SPECIAL REPAIRS TO CUPBOARDS IN BUILDING NO P 22 OF CTW AT MCEME UNDER GE MCEME SECUNDERABAD

Amount

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exceeding 1.5 sqm each but n. exc 4 sqm each complete all as specified and directed.

Dismantling boarding, cupboards shelves etc. any thickness and description , fixed with nails/screws complete all as specified and directed.

Dismantling timber scantling as in fillets, rails etc under 40 sqcm in section and fixed in any position complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L for White Makrana Marble slab 18mm thick for fixing in shelves of Inbuilt cup boards complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

M&L Makrana white Marble slab 18mm thick machine cut, bedded jointed & pointed with white cement slurry including cutting & polishing over and including15mm thick screed in CM(1:4) complete all as specified and directed.

S&F Mild Steel for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as per specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

S&F for Powder coated aluminium frame for doors of any colour (minimum thickness of powder coating 50 micron), windows, ventilators with one or more rebates including joining cleat for fixing etc. and the frame should arrange suitable number of tracks for sliding of cup board door shutters complete all as specified and directed. Make of Aluminium Sections:- M/S Indian Aluminium Coy, Hindalco, Jindal, Associated Profile & Aluminium Ltd. Ajit India

S&F for Pwoder coating aluminium door shutters thickness of main members not less than 0.45mm for cup boards sliding type of any colour (Thickness or powder coating not less than 50 micron)., including necessary joining cleats, glazing clips, ruber neoprene packing, suitable top and bottom sliding arrangemnts with rollelrs with soft closng system etc. handles 2 Nos in each cup board, anodised aluminum snap beading screws etc, locking arrangements with key etc., complete all as specified. Make of Aluminium Sections:- M/S Indian Aluminium Coy, Hindalco, Jindal, Associated Profile & Aluminium Ltd. Ajit India

M&L for Prelaminated particle board of 0.9 mm thick , exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F for curtain rods of stainless steel 20mm dia along with fixing brackets, stops, etc. complete all as specified and directed.

Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:4 with water proofing compound on brick surfaces of walls or concrete surfaces finishing smooth and making good and to match the old surface finish complete all as specified and directed. ( Water Proofing compound shall be measured separately)

M&L rendering 5 mm thick in CM 1:3 on brick on ceiling surfaces or concrete surfaces finishing smooth and making good and to match the old surface finish complete all as specified and directed.

Supply only Integral Water Proofing Compound complete all as specified and directed.

M&L for applying two coats of Oil Bound Distemper on newly plastered surfaces of wall over a coat of primer including preparing the wall surfaces including two coats of ALTEK wall care putty complete all as specified and directed.

M&L for applying two coats of OBD on newly plastered surfaces of ceiling over a coat of primer including preparing the ceiling surfaces including two coats of ALTEK wall care putty complete all as specified and directed.

M&L for applying two coats of OBD including preparing the old finished wall surfaces by scrapping of complete old finishes from the wall including two coats of ALTEK wall care putty complete all as specified and directed.

M&L for applying two coats of OBD including preparing the old finished ceiling surfaces by scrapping of complete old finishes from the ceiling including two coats of ALTEK wall care putty complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-1 using 20 mm graded aggregate finishing the surface smooth by using extra cement complete all as specified and directed.

Vara Enterprises

RAMALA ENTERPRISES