Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical accept |
Tender Value
₹3 L
EMD Value
₹6,000
Closing Date
27 Jun 2026, 5:00 pmClosed
EXECUTIVE OFFICE
NAGAR PALIKA KEKRI
Work regarding the installation of a tubewell and water tank near the workshop at the Kekri Roadways Depot.
2026_DLB_570241_4
07/2026-27
Open Tender
Civil Works
Percentage
30 days
work
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
EXECUTIVE OFFICER
₹6,000
Yes
2 Jul 2026
23 Jun 2026
29 Jun 2026
23 Jun 2026
27 Jun 2026
23 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | per IS 2800 (Part I & II) 1979 specifications. The work Construction of Tube well upto 100 Meter depth and above in all type of rocks by DTH system and over burden to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes but excluding cost of casing pibes as would be completed after obtaining sand free water The tube well should have a throughout bore as per nominal dia of casing pipe: 150 mm dia Nominal bore | 150 | P.Meter | 844 | ₹1,26,600 |
| 2 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank | 2,000 | P. liters | 8.8 | ₹17,600 |
| 3 | Supply of ERW MS black casing pipe ISI marked (IS 4270/1992) of grade Fe410 of following nominal bore sizes at site of work. 150 mm dia | 15 | P.Meter | 1,517 | ₹22,755 |
| 4 | Supply and fixing of tube well cover of M.S. sheet (6mm thick) with nuts and bolts complete for casing size 150 mm dia | 1 | P. Nos | 285 | ₹285 |
| 5 | Supply and fixing of M.S clamp set of 50 6mm flat iron with nuts and bolts etc for holding the riser pipe assembly of submersible pump set | 1 | P. Nos | 312 | ₹312 |
| 6 | Providing & Fixing of HDPE pipe Confirming to IS 4984 2021 for water supply suitable for submersible & jet pump with required fittings ie socket, elbows, Ise etc complete in all respect. All as per pre approved by Engineer in-charge parameters of products work For additional technical attached with this BSR for vertical installation 50 mm OD 6 kg/cm2 refer nnexure "A" | 75 | P.Meter | 118 | ₹8,850 |
| 7 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 2013 of 1.1 kV grade Wire should be made from 99 99% purity copper, class 5 stranding in acc to IEC 60228 for lower watt loss oxygen free 2 x 16.0 sq.mm | 20 | P.Meter | 443 | ₹8,860 |
| 8 | Providing and fixing gun metal non- return valve of approved quality (screwed end) 32 mm nominal bore Vertical | 2 | P. Nos | 1,106 | ₹2,212 |
| 9 | 100 mm diameter Submersible pump shall have foliowing HP Rating, phase, Head range. Discharge range respectively. 3.0 HP, 1-0, (40-170)Mtr, (60-20) LPM | 2 | P. Nos | 43,531 | ₹87,062 |
| 10 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings ilc fixing the pipe with clamps at 100 mspacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 25 mm nominal outer dia Pipes | 15 | P. Meter | 359.5 | ₹5,392.5 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.46 MB
BOQ_1015389.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .