SPECIAL REPAIRS TO BLDG NO P 123 OFFRS MD ACCN HAIG LINE AND SPECIAL REPAIRS TO JCOs MD ACCN BLDG NO P 88 AND P 90 AT BHS LINE OF TASA SIG COY UNDER GE NORTH SECUNDERABAD

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, etc complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed

M&L for 10mm thick vitrified dark shade doubly charged polished ceramic tiles,area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for 10mm thick vitrified dark shade doubly charged polished ceramic tiles, area of each tile not exceeding 0.36 Sqm, in skirtings/ dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick cement plaster backing coat in cement mortar 1:4 complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, and cement screed in cement mortar 1:6, 15mm thick and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 300x450/450x300/1450x350x7mm thick on vertical surfaces such as dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in cement mortar 1:4 complete all as directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick over 20mm thick screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and as directed.

M&L for machine cut kota stone slab 18-20 mm thick as in riser of steps, skirting, dado and pillar laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 10mm thick backing coat in cement mortar (1:4) such as dado/skirting in vertical surface complete all as specified and as directed.

M&L for 20mm to 25mm thick Granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over screed bed of 15mm thick in cement mortar 1:6 complete all as specified and as directed.

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar shine complete all as specified and as directed.

Demolition of cement concrete in floors and pavings n.exc15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided in roof padding concrete etc complete including removal of demolished material to a distance complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate ) for filling in sunken floors complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair face of brickwork or concrete surfaces of sunken floors duly mixed with water proofing compound at the rate of 2% by weight of cement or as per manufacturer's instructions in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed Note : Water proofing compound shall be measured and paid separately under relevant items in this schedule.

Material and labour for application of one coat of water based bitumen emulsion primer at the rate of 0.3 litre per SQM after cleaning of the surfaces thoroughly from dust, dirt and projections and applying water proofing treatment with APP polymeric membrane of weight 3 kilogram per SQM and minimum 3mm thick reinforced with polyster non oven fabric (weight not less than 150 gm/SQM) over that a coat of blown bitumen of 85 / 25 at the rate of 1.2 kilogram per SQM over that providing a sand layer of 25mm thick thick in sunken floors complete all as specified and as directed.

M&L for PCC 1:2:4 Type B0 using 12.5 mm graded aggregate with water proofing compound @2% by weight of cement or as per manufacturer's instructions as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamferred on edges and formwork etc complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under relevant items in this schedule.

Material and labour for rendering 10 mm thick in cement mortar (1:3) using water proofing compound @2% by weight of cement or as per manufacturer instructions on roof and chajjas including finish the surface even and fair complete all as specified and directed . Note : Water proofing compound will be measured and paid separately.

Supply only integral water proofing compound for roof and sunken floor complete all as specified and as directed.

M & L for providing water proofing treatement with APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick reinforced with polyester non oven fabric ( weight not less than 150gm/Sqm) applying on one coat of oil based bitumen emulision primer @ 0.3 lit per sqm (OR as per the directions of manufacturer instructions) including cleaning of surface thoroughly from dust, dirt and projections. Laying of membrane by forced (torch) application with 10cm overlaps. A coat of blown bitumen 85/25 grade @ 1.2 Kg/Sqm to be applied on top of memberane, finally coating the surface with bituminous aluminium paint @ 100gm/Sqm complete all as specified and as directed.

Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick works in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 5mm thick in cement mortar (1:4) with WPC at the rate of 2% by weight of cement or as per manufacturer's instructions over a layer of 10 mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under relevant items in this schedule.

M&L for rendering 5 mm thick on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for prepartion of newly plastered surfaces on wall and applying two coats of oil bound distemper over a coat of primer including 3mm thick wall care putty in two coats complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and over applying three coats of white wash on wall surfaces complete all as specified and as directed.

M&L for preparation of newly plastered on wall surfaces including applying two coats of weather proof exterior paint over a coat of exterior primer complete all as specified and as directed.

M&L for preparation of new plastered ceiling surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

M&L for complete removal of existing treatment on wall /ceiling surfaces and applying two coats of oil bound distemper over a coat of primer over a coat of 3mm thick birla wall care putty in two coats etc complete all as specified and as directed.

M&L for complete removal of existing treatment and applying three coats of white wash on ceiling complete all as specified.

M&L for Complete removal of existing treatment on walls and applying 2 coats of apex ultima weather proof paint over a coat of apex ultima primer including preparation of surfaces complete all as specified and as directed. Make : Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux

M&L for preparation of old painted wooden surfaces and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each including steel window, ventilators etc complete with builders hardware all as specified and as directed.

M&L for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed.

S&F Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing.

S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin complete all as specified and as directed.

S&F 150mm size aluminium anodised handles, fabricated type complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exceeding 1.5 Sqm each but n.exc. 4 Sqm each including Builders Hardware complete all as specified and directed.

Supply and fix Pressed steel door frame of size 105 X60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc with one coat of primer complete all as specified and as directed

S&F 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc with one coat of primer complete all as specified and as directed

Cutting holes in brick wall built in cement mortar depth of embedded portion of hold fast exc half brick but not exc one brick and making good disturbed portion in cement mortar 1:3 complete all as specified.

Material and labour for plain cement concrete 1:3:6, type C1 (using 20 mm graded stone aggregate) as in coping, bed plates, filling back hollow portion of chowkats complete all as specified and as directed

M&L for 35 mm thick flush door shutters solid core construction with block board core with decorative face finish on one sides complete all as specified and as directed.

S&F glazed and skelton shutters divided into squares with plain, chamfered or rounded, mitred and rebated sash bars prepared to receive glass, gauge sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24 (a) 35mm thick second class hard wood complete all as specified and as directed.

S&F in repairs double action spring hinges mild steel with steel wire spring, stove enamelled black 100 mm long complete all as specified and as directed.

M&L aluminium alloy anodised sliding door bolt with hasp staple (bolt type) of length 300mm fixed complete all as specified

S&F floor rubber door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor 150 mm length complete all as specified and directed.

S&F standard aluminum sections of any type as in doors, windows, ventilators, partitons etc, powder coated, cut to size, jointed with cadmium plated steel screws, including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), Nylon ball bearings and Unit rate quoted shall be deemed to include for sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window etc complete all as specified and as directe Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment. Cost of other consumables required for the item shall be deemed to be included in the quoted rate. However glass panes only will be measured and paid separately under respective items as supply only. Fixing by element of these items shall be deemed to be included in quoted rate.

Supply only 4.8 mm thick sheet glass, ordinary quality, in each pane for n exc 0.50 Sqm each pane for aluminium sliding windows/ventilator shutters etc complete all as specified and as directed.

Supply only 4.8 mm thick sheet glass, ordinary quality, in each pane for exc 0.50 Sqm each pane for aluminium sliding windows/ventilator shutters etc complete all as specified and as directed.

Supply only 4 mm thick figured glass, pin headed type in squares not exceeding 0.5 Sqm in each pane fixed to aliminium frame work complete all as specified and as directed.

S&F for stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, fixed in aluminium windows complete all as specified and directed.

S&f MS Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar workcon- forming to Fe.290 Gde-E-165 complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer including preparation of new steel surface of any description over 10 cm width and girth complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of wooden surfaces exceeding 10cm girth or width complete all as specified and as directed.

M&L for 2nd class hard wood plain fillets, square, rectangular in section wrought screwed with nails area exceeding 13sqcm but not exceeding 25 Sqcm complete all as specified and directed .

S&F in repairs MDF board, 18/19 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging complete all as specified and as directed.

S&F in repairs MDF board, 12 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and directed.

S&F Hasp & staple 100 mm size aluminium anodised fixed with screws complete all as specified and directed.

S&F in repair continuous (piano) hinges 30 mm width of cast, brass, bright finish or electro galvanised complete all as specified and directed.

Supply and fix stainless steel curtain rod of 25 mm bore fancy type complete all as specified and as directed

Supply and fix in repairs for stainless steel curtain rod brackets (decorative type) suitable for curtain rod of 25 mm dia, complete all as specified and as directed

S&F in repairs wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excluding flushing cistern ) etc complete all as specified and directed.

S&F in repair Vitreous china orissa pan squatting pattern 580 X 440mm with integeral foot rests including P or S trap, PVC low level flushing cistern of 10 ltrs capacity including PCC 1:5:10 type E2 complete as directed by Engr-in-Charge.

S&F in repairs vitreous china wash basin, white, flat back of size 580mm X 450mm including CI brackets, 32mm dia brass chromium plated waste fittings with long screwed shanks and fly nuts flanged end bedded in red lead cement and other end fixed with & including cutting for & pinning in end of brackets and 15mm bore pillar tap, cast copper alloy fancy type chromium plated, screwed down high pressure complete all as specified and as directed.

S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle including cantilever brackets and flush pipe of polyethylene of low or high density of PVC 32 mm dia including taking down of old existing one complete all as specified and as directed

S&F 15 mm dia 45 cm long PVC water connection with PTMT nuts and washers complete all as specified and directed.

Supply and fix in repairs bathroom mirror cabinet PVC of size 400 X 500 mm fancy type complete all as specified and as directed. Make : Cat No-554 of Prayag or equivalent as approved by GE.

S&F in repairs CP Soap dish fixed with chromium plated brass screws complete all as specified and as directed.

S&F in repairs brass chromium plated tubular towel rail 600 mm long complete all as specified and directed. Make: Cat No-AQN-7711 of Jaquar or equivalent as approved by GE.

S & F in repair 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fix in repairs of plastic water closet seat, black or white closed pattern, solid type with flat bottom, cover and mild steel chromium plated hinging device with recessed bottom complete all as specified and as directed.

S&F in repairs stop cock cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed on both ends for iron pipe chromium plated 15 mm dia complete all as specified and directed.

S&F in repairs concealed stop cock cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed for both ends for iron pipe but fancy type 15mm dia, chromium plated with long shank and cup (concealed type) complete all as specified and as directed.

S&F in repair bib cock/tap cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed on both ends for iron pipe 15 mm chromium plated long body complete (but fancy type) complete all as specified and as directed.

S & F in repair 125mm size brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union complete all as specified and as directed.

S&F GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls or ceilings including taking down old GI tubes complete all as specified and directed.

S&F GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls or ceilings including taking down old GI tubes complete all as specified and as directed.

S&F GI tubing 25mm bore medium grade galvanised with all fittings and fixed complete to walls or ceilings or laid in floors including taking down old steel tubing complete all as specified and as directed.

S&L in repairs CI floor trap with grating including jointing to waste pipe with dia of outlet 75mm complete all as specified and as directed.

S&F UPVC/PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls laid in trench or in floors bore of the pipe 110 mm complete all as specified and as directed.

S&F UPVC/PVC (SWR) bends 110 mm complete all as specified and directed.

S&F UPVC/PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm complete all as specified and as directed.

S&F UPVC/PVC (SWR) bends 75 mm all as specified and as directed.

S&F UPVC/PVC (SWR) branch pieces single (equal or unequal) (size or socket type or with parallel branches with access door bore of the pipe 110 mm ) complete all as specified.

S&F UPVC/PVC (SWR) branch pieces double (equal or unequal) (size or socket type or with parallel branches with access door bore of the pipe 110 mm ) complete all as specified.

S&F UPVC/PVC (SWR) branch pieces single (equal or unequal) (size or socket type or with parallel branches with access door bore of the pipe 75 mm ) complete all as specified.

Supply and fix in repair 110 mm bore UPVC/PVC (SWR) Vent Cowl complete all as specified and as directed .

S&F in repair stainless steel sink with draining board made out of 1.00 mm thick sheet for kitchen with plug and washers, waste pipe with cantilever brackets.over all size 915 X 460mm bowl size 410mm X 330mm X160mm complete all as specified and as directed.

S&F in repairs Stainless steel plate rack of size 31"X36"X10" complete all as specified and directed. Make: Cat No-P-348 of Prayag or equivalent as approved by GE.

Supply and fix in repair CP health faucet with 01 Mtr tube and hook complete all as specified. Make : Cat No:ALD-579 of Jaquar or equivalent as approved by GE.

Supply and fix in repair wall mixer with provision of overhead shower with 115 mm long bend pipe on upper side , connecting legs & wall flanges complete all as specified and as directed. Make :Cat No: FLR-5273UPR of Jaquar or equivalent as approved by GE.

S&F in repairs toilet paper holder, vitreous china, box type coloured, fixed with chromium plated brass screw complete all as specified and as directed.

Dismantling water tanks of exc 250 but n.exc 500 ltr capacity and removing to store complete all as specified and directed.

S&F rotational moulded polythylene water storage tank triple layer (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Ltrs complete all as specified and as directed.

Dismantling water tanks of exc 500 but n.exc1000 ltr capacity and removing to store complete all as specified and directed.

S&F of rotational moulded poly thylene water storage tank triple layer (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs complete all as specified and directed.

S&F in repairs Gun metal globe or gate valves of 20 mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair 20 mm Ball brass valves. high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F in repairs 25 mm dia brass ball valve, high pressure with polythene float and flynut complete screwed for iron pipeor brass ferrule complete all as specified and as directed.

Cutting Chases, pinning in, making good to facing where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good of cutting in brick wall n.exc 10 cm girth complete all as specified and as directed.

Supply and fix in repair sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

Material and labour for brick work with flyash bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for brick work with bricks flyash bricks, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed

Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for mild steel TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M & L for RCC type B1, 1:2:4 (nominal mix) using 20 mm graded stone aggregate as in slabs supported on walls,and columns in floors, roofs, landing,deck slab and shelves etc complete all as specified and as directed.

Material and labour for Stainless steel railing with 40 mm dia standard pipe verticals at 600 mm c/c, 03 Nos 20 mm dia horizontal / inclined members at equal spacing, 50 mm dia hand rail at top including bending ends, cutting, welding, smoothing, cutting holes etc including embedded / fixed with PCC 1:2:4 type B1 (using 20 mm graded stone aggregate ) complete all as specified and as directed.

S&F 18mm thick plywood BWR type fixed with screws to timber frame work complete all as specified and as directed.

M&L for 1mm thick colour/white laminated sheet fixed to wooden surface with glue complete all as specified and as directed.

S&F 200mm long stainless steel decorative handle fixed with screws complete all as specified and as directed.

S&F 200mm long stainless steel hinge for cabinets auto close concealed type complete all as specified and as directed.

S&F stainless steel telescopic type ball bearing drawer channel of any size complete all as specified and as directed.

S&F stainless steel kitchen basket of size 17"x20"x4" of size complete all as specified and as directed.

All as per item No.117 above but of size 17x"x20"x6"

All as per item No.117 above but of size 17x"x20"x8

Supply and fix Stainless steel dust bin holder 10" dia complete all as specified and as direcetd .

Supply and fix stainless steel bottle pullout of size 106 mm X 476 mm X 130 mm complete all as specified .

S&F 12mm thick plywood BWR type fixed with screws to timber frame work complete all as specified and as directed.

Demolition cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and as directed

M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 etc., complete all as specified and directed.

M&L for Rendering 10 mm thk in CM (1:4) as in backing coat of cement plaster for laying of wall tiles etc: complete all as specified and as directed.

M&L for virtified ceramic tiles 10mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match etc, complete all as specified and directed.

M&L for virtified ceramic tiles 10mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in walls skirting etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match etc.complete all as specified and as directed.

S&F Non Skid (coloured) ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specifed and as directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded aggregate) in copings, kerbs, channels, water through and the like including weathering, slightly rounded or chamfered angles and throating as directed chamfered necessary form work complete all as specifed and as directed.

Taking down shutter of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specifed and as directed.

S & F 35 mm thick factory made second class hardwood, plain framed panelled shutters (any number of panel) with panels of timber flat on both sides(feather edged) or of veneered particle board medium density wood particle board with commercial veneering on both faces complete all as specifed and as directed.

S & F 35 mm 2nd class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24(a) etc complete all as specifed and as directed.

Supply and fix steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated (Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. (outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullion should be 72mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.45mm dia and ave width of aperture 1.4mm shall be used for fly proofing 4mm thick plain sheet glass to be used for glazing of glazed shutters complete all as specified and as directed. Make: NCL Alltech or equivalent in M/s Madhu Industries, Bangalore, M/s Godrej & Boyce, Mumbai as approved by GE.

S&F MS sliding door bolts plate type stove enamelled black, with brignt bolt not less than 12mm dia with and including a minimum of 6 Nos bolt and nuts, four on bolt plate and two on staple plate of 300mm length of bolt complete all as specifed and as directed.

S&F for Mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete

S&F in repair aluminium powder coated (fancy type) tubular curtain rod, 20mm dia, complete all as specified and as directed.

S&F in repair bracket aluminium powder coated (fancy type) for 20 mm dia tubular curtain rod(for item above) complete all as specified and as directed

S&F in wash down water closet (pedestal pattern) white and including S & P trap plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excluding flushing cistern ) etc complete all as specified and directed.

S & F in repairs shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105 gms) complete all as specifed and as directed.

S & F in repairs Towel rail 600mm long of PTMT fixed with and including CP brass screws and wooden/plastic cleats. (Minimum weight 190 gms) complete all as specifed and as directed.

S&F UPVC/PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap and fixing of stainless steel grating in round shape etc complete all as specified and as directed.

Supply & fixing PVC (SWR) junction single (single T) equal or unequal 110mm dia with access doors complete all as specifed and as directed.

Material and labour for rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 without using extra cement complete all as specified and as directed

M & L for preparing the old plastered or unplastered decorated surfaces of walls and applying two coats of white wash complete all as specifed and as directed.

M & L for preparation of old painted wooden surfaces of any description over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specifed and as directed.

M&L for preparing old painted surfaces of walls and applying two coat of weather proof paint on external surfaces of walls and ceiling, including necessary scaffolding and safety precautions to the work complete all as specified and as directed. Make : Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux

Taking down of old bituminous tarfelt or any other type of roof treatment from roof/ concrete surfaces removal to distance exceeding 250 metres and not exceeding 500 metres from the site and cleaning of the roof surface with wire brush to make it free from dust, dirt etc complete all as specified and as directed

Excavation in trenches not exceeding 1.5 metres wide and not exceeding 1.5 metres deep for laying of drain pipes etc., for manholes and getting out in hard and dense soil complete all as specified and as directed

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 centimetres in each layer of the excavated soil complete all as specified and as directed

Removing the excavated material to a distance not exceeding 50 metres and deposited where directed at a level not exceeding 1.5 metres above the starting point complete all as specified and as directed

Demolition and breaking up drain pipes NP3 (salt glazed ware AC or reinforced concrete) set in cement mortor 150mm dia complete all as specified and as directed

Material and labour for 150 mm internal dia salt glazed stoneware drain pipes, grade ‘A’ laid in trenches with cement joints complete all as specified and as directed

Material and labour for reinforced concrete pipes, class NP3 150 mm bore laid in trenches with one collar per length and jointed with cement joints complete all as specified and as directed

Material and labour for concrete bed to drain pipes of 150 mm dia including packing under and haunching against the sides of pipes with concrete, after they are laid including testing in plain cement concrete 1:3:6, type C2 using 40 mm graded aggregate with necessary form work complete all as specified and as directed

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 150 mm dia of pipe complete all as specifed and as directed.

Material and labour for providing precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in cover slabs,manholes and similar articles with plain faces with plain fair faces including chamfers, weatherings, throating etc and set in cement mortar 1:4 complete all as specified and as directed.

Supply and fix in position TMT bars 8mm dia and over cut to length, bent to shape required including cranking, bending, spirally hooking for ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed

M&L for 75 mm thick plain cement concrete 1:4:8 mix,type D2 (using 40 mm graded stone aggregates) as in subbase to floor complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006 of 60 mm thickness, M-35 grade etc complete all as specified and as directed.

M&L for Spreading and levelling of Sand cushioning below interlocking tiles complete all as specifed and as directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specifed and as directed.

Material and labour for point wiring complete with stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded CONCEALED with new MS Modular steel terminal boxes suitable for MODULAR switches including fixing/grouting sunken/ surface as per site requirement covered with suitable modular white cover plate for suitable size for mounting of MODULAR switches, regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly and making good the disturbed wall surfaces to match with the existing surfaces complete all as specified and as directed for the following :- (a) One light/ Bell point controlled by one, one way switch 5 amps, SP

All as per item No. 163 above, but for one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator

All as per item No. 163 above, but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

All as per item No. 163 above, but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No. 163 above, but for one light point controlled by two, two way switch 5 amps, single pole.

Description all as per item No.163 here-in-before, but using 2.5 Sqmm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade FRLS for 3 Pin 15 Amps switch socket combination point on independent board including running of 2.5 Sqmm copper conductor PVC insulated cable FRLS as earth continuity conductor.

Supply and fix MODULAR switch 1 way 6 A, 1 Module capacity 230 volts complete all as specified and as directed.

Supply and fix MODULAR socket 5 pin 6 amps 2 MODULE, 230 Volts complete all as specified and directed.

Supply and fix MODULAR socket 6 pin 6/16 amps 2 MODULE, 230 Volts complete all as specified and as directed.

Supply and fix Switch MODULAR 1 WAY 16 amps, 230 Volts complete all as specified and as directed.

Supply and fix electronic ceiling fan regulator MODULAR 5 stepped type heavy duty suitable to work on 230 volts complete all as specified and as directed.

Supply and fix Modular bell push of 6 Amps SP, 230 volts AC complete all as specified and directed.

Supply and fix Switch MODULAR two way 6 amps, 230 volts, 1 module complete all as specified and directed.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with PVC round blocks complete all as specified and directed.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and directed.

S & F ding dong Bell AC,230 Volts, single pole complete all as specified and directed.

S & F wall mounted LED Batten,extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1x20 w watts, 230 volts, bipin holders, DIFFUSED TYPE connector block, internally pre wired etc with 2 Nos PVC round block arrangements including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting all as directed. Make : Havells cat No-REGALBATTENT8UPTO1X22WSSB SWH incl Tube Rod cat No-PHOTONULTRA2.01213T8SSTL 20WLED865SPC, Wipro cat No WI0921208 incl Tube Rod LL13-181-65SE, Philips Cat No. TMC501P1xT-LED22WP 3241 incl tube rod 20W.

Supply anf fix LED security light luminaire fitting of 1x35 watts with deep drawn housing including all accessories with suitable 40 mm dia GI bracket 0.60 Mtr length fixed on wall with 50x6 mm flat iron, clamps, nuts and bolts complete all as sepcified and as directed. Make: Havells Cat No - ENDCITYLITPLATE+SL35WLED 757SASYBOPCWOSPD/ Wipro Cat No LR13-501-XXX-57-XX/ Philips Cat No - BRP030 LED35 CW MR PSU GR DX.

S & F Wall mounted light fitting suitable for 1x10 Watt LED Bulb complte with all accessories incl 01x 9 Watt LED bulb complete all as specified and directed. Make - Havells (Model-CITY 3) or equivalent in Philips/Wipro as approved by GE.

S & F wall mounted LED Batten,extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 1x10 Watts, 230 volts, bipin holders, DIFFUSED TYPE connector block, internally pre wired etc with necessary mounting arrangements including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting all as directed. Make: Havells cat No-LHEWEBP51N1W010 or equivalent in Philips/Wipro as approved by GE.

Material and labour for sub main wiring with three runs of single core FRLS PVC multistranded stranded unsheathed copper conductor cable of size 10 Sqmm and drawing through PVC conduit of 25mm dia with accessories on concealed in wall/roof along with one run of 10 Sqmm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board including removing the existing wiring and making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 5 runs of 10 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.

Material and labour for sub main wiring with two runs of single core FRLS PVC insulated, multistranded unsheathed copper conductor cable of size 2.5 Sqmm and drawing through PVC conduit of 20mm dia with accessories on concealed in wall/roof along with one run of 2.5 Sqmm FRLS PVC insulated unsheathed multi stranded 1100 volts grade with copper conductor cable as earth continuity conductor connected to earth and earth dolly, connecting to main board duly making good the disturbed wall surfaces to match with the surroundings complete all as specified and directed. Note: 3 runs of 2.5 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre.

S & F in replacement of Environmental fridendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs complete all as specified and as directed. Make: Havells RUGBYNEONFT10WLED860SSYMTOPC or equivalent in Bajaj/Wipro as approved by GE.

Material and labour for earthing with galvanized mild steel earth plate electrode 60 centimetre x 60 centimetre x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level, the top edge of the earth plate at a depth of not less than 1.5 metres below ground level connected to galvanized iron earth wire of 4 mm dia by means of bolts, nuts and washers made out of GI / steel earth wire protected by GI light grade pipe 15 mm bore, 20mm dia light grade galvanised iron pipe with funnel wire mesh for watering and connecting to main switch board / control board all s shown in electrical plate of SSR Pt - I connected to earthing test point and including testing on completion complete all as specified and as directed. NOTE: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 type C1 by using 20 mm graded aggregate in pit, 50 mm thick reinforced cement concrete 1:2:4 type B1 using 20 mm graded aggregate cover duly reinforced with 8 mm dia TMT bars @ 100mm centre to centre both ways, galvanised iron funnel with watering pipe, wire mesh, complete.

S&F in replacement of sheet steel MS enclosure earth plug socket 2 pin 20 amps with metal 20 amps with MCB 20 amps complete all as specified and as directed.

Supply and fixing Exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers all as specified and directed. Make - Bajaj/Havells/Crompton

Supply and fix vertical type TPN distribution board of 4 way double door with incoming MCCB TPN 415 volts AC, 3 phase, 50 Hz, 25 KA Breaking Capacity with fixed magnetic setting for current rating of capacity 100 Amps including MCCB 4P conforming to IS 13947 (P-2) IEC: 947 made out of CRCA sheet housing with powder coated conforming to IS 13032, IS 8623, BS 5486 accommadated suitably in a mild steel enclosure weather proof mild steel sheet having hinged and robust locking arrangement and taking down old unserviceable DB complete all as specified and as directed. Make - Standard/Havells/Legrand

S & F MCB TP 63 Amps 240 volts, 25KA for fixing on MCB DB's all as specified.

Supply and fix TPN distribution board of 4 way double door with incoming MCB TPN 415 volts AC, 3 phase, 50 Hz, 10 KA Breaking Capacity with fixed magnetic setting for current rating of capacity 63 Amps including MCB 4P conforming to IS 13947 (P-2) IEC: 947 made out of CRCA sheet housing with powder coated conforming to IS 13032, IS 8623, BS 5486 accommadated suitably in a mild steel enclosure weather proof mild steel sheet having hinged and robust locking arrangement and taking down old unserviceable DB complete all as specified and as directed. Make: Havells/Standard/Legrand

S & F MCB SP 6 to 40 Amps 240 volts for fixing on MCB DB's all as specified.

Supply and fixing Exhaust fan, steel body AC single Phase. 230V of size 230m sweep with, blades, and frame and louvers complete all as specified and directed. Make: Bajaj/Havells/Crompton

Supply and fixing ceiling fans 1200mm, aluminium body, power consumption not more than 28W, BEE 5 star rated with BLDC motor, service value greater than 8.40 CMM/W, air deliver minimum 235 CMM, 350 RPM compatible with step regulator for speed control along with down rod, Canopy-2 Nos including taking down existing old vintage ceiling fan with regulator and depositing to MES store complete all as specified and directed. Make - Bajaj/Havells/Atomberg Note :- The following documents to be produced while approval :- (i) NABL test report (ii) BEE certificate (iii) BIS certificate (iv) Waranty cetificate for 5 years.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with magnetic locking system complete all as specified and directed.

S & F MCB SPN 40 Amps 240 volts for fixing on MCB DB's complete all as specified and directed.

Supply and Laying LT UG cable of size 2 core x 16 sqmm in trenches /floors/on wall /service connections XLPE insulated, PVC sheathed and armoured 1100 volts grade with aluminium conductor complete all as specified and directed. Make : Havells/Polycab/Finolex

SKY CONSTRUCTIONS