ADDN/ALTN TO BLDG NO E-22 (SPORTS MEDICINE CENTRE) OF ARTY CENTRE HYDERABAD UNDER GE GOLCONDA

Amount

Dismantling Mangalore pattern roofing tiles with ceiling tiles or slate roofing complete all as specified and directed

Dismantling battens for tiles, shingles etc of any size including tilting fillets n exc 15 cm centre to centre complete all as specified and directed by Engr-in-Charge.

M & L pre-painted galvalume aluminium zinc coating Profile steel sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.

M&L pre- painted galvalume aluminum zinc coating steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Dismantling timber scantlings 40 Sqcm and over in section in any position in framed work

S & F for Steel work in tubular trusses & vertical post including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade st-240

S & F for MS framed structure roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats of Grade Fe 410 -W (Gde- E- 250) quality- A etc.

M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

Drilling holes round, drill or cut in second class hardwood diameter or side not exc 15 mm dia and complete all as specified and directed by Engineer-In-Charge.

S & F for mild steel screw bolts of 5 to 10 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc. 10 cm. but not exc 15cm complete

Demolition floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and directed.

Demolition of cement concrete (Un-reinforced) in ground floors and pavings n exc. 15cm thick.(Below or above ground level) all as specified and directed.

M&L 75mm thick PCC 1 : 3 :6 Type C2 (using 40mm graded stone aggregate) as in sub base of floors laid in alternative bays including necessary form work complete all as specified and as directed.

M&L for 25mm thick cement concrete (1:2:4) type B0 (12.5mm graded stone aggregate) as in sub-base and finished surface even and smooth without using extra cement, complete all as specified and directed.

M&L for Plain cement concrete C-2 type 1:3:6 (40mm graded aggregate) 75mm thick as in plinth protection all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, laid over and incudling screed bed or bedding layer in CM (1:6), 15mm thick and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles all as specified and directed.

M & L for glazed ceramic tiles in vetical surfaces of size 300mmx450mmx7mm thick laid over 10mm thick back coat in CM (1:4), set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, complete all as specified and directed.

M&L Vitrified Ceramic tiles, light shade, 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm in floors etc., and laid over and including cement screed bed or bedding layout in CM (1:6), 15mm thick and jointed in neat slurry and pointed in white or coloured cement to match using light shade coloured tiles complete, all as specified and directed.

M&L Vitrified Ceramic tiles 10mm thick, light shade, (Square or rectangular) polished, area of each tile not exc 0.36 Sqm in skirting / dados etc and including 10mm thick rendering in CM(1:4) baking coat and jointed in neat slurry and pointed in white or coloured cement to match using light shade coloured tiles complete, all as specified and directed.

Taking down cement plaster any description on brick or stone walls, roof plaster etc including raking out joints,hacking for key, scrubbing down with water, complete all as specified and directed.

M&L for 10mm thick in CM 1:6 rendering on brick or concrete surfaces finished even and smooth (without using extra cement), complete all as specified and directed.

M & L for rendering 15mm thick in cement mortor 1:4 on Brick wall surfaces, finished even and smooth without using extra cement with @ at 3% IWPC (IWPC measured separately) complete all as specified and directed.

M&L for Rendering 5mm thick in CM (1:3) as in ceilings concrete surfaces finished even and smooth (without using extra cement), complete all as specified and directed.

Supply only integral water proofing compound (BIS Marked)

M&L for two coats of oil bound distemper over a coat of alkali resistant primer on newly plastered surfaces of walls including 3mm thick wall care putty on wall and preperation of surface complete all as specified and directed.

M&L for preparing new plastered surfaces of walls and applying Two coats of cement based paint complete all as specified and directed.

M&L for preparation of new ceiling surfaces and applying three coat of white wash, complete all as specified and directed.

M&L for complete removal of existing treatment and applying two oil bound distemper over a coat of alkali resistant primer on old surface of walls including 3mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of cement base paint on walls surfaces complete all as specified and directed.

M & L preparation of old decorated surfaces of walls plastered or unplastered by brooming down or steel wire brushing, scrapping down smoke soots, moulds ,moss and efflorecent salts and treading oil and greasy spots etc and applying one coat of white wash to ceiling surfaces complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed.

M&L brick work with fly ash modular bricks built in CM 1:4 straight or curved on plan exc 6 mtr mean radius complete all as specified and directed.

M & L for half brick wall with fly ash bricks straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Providing reinforced cement concrete TypeB1 1:2:4 ( 20mm graded agg) as in lintels upto 1.5m clear span, shelvs and other similar bands including formwork etc complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per Item No. 37 above but 5mm dia and over upto and incl 10 mm dia in spacers, stirrups and binders complete all as specified and directed.

M&L for 25mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding to edges of stone slabs complete all as specified and directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but n exc 4.00 each complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n exc 2.00 sqm each complete all as specified and directed.

S&F for PVC door frame of standard size and section all as per manufacturer’s instruction complete fixed to brick wall complete all as specified and directed.

S & F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Anodised aluminium powder coating of any colour (thickness of powder coating not less than 50 Micron) frame for door, windows, vantilators with one or more rebates incl joining cleats and other accessories for fixing complete all as specified and directed.

S&F Anodised aluminium powder coating of any colour (thickness of powder coating not less than 50 Micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed

S & F for Anodised aluminium window and ventilator shutters, side hung type without sash bars, luminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F Pre-laminated particle board (12mm thick) Interior grade pre-laminated both side with decorative choice laminations fixed in alluminium door or frame work with screws or necessary fittings complete etc.

S&F Brass mortice lock 4 levers, vertical type size 100 mm complete all as specified and directed.

S&F in repairs double action floor spring hudraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty complete all as specified and directed.

S&F for Figured glass pin headed quality in squre n.exc. 0.5 Sqm in each pane of 4.00mm thick complete all as specified and directed.

S&F 0.63 mm nominal dia of wire ; galvanised mild steel wire cloth and average width of aparture 1.40 mm and fixed with tinned tacks or galvanised wire stapple complete all as specified and directed.

S&F for 100 mm long extruded Aluminium alloy butt hinges and fixed complete all as specified and directed.

S&F for 100mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 150mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 100 mm long alluminium alloy anodized handles fabricated type complete all as specified and directed.

S&F for 150 mm long alluminium alloy anodized handles fabricated type complete all as specified and directed.

S & F in repairs, vitreous china Squatting pan Orissa pattern of size 580mx440mm with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete all as specified and directed.

S&F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete all as specified and directed.

S & F in repairs, plastic water closet seat & cover for pedestal pan , closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

S & F in repair 15mm bore Bib taps, chromium plated cast copper alloy but fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm dia fancy type stop valves/ angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repair 15mm bore dia. pillar taps (fancy type), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete.

S&F in repair bib cock/tap 15 mm chromium plated long body complete (but fancy type) or as specified and directed.'

S & F in repair tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated complete all as specified and directed.

S & F in repair waste coupling bore dia 32mm of PTMT (half or full threaded) for WHB/Sink (Minimum weight 32mm-45gms) complete all as specified and directed.

S & F in repair Waste coupling bore dia 32mm of PTMT (half or full threaded) but suitable for urinals, (Minimum weight 32mm-45gms) complete all as specified and directed.

S&F Steel water tubing, 15mm bore, medium graded, galvanised with all fitings and fixed to wall, celing or laying in trenches including taking up and down old pipe complete all as specified and directed.

S&F Steel water tubing 20mm bore, medium graded, galvanised with all fitings and fixed to wall, celing or laying in trenches including taking up and down old pipe complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back size 550 x 400mm , 01 No. chramium plated piller tap, 01 Nos 32mm waste coupling and pipe, one pair of MS bracket, cutting for and pinning in ends of brackets or erecting stand complete, all as specified and directed.

S & F in repair vitreous china bowl urinal flat back size of 465 x 355 x 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern & flush pipe) but exncluding waste pipe, complete including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement complete all as specified and directed.

S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia all as specified and directed

S & F PVC connections 15 mm size with PTMT nuts of length 600 mm

S & F in repair Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern

S&F in repair PVC ball valve 20 mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plasic ball screwed for iron pipe and fixed . (minimum weight 20 mm- 210 gms )

S&F in repair 20mm bore dia Gun metal Gate valve with iron wheel head screwed both ends for iron pipe or for union, complete all as specified and directed.

S&F in repair 25mm bore dia Gun metal Gate valve with iron wheel head screwed both ends for iron pipe or for union, complete all as specified and directed.

Disconnecting existing tanks of capacity exc 500 ltr & n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc completed all as spd and directed.

S&F 1000 Ltr capacity rotaional moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position all as specified including dismantling & removing to store complete all as specified and directed by Engr-in-charge.

S&F in repairs, stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with wooden beading, and tinned tack or galvanised wire staples or necessary nut & bolt etc., complete all as specified and directed.

S & F for 3 mm thick Sheet glass, ordinary quality and glazing with oil putty or wooden beading etc in squares not exceeding 0.5 Sq. M in each pane including Hacking out old broken glass (any thickness, size quality or description) from wooden, steel or stone, concrete or brick sorrounds, glazed with putty or fixed with beads complete.

Dismantling ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified and directed

Providing and fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum ) False ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture contents less than 2% humidity resistance of 99% NRCO.50 to .75 as pe IS8225:1987, Noncombustible as per BS 476 (Part 4)-1970 and light reflectance of 85% (Minimum) to be laid in true horizontal level suspended on interlocking metal T Grid of hot dipped galvanized iron section of 0.33 mm thick ( galvanised @ 120 gms per sqm including both sides ) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15 x 32 mm of length 600mm to form grid module of size 600 x 600mm, suspened from ceiling using galvaized mild steel items ( galvanizing @ 80 grams per sqm) i..e 50mm long, 8mm outer diameter M-6 dash fastener 6mm dia fully threaded hanger rod upto 1000mm length and L-swhape level adjuster of size 85x25 x 2mm galvanised iron permieter wall angle of size 24 x 24 x 0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm ceneter to centre and 50mm long dry wall wood screws. The kwork shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge.

S & F PVC( SWR ) pipes 110mm dia single socketed , in any lenth with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and directed.

S & F PVC( SWR ) pipes 75mm dia single socketed , in any lenth with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) branch piece single (single Y) equal or unequal with access door of bore 110mm

S&F PVC (SWR) branch piece single (single Y) equal or unequal with access door of bore 75mm

S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 110mm

S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 75mm

S&F PVC (SWR) bends any radius 110mm bore in repairs

S&F PVC (SWR) bends any radius 75mm bore in repairs

S&F PVC(SWR) vent cowl 110mm bore

Dismantling slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed.

M&L chequered cement concrete tiles 25 cm x 25 cm x 25 mm thick with grey cement and pigment, machine pressed, set jointed and pointed in neat cement slurry in floors including 15 mm thick screed bedding layer in CM 1:6 complete all as specified and directed.

M & L for 60mm thick machine pressed precast cement concrete tiles of interlocking pattern with grey cement and pigment rubber moulded with vibration technology set and jointed as per manufactures instructions laying over sand cushioning complete all as specified and as directed by Engr-in-charge. Note : (i) Rate quoted by contractor shall deemed to inclusive of filleting the side of pavement with PCC (1:2:4) type B1. (ii) Sand cushion should be measured & paid separetely.

M & L for sand filling under floors including watering and consolidation complete all as specified.

Taking down carefully existing point wiring of any description for (light, fan ,sockets bells etc) complete including fittings such as sunken boxes, switches, sockets, ceiling rose, lamp holders, brackets ,fittings, pendants, fan regulartors etc and making good the disturbed surface of walls, floors etc. complete all as specified and directed.

Taking down existing sub main wiring /Service wire of any description and size including earth wire, batten, conduits and making good the disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including PVC rigid conduit with all fittings for concealed type on stone / brick, masonary walls, roof etc including new CI/MS sunken box of required size and all as directed by Engineer-in-Charge & 3 mm thick plastic laminated sheet for housing switches sockets, regulators etc. including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified and directed at site .

All as per item No.105 but One 5 pin 5/6 Amps switch socket outlet on independent board complete all as specified and directed

All as per item No.105 but One 5 pin 5/6 Amps switch socket outlet on same board complete all as specified and directed

All as per item No.105 but for One 5 pin 15 / 16 Amps switch socket outlet point on independent board with 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed

M&L switch piano flush type single pole one way 5 Amps complete all as specified and directed at site.

M&L switch socket combination flush type 5 Amps Multipurpose 2 in 1, 3 pin/6 Amp flush type pin with porcelain base complete all as specified and directed at site.

M&L Switch socket combination 2 in 1 flush type universal 3 pin 6 & 16 Amps flush type complete all as specified and directed at site.

M&L lamp holder insulated body with back plate suitable for battern fittings complete all as specified and directed at site.

S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminals complete all as specified and directed at site.

M&L Fan Regulator (Rotary step type, Switch/Socket type Dimmer) 230/240V, AC complete all as specified and directed at site.

S&F 9 W LED bulb of base B22d with color temp 6500K all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

S&F Wall mounted indoor decorative 20W LED 6000K (4 ft.), extruded aluminium batten in anodised finish with opal diffuser, IP20 heat sink provided for efficient heat dissipation and integrated electronic driver, lamp color white complete set including necessary connection with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed at site.

S&F in repair Decorative wall light fixture made up of Polycarbonate, suitable for and including 9 W retrofit LED Lamp B22 base complete all as specified and directed at site.

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as specified and directed at site.

S&F Sheet metal enclosure MCB distribution board including 200 Amps bus-bar single pole and neutral 240V, 8 Ways, double door including taking down of existing sheet metal enclosure complete all as specified and directed at site.

S&F Sheet metal enclosure MCB distribution board including 200 Amps bus-bar single pole and neutral 240V, 4 Ways, double door including taking down of existing sheet metal enclosure complete all as specified and directed at site.

Supply and fix Sheet metal enclosure IP-43 double door for DBs(where MCBs are reqd) TPN 415 V, for 04 ways, complete all as specified.

S&F in repairs factory made prewired TPN 4 ways distribution board (with cable end box) in sheet steel enclouser vertical double door with 200 Amps rated bus-bar,415V suitable for housing TPN MCBs as incomer and SP MCBs as outgoing complete all as specified and as directed at site.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissioning.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of TPN/FP of current carrying capacity 40 to 100 AMP in the DB complete with connection testing and commissioning

S&F in repair MCCB, TP, 415V,Fixed type 25A to 100 Amps 16 KA complete all as specified and as directed.

Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 4 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 4.0 Sqmm as earth lead in and including PVC conduit medium grade with all fittings suitable for concealed type and making good the disturbed wall surfaces to match with existing specification all as required at site complete with all as specified and directed.

All as per item No.129 above but Sub main wiring using four runs of 6.0 sqmm wire with two runs of 4.0 sqmm earth wire complete all as specified and directed at site.

S&F in repair bracket suitable for fixing of building security light fitting made out from 40 mm bore GI pipe, medium grade 2 metre in length, made to shape as required, fixed to pole with MS flat iron clamp of size 25x4mm duly welded, bent to shape and making holes etc complete including necessary nuts, bolts & washer etc as required and all as specified and directed.

Taking down Ceiling fan, sealing cable end, dismantling blades and removing fan and blades and refixing ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed at site.

M&L fabricated of iron bands,straps,supports or stays for rain water ,ventilating pipes including bolts if required hooks(stay) heavy for large gates ,hook and pintle hinges,large hasps and staples ,chains,hand made slidings bolts clamps hold fasts,wall ties hook for hanging fans,plain angles cleats for securing purlins to wood trusses or rafters ,knee piece inserts two way and three way straps plate washers and similar small articles conforming to Fe 290 Gde E-165, including clamps nuts,bold,fixing and old one complete all as specified and directed at site.

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead complete all as specified and directed

RAFEEQ AND CO

harshraj and co

STANDARD AGENCIES

Sri Lakshmi Enterprises