Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.9 LAccepted-AOC FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L1 | Accepted-AOC Awarded as first lowest bidder (L1) | |
| 2 | L2₹33.9 L+₹5.4 L (19.0%)Rejected-AOC PASHAN PUNE | L2 | Rejected-AOC Being second lowest bidder | |
| 3 | L3₹34.5 L+₹6.0 L (21.2%)Rejected-AOC 123 23 1 SHRISANT APARTMENT MANGALMURTI NAGAR PASHAN SUTARWADI ROAD PASHAN PUNE MAHARASHTRA 411021 | PUNE | MAHARASHTRA | 411021 | L3 | Rejected-AOC Being third lowest bidder | |
| 4 | L4₹34.7 L+₹6.2 L (21.7%)Rejected-AOC PLOT NO 1134 1196 MORIVALI VILLAGE TAL AMBARNATH DIST THANE AMBERNATH 421505 | AMBERNATH | THANE | MAHARASHTRA | 421505 | L4 | Rejected-AOC Being forth lowest bidder | |
| 5 | L5₹37.5 L+₹9.0 L (31.7%)Rejected-AOC FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L5 | Rejected-AOC Being fifth lowest bidder |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
27 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GERD PASHAN PUNE
GERD PASHAN PUNE
CERTAIN MISC BR WORK INCL DAY TO DAY PETTY REPAIRS OF OTM ACCN MD ACCN UNDER AOR OF AGE BR PASHAN
2023_MES_606956_1
GERD/PSN/TOKEN/22 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GERD PASHAN PUNE
As per tender documents
9 documents required · 9 mandatory
₹500
GERD PASHAN PUNE
₹60,000
Yes
16 Sept 2023
30 Jun 2023
29 Jul 2023
30 Jun 2023
27 Jul 2023
14 Jul 2023
30 Jun 2023 - 6 Jul 2023
Amount
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed by Engineer-in-Charge.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and jointed in cement mortar or bedding, Complete all as specified and as directed by Engineer-in-Charge.
Demolition of Cement Concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 25mm thick Cement concrete 1:2:4 type B-1,( using 20mm graded crushed stone aggregate) as in sub base of flooring, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 75 mm thick Cement concrete 1:3:6, type C1, (using 40 mm graded stone aggregate) in plinth protections/ hard standing path etc finishing the surface even and smoth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour for coloured Non Skid ceramic tiles 7 mm to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 4, complete all as specified and as directed by Engineer-in-Charge.
Material and labour for coloured Non Skid ceramic tiles 7 to 8mm thick polished (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 4, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for double charge Vitrified ceramic tiles 8 to 9mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, as in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 4, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for double charge Vitrified ceramic tiles 8 to 9mm thick (square/rectangular), as in skirtings, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including rendering 10 mm thick in cement mortar 1 :3 as backing coat, Complete all as specified and as directed by Engineer-in-Charge. Note : Size of tile shall be all as directed by the Engr-in-charge.
Material and labour for Light coloured Glazed ceramic tiles in vertical surface as in skirting or dado 300 mm x 450 mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including rendering 10 mm thick in cement mortar 1 :3 as backing coat, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 20mm thick granite (of any type) work (Table rubbed and polished) in steps, jambs, pillars, windows cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite,laid over and including 20mm thick screed bed in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Drilling holes on granite, cudappa or trap stone for bolts. Pipes, etc. n.exc 25 mm dia, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for polishing of existing terrozo tile by rubbing with grinding machine including using 220-350 grit carborundum stone repair & filling of joints, cement with pigment to match the existing tile washing thoroughly and finally polishing with bee wax polish, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for polishing of existing terrozo tile dado/skirting by rubbing with grinding hand machine including using 220-350 grit carborundum stone repair & filling of joints, cement with pigment to match the existing tile washing thoroughly and finally polishing with bee wax polish, complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Machine cut cudappa stone slab flooring 20 to 25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid over and including screed bed in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 20mm thick Granite (of any type) tiles machine cut in skirting/dado laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing, laid over and including screed bed in CM 1:3 complete all as specified and as directed by Engineer-in-Charge.
Demolition of cement concrete in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge.
Material and labour for water proofing treatment of sunken floor as under :- (a)15mm thick plaster in cement mortar 1:4 with WPC (b) application of cement slurry mixed with and including acrylic based polymer modified cementitious composite compound coating in two layers as per direction of Engineer inCharge including 200 micron thick polymer film should be pasted with the help of adhesive after treatment, Complete all as specified and as directed by Engineer-in-Charge. Note: (i) Make :- Dr Fixit/ Asian paints/ Fosroc /M/S Sikka. (ii) The work shall be executed only through authorised applicator of manufacturer.
Material and labour for Cement concrete in foundations, filling and mass-concrete, 1:5:10 Type E2 (Using 40mm graded crushed stone agrregate) as in sunken floors, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 40mm thick Cement concrete 1:2:4 Type B1 (using 20mm graded crushed stone aggregate) as in floor, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs PVC connections 15mm size with PTMT nuts of length 600mm, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs Vitreous China wash basin, white, flat back, size 550mmx400mm excluding taps, waste chain and plug and porcelain stopper fixing on existing brackets, including supply and fixing of flexible waste outlet pipe of 32 mm dia of required length, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 32mm bore waste coupling of PTMT (half or full threaded) Minimum weight, 45gms, suitable for vitreous china wash basin, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs Swan Neck fancy type 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (Min wt 675 grams), Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs 10Litres capacity low level PVC flushing cistern valveless, syphonic action type, , white, with inlet, ball valve, float and handle including brackets, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts (excluding flushing cistern and flush pipe) including pan seat cover, complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs Vitreous China squatting pan, `Orissa' pattern, size 580 mm x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of cement concrete bedding, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repair 15mm bore Fancy type long body chromium plated Bib taps, cast copper alloy fancy type, screwed down, screwed for iron pipe or for brass ferrule (minimum weight 550 grams), Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs 15mm bore chromium plated Angle cock, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions (minimum weight 400 grams), Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including PTMT waste coupling (half or full treaded) (Min wt 40mm bore - 60 grams) and PVC waste pipe 32 mm dia, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs sinks without drain board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, including PTMT waste coupling (half or full treaded) (Min wt 40mm bore - 60 grams) and PVC waste pipe 32 mm dia, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs soap dish, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs 2 in 1 mixture valve of brass chromium plated, 15mm bore, screwed down, screwed for iron pipe or for brass ferule and fixed, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with and including chromium plated bracket guard and railing 60cm long, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs swivel shower chromium plated with shower arm 15 mm size, 195 mm long with bend of 45º with flange fixed to 15 mm dia GI tubing, shower roses with or without swivel joints,125mm size, including fixing to steel pipe or union, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs toilet paper holder of chromium plated fixed to walls with and including chromium plated brass screws, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs two way bib cock of brass chromium plated, 15mm bore, screwed down, screwed for iron pipe or for brass ferule and fixed Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs 1.2metre long chromium plated health faucet including holder fixed to wall, Complete all as specified and as directed by Engineer-in-Charge.
Dismantaling water tanks exceeding 250 litres and not exceeding 500 litres, Complete all as specified and as directed by Engineer-in-Charge.
Dismantaling water tanks exceeding 500 but not exceeding 1000 litres, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 500 Litres ISI embosed Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 1000 Litres ISI embosed Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 500 litres capacity PVC loft water tank and fixed in elevated positon all as directed, Complete all as specified and as directed by Engineer-in-Charge.
Taking out old chocked 20 mm bore GI pipe and connections from trenches, walls, ceilings, floors etc complete all as specified and directed.
All as per item No.48 above but 15 mm bore
Supply and fix 20 mm bore GI tubing medium grade with and including necessary fittings complete to walls and ceilings or laid in floors of the following sizes,Complete all as specified and as directed by Engineer-in-Charge.
All as per item No.50 above but 15 mm bore
Material and Labour for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth as in stone / concrete block walls, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs PVC body box type cabinet mirror of size 450mm x 600mm, Complete all as specified and as directed by Engineer-in-Charge. Make: Prayag,
Supply and Fix in repairs 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm² fixed complete to walls, ceilings or in floors etc, including all pipe fittings, Complete all as specified and as directed by Engineer-in-Charge.
Taking down rain water pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning for refixing or removal to store, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 110 mm bore PVC (SWR) bends of any radius, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix for 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix for 75 mm bore PVC (SWR) bends of any radius, Complete all as specified and as directed by Engineer-in-Charge.
Taking down chowkats or frames (without taking of shutters from the frames) not exceeding 1.5 Sqm each, Complete all as specified and as directed by Engineer-in-Charge.
Taking down shutter of size exceeding 1 Sqm but not exceeding 2 Sqm each, Complete all as specified and as directed by Engineer-in-Charge.
Taking down existing chowkats or frames (without taking of shutters from the frame) exceeding 1.5sqm but not exceeding 4 sqm, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix factory made Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix extruded aluminium alloy handles, fabricated type anodised 125 mm size, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 125 mm long aluminium anodised barrel tower bolts of extruded section, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 100 mm long MS butt hinges medium weight cold rolled welded to steel frame / fixed to wooden and PVC frame with suitable screws, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Mild steel flat iron as in hold fasts or similar small articles conforming to Fe-290 Gde E-165, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for II class hardwood, Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated (II class hard wood), Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix factory made 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 35mm thick II class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a) supplied and fitted to chowkats, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of new wooden surfaces of width or girth exc 10 cm and applying two coats of synthetic enamel paint over a coat of pink primer, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 300mm long aluminum alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix extruded aluminium alloy handles, fabricated type anodised 150 mm size, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 150 mm long aluminium anodised barrel tower bolts of extruded section, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs Aluminium powder coated sliding windows three track consists of 03 Nos of shutters i.e 02 Nos of Glazed shutters and 01 No of gauzed shutter with size of sections of styles and rails all as directed by Engineer-in-Charge NOTE :- (i) All aluminium section including galzing clips, snap beading, joining cleats, rubber packing screws etc as required are deemed to be including in the rate quoted. (ii) Thickness of powder coating minimum 50 micron. (iii) Glass & wire cloth shall be measured and paid separately under respective items
Supply and fix in repairs Aluminium powder coated ventilators partly fixed and partly louvered of aluminium section designed DG-2762 (40 mm x 32 mm x1.5 mm thick) (wt 0.668 kg/metre) frame and DG-2763 and middle section of designed DG-2763 (40 mm x 32 mm x 1.5 mm thick) (wt 0.654 kg/metre), middle section DG-2546 (17.27 mm x 17.15 mm x 1.22 mm thick) (wt 0.124 kg/metre) including 5 mm thick pin headed figured glass louvers with and including blades of 100 mm heavy duty including with aluminium lever handle fixed panel shall be provided with 5 mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed with and including minimum 6 Nos of suitable size galvanised screws with PVC plug etc, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs factory made box type steel window, comprisingof double rebated frame made of ERW Hollow outer profile of size 80mmx60mm of 1.25mm wall thickness of frame including side hung double shutters (i.e one side of frame glazed shutters with sash bars and other side of frame skelton shutter without sash bars) made of ERW hollow section 40mmx20mm of 1mm wall thickness, glazed shutter divided in three panels with two Nos sash bars welded to frame of shutter and prepared to receive sheet glasses including provision of flate iron strip of size 15mm x 3mm (02 Nos) to skelton shutter with revetted bolt to secure wire mesh, providing hold fasts 04 Nos of required size complete as per Drg No CERD/TD-485/2021 sheet No 1/5 to 4/5 including a shope coat of red oxide primer and making holes 04 Nos in brick wall / stone wall / concrete for each window for fixing hold fasts of size 150x230x75mm, PCC 1:2:4 type B-1 using 20mm graded stone aggregate as for hold fasts including necessary form work,Complete all as specified and as directed by Engineer-in-Charge. Note:- (i) Glass panes, wire mesh & painting shall be measured & paid separately under respective items of BOQ. (ii) Design shall be got approved from Engineer-in-Charge before fabrication and placing bulk order to the manufacturer. (iii) TD drawing are not being enclosed but these shall from part of the tender documents. The same may be seen in GE office during working hours.
Supply and fix 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sq.m in each pane, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 5mm thick tinted glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sq.m in each pane, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, Complete all as specified and as directed by Engineer-in-Charge.
Dismantling wrought iron or mild steel work and elevated iron loft tank of any description not otherwise provided for, Complete all as specified and as directed by Engineer-in-Charge.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified and as directed by Engineer-in-Charge. (Fe 410 Gde 250 Quality A)
Supply and fix Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 , Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix mild steel framed work such as grills, gratings, etc, with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters:walk ways, railing, framed work of water tanks and similar work conforming to Fe 290 Gde E-165, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Pre-painted galvalume aluminium zince coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of new or previosly untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, over a coat of primer complete all as specified and as directed by Engineer-in-Charge.
Dismantling boarding of any description, fixed in any position, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work / steel frame aluminium frame wide complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs 40mm flaps (when open) continuous (piano) higes, mild steel, bright finish or electrogalvanised, Complete all as specified and as directed by Engineer-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones and Supply and fix 4mm thick Sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm each pane, Complete all as specified and as directed by Engineer-in-Charge.
Dismantling of old MS hinges of any type from steel windows/ventilators and Supply and fix new MS box type hinges in same or new position, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs 20mm bore stainless steel Gde 304 curtain rods approved by GE, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs stainless steel fancy type brackets suitable for 25mm dia curtain rods approved by GE, Complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, Complete all as specified and as directed by Engineer-in-Charge.
Supply and Fix in repairs 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed, Complete all as specified and as directed by Engineer-in-Charge.
Supply and Fix in repairs 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed, Complete all as specified and as directed by Engineer-in-Charge.
Supply and Fix in repairs 125mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12, Complete all as specified and as directed by Engineer-in-Charge.
Supply and Fix in repairs 150mm long Extruded brass handles, fabricated type polished, Complete all as specified and as directed by Engineer-in-Charge.
Supply and Fix in repairs brass body door stopper of 150 mm long overall length and tongue with hard drawn steel spring, Complete all as specified and as directed by Engineer-in-Charge.
Demolition of brick work/ stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for for PCC block masonry with solid blocks, exc 10 cm in width and setting CM 1:6 precast cement concrete block of type C-1 with 1:3:6 (using 20 mm graded stone aggregate), Complete all as specified and as directed by Engineer-in-Charge.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, Complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 using WPC, Complete all as specified and as directed by Engineer-in-Charge. (wpc will be measured and paid seprately)
Material and Labour for Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, Complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for Rendering 20mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in cement mortar 1:4 using WPC, Complete all as specified and as directed by Engineer-in-Charge. (wpc will be measured and paid seprately)
Material and Labour for Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in cement mortar 1:6, Complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for Rendering on ceiling, 5mm thick on fair faces of concrete surfaces in cement mortar 1:3, Complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for preparation of newly plastered ceiling surface and applying three coats of white wash, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of newly plastered wall surface and applying two coats oil bound distemper over a coat of 1mm thick wall care putty and a coat of primer, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of newly plastered wall surface and applying two coats of acrylic weather proof paint over and including a coat of acrylic primer, Complete all as specified and as directed by Engineer-in-Charge.
Demolition of reinforced cement concrete in roof, floors (other than ground floor), beams/lintel beam, stair case, landing, chhajas and similar suspended work, Including cutting of old rustsed TMT bars, Complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for RCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) in slabs supported on walls, beams/lintel beams and columns in floors, roofs, landings,cooking plateforms, balconies, canopies, deck slabs and in shelves etc, Complete all as specified and as directed by Engineer-in-Charge. Note : Reinforcement shall be measured and paid separately.
Material and Labour for RCC 1:2:4 type B1 (using 12.5mm graded crushed stone aggregate) in Chajjas, fins, roof projection etc , complete all as specified and directed. Note : Reinforcement shall be measured and paid separately.
Material and Labour for Form work to sides and soffits of chajjas, fins, roof projection,shelves including supports etc,to fair finished surface of concrete flat, Complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for Form work to soffits of slabs including supports etc,to fair finished surface of concrete flat, Complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips including anchoring and welding at places as directed, Complete all as specified and as directed by Engineer-in-Charge.
Cleaning of any type of roof area exceeding 100 Sqm but not exceeding 300 Sqm, by removing leaves, vegatation growth, debris and accumulated mud by washing brushing or by any means without hampering the water proofing membrane(if provided) from permanent roof not accessible including cleaning of rain water pipes of any description and removing debries/spoil from site and depositing the same to low lying area exceeding 0.5 km and not exceeding 1.5km, Complete all as specified and as directed by Engineer-in-Charge.
All as per item No 122 here in above but area of roof exceeding 300Sqm but not exceeding 500 Sqm, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for disconnecting existing PVC water tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc from tanks and from mouthts of circulating pipes etc and hoisting if required reconnecting and refixing in position capacity exceeding 250 litre and n exc 500 litres, complete all as specified and as directed by Engineer-in-Charge.
All as per Item No 124 here in before but of 1000 litre capacity.
Supply and fix in repairs 20mm Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, Complete all as specified and as directed by Engineer-in-Charge.
Taking down existing roof treatment in any position with bitumenous felt including backing cement plastered of any thickness in roofs (other than ground floors), beams, chajjas, staircase etc and removing the rubbish to a distance exceeding 250 metre and n. exc 500metre deposited where directed complete all as specified and as directed by Engineer-in-Charge.
Dismantling of exisiting old padding concrete of any thickness of existing water proofing treatment over the RCC slab other than beams, chajjas, stircase etc by chipping of with proper tools viz chiesel and with applying reasonable force so as to avoid any damages exiting RCC roof slab, Complete all as specified and as directed by Engineer-in-Charge.
Material and labour for cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in levelling / padding course on roof slab, chajjas, projections on similar surfaces existing with slope, kerbs, rounded or chamfered edges, making the surface even and smooth without using extra cement, including using liquid water proofing compound, Complete all as specified and as directed by Engineer-in-Charge. Note: supply of Integral water proofing compound will measured and paid seperately.
Material and labour for 10mm thick cement plaster in CM 1:4 over PCC (while concrete is green) using approved liquid water proofing Note: supply of liquid water proofing compound will measured and paid seperately and dosage as per manufacturer instructions) complete all as specified and as directed by Engineer-in-Charge.
Supply only liquid water proofing compoud as approved by GE complete all as specified and directed.
Material and labour for applying water based polyurethane modified dispersion (single component, cold applied, non toxic, VOC complaint) in 03 coats including 01 coat of epoxy primer @ .15 Kg per Sqm followed by two coats of polyurethane coating with 1.5 Kg per sqm in two coats etc complete per manufacturer specification inclduing cleaning the surface mechnically, crack treatment by cutting open cracks and cleaning based sealent including applicator of PU based primer complete all as specified and as directed by Garrison Engineer/Engr-in-Charge. Notes : For Above items Sr No 132 1. Properties of Polyurethane based chemical shall confirm to following Technical Parameters:- (i) Highly Elastic and shall have crack bridging ability of upto 3mm as per AS NZ 4548 (ii) UV Resistance. (iii) Adhesion to concrete and shall resist 7 bars of hydrostatic pressure. (iv) Tensile strength should not less than 2.0 N/sq.mm for free film & 60 % solid content as per ASTM C 1250 (v) Elongation should not less than 300% as per ASTM D2370 (vi) Solid content by weight should not less than 60%. (vii) Air/water permeability BSEN 12390 AT 5 bar -72 hours should be NIL and minimum dry film thickness of water proofing membrane must be 1.0mm. (viii) Accelerated weathering (ASTM453) should Pass 1000 hours. (ix) Reaction to fire – non inflammable. 2. The work shall be executed thru auth applicator of manufecturer only. Contarctor has to provide manufecturer test certificates for the above mentioned technical parameters and PVs. 3. The conractor has to submit the guarntee for 10 Years against the water proofing treatment. Make:- Bostic, Berger,Fosroc, sika, Asian.
Rays Breakers
R. K. Industrial Fabricators
shakti engineering and electrical works
S.K.HARAL
M/S.J.V.Datar
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .