Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.9 CrAccepted-AOC | ₹2.9 Cr | 1 | Accepted-AOC ok |
| 2 | 2₹3.3 Cr+₹34.1 L (11.6%)Rejected-AOC 123 B CENTRAL AVENUE SAINIK FARMS SOUTH DELHI DELHI 110062 | SOUTH DELHI | DELHI | 110062 | ₹3.3 Cr+₹34.1 L (11.6%) | 2 | Rejected-AOC ok |
| 3 | 3₹3.2 Cr+₹26.2 L (8.90%)Rejected-AOC | ₹3.2 Cr+₹26.2 L (8.90%) | 3 | Rejected-AOC ok |
Tender Value
₹5,900
EMD Value
₹3 L
Closing Date
27 Apr 2020, 2:00 pmClosed
EXECUTIVE ENGINEER
MAINTENANCE UNIT SHAKTI BHAWAN EXTN LUCKNOW
CARRYING OUT STRENTHING OF ELECTRICAL AND ASSOCIATED SYSTEM FOR MAIN BILLING DATA CENTER DATA CENTER AT SHAKTI BHAWAN EXTN BUILDING LUCKNOW
2020_UPPCL_459355_1
74/MU/SBE/2019-20
Open Tender
Electrical Works
Percentage
90 days
MAINTENANCE UNIT SHAKTI BHAWAN EXTN LUCKNOW
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,900
MAINTENANCE UNIT SHAKTI BHAWAN EXTN LUCKNOW
₹3 L
19 Sept 2020
17 Apr 2020
27 Apr 2020
17 Apr 2020
27 Apr 2020
17 Apr 2020
Amount
TRASFORMER :- 1000KVA TRANSFORMER , 11KV/433V COPPER WOUND, OIL COOLED ON LOAD TR. WITH HV & LV CABLE BOX COMPLETE WITH ALL ACCESSORIES. AS PER IS 1180 (LEVEL-2). Make - Schneider/CGL/ Voltamp
VOLTAGE STABILIZER :- 1000KVA VOLTAGE STABILIZER BALANCE TYPE 340-480V. Make- GLOBE/Aeon/Jindel
MAIN PCC PANEL :- Supplying, Installation, Testing and commissioning of dust, damp and vermin proof cubicle free floor, indoor type factory built sheet steel enclosed modular bolted construction extendable type Main PCC Panel, suitable for operation on 415 ±10% volts, 50 Hz AC 3 phase 4 wire supply system fabricated out of suitable sized square tubular section and covered with CRCA sheet steel of 2mm thick for frame work and 1.6mm covers (non load bearing), 2mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having extensible type TPN Aluminium bus bars of high conductivity, SMC bus bar supports, with bottom base channel of section not less than ISMC 75mm, fabrication shall be done in transportable sections, entire panel shall have a common G.I. earth bus bar to switch gears with required size of Alum. bus bars and inter-connection with solid copper conductor wires / aluminium strips, neutral links, including control wiring with 1.5 / 2.5sqmm. PVC insulated FRLS copper conductor Single Core cable, cable alleys, cable gland plates in two half, etc. necessary metering protections & indications and mounted with the following switch gears as per drawing and technical specifications etc. complete as required. The panel should be IBMS Compatible. (Including the item no 3.100 to 3.523.)
INCOMER FOR 1000KVA TRANSFOMER 1 :- 2500A 4P 50kA Frame Size: 1 EDO ACB, Release: Microprocessor based ET6A Trip Unit(with current metering), Type: EasyPact Make-MVSSchneider/L&T/ Siemens
Under Voltage Release (MN), 200/250V AC/DC for EasyPact MVS
Single Phase Voltmeter, Acc. Cl: 1.0, Model: DM1210
Single Phase Ammeter, Acc. Cl: 1.0, Model: DM1110
Multifunction Energy Meter with RS485, Parameters: Volts, Amps, PF, THD, F, W, Wh, VA, VAh, Var, Varh, Runhrs, Onhrs, Interupts, Preloaded Demand & Import /Export, Acc. Cl: 1, Model: EM6400NG
Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
Green Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
Yellow Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
6A 1P 10kA C-Curve MCB,Type: xC60
2500/5A Acc.Cl: 1 15VA Resin Cast Rectangular Current Transformer
INCOMER FOR 1000KVA TRANSFOMER 2 :- 2500A 4P 50kA Frame Size: 1 EDO ACB, Release: Microprocessor based ET6A Trip Unit(with current metering), Type: EasyPact MVS. Make- Schneider/L&T/ Siemens
Under Voltage Release (MN), 200/250V AC/DC for EasyPact MVS
Single Phase Voltmeter, Acc. Cl: 1.0, Model: DM1210
Single Phase Ammeter, Acc. Cl: 1.0, Model: DM1110
Multifunction Energy Meter with RS485, Parameters: Volts, Amps, PF, THD, F, W, Wh, VA, VAh, Var, Varh, Runhrs, Onhrs, Interupts, Preloaded Demand & Import /Export, Acc. Cl: 1, Model: EM6400NG
Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
Green Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
Yellow Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
6A 1P 10kA C-Curve MCB,Type: xC60
2500/5A Acc.Cl: 1 15VA Resin Cast Rectangular Current Transformer
INCOMER FOR 625KVA DG-1 :- 1000A 3P 50kA Frame Size: 1 EDO ACB, Release: Microprocessor based ET6A Trip Unit(with current metering), Type: EasyPact MVS .Make -Schneider/L&T/ Siemens
Under Voltage Release (MN), 200/250V AC/DC for EasyPact MVS
AC3: 205A AC1: 315A 3P Power Contactor,Coil: AC/DC ,Aux. contact: NA
Spare Coil AC, Voltage: 24/110/220/415V AC for F Model-LC1F185, LC1F225
Multifunction Energy Meter with RS485, Parameters: Volts, Amps, PF, THD, F, W, Wh, VA, VAh, Var, Varh, Runhrs, Onhrs, Interupts, Preloaded Demand & Import /Export, Acc. Cl: 1, Model: EM6400NG
Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
Green Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
Yellow Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
6A 1P 10kA C-Curve MCB,Type: xC60
1000/5A Acc.Cl: 1 15VA Resin Cast Rectangular Current Transformer
INCOMER FOR 625KVA DG-2 :- 1000A 3P 50kA Frame Size: 1 EDO ACB, Release: Microprocessor based ET6A Trip Unit(with current metering), Type: EasyPact MVS. Make- Schneider/L&T/ Siemens
Under Voltage Release (MN), 200/250V AC/DC for EasyPact MVS
AC3: 205A AC1: 315A 3P Power Contactor,Coil: AC/DC ,Aux. contact: NA
Spare Coil AC, Voltage: 24/110/220/415V AC for F Model-LC1F185, LC1F225
Multifunction Energy Meter with RS485, Parameters: Volts, Amps, PF, THD, F, W, Wh, VA, VAh, Var, Varh, Runhrs, Onhrs, Interupts, Preloaded Demand & Import /Export, Acc. Cl: 1, Model: EM6400NG
Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
Green Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
Yellow Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
6A 1P 10kA C-Curve MCB,Type: xC60
1000/5A Acc.Cl: 1 15VA Resin Cast Rectangular Current Transformer
BUS COUPLER :-2500A 4P 50kA Frame Size: 1 EDO ACB, Release: W/O Protection, Type: EasyPact MVS. Make- Schneider/L&T/ Siemens
Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
Green Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
BUS BAR :- 3000A TPN, 25KA aluminium bus bar with coloured heat shrinkable insulated sleeve.
OUT GOING :- 630A 3P 36kA MCCB,TMD Release,Type: EasyPact CVS. Make- Schneider/L&T/ Siemens
400A 3P 36kA MCCB,TMD Release,Type: EasyPact CVS. Make-Schneider/L&T/ Siemens
250A 3P 36kA MCCB,TMD Release,Type: EasyPact CVS. Make- Schneider/L&T/ Siemens
100A 3P 36kA MCCB,TMD Release,Type: EasyPact CVS. Make- Schneider/L&T/ Siemens
63A 3P 36kA MCCB,TMD Release,Type: EasyPact CVS. Make- Schneider/L&T/ Siemens
Spreaders (Set of 3) 3P for EasyPact CVS 400/630
Spreaders (Set of 3) 3P for EasyPact CVS 100/160/250A
Standard extended rotary handle for EasyPact CVS 400/630A
Standard extended rotary handle for EasyPact CVS 100/160/250A
Single Phase Ammeter, Acc. Cl: 1.0, Model: DM1110
Auxiliary Contacts (Changeover) Multifunction, OF or SD or SDE or SDV for EasyPact CVS 100-630A
Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
Green Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
Yellow Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
6A 1P 10kA C-Curve MCB,Type: xC60
600/5A Acc.Cl: 1 10VA Resin Cast Rectangular Current Transformer
250/5A Acc.Cl: 1 10VA Resin Cast Rectangular Current Transformer
100/5A Acc.Cl: 1 10VA Resin Cast Rectangular Current Transformer
60/5A Acc.Cl: 1 10VA Resin Cast Rectangular Current Transformer
DG SYNCHRONIZATION PANEL:- Supplying, Installation, Testing and commissioning of dust, damp and vermin proof cubicle free floor, indoor type factory built sheet steel enclosed modular bolted construction Synchronization Panel, fabricated out of suitable sized square tubular section and covered with CRCA sheet steel of 2mm thick for frame work and 1.6mm covers (non load bearing), 2mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade. (Including the item no 4.001 to 4.014.)
AGC-222 CONTROLLER WITH IOM-230 FOR DG's . Make- DEIF
PLC Make- SIEMENS
14 PIN 4C/O RELAY WITH BASE Make- BCH
SMPS Make- REPUTED/OMRON
2P2W SS. Make- SALZER
3P3W SS . Make- SALZER
RELAY BOARD. Make- OMRON/CONNECTWELL
BATTERY CHARGER Make - MAHAMAI
MCB DP 25A Make- SCHNEIDER/L&T/C&S
EMERGENCY STOP PB
SWITCH SOCKET BOARD Make - ANCHOR/EQUIVALENT
LED LIGHT 4W 230V Make- ANCHOR/EQUIVALENT
DOOR SWITCH Make- ANCHOR/EQUIVALENT
PROFIBUS CABLE (IN METERS) Make- SIEMENS
DG SET :- Supplying, Installation, Testing and commissioning of 625 KVA DG Set 739 BHP modell no: KTAA19-630 in canopy.DG set must have synchronization ready. Make- Cummins/Catterpillar/Perkins
SERVO BY PASS PANEL:- Supplying, Installation, Testing and commissioning of dust, damp and vermin proof cubicle free floor, indoor type factory built sheet steel enclosed modular bolted construction SERVO BY PASS PANEL, fabricated out of suitable sized square tubular section and covered with CRCA sheet steel of 2mm thick for frame work and 1.6mm covers (non load bearing), 2mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade. (Including the item no 6.001 to 6.008.)
2500A 4P 50kA Frame Size: 1 MF ACB, Release: Microprocessor based ET6G Trip Unit(without display), Type: EasyPact MVS Make- Schneider/L&T/ Siemens
Door interlock (VPECD)
VAF, PF Meter, Acc. Cl: 1.0, Model: DM6100
Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
Green Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
Yellow Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC
6A 1P 10kA C-Curve MCB,Type: xC60
2500/5A Acc.Cl: 1 15VA Resin Cast Current Transformer
Supply & laying of XLPE 185 SQMM 3.0 core HT aluminum PVC Insulated armoured cables. Make- Polycab/Hevells/KEI
Supply & laying of 185 XLPE SQMM 3.5 core LT aluminum PVC Insulated armoured cables. Make- Polycab/Hevells/KEI
Supply & laying of XLPE 70 SQMM 4 core copper PVC Insulated armoured cables. Make- Polycab/Hevells/KEI
Supply & laying of 2mm thick G.I.perforated type cable trays of suitable width
Supplying and laying G.I strip at below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required.
LABOUR CHARGE :- (a) ERRECTION & COMMISIONING. (B) Labour chages for the end termination. (c) Labour Chages for the dismantling of old setup.
civil work and shed modification required to accommodate the panels complete as required
EAGLE CONSTRUCTION
Third Wave Services Pvt Ltd
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .