PROVISION OF 01 X TOILET WITH 04 X URINAL POT ALONGWITH SEPTIC TANK, PROVISION OF FLOOR TILING AND FALSE CEILING TO BUILDING NO P.45 AND CERTAIN REVENUE WORKS AT ALGARAH UNDER GE 867 EWS

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for foundation etc. and getting out in Sof t/ loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for foundation etc. and getting out in Hard / dense soil complete all as specified and directed.

M & L PCC (1:4:8) type D-2 (Using 40 mm grade aggregate) in foundation, filling and mass concrete complete all as specified and directed.

M & L PCC (1:4:8) type C-2 (Using 40 mm grade aggregate) in foundation, filling and mass concrete complete all as specified and directed.

M&L for Precast cement cncrete Type C-1, (1:3:6) (20mm graded aggregate) block masonry with factory made solid blocks exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed.

M & L for Damp Proof Course in cement mortar (1:2) 20 mm thick with using water proofing compound 3% by weight of cement including necessary formwork complete all as specified and directed.

Returning filling in , including, spreading, levelling, watering and well ramming in layers not exc 25cm in soft / loose soil complete all as specified and directed.

Removing excavated material n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point in soils complete all as specified and directed.

M & L RCC type B-1 (1:2:4) (20mm graded stone aggt) for lintels over 1.50 span complete all as specified and directed.

M & L RCC, (nominal mix) type B-1, (1:2:4) (20mm graded stone aggt) in slabs sopported on walls, beams and colmns in floors, roofs landings balconies, canopies, deck slabsand in shelves and similar works etc all as directed by EIC.

M & L form work to sides and soffits of floor or floor beams, lintels, shelves including supports, over hangs etc also splays between floor and beams etc in rough finished surfaces of concrete in flat complete all as specified and directed.

M & L mild steel TMT Bars10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (ann ealed not less that 0.90 mm dia or securing with chip) complete all as specified and directed.

All as per item No.13 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L Hardcore of broken stones gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L 100 mm thick PCC type D-2 (1:4:8) (using 40mm graded stone agg) in sub base of floor complete all as specified and directed.

M & L 75 mm thick PCC type D-2 (1:4:8) (using 40mm graded stone agg) in sub base of floor complete all as specified and directed.

M & L 75mm thick PCC type C-2 (1:3:6) (40mm graded stone aggt) for plinth protection,path/steps etc to be finished fair and even complete all as specified and directed.

M & L 75mm thick PCC type C-1 (1:3:6) (20mm graded stone aggt) for plinth protection,path/steps etc to be finished fair and even complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.

M & L 15mm thick rendering on fair faces of brick work concrete surface in CM (1:6) complete all as specified and directed.

M & L 15mm thick rendering on fair faces of brick work concrete surface in CM (1:4) with water proofing compound complete all as specified and directed.(Note : Water proofing compound will be measured and paid separately)

M & L three coats of white wash on newly plastered surfaces including preparation of surfaces complete all as specified and directed.

M&L for preparation on newly plastered / previously untreated surfaces of wall and applying two coats of cement base paint over one coat of priming coat with alkali resistant primer complete all as specified and directed.

Supply only integral water proofing compound

S&F Steel work in tubular trusses as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. Made in Fe 410 -W (Gde- E- 250) quality- A (cut to ordinary lengths i.e. within 20mm of the length indicated)

M & L for Pre-painted galvatume aluminum zince coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering /cladding to wall , fixed with self tapping screws all as specifed.

S & F steel ventilator with top hung shutter, including hinges, steel peg stay etc. complete all as specified and directed.

S & F 3.0 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5Sqm in each pin complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces steel and iron surfaces with two coat of synthetic enamel paint over a coat of priming coat of Red oxide of any description, over 10cm width or girth not other wise described complete all as specified and directed.

Preparation of new painted steel and iron surfaces of any description and in any position over 10 cm width or girth as in roof not other wise specially described and applying one coat of Ist grade enamel paint over a coate of red oxide primer zinc chrome all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L glazed ceramic coloured tiles (300 x 200mm) x 7mm thick on vertical surfaces such as skirting , dados & risers to steps set & Jointed in neat cement slurry & pointed in colored cement to match over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

Solid PVC door frame of size 50mm x 47 mm, made out of 5mm plain colour PVC sheet, reinforced with MS square tube supplying and fixing in openings complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification complete all as specified and directed.

S&F 100 mm but hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified and directed.

S & F 150 mm long aluminium anodised barrel tower bolts of extruded sections complete all as specified and directed.

S & F 125 mm long aluminium handle cost type anodised complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) with seat cover, white (excluding fixing bolts, flushing cistern and flush pipe all as spfd.

S&F PVC valveless, syphonic action type flushing cistern 10 ltrs capacity low level, with inlet, ball valve float, flush pipe and handle including brackets complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F for Vitreous china wash basin, white, flat back, size 550mm x 400mm including cutting for and pinning in ends of brackets and waste pipe complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F viterous china Urinal half stall type (white) including fixing plug, flush pipe, brackets, flush pipe etc, fixed to walls complete all as specified.

M&L for Marble (table rubbed and polished ) Makarana white 25mm as in urinal partitions etc., fixed in walls set in cement mortar (1:3) complete all as specified and directed.

S & F bib taps cast copper alloy chromium plated fancy type screwed down, screwed for iron pipe or for brass ferrule & fixed 15mm bore complete all as specified and directed.

S & F Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm single socketed in any length with rubberring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC bends any radius 110 mm dia complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm single socketed in any length with rubberring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC bends any radius 75 mm dia complete all as specified and directed.

S&F 110mmbore PVC (SWR) vent cowl complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed.

M&L for Cement concrete (1:4:8) type D2 (Using 40mm graded stone agg) as in Concrete bed to 100mm drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S&F 15mm bore unplasticised PVC pipes of pressure rating 10Kgf/Sqcm fixed complete to walls, ceilingor in floors etc, any types of pipe complete all as specified and directed.

S&F 20mm bore unplasticised PVC pipes of pressure rating 10Kgf/Sqcm fixed complete to walls, ceilingor in floors etc, any types of pipe complete all as specified and directed.

Excavating over areas, exc1.5 m deep and n exc 3 mtr getting out in soft/ loose soil.

M&L PCC (1:5:10), Type E-2 (Using 40 mm Grade aggregate) in foundation, filling and mass concrete complete all as specified and directed.

M&L Providing precast cement concrete solid building blocks or slabs of type C-1, (1:3:6) (using 20mm graded stone aggregate) 10cm thick (with plain or interlocking joints as directed) setting in CM (1:6), complete, in walls complete all as specified and directed.

M&L 40mm thick PCC type B-1, (1:2:4) (using 20mm graded stone aggrigate) as in flooring finished even and smooth with using extra cement complete all as specified and directed.

M&L setting coat 3mm thick, trowelled to even and smooth finish in cement plaster (1:2) complete all as specified and directed.

M&L form work to soffits of suspended slabs such as roof slabs, landings and similar works, not exc 200mm thick (Horizontal) in rough finished surface of concrete complete all as specified and directed.

M&L Form work to edges of concrete flates in roof and sides of RCC/PCC bands in walls, horizontal or sloping and similar works exc 5.00 cm but n exc 10cm wide in rough finished surfaces of concrete complete all as specified and directed.

M&L RCC type B-1, (1:2:4) (20mm graded stone aggregate) slabs Supports on wall complete all as specified and directed.

M&L precast cement concrete type B-1, (1:2:4) (20mm graded stone aggregate) in landing cover slabs and similar articles and set in CM (1:6) complete all as specified and directed.

S&F 150mm dia salt glazed stone ware drain pipes laid in trenches and jointed as specified.

S&F 150mm bore SGSW bents and taper bends complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation.

M&L brick work with sub class 'B' Brick straight or curved on plan with mean radius n.exc 6mtr built in CM (1:6) complete all as specified and directed.

M&L Brick work with sub class 'B' Brick in one brick thickhoney comb walling built in CM (1:6) complete all as specified and directed.

M&L loose filling with broken bricks with aggregates of gauge 80 to 150mm in soakage pits, sokage wells complete all as specified and directed.

M&L broken stone or bounders hardcore of gauge n exc. 63 mm , deposited, spread and levelled in layers n exc. 15 cm thick , watered and rammed to a floor/true surface complete all as specified and directed.

M&L 40mm thick PCC type B-1, (1:2:4) (using 20mm graded stone agg) as in floor complete all as specified and as directed.

M&L 38mm wide glass dividing strips 3mm thick as in floors.

S&F roof trusses, framed trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (Beam, tee, angle channel or flat section) incl distance pieces, cleats, nut and bolts conforming to FE-410w (grade 250-E quality A) complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F framed work as in door or gates of angle or other section with gusswt plates, rails, braces,etc. complete drilled for fixingof steel sheeting or other covering Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete conforming to Fe-410W9Gde E-250) quality- B complete all as specified and directed.

M&L for 1.6mm thick MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.

Supply only 375 mm long MS sliding door bolts, bolt type, stove enamelled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

Supply only 150 mm size MS Pressed handle, oval type, stove enamelled black and fixed complete all as specified and directed.

S & F steel windows for glazed with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engineer-in-charge.

S&F steel ventilator with top hung shutter fixed type including hinges, steel peg stay, complete complete all as specified and directed.

S & F Framed work such as grills framed guard bars etc confiring to Ge 290 , 10 mm sq bar for guard bars complete all as specified and directed.

M & L 3mm thick sheet glass , ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

Forming construction joint (dummy) joints 65mm deepx 10mm wide filled with sealing compound grade A complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

Excavation over area in soft/loose soil not exc 1.5 mtr depth; for foundation etc. and getting out all as specified and directed.

M & L PCC (1:3:6), type C2, using 40 mm graded stone aggregate as in foundation, filling and mass concrete all as specified and as directed.

M&L for MS TMT bars 8mm dia cut to length, bent to shape, incl cranking and binding complete all as spcified and directed.

M & L cement concrete type CI (1:3:6) using 20 mm graded stone aggregate in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets andrailings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided , watertroughs and the like including weathering, slightly rounded or chamfered angles and throating all as specified and as directed.

M & L rised pointing to block masonry surfaces in cement mortar (1:4) all as specified and as directed.

Supply only 75mm bore PVC pipe (SWR) single socketed, in any length with rubber ring joints, as in weep holes complete all as specified and directed.

M&L for hand picking (any thickness) at the back of walls and raising (or lowering) to the required level using pabbles or broken stone complete all as specifid and directed.

S& F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S&F Thickness of PVC insulation panels 10mm with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of G.I complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) Type D2 (using 40mm graded aggregate) as in sub base complete all as specified and directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in cm (1:6) in flooring complete all as specified and directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surfaces such as dado / skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 10mm thick backing coat in cm (1:3) complete all as specified and directed.

S&F Air termination , single pointed aluminium rod 12mm dia 300mm long complete all as specified and as directed.

S&F aluminium strip 25x3.15 mm thick saddle/mounted on porcelain insulator / laid in trench complete all as specified and as directed.

M & L for GI tubing light grade 40 mm bore complete with all fittings like flange/clamp/nuts/GI wire & bolts etc on roof top of required lenth for fixing lightining conductors complete all as specified and as directed.

S&F Porcelain earting GI strip insulator for Lightenig Arrester installation complete all as specified and directed.

Supply and fixing test point terminal block made of gun metal or phosphorus bronze 75 x 75 x 25mm drilled and screwed including 03 nos dia 25mm long hex head screw all as specified and directed

Supply and Laying service cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor on wall with the help of shadel of size 10 Sqmm 2 core as required at site.

M & L GI tube light grade for passing through cables under the floor ,along the wall or along the pole of 25 mm bore and fixed to the poles/walls with suitable size of MS clamps and nut and botls/washers etc, complete all as specified.

M&L for sand cushioning to U/G cable in layers of 23cm thick( 8 Cm before laying the cable and 15Cm thick after laying the cable) in trenches complete all as specified and directed. Note :- Only Puned layers shall be measured.

Supply and laying reinforced precast concrete cable cover, class LV, type 1, flat, size 250mmx150mmx40mm complete.

S&F GI tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc. ) laid in trenches, on ground, on walls, under floors etc. of 20 mm bore complete all as specified and as directed.

S&F gun metal, globe or gate valves of 20 mm bore dia, with iron wheel head, screwed both ends for iron pipes and fixed.

S&F Rotational moulded polythene water storage tank (cylindrical vertical with closed tops ) hoisted and fixed in position of 1000 Ltr capacity, all as specified and as directed.

Rendering cement plaster 10 mm thick on fair surfaces of brick in CM (1:6) and all as directed.

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit not less than 20mm size, medium grade with all necessary fittings, concealed wiring , for light / E/fan/Bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes (concealed type in permanent bldg and surface in temporary bldg or as directed ) for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion.

Supply and fix switch piano flush button, single pole, 5 amps, one way all as specified and as directed.

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed.

S & F Energy efficient LED tube light fitting 4", 1x18 watt, with bipin holders, connector block, CCT - 6500K, system output lumen not less than 1800lm, aluminium housing, surge protection range 3KV including connecting up with PVC insulated 3 core sheathed 0.5 sqmm copper conductor two numbers PVC mounting blocks for fixing of fitting complete all as specified and as directed by Engineer-in-charge.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Model –WT202W LED 6S CW PSU S2 PC of Philips or equivalent model of Havells/ Crompton.

Supply and fixing lamp holder insulated body with back plate for batten fitting all as specified and as directed.

S & F in LED lamp B-22 10 W poly carbonate body 3 Star.(Cat part No LED ADORE 10W B22 CDL 3 STAR of Havells )

Supply and Fixing exhaust fan, made of sturdy engineering plastic complete with louvers shutter, 230V,50 HZ, RPM 1200, copper winding of sweep 250mm as specified and as directed by Engineer-in-charge.

Supply and fixing Sheet metal enclouser single door for MCB DB,s Phosphatised Powder Painted without bus bar, Single pole and neutral link of 2 way 240 Volts AC all as specified and directed.

Supply and fix MCB, Single Pole & Neutral (SPN), 32 Amps, 240V, 10KA 'C' curve, 50 Hz, complete all as specified and directed by Engr-in-Charge.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25 m deep bellow ground level) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed, including funnel with GI med grade watering pipe 20 mm bore , wire mesh, charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC (1:3 :6) type C-1 , 50 mm thick pre cast RCC (1:2:4) type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and as directed.

S K ENTERPRISES

GEETA CONSTRUCTION

C. M. AGARWAL AND CO

SANJAY SAW MILL

MANOJ JINDAL

JAYSHREE CONCERN