Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹84.8 LAccepted-AOC 44B CIRCULAR GARDEN REACH ROAD KOLKATA 700 023 | KOLKATA | WEST BENGAL | 700023 | L1 | Accepted-AOC LOWEST AND RESONABLE | |
| 2 | L2₹89.8 L+₹3.4 L (3.88%)Rejected-Finance 9 EZRA STREET KOLKATA 700 001 | KOLKATA | KOLKATA | WEST BENGAL | 700001 | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹90.0 L+₹3.5 L (4.01%)Rejected-Finance 165 UTTAR KASTODANGA ROAD KOLKATA 700 061 | KOLKATA | KOLKATA | WEST BENGAL | 700061 | L3 | Rejected-Finance NOT BEING LOWEST | |
| 4 | L4₹96.1 L+₹9.6 L (11.1%)Rejected-Finance 2 10 PANCHANANTALA ROAD KOLKATA 700 041 | KOLKATA | WEST BENGAL | 700041 | L4 | Rejected-Finance NOT BEING LOWEST | |
| 5 | L5₹1.0 Cr+₹14.1 L (16.3%)Rejected-Finance 34 C R AVENUE JABAKUSUM HOUSE 3RD FLOOR ROOM NO 312 KOLKATA 700 012 | KOLKATA | WEST BENGAL | 700012 | L5 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹93.7 L
EMD Value
₹1.7 L
Closing Date
5 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE KOLKATA
Military Engineer Services No 1, National Library Avenue Alipore, Kolkata 700 027
AUGMENTATION OF WATER SUPPLY AT II LINES AT KOLKATA UNDER GE (A) KOLKATA
2022_MES_561892_1
8221/E-26/22-23
Open Tender
Miscellaneous Works
Item Rate
180 days
GE(A)KOLKATA
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,000
GE(A) KOLKATA
₹1.7 L
Yes
3 Feb 2023
7 Nov 2022
7 Dec 2022
7 Nov 2022
5 Dec 2022
21 Nov 2022
7 Nov 2022 - 14 Nov 2022
Amount
NOTES :(i)The bidders/contractors are advised to read tender document & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates. (ii) It is highlighted that the cretin condition of General Condition Of Contracts (IAFW-2249) has been modified as direction of MOD i.e inclusion of performance security, deletion of risk & cost provisions and increase in defects liability period all as specified in tender document. The tenderers should keep in mind while quoting their offer
Excavating in trenches, not exceeding 1.5 metres wide and not exceeding 1.5 metres depth for foundation etc and getting out in soft / loose soil complete all as specified and directed
All as per item no 2 but as in hard / dence soil complete all asspecified and directed
Returning, filling in trenches incl spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft / loose soil complete all as specified and directed
Removing excavated material n.exc 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed
Removing excavated material exc 250m but n.exc 500m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed
Removing excavated material exc 500 m but n.exc 1.5 km and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed
Material and labour for for PCC 1:2:4 type B-2 (40 mm graded aggregate ) as in foundation platform / for road repair and other works complete all as specified and directed.
Taking up unserviceable DI water tubing and connection (including all fitting) of 200mm bore from trench / wall / floor, complete all as specified and directed
All as per item No 9 here in above but 150mm bore DI pipe
All as per item No 9 here in above but 100mm bore DI pipe
Taking out unserviceable steel water tubing and connection (including all fitting) of 80 mm bore from trench / wall / floor complete all as specified and directed
All as per item No 12 here in above but 50mm bore steel water tubing
All as per item No 12 here in above but 40mm bore steel water tubing
All as per item No 12 here in above but 25mm bore steel water tubing
Taking out of unserviceable sluice valve / butter fly valve / NRV / Foot valve of any size complete all as specified and directed.
Demolition of old unserviceable valve pit and taking out of MS cover sheet with frame of any size and thickness complete all as specified and directed.
Taking out old unserviceable Star Delta starter of any capacity complete all as specified and directed.
Taking out old unserviceable submersible cable of 6 Sqmm 3 core complete all as specified and directed.
Supply, laying and testing, 200mm bore ductile iron pressure pipe, class K-7 suitable for rubber gasket joints in standard working length confirming to IS-8329/2000 with inside cement mortar lining duty duly ISI marked laid in trenches complete all as specified and directed.
All as per item No 20 here in above but 150mm bore
All as per item No 20 here in above but 100 mm bore
Supply and fixing to wall / laying in trenches 80mm bore GI steel tubing medium grade including all fittings such as Tees, elbow, bands etc complete all as specified and directed.
All as per item No 23 here in above but 50mm bore
All as per item No 23 here in above but 40mm bore
All as per item No 23 here in above but 25mm bore
Supply and fixing cast iron sluice valve (heavy duty) hand wheel operated ,non raising SS spindle with gun metal parts, confirming to IS 14846, both end flanged class PN 1.6 of 80 mm bore incl necessary nuts, bolts washers and gasket complete all as specified and directed.
All as per item No 27 here in above but 100mm bore
All as per item No 27 here in above but 150mm bore
All as per item No 27 here in above but 200mm bore
Supply and fixing cast iron non return valve (heavy duty) with hand wheel operated , SS spindle, confirming to IS 1538, both end flanged class PN 1.6 of 80 mm bore incl necessary nuts, bolts washers and gasket complete all as specified and directed.
All as per item No 31 here in above but 100mm bore
All as per item No 31 here in above but 150mm bore
Supply and fixing butterfly valve (wafer type) with SG iron disc gear operated, body SG iron , confirming to IS 13095, without lugs, lever operated,class PN 1.6 of 50 mm bore incl necessary nuts, bolts washers and gasket complete all as specified and directed.
All as per item No 34 here in above but 80 mm bore
All as per item No 34 here in above but 100 mm bore
All as per item No 34 here in above but 150 mm bore
Supply and fixing butterfly valve (wafer type) with SG iron disc operated, body SG iron , confirming to IS 13095, without lugs,class PN 1.6 of 200 mm bore incl necessary nuts, bolts washers and gasket complete all as specified and directed.
Supply and fix 150 mm bore foot valve of swing type with single disc confirming to IS 4038, after taking down old unserviceable valve complete all as specified and directed.
Material and labour for construction of brick masonry valve pit of size 90 cm x 90 cm x 90 cm (internal dimension) with burnt brick (sub class "B") in cement mortar (1:6) on 75 mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in foundation, 15mm thick rendering in cement mortar (1:4) internally, externally up to 15cm below GL, providing valve pit cover made out of 3mm thick MS sheet duly welded with provision of hinges, handle and locking arrangement including 40 x 40 x 5mm angle iron frame fixed on top of valve pit by means of hold fast 150mm long, embedded in PCC block 1:2:4 type B-1 (20mm graded aggregate) of size 230 X 200 X 100mm, applying two coats of anti-corrosive paint over a coat of red oxide, zinc chrome primer after preparation of steel & iron surfaces including necessary excavation & earth work in soft/loose soil and demolition of existing one complete as specified and directed all as per relevant TD drawing. (Note : Drawing not attached with the tender document. However, the same can be seen in GE/AGE E/M office during working hours)
All as per item no 40 but of size 600mm x 600mm x 600mm internally complete all as specified and directed
Supply and fixing bends (any type, radius and angle) for spigot socketed bend, increasing decreasing or double socket etc) Tee pieces single branch, 'Y" junction double branch cross (all sockets or socket and spigot) collars, caps and plugs complete all as specified and as directed by the Engineer-in-Charge. (i) Upto 150mm dia bore
(ii) 200mm dia bore
Material and labour of unserviceable water level indicator from over head tank / UG sump & supply and fix new water level indicator (Mechanical type) on OH Tank / UG Sump in position duly connected from plastic coated steel wire rope 8mm dia passing over MS pulley 50mm dia & hanging over calibrated scale on MS Sheet 3.15 mm thick including painting of scale for letters with white colour over two coat of synthetic enamel paint and one primer coat on MS board with & including bracing, supports, clamps grouted on wall of tank at desired height and back plate etc fabricated from structural steel section with bolts, nuts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under and one finishing coat of red oxide complete all as specified and as directed
Taking out UNSV ladder of Aluminium / Angle iron and supply and fix of ladder fabricated with angle iron frame 50mm x 50mm x 6mm, 45cm wide & providing angle iron steps of size 40mm x 40mm x 6mm thick at the in tervals of 30cms including cutting, welding bending to shape of any length including two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed by Engineer -in-Charge.
Supply and fixing fully automatic electronic type star delta starter in sheet steel encloser with contractor, electronic star delta timer, voltmeter and ammeter complete for 60 HP motor complete all as specified and directed.
All as per item No 46 here in above but for 25HP Motor
All as per item No 46 here in above but for 15HP Motor
All as per item No 46 here in above but for 10HP Motor
All as per item No 46 here in above but for 7.5 HP Motor
Supply and Fixing 100mm dia PVC foot valve ball type conforming to IS 4038 complete all as specified and directed
All as per item No 51 here in above but for 150 mm dia
Supply and fixing mild steel framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-0 Gde E-250 complete all as specified and directed.
Materal and labour PVC insulated PVC seathed flat submersible cable of size 6 Sqmm x 3core for connection of pump to starter including making water pump connections etc complete complete all as specified and directed.
Supply only rubber insulation matting 19mm thick ISI marked 2 x 1 m size complete all as specified and directed.
Material and labour for fabrication of aluminium bulletin board made out of double door shutter of size 884mm x 593mm using 40mm x 18mm aluminium section, main frame of size 1222 mm x 921mm made of aluminium section 40mm x 18mm duly strengthed by another aluminium section of size 20mm x 20mm complete duly fixed with prelaminated particle board of size 1220mm x 920mm x 3mm (thick) at back and 4mm thick plain glass housed in front shutter panels using high class PVC gasket complete including two steel handles with magnetic locks at shutter to facilitate smooth opening complete all as specified and directed.
Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.
Prasur Electricals & Engineering Co.
MS AP CONSTRUTION AND CO
ARATI TRADING CO
Tirupati Buildcon Pvt. Ltd.
M/S KANCHAN KANTI BAKSI
Shree Mahabir Builders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .