NIT NO:-11/RMC/ZONE 08/2026 RAIPUR DATED– 01.06.2026

OFFICE OF THE MUNICIPAL CORPORATION RAIPUR , DISTT. RAIPUR(C.G)

NAME OF WORK : - Estimate for repair of meeranagar bsup at ward no. 70

As Per P.W.D. building 01.01.2015

S.NO. PARTICULARS NO. L. B/W D. QYT. UNIT RATE AMOUNT

1 16.43 Demolishing cement concrete including disposal of material within 50 metre lead.

1:3:6 or richer mix

2 12.1 Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 kg/ sqm for receiving cement concrete floor including roughening cleaning etc complete.

3 12.3.3 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 75 mm thick

4 16.36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base.

5 16.53 Removing following vitreous china sanitorywares carefully for re-use including stacking within 50 metres lead.

16.53.3 European/ Anglo Indian WC pan of all sizes 176 176.00 EACH 46.00 8096.00

6 18.2.3 Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required: 176 176.00 Each 1440.00 253440.00

White Orissa pattern W.C. pan of size 580x440 mm

7 18.76 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 176 1.50 264.00

8 18.77 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

18.77.1 Tee/ Tee with door/ Bend 45°/ Bend 90° 176 36.00 Each 113.00 4068.00

9 18.78 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete

10 19.15 Providing and fixing stainless steel drain jali of approved make/quality.

11 19.7 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete: 1 35.00 35.00 mt. 318.00 11130.00

19.7.4 32 mm dia. nominal bore

12 19.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL

19.4.3 25 mm nominal outer dia .Pipes. 176 3.00 528.00

19.4.2 20 mm nominal outer dia .Pipes. 176 1.50 264.00

13 19.11 Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete:

14 19.16 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end):

15 19.17 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

19.17.2 20 mm nominal bore 11 11.00 each 394.00 4334.00

16 19.13 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality:

17 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.1.5 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).

TOTAL AMOUNT 1009434.00

SAY RS. (IN LACS) 10.09

Technically Sanctioned for Rs . . . . . . . . . .

Sub Engineer Assistant Engineer Executive Engineer

Municipal Corporation Municipal Corporation Municipal Corporation

Raipur ( C.G. ) Raipur ( C.G.) Raipur ( C.G. )

OFFICE OF THE MUNICIPAL CORPORATION RAIPUR , DISTT. RAIPUR(C.G)

NAME OF WORK : - Estimate for repair of meeranagar bsup waste water pipe, water proofing of slab and other work at ward no. 70

As Per P.W.D. building 01.01.2015 & electrical 2020

S.NO. PARTICULARS NO. L. B/W D. QYT. UNIT RATE AMOUNT

1 16.43 Demolishing cement concrete including disposal of material within 50 metre lead.

1:3:6 or richer mix

2 18.76 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.

3 18.77 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

18.77.1 Tee/ Tee with door/ Bend 45°/ Bend 90°

18.77.3 Vent covel

4 18.78 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete

5 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.1.5 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).

6 11.1 Providing and making 6mm thick cement plaster of mix:

In Cement mortar 1:4 (1 cement : 4 fine sand)

7 14.12 Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete.

white wash 52.50 sqm 23.00 1207.50

8 14.11 Wall painting with acrylic luxury emulsion (plastic) paint of required shade to give an even shade.

On new work (two or more coats) 52.50 sqm 52.50 2756.25

9 4.22 Providing Water proofing treatment over Roof, Wall, Chhajjas, Balcony with Diamond Shield and Sealer coat or equivalent at leakage/ seepage area consisting of the operation: (i) Surface preparation roughening of surface, opening of cracks in ‘V’ groove in size of 5mm x 10m (WxD), filling of cracks with putty of Diamond shield with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/ Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii) Providing and applying 1st coat of diamond shield or equivalent compound (having two component dry powder 80% Chemical 20% (chemical having 30% solid contents) making flexible waterproof and protective modified mortar with minimum thickness 70-80 micron after proper mixing of both the parts of compound along with laying of fiber glass mesh (of weaving size of 10x10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd coat with minimum thickness 100 micron of the same compound. Allow the 2nd coat to set in natural air for minimum 4 Hrs. Total consumption of the diamond shield or equivalent in both coat should be @ 17.90 kg for 10sqm area. Providing Water proofing treatment over Roof, Wall, Chhajjas, Balcony with Diamond Shield and Sealer coat or equivalent at leakage/ seepage area consisting of the operation: (i) Surface preparation roughening of surface, opening of cracks in ‘V’ groove in size of 5mm x 10m (WxD), filling of cracks with putty of Diamond shield with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/ Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii) Providing and applying 1st coat of diamond shield or equivalent compound (having two component dry powder 80% Chemical 20% (chemical having 30% solid contents) making flexible waterproof and protective modified mortar with minimum thickness 70-80 micron after proper mixing of both the parts of compound along with laying of fiber glass mesh (of weaving size of 10x10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd coat with minimum thickness 100 micron of the same compound. Allow the 2nd coat to set in natural air for minimum 4 Hrs. Total consumption of the diamond shield or equivalent in both coat should be @ 17.90 kg for 10sqm area.(iii) Over the above layers providing and applying 1st coat of sealer compound (Single component High Build elastomeric, flexible, pure acrylic waterproofing membranes having solid content of 65%) minimum 50-60 micron and allow it to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd and final coat 120-140 micron of sealer compound and allow it to set in natural air for minimum 4 Hrs. Consumption of Sealer compound should be @ 5.40 kg per 10 sqm area. The final area appearance of the coating will be milky white. (iv) The treated area should be cure with water for 48 hrs by flooding the surface. All above operations to be done in order

TOTAL AMOUNT 1 block 180470.75

for 6 block 1082824.50

SAY RS. (IN LACS) 10.83

Technically Sanctioned for Rs . . . . . . . . . .

Sub Engineer Assistant Engineer Executive Engineer

Municipal Corporation Municipal Corporation Municipal Corporation

Raipur ( C.G. ) Raipur ( C.G.) Raipur ( C.G. )