CERTAIN REPAIRS TO JOINERY, ROOFING, FLOORING, FALSE CEILING, SANITARY FITTINGS AND OTHER WKS AT JCOs/OR MD ACCN OF PIARA SINGH ENCLAVE AND PREM BHAGAT COLONY UNDER AGE (I) FATEHGARH

Amount

Demolition of brick work or stone /boulder masonery built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

Demolition of cement concrete of demolition of ground floor and paving not exceeding 15 cm thickness (above or below ground level) complete all as specified and directed.

M&L for 50 mm thickness PCC 1:3::6 type C1 using 20 mm graded stone aggregate in plinth protection including finishing smooth without using extra cement, complete all as specified and directed.

Dismantling of floor hearth or wall tiling any type including cement mortar bedding complete all as specified and directed.

M&L for coloured chequred cement concrete tiles of size 25cm x 25cm x25mm thick, set, jointed and pointed in neat cement slurry @ minimum 3kg/ Sqm in floor with grey cement and pigment including screed bed of 15mm thick in CM 1:6 complete all as specified and directed.

S&F glazed coloured ceramic tiles of sizes 300x450x7mm thick on vertical surface over & including 10mm thick rendering in CM 1:4 set & jointed in neat cement slurry @ minimum 9 Kg / Sqm and pointed in white or coloured cement to match complete all as specified and directed.

S&F Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceedifng 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed in neat cement slurry @ 3 Kg / Sqmand pointed in white or coloured cement to match over & including 15 mm screed bed in CM 1:6 complete all as specified and directed.

M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar of any description complete all as specified and directed.

M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces finished the surfaces even and smooth without using extra cement all as specified and directed

All as per item No 12 above but in CM 1: 4

M&L 5mm thick cement plastering in cm 1:3 on on ceiling surfaces even and smooth without using extra cement complete all as specified and directed.

Taking down chowkhats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats ) complete all as specified and directed.

All as per item ser No.15 above but exc 1.50sqm but n.exc 4 Sqm complete all as specified and directed.

Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm complete all as specified and directed.

S&F mild steel framed work of angle or any other section (grade 410 - 0 or Fe 310-0) as in door and door frame, gates of angle frame work etc including necessary welding etc complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S & F mild steel flat iron as in hold fast and similar small articles conforming to Fe 290 Gde E 165 complete all as specified and directed.

M & L for PCC 1 : 3 : 6 type C1 using 20 mm graded stone aggregate as in fixing of hold fast including necessary form work complete all as specifed and directed.

S&F Factory made panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Supply & fixing 35 mm thick factory made plain framed panelled shutters (any Nos of panels) of 2nd class hard wood with lock rail an panel inserts of 9 mm thick BWP commercial ply. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated compolete all as specified and directed.

S&F factory made 35mm thick glazed & skelton shutter of 2nd class H.W open rebated and prepare to receive the glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass gauge etc size of members of shutters as specified in SSR Part-I section 8 clause 8.24 (a) supplied and fitted to chowkhats complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks complete all as specified and directed

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks complete all as specified and directed

S&F Alum anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed.

S&F aluminium alloy handle cast type anodized of size 150mm long complete all as specified and directed.

S&F butt hinges medium weight cold rolled mild steel 100mm size complete all as specified and directed.

S&F 250 mm long Aluminium alloy anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S & F 300 mm ordinary rat rail made of MS rod pattern spring including roller and roller plate complete all as specified and directed.

S & F in repair curtain rod PVC coated anodised aluminium alloy rod of 25 mm bore with fixing fancy type brackets, stops, rollers, side dooms etc complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of wood primer complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty of fixed with beads complete all as specified and directed.

S & F 3 mm thick sheet glass, ordinary quality and glazing with mitred beads or oil putty including glazing clips in square not exc 0.50 sqm in each pane complete all as specified and directed.

S & F 3 mm thick figured glass, pin head type and glazing with mitred beads or oil putty including glazing clips in square not exc 0.50 sqm in each pane complete all as specified and directed.

S&F in renewal vitreous china water closet squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap for 100mm pipe (excluding flush pipe and flushing cistern) complete all as specified and directed.

S&F in repair for PVC low level flushing cistern 10ltr capacity, with syphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc incl PVC connection 450mm long complete all as specified and directed.

S&F in repair 15mm dia stop valve standard of PTMT any colour screwed for iron pipe and fixed.(Minimum weight 15mm - 90gms complete all as specified and directed.

S & F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tank vertical with closed top of 500ltrs capacity and fixed in position all as specified in SSR Part-I including disconnecting existing tanks and float vslve 20mm (PTMT) complete all as specified and directed.

S & F in repair Vitreous China Wash hand basin white flat back of size 550 x 400 mm including brackets, waste coupling 32mm dia and waste pipe complete all as specified and directed.

M & L three coats of white wash on new plastered wall surfaces including preparation complete all as specified and directed.

M & L Two coats of Oil bound distemper on new plastered wall suerfaces over a coat of alkali resistant primer over 3mm thick wall putty including preparation complete all as specified and directed.

M & L for two coats of Cement based paint over a coat of alkali resistant primer on new plastered wall surfaces including preparation complete all as specified and directed.

M & L three coats of white wash on new plastered Ceiling surfaces including preparation complete all as specified and directed.

Dismantling framed work timber scantlings 40sq. cm and over in section, in any position complete all as specified and directed.

M & L for 2nd class hard wood scantling as in frame work complete all as specified and directed.

Dismentaling of asbestos cement (Corrugated, semi corrugated etc) sheeting in roof covering complete all as specified and directed.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roof, fixed with L type or J type or cranked hook bolt complete all as specified and directed.

Pre-painted zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed.

S&F False Ceiling Horizontal level regular edge grid of size 600 x600 mm from work using hot dip sections and fixing tiles vinyl laminated MPL gypsum panels of size 595x595x6 to 8mm thick after lamination, suspended the grid with grid hangers to Roof Truss / RCC Slab all as per manufactured instruction. (Make- Amstrong / New-Age or equivalent)

S&F plain fillets clean sawn square, rectangular or triangular, section fixed with nails.(Second class hard wood cross sectional area exc 6 sqcm n.exc 13 sq cm.) complete all as specified and directed.

S&F for Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded complete all as specified and directed.

S&F for Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with out glazing bars , dovetailed or welded complete all as specified and directed.

S & F MS work as in window guard bars, plain, let in and fixed independently in wooden frames etc, and similar articles conforming to Fe 290 Gde E 165 complete all as specified and directed

S & F in repair for block boards, grade 2 quality, interior grade, decorative type with decorative ace veneer on face as in shelves of cupboards, alongwith beading of 2nd class hardwood of size 19mmx2mm, fixed with screws to timber frame work, complete all as specified and directed

M&L for built in steel Cupboard (shutter and frame) of pressed steel frame of size 75mm x45mm x1.25 mm thick with pressed steel shutter 1.00mm thick Godrej Pattern fixed to masonary walls by hold fast made out of 25 x 3 mm FI embeded in PCC 1 :2 : 4 type B-1 (using 20 mm graded stone aggregate) complete, incl two coats of spray painting over a coat of red oxide primer on steel surfaces, including hinges, handle / lock godrej pattern, complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

S & F GI tubes medium grade with all fittings fixed to walls and ceiling or laid in floors of 15 mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) or 15 mm bore of pipe complete all as specified and directed.

S & F GI tubes medium grade with all fittings fixed to walls and ceiling or laid in floors of 20 mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) or 20 mm bore of pipe complete all as specified and directed.

S & F in repair 15mm dia CP concealed type with long shank and capstan head for (Bath shower) in repair complete all as specified and directed.

S&F in repair PTMT shower rose 125mm size with swivel joint fancy type complete all as specified and directed.

S & F in repair Pillar Taps 15mm bore of PTMT any colour high pressure screwed for iron pipe (minimum weight 15mm-110gms) complete all as specified and directed.

M/s Moti Babu Agarwal

M/S S P CONSTRUCTION

M/S SRI JAGDAMBE TRADERS

M/S shree traders