Construction of Building for Jigyasha project at AMPRI,Bhopal

Amount

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:

All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in- charge Hard rock (blasting prohibited)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) incuding manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded stone aggregate 20 mm nominal size of Recycled Concrete Aggregate (RCA) upto 20%.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 20% : 3 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto 20%

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 20%: 3 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto 20%)

Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form work for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for :Columns, Pillars, Piers, Abutments, Posts and Struts

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. ----12.42.1 Coupler-----12.42.1.2 110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm

12 mm cement plaster of mix :1:4 (1 cement: 4 sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade(Plastic Paint), having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.and colour. Two or coats.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :610x460 mm bowl depth 200 mm

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of E-IN-C

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe 40 mm dia

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing toilet paper holder :C.P. brass

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.32 mm nominal outer dia Pipes

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Cutting holes up to 30x30cm in walls including making good the same with common burnt clay F.P.S. (non modular) bricks

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, three layer, with cover and float valve etc complete

Structural steel work in providing and fixing MS Grill in windows in position and applying a priming coat of approved steel primer and two coat of oil paint all complete as direction of E-in-C

Supplying and filling moorum/kopra, base of floor/rooad etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by Vibratory roller and watering, levelling etc complete

Brick work with chimny brick of RAVI/KAVI/ SHREE/A D in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and applying multicoat synthetic plaster as per approved design, pattern texture in 2 mm thick on new plastered surface finished in proper line and level as directed by Engineer-in-charge in five coats consisting of composition of four order of application given as under includig all materials, labour and scaffoldings etc. 1) Scrapping of the new surface and applying sealer primer mixed with water in the ratio 1:3 (part sealer primer : 3 part water) and applying by brush @ 0.25 kg/sqm. 2) Applying levelling coat of spectrum rustic fine or equivalent with trwel as a putty finished to generate required texture by trowel. 3) Applying third coat of synthetic plaster with trwel @ 2.5 kg/sqm finished to generate required texture by trwel. 4) Applying two coats of exterior super fine pigmented acrylic wall coating as top coat @ 0.5 kg/sqm in two coats and colours as approved by Engineer-in-charge all up to a height of 10m.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600

Providing and fixing flush doors 30 MM thick ISI mark with decorative lamination 0.75 MM thick on both sides including teakk wood beading on edeges including L-drop SS fiitings 10" & Tower bolts 6" etc complete as per E-in-C

Providing and fixing under cabinet in exiting structuresize approx 0.75x 1.90M (approx)on plan and 0.80 high with dravers of required size of S.S.basket/ drawers/ door with channels and other fittings handles locks, hinges etc. as needed and plyboard and mica on front and balancing laminication on back and fitting of make hettich/ hafle/ blum.The under cabinet of the platform will be made of ply board with mica on top with fitted with hinges including all fittings and fixtures etc. complete.as required as per site requirement and instruction and decision of E-in-c. Line drawings is included and for any query related to this item site visit may be done and E-in-c may be contacted if required.

Labour for shifting of machines,jungle clearance, junk clearance,septic tank & reconnection of tank etc

P/F Glazed Aluminium powder coated section in windows and ventilators including all fittings and fixtures as per E-in-c

Providing and fixing roller blind of approved make design in window of required size in approved pattern and design as directed by E-in-C

Providing and fixing C.P. brass angle valve angular stop valve with wall flange MAKE SOMANY /JAGUAR /Kohler/ Hindustan basin mixer and geyser points of approved quality, 15mm nominal bore including cutting and making good the walls and floors wherever required as per manufacturer instructions and direction of E-in-C (KINDLY REFER TO ORIGINAL EQUIPMENT MANUFACTURER CATLOUGE FOR RESPECTIVE MODLE AND MAKE AS APPROVED BY E-IN-C)

Providing and fixing two way bib cock with wall flange MAKE SOMANY / JAGUAR / Kohler/ Hindustan complete as per instruction of E in C ncluding cutting and making good the walls and floors wherever required as per manufacturer instructions and direction of E-in-C(KINDLY REFER TO ORIGINAL EQUIPMENT MANUFACTURER CATLOUGE FOR RESPECTIVE MODLE AND MAKE AS APPROVED BY E-IN-C)

Providing and fixing SS Square Jali 150 mm sq with trap of make as specified of approved quality as per instruction of E-in-C

Providing and fixing unplasticised PVC moulded fittings / accessories for unplasticised Rigid soil and waste pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10 mm gap for thermal expansion. Bend 45 Degree 110 mm

Providing and fixing unplasticised PVC moulded fittings / accessories for unplasticised Rigid soil and waste pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10 mm gap for thermal expansion. Cowel MR-110 mm

Providing and fixing unplasticised PVC moulded fittings / accessories for unplasticised Rigid soil and waste pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10 mm gap for thermal expansion. P-Trap 110 X 110

Providing and fixing white vitreous water closet with seat and lid,180 MM (490X340X340) WITH SOFT CLOSE SEAT COVER MAKE Kohler/Hindustan/ SOMANY/ JAGUAR, including flush pipe with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required as per manufacturer instructions and direction of E-in-C (KINDLY REFER TO ORIGINAL EQUIPMENT MANUFACTURER CATLOUGE FOR RESPECTIVE MODLE AND MAKE AS APPROVED BY E-IN-C)

Providing and fixing towel rail complete with brackets fixed to cleats with CP brass screws with concealed fittings arrangement of approved quality and colour MAKE Kohler/ Hindustan/ SOMANY/JAGUAR 600 MM LONG as per manufacturer specifications (KINDLY REFER TO ORIGINAL EQUIPMENT MANUFACTURER CATLOUGE FOR RESPECTIVE MODLE AND MAKE AS APPROVED BY E-IN-C)

Providing and laying Glazed Ceramic wall tiles of size 300x600 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing CPVC valve 50mm dia to existing pipeline near water tank

Providing and fixing brass female trade brass FABT to push vale/ other fitting in 32mm dia with all accessries fittings and fixutres complete as per direction and instructon E-in-charge.

Providing and fixing brass male trade brass MABT to push vale/ other fitting in 32mm dia with all accessries fittings and fixutres complete as per direction and instructon E-in-charge.

Providing and fixing CPVC tank nipple 50mm dia to existing water tank in water supply as per instruction and direction E-in-C

Providing and fixing granite in window sill and counter platform and steps/ ramp in CM 1:4 including nosing,grinding,polishing etc complete as per site requirement and direction of E-in C

WOOD DECORATION

PRASANNIKA CONSTRUCTION

MAITRI ENTERPRISES

M/S Arun Agrawal

DK ASSCIATES

M/s FOUR BELLS