Provn of A Veh Sheds for parking of A Vehs at Mil Stn Beas under GE Kapurthala.

Amount

M&L for Excavation in renches, n.exc. 1.5m wide and n.exc. 1.5m in depth, for foundation, etc or shofts, wells, cesspit, manholes, oier holes, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out complete all as specified and as directed by Engr-in-charge.

M&L for Cement Concrete in foundations, filling and mass concrete in Sub Base , PCC (1:4:8) 40 mm graded stone aggregate complete all as specified and as directed by Engr-in-charge.

M&L for Form work to side of concrete foundations, footings, bases of columns, raft and raft beams, side and soffit (if any) of foundation and plinth beams and similar works, vertical or batter complete all as specified and as directed by Engr-in-charge.

M&L for Design Mix M-25 for foundations, including raft, footings,col, foundation beams, plinth beams, bases for columns etc, basement slabs and mass concrete complete all as specified and as directed by Engr-in-charge.

M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm complete all as specified and as directed by Engr-in-charge.

M&L for Removing excavted soils material n.exc. 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed by Engr-in-charge.

M&L for TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-charge.

M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including hooking end and binding with and including mild steel wire(annealed) not less than 0.90mm dia or securing complete all as specified and as directed by Engr-in-charge.

S&F Frame work of Roof trusses (framed), trussed, perlines, col, post, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, round MS pipe, gusset plate or flat section and making neccesy welding & hole for bolting of frame work and flat sections) including distance pieces, cleats etc and similar works of (Fe-410W(Gde-E-250) quality-A) complete all as specified and as directed by Engr-in-charge.

S&F Mild steel screw bolts dia of neck 11 to 15mm (machine made) with purpose made, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexazonal or square nut, exc 5cm but n.exc 10cm long complete all as specified and as directed by Engr-in-charge.

S&F Mild steel screw bolts dia of neck 11 to 15mm (machine made) with purpose made, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexazonal or square nut, exc 15cm but n.exc 22.50cm long complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new steel surfaces and applying Two coats of synthetic enamel paint over a coat of red oride primer complete all as specified and as directed by Engr-in-charge.

S&F Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge.

S&F Pre-Painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge.

M&L for Brick work with Sub class `B` bricks, straight or curved on plain exc 6m mean radius, built in CM (1:6) complete all as specified and as directed by Engr-in-charge.

M&L for Cement Concrete , Type C1, (1:3:6), (20mm graded stone aggregate), in roof kerbs rounded or chamfered on edges in lintels upto 1.5m clear span, cill,steps and other similar bands, plinth courses, copings, kneeders, and kerb iand similar works including weathering, slightly rounded or chamfered angle and throating complete all as specified and as directed by Engr-in-charge.

M&L for rendering 15mm thick on fair faces of Brickwork or concrete surfaces, with CM (1:6), rendering to be finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new plaster surfaces and applying two coats Cement Base Paint over a coat of chalk whiting primer on plaster surfaces complete all as specified and as directed by Engr-in-charge.

M&L for Hardcore of Broken Stone or boulders, gauge n.exc 63mm, deposited spread and levelled in layer n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified and as directed by Engr-in-charge.

M&L for Stone set flooring with stone setts of Size 200 to 250mm long,150 to 200mm wide and 150mm deep and sides dressed, bedded in cement mortar 1:3, joint 20mm thick, grouted in cement mortar 1:2 with an admixture of metalic floor hardner, 5% by weight of cement and struck flush complete all as specified and as directed by Engr-in-charge.

M&L for Stone Sett Edges stones to flooring with stone setts of size 250 to 300mm long x 150 to 200mm wide and 450mm deep and sodes dressed, bedded in cement mortar 1:3, joint 20mm thick, groutig in cement morta 1:2 with an admixtur of metalic floor hardner, 5% by weight of cement and struck flush complete all as specified and as directed by Engr-in-charge.

G M BUILDERS 36

DUGGAL CONSTRUCTION CO