M.L.Thiruvalluvar Drydocking work

Beaching, hauling up, hauling down, docking, and undocking operations—including dock hire and mooring charges—shall be carried out as required for the complete repair of the vessel. Docking shall be performed at a minimum height of 1 meter to facilitate underwater inspection and to carry out necessary works for keel plates. Quantity Docking /Undocking plus yard Rent along with EB charges

High pressure water washing and Sand blasting of the keel plate, hull plating, shell plating, and Main deck plate, top deck plate to marine growth and rust. Quantity Sand blasting area: The total area includes bulwark plating, side plating, aft plating, main deck, upper deck, monkey island, keel plating

Ultrasonic testing shall be conducted on the top deck plating, main deck plating, hull plating, keel plating, bulwark plate and underwater hull for measuring thickness. Quantity UT Gauge-800 points

Cropping and renewal of keel plates, side hull plates, web frames, brackets, angle frames, main deck plating, bulwark plates, and top deck plates, anchor winch foundation plate shall be carried out as specified in the gauging report. All replacement plates should be certified by the approved classification society. All welded plates shall be subjected to dye penetration testing and water integrity verification to ensure compliance with quality standards. The payment will be paid for actual renewal of steel. Welding works to be done by the class certified welders. The cost includes testing, class certificate, transport and labour. The all scrap material should be return to KFS work shop, Kanniyakumari. Quantity 7.00 Tonnes (appx), plate thickness as per drawing

Metal Steel fenders along ship side to be replaced Quantity Material and labour cost

Labour cost for Chipping, scrapping, wire brushing, cleaning, and painting shall be carried out on the vessel from keel to waterline. The area shall be coated with one layer of anticorrosive primer followed by three coats of marine-quality paint, and a coat of antifouling paint in accordance with the approved painting scheme// All other areas, including ballast tanks, shall be painted with one coat of primer and two coats of marine-quality paint.// Fuel oil tanks to be gas freed, cleaned of sludge and painted with bituminous paint as required//All access ladders need to be chipped and painting as per requirement.//All engine room bilges, engine room compartment, generator compartment all the remaining compartments to be cleaned, chipped and painted with two coats. (The paints //red oxide, black, white, dark green, antifouling, dark blue, post office red, thinner will be supplied by PSC at PSC stores, Kanniyakumari. The Balance paint should be returned to PSC stores.) Quantity Labour cost only. Total area including bulwark plating, side plating, keel plating, aft plating, engine room walls, engine room chequered plates, main deck, upper deck, monkey island, funnel, deck cover plating, ladder, stairways, emergency exits, hand railings, VIP cabin.

Sea chest, suction and discharge valves, mud boxes, strainers, main and distribution valves, and pipelines shall be inspected and cleaned using chemical washing as required. Corroded anodes along the ship sides shall be replaced. Quantity 16 Piece Anode+ 7 valves material and labour cost

All AC/DC lights, fans, switches, panels, wiring, sound systems, engine gear operating lever, window locks, seat belt mechanisms, P.A. system and shore panels located in the engine room, deck, wheelhouse, VIP cabin, Electric horn, passenger cabin, pump house, store, and crew cabins shall be inspected. Plumbing works in toilets and wherever necessary Any defects identified shall be rectified or replaced. Quantity for Materials and labour cost

Life raft to be serviced, tested by the approved authority. Quantity As per drawing

Anchor chains to be ranged, sand blasted, marked and painted. Anchor winch operating mechanism needs to be tested, the same need to be repaired/renewed if necessary. Quantity Overhauling of the anchor winch mechanisms. Length Extension of anchor ropes.