C/o/Additional/Renovation FRH Baddi of Baddi Forest Range of Nalagarh Forest Division (H.P.)

Amount

Dismantling brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Dismantling R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. RCC

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations,footings,bases of columns etc. and mass concrete.

Columns,pillars,posts and struts.(i) Square, rectangular, polygonal in plan.

Beams, cantilivers, girders and lintels Sides and Soffits of beams, beam haunchings, contiliver girders, bressumers and lintels not exceeding 1 Metre in depth:

Flat surfaces such as soffits of suspended floors,roofs landing and the like: Floors etc. upto 200 mm in thickness:

CEMENT CONCRETE WORK Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand) : 3 graded stone aggregate 20 mm nominal size) G/F fo : foundation up to P/L

Lintels, beams girders bressumers and cantilevers :

Column, pillars, posts and struts :

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)

BRICK WORK Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. Second class teak wood. 35 mm thick shutters

WOOD WORK Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wo

Providing fixing bright finished brass tower bolts (barrel type) with screws etc. complete 200x10 mm.200x10 mm

Providing fixing bright finished brass tower bolts (barrel type) with screws etc. complete 150x10 mm

Providing and fixing bright finished brass handles with screws etc. complete. 125mm

Providing fixing bright finished brass tower bolts (barrel type) with screws etc. complete 100 mm,

Providing and fixing 150 mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete

Providing and fixing bright finished hand drawn hooks and eyes. (a) 200x10mm

PAVEMENT AND FLOORING Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) : Light shade pigment using white cement

MISCELLANEOUS Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

STEEL WORK Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more.

PAINTING AND POLISHING Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture

Applying priming coat over new wood With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface ven and smooth complete.

Finishing wall Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade.

PLASTERING, DISTEMPERING & OTHER FINISHINGS 6mm Cement plaster to ceiling (b) In Cement Mortar 1:4 (1Cement:4 Sand)

15 mm cement plaster of mix :interior plastering 1:6 (1 cement: 6 fine sand)

15 mm cement plaster of mix :exterior plastering 1:6 (1 cement: 6 fine sand)

SANITARY INSTALLATION Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass nserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge. 1216 (16 mm O.D. pipe)

Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Equal Tee For 15.88 mm outer dia pipe

Equal Tee For 22.22 mm outer dia pipe

Reducing Tee. For 22.22 mm x 15.88 mm outer dia pipe

Female branch Tee. For 15.88 mm outer dia x15 mm nominal dia threaded

Female branch For 22.22 mm outer dia x 15 mm nominal dia threaded

Female Thread Connector/ Adapter:- For 15.88 mm outer dia x15 mm nominal dia threaded

Female Thread Connector/ Adapter:For 22.22 mm outer dia x 15 mm nominal dia threaded

Male Thread Connector/ Adapter:- For 15.88 mm outer dia x15 mm nominal dia threaded

Male Thread Connector/ Adapter:- For 22.22 mm outer dia x15 mm nominal dia threaded

Couplers:- 1216 (16 mm OD) pipe

Couplers:1620 (20 mm OD ) pipe

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete.

Fixing water meter stop-cock in galvanised mild steel tube including necessary fittings such as mild steel galvanised jam nut, sockets, etc. cutting and making long screws complete (water metre and stop-cock to be measured and paid for separately) (i) 25 mm nominal bore

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including W.C. pan with ISI marked white solid plastic seat and lid flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :

Providing and fixing in position brass mosquito proof coupling for over flow pipe of 25 mm nominal dia (over flow pipe to be measured and paid for separately).

Providing and fixing Inletconnection for flash pipe with WC Pan.

Providing and fixing plastic sheet solid hollow type and cover for wash down water closed with CP Brass and rubber buffer.

Providing and fixing wash basen withj CI Brackets 15mm C.P. brass pillar taps,32mm CP Brass waste of std patten encls painting of fitting and bracket cutting and making good s the walls as required: white vitereous china washbasen size 630x450mm with the pair of 15mm CP Brass Piller type

Providing and fixing vitereous china pedestal for basin complete recessed at the back for the rescption of pipes and fitting.

Providing and fixing stainless steel kitchen sink of approved ISI make with drain board and C.P. waste with CL of MS bracket painted white including holes and making good the same but excluding fitting (i)610x510mm with bowl depth 200mm

providing and fixing CP Brass chain and rubber plug complete for sink or wash basin. (i) 32 mm dia.

Providing and fixing rubber plug for sink /wash basin : (i) 32 mm dia.

Providing and fixing C.P. Brass waste for wash basin or sink :- (i) 32 mm dia.

Providing and fixing M.I. Union for wash basin or sink :- (i) 32 mm dia.

Providing and fixing C.P. Bottle Trap for wash basin and sink :- (i) 32 mm dia.

Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahni trap.

Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior glass mounted on 6 mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Long pattern W.C Pan of size 580x440 mm

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc.,complete.

Providing and fixing Toilet paper holder. (a) C.P Brass

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing C.P. Brass shower rose with 15mm or 20mm inlet :- (i) 100 mm dia

Providing and fixing C.P. Brass Pillar tap (i) 15 mm dia

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75 mm

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 110 mm dia.

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100 mm

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 110mm Dia

Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x75 mm

HARKIT SINGH

RISHABH THAKUR