1987 specification, highly conductive packing material to be filed in earth pits for providing uniform, low resistivity anticorrosive, hygroscopic medium around the earth system for improving the efficiency of current suitable cover, material and labour including testing after completion and result should be less than one Ohm complete all as specified and directed by Engr-in-charge.

Matrial and labour for copper strip 20x3mm with saddle and fixing screws and connected as per site requirement complete all as specified and directed by Engr-in-charge.

M & L for shifting of Air conditioner from the AFNET room to new OTM bldg complete all as specified and directed.

M/S MG GROUP

Mahesh Enterprises