8903/2022-23/E8

Amount

M&L for excavating in post holes (or similar holes) each n.exc 0.5 Cum , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer n.exc 25 cm, watering, and removing surplus soil to a distance n.exc 50 mtr and making good surfaces in hard/dense soil complete all as specified and as directed.

M & L cement concrete type C-2 1:3:6 (Using 40mm graded stone crushed aggregates) in foundation filling and mass concrete for post holes complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe 410-W(Gde-E-250 ) quality A and all as specified and directed by the Engr -in-charge.

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screw as specified and as directed.

M&L preparation of new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

M&L for surfaces excavation n exc (not exceeding) 30cm deep and averaging 15 cm deep and getting out in hard/soil complete all as specified and as directed.

M&L Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

M&L for hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for cement concrete 1:3:6 Type C2 (using 40mm graded crushed stone aggregates) 100mm thick as in sub base complete all as specified and directed and as directed.

M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

M/s Aman Enterprises

Havish Construction

M/s. Gee Gee Enterprises

M/S RUDHRAKSH TRADING CO

M/s. Rishav Sood

M/s Shakti Electric Works

Roshan Lal Thakur

Pathania Builders

M/S Ajay Kumar Mahajan