Tender for Providing and Fixing of Modular Furniture and Storage Cabinet at NIPGR

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built-up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminum sections shall be smooth, rust-free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, and paneling to be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50 micron

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Institute.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

Providing and installing a cabinet with sliding door for the Imaging Room(for Battery Bank), fabricated from 12 mm thick particle board with aluminium frame, including vertical partitions of size 4 ft × 7 ft and 10 ft × 7 ft (or as per actual site requirements), and a sliding door of size 3 ft × 6 ft, complete with good quality hardware and accessories including sliding track, rollers, handles, locks, stoppers, fittings, fasteners, and all other necessary fixtures, finished in a neat and workmanlike manner, complete in all respects as per site conditions and the instructions of the Institute/Engineer-in-Charge.

Controller of Administration