Construction of Indoor Stadium in MC Panipat under CM Announcement

Amount

Supply and installation of tested Vetrotech Saint-Gobain VDS® fully glazed fire-rated Latched double leaf door system with 120 minutes of integrity and radiation control (EW 120) with symmetrical (bi-directional) fire protection through a VDS Certified Installer. The frames shall be made of imported cold rolled profiles. The door frames are cold rolled from 1.5 mm steel sheet to form a profile of 50 mm x 50 mm on all sides. The door shutter would have the top rail, side rail and bottom rail dimensions of 50 mm x 50 mm. The overall door opening shall be as per tested evidence and tested as per EN 1634-1 in an accredited international laboratory. The glass shall be CONTRAFLAM LITE (14mm) clear, non-wired, toughened, interlayered, 120 minutes fire-rated glass for integrity and radiation control (EW 120) and insulation (I 20) with a light transmission of 86% and a sound reduction of 38 dB and manufactured in UL and TUV audited facility and including UL-EU Certification (File number R38101) and compliant to class 1(B)1 category of Impact Resistance as per EN 12600. The glass shall be tested for 5000 hours of UV resistance as per EN ISO 12543-4. The glass shall be EPD (Environmental Production Declaration) verified in accordance to EN 15804 and ISO 14025 in which its life cycle assessment is performed considering Cradle to Gate system boundaries. The glass must produce a recycled content declaration committing to a pre-consumer cullet of up to 11% and post-consumer cullet less than 1%. The glass shall provide bi-directional (symmetrical) fire protection. The shutters should be fixed to the frame using weld-on hinges of dimensions 179mm X 20mm. The profiles shall have grooves to incorporate fire-resistant gaskets. The doors shall incorporate drop down seal at the bottom. The glass should be held in its place with the help of 1.5 mm cold rolled steel beading and Kerafix 2000 ceramic tape with cross section of 4 x 15 mm as per the test evidence. The beading shall be clipped on using stainless steel self-tapping screws fixed at a distance of 70 mm from the edges and 150 mm c/c henceforth. The glass panes are to be supported on non-combustible 5 mm thick calcium silicate setting blocks. The door should be fitted with panic bar (Dorma PHA 2000) and door closer of Dorma (TS 73V, TS 83V, TS93V), Geze (TS 2000NV) or equivalent. The inactive leaf should be fixed to the frame using a tower bolt at meeting edge at top or as per the tested evidence. The doors shall be manufactured in a TUV audited facility.

BUTTERFLY VALVE WITH ON/OFF TYPE MOTORIZED ACTUATOR Single phase 220V with limit switches, C I body and PN 1.6 pressure rating SS Disc and shaft of Feedback, BMS Compatible for overhead tank filling as specified duly insulated of following sizes as per specification and drawings. Cost should include necessary control wire (minimum size 1.5 sq.mm) for 32 mm dia

Providing, fixing, joints and testing in position the following UPVC Pipe confirming to IS:4985 of 6kg /sqcm for garden irrigation system cut to required length pipe to be laid below level in trenches up to required depth, including excavation in all kind of soil (hard rock) dewatering, refilling, watering, ramming and removing the surplus excavated material and putting 100 m sand all-around and making good the same. for 63 mm dia

Providing, fixing, joints and testing in position the following UPVC Pipe confirming to IS:4985 of 6kg /sqcm for garden irrigation system cut to required length pipe to be laid below level in trenches up to required depth, including excavation in all kind of soil (hard rock) dewatering, refilling, watering, ramming and removing the surplus excavated material and putting 100 m sand all-around and making good the same. 50 mm dia

Providing, fixing, joints and testing in position the following UPVC Pipe confirming to IS:4985 of 6kg /sqcm for garden irrigation system cut to required length pipe to be laid below level in trenches up to required depth, including excavation in all kind of soil (hard rock) dewatering, refilling, watering, ramming and removing the surplus excavated material and putting 100 m sand all-around and making good the same. 40 mm outer dia

Providing and fixing in position 25 mm dia lawn hydrants consisting of 25 mm dia Ball valve, GI nipple and threaded hose receiver complete as required.

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design:

Constructing Silt trap of size 1000mm x 2000mm x 1000mm effective deepth in brick masonry with bricks of class designation 7.5 in cement mortar 1:6 (1 cement: 6 coarse sand) including necessary excavation and foundation concrete 150mm thick in 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate of 40mm nominal size), inside plaster 12mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) finished with a floating coat of neat cement, C.C. floor, RCC slab in mix 1:2:4 and RCC baffle wall including reinforcement, centering and shuttering etc. and SFRC manhole cover and frame 610 x 455 mm heavy duty HD 10 conforming to IS: 12592 complete in all respects as per drawing and direction of Engineer in charge .

Constructing Brick masonry percolation pit 3m dia and 5m deep with bricks of class designation 7.5 in cement mortar 1:6, base concrete 1:3:6 below the brick wall, including cost of necessary excavation in any type of soil, back filling as required in 20cm thick layers, dewatering if any, shuttering and shoring and disposal of surplus excavated material within the plot. 2 nos. 300mm dia borings to a depth of 50 metre (to be measured from the bottom of the percolation pit), provisioning and fixing 160 O.D. PVC pipes, tested to 6kg/sqcm, in each bore and upto the height of 300mm above the RCC top slab. The PVC pipe shall be slotted except 3.0 metres at the top and 3.0 metres below from the bottom of the percolation pit, which shall be blind. Top of the PVC pipe shall be covered with PVC Socket and plug. Each bore around the PVC pipe shall be filled with pea gravels. The percolation pit shall be filled with river stone/pebbles as per drawing and direction of Engineer in charge.

Providing and fixing in position CI grating over surface drain complete as required for the following sizes :- for 30 cm wide drain sleeve size 75cm x 60cm and 7cm thick

Pump Capacity 60 lpm, at 35 m head (1 Working plus 1 Stand-by) Filter Feed Pumps. (for Dom. Use)

Pump Capacity 30 lpm, at 35m head (1 Working plus 1 Stand-by) Garden Hydrant Pump.

Pump Capacity 90 lpm, at 55m head (1 Working plus 1 Stand-by) Domestic Water Supply

Supply, installation, testing and commissioning of vertical self supporting Dual Media Filter (DMF) fabricated from FRP as per IS : 2825, ASMI code, complete with pressure gauges at inlet and outlet, sample cock, PVC face piping with ABS multiport valves and all accessories, with initial charge of filter media for Dual media filter with multi grade quartz sand and anthracite, lining inside with PP and FRP wounded outside, testing and commissioning complete. Capacity : 60 Lpm ,Filtration rate : 18-20 M³/M²/hr, Max. operating pressure : 3.5 Kg/Sq.cm, Test pressure : 5.5 Kg/Sq.cm, Suggested Diameter : 1600 mm

Supply, installation, testing and commissioning of vertical self supporting Activated Carbon Filter (ACF) fabricated from FRP as per IS : 2825, ASMI code, complete with pressure gauges at inlet and outlet, sample cock, PVC face piping with ABS multiport valves and all accessories, with initial charge of filter media for activated carbon filter, lining inside with PP and FRP wounded outside, testing and commissioning complete. Capacity : 60 LPM ,,Filtration rate : 15-17 M³/M²/hr ,,Max. operating pressure : 3.5 kg/Sq.cm,,Test pressure : 5.5 Kg/Sq.cm

Supply, assembly, erection, testing and commissioning of SS / CI submersible non-clog pumps, suitable to handle basement drainage having the following capacities with vortex impeller / grinder type, complete with 3 phase squirrel cage submersible motor of required HP for 415 ± 10% volts, 3 phase, 50 Hz. A.C. supply cooled by surrounding liquid, submersible cable upto main panel within the plant room, dry running preventor, G.I. guide pulling chain, all the necessary piping and accessories, valves, delivery header etc. as required complete in all respects. The rate will include electrical panel with cyclic operation as supplied by the manufacturers) The above installation shall be complete with sump pump lifting assembly, ready made electro – galvanized MS lifting chain, GI pipe header complete with discharge manifold, flanges, tee, elbow etc. complete including GI pipe upto the top of sump and including GI union. Header shall be sized for both pump working under delivery velocity of 1.5 m/sec.Capacity of 120 lpm against a total head of 18 m (solid handling 10-12 mm) ( pump room and Basement Drainage sump) (1 Working plus 1 Stand by) (SS / CI Body and SS / CI Impeller and shaft)

Supplying, assembly, erection, testing and commissioning of magnetic level sensors and controllers, CPVC probe tube, PP actuating float and all other equipment required for the performance of the system to the satisfaction of the engineer in charge complete including providing and fixing wiring from control junction box near the UG tank to probes of required length, interconnection wiring between level controller and the concerned contactor in the starter panel as required. The level controller will perform the following functions. To switch on the pumps (including raw water pumps (Domestic Water Treatment, Softening Plant etc.) when the level of water in the supply water tank is low and to cut off the pump when the level in the receiving water tank is high and switch off the pumps when the level of water in the supply water tank is low. The Contractor will include all the under ground and over head tanks and all the pumps as required for level control in this item

Providing, fixing, jointing and testing in position the following heavy class G.I. pipes conforming to IS:1239 cut to required lengths including all necessary fittings (conforming to IS:1879) and specials such as bends, tees, unions, reducers, flanges and plugs etc. fixing at wall/ceiling level supported by clamps, hangers etc, (to be galvanized after fabrication) cutting hole in wall/floor/slab and making good the same good with cement concrete 1:2:4 / fire sealant complete as required. 40 mm dia

Providing, fixing, jointing and testing in position the following heavy class G.I. pipes conforming to IS:1239 cut to required lengths including all necessary fittings (conforming to IS:1879) and specials such as bends, tees, unions, reducers, flanges and plugs etc. fixing at wall/ceiling level supported by clamps, hangers etc, (to be galvanized after fabrication) cutting hole in wall/floor/slab and making good the same good with cement concrete 1:2:4 / fire sealant complete as required. 50 mm dia

Providing, fixing, jointing and testing in position the following heavy class G.I. pipes conforming to IS:1239 cut to required lengths including all necessary fittings (conforming to IS:1879) and specials such as bends, tees, unions, reducers, flanges and plugs etc. fixing at wall/ceiling level supported by clamps, hangers etc, (to be galvanized after fabrication) cutting hole in wall/floor/slab and making good the same good with cement concrete 1:2:4 / fire sealant complete as required. 65 mm dia

Providing, fixing, jointing and testing in position the following heavy class G.I. pipes conforming to IS:1239 cut to required lengths including all necessary fittings (conforming to IS:1879) and specials such as bends, tees, unions, reducers, flanges and plugs etc. fixing at wall/ceiling level supported by clamps, hangers etc, (to be galvanized after fabrication) cutting hole in wall/floor/slab and making good the same good with cement concrete 1:2:4 / fire sealant complete as required. 80 mm dia

Providing two coats of Synthetic enamel paint of approved shade on pipes and supports as per pipe colour code over a coat of primer. Including painting of legends with direction arrow as per the approval of the Consultants / Project Manager. 40 mm dia

Providing two coats of Synthetic enamel paint of approved shade on pipes and supports as per pipe colour code over a coat of primer. Including painting of legends with direction arrow as per the approval of the Consultants / Project Manager. 50 mm dia

Providing two coats of Synthetic enamel paint of approved shade on pipes and supports as per pipe colour code over a coat of primer. Including painting of legends with direction arrow as per the approval of the Consultants / Project Manager. 65 mm dia

Providing two coats of Synthetic enamel paint of approved shade on pipes and supports as per pipe colour code over a coat of primer. Including painting of legends with direction arrow as per the approval of the Consultants / Project Manager. 80 mm dia

Supply, installation, testing and commissioning of tanker inlet connection complete with 80 mm dia MS inlet piping, hose inlet connection, MS cabinet enclosure (epoxy painted after fabrication), pad locking arrangement, inlet flexible hose complete with all necessary arrangement.

Providing and fixing in position Vane Type mechanical water flow meter for following pipe size

Fabrication, Supplying, Installation, Testing and Commissioning of Electrical Plumbing Motor Control Panel of cubical construction, floor mounted type, fabricated out of 2mm. thick CRCA sheet, compartmentalized with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with solid aluminium strip / single core PVC insulated FRLS copper conductor cable, having suitable mountings for switchgears and accessories and internal control and power wiring with suitable rating PVC insulated FRLS copper conductor, earth terminals, numbering etc. complete in all respects, suitable for operation on 415 V, 3 phase 50 HZ AC supply with enclosure protection class IP 42 with 500 Amp aluminium bus bar etc complete as required with required incoming and out goings, cable, cable trays etc.

Fabricating, Supplying, Installation, Testing and Commissioning Air Vessel of continuous welded construction with flanged discharge header in pump house fabricated out of 10 mm thick dished ends and 8 mm thick MS sheet, Air Release Valve, complete with drain arrangement with 25 mm dia gun metal wheel valve complete with all accessories etc. as required of the following sizes: 2 Meter high and 450 mm dia suitable to operate Jockey Pump, Main Fire Pump and Diesel Engine Driven Fire Pump.

Supply, Installation, Testing and Commissioning of 100 mm dia Bourden type, Stainless Steel dial type Pressure Gauge including brass isolation valve and siphon pipe having calibration of 0 - 16 Kg / cm2 .

Providing and fixing double flanged Rubber expansion bellow with M.S. fixed flanges (PN-1.6) joint (suitable for system test pressure) of standard length as per manufacturers specs including rubber gaskets, flanges, nuts, bolts and washers complete as required as per specifications. 150 mm dia

Providing laying, testing and commissioning of `C` class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 150 mm dia

Providing laying, testing and commissioning of `C` class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 100 mm dia

Supplying and Fixing of Fire Man`s axe with heavy insulated rubber as per standard conforming to IS 926.

SITC weather proof M.S Door and glass fire door size 2100 mm x 900 mm or as per arch. Supplying, installation, testing and commissioning of weather proof M.S door and glass fire door size 2100 mm x 900mm fabricated from 1.6mm thick M.S. sheets and M.S angle 40mmx40mmx6mm complete with glass, locking arrangements to accommodate the following: - a) Gunmetal single headed Hydrant valve - 1 No. b) Fire Hoses 63mm, 15 M long with accessories - 2 Nos. c) Short branch - 1 No. d) First Aid hose Reel - 1 No. e) Fire Extinguisher - 2 Nos. f) Fireman`s Axe - 1 No. g) Pressure Gauge - 1 No. The cabinet shall be painted with one coat of primer and 2 coats of synthetic enamel paint of approved shade.

SITC weather proof M.S Door and glass fire door size 750 mm x 600 x 250mm or as per arch. Supplying, installation, testing and commissioning of weather proof M.S door and glass fire door size 750 mm x 600 x 250mm fabricated from 1.6mm thick M.S. sheets and M.S angle complete with glass, locking arrangements to accommodate the following: - a) Fire Hoses 63mm, 15 M long with accessories - 2 Nos. b) Short branch - 1 No. c) Fireman`s Axe - 1 No. The cabinet shall be painted with one coat of primer and 2 coats of synthetic enamel paint of approved shade.

Providing and fixing 25 mm dia inspecting and testing assembly with gunmetal isolation valve, gunmetal sight glass, bypass valve and connected to drain line complete (including the cost of drain pipe).

Providing and fixing fire extinguisher of carbon dioxide type consisting of brand new high pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives Nagpur, wheel type valve bearing IS:3224 mark internal discharge tube, 1 meter long high pressure discharge hose, non conducting horn, suspension bracket, fully charged bearing IS: making fixed to wall as directed. 4.5kg capacity cylinder.

Providing and fixing fire extinguisher of carbon dioxide type consisting of brand new high pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives Nagpur, wheel type valve bearing IS:3224 mark internal discharge tube, 1 meter long high pressure discharge hose, non conducting horn, suspension bracket, fully charged bearing IS: making fixed to wall as directed. ABC type extinguisher with cylinder fully charged with 6 Kg. capacity.

3 core x 35 Sq.mm. Aluminium Armoured

3 core x 10Sq.mm. Aluminium Armoured

Recessed round panel light-Areva Prime, 9 watt, Gents and ladies Toilet, All Toilet Area supply and installation

Recessed round panel light-Areva Prime, 15 watt in store , suppy and installation

Recessed COB Downlight-Eris swivel, 12 watt, VIP lounge, supply and installation

LED Batten-Glaze , 20 watt, in parking area supply and installation

Highbay Light, 120 watt, Badminton and basketball area supply and installation

IP65 Batten Light-Pride, Squash Court and Passage, Healthcare Center 40 watts, supply and installation

Recessed 2` x 2` Panel-Ultima Slim, 36 watt in Circulation Area, Shooting and Waiting lane, Waiting Lounge, Chess and Carrom, GYM and GYMNASTIC, Sitting area,TT Court -01 to 05, WAITING LOUNGE, ZUMBA AREA supply and installation

Supply,Installation, testing and commissioning of 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, complete with all accessories similar to Havells model Pacer/Havells/Usha /Orient )

Supply of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

3.5cx300 sq.mm. Al Ar. XLPE cable

3.5cx240 sq.mm. Al Ar. XLPE cable

3.5cx185sq.mm. Al Ar. XLPE cable

3.5cx150 sq.mm. Al Ar. XLPE cable

3.5cx95 sq.mm. Al Ar. XLPE cable

3.5cx50 sq.mm. Al Ar. XLPE cable

3.5cx35 sq.mm. Al Ar. XLPE cable

4cx16 sq.mm. Al Ar. XLPE cable

4cx25 sq.mm. Al Ar. XLPE cable

Providing and fixing 6.00 mm dia copper wire on surface or in recess for loop earthing as required.

Providing and fixing 10.00 mm dia copper wire on surface or in recess for loop earthing as required.

Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.

Providing and fixing 32 mm x 6mm G.I. strip on surface or in recess for connections etc. as required with all labour and material.

Providing and fixing 50mm x 6mm G.I. strip on surface or in recess for connections etc. as required with all labour and material.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/sweating and soldering etc. as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required.(For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.

All the rates quoted by the contractor shall be complete finished work including cost of all labour, material, scaffolding, finishing as required with tools, plants, lead, lift, taxes, tollage, octroi, royalties etc. except those specially excluded in the description of the individual items. All works shall be executed as per drawings, specification and instructions of Project Manager and shall include the supply and installation at site of all the equipment, ancillary materials as specified and all such items what-so-ever which may be required to fulfill the intent and purpose as laid down in the specification and/or the drawings. All materials shall be as per ISI specification and with IS certification marked wherever applicable. The material shall be duly approved by Engineer Incharge before incorporation in the actual work. Supply of online load sharing 15 KVA UPS system of following ratings with computer communication possibilities consisting of standard software, double conversion system suitable for providing power supply to computers/servers sports lighting, corridor lighting delivery atleast 30 minutes backup, suitable for incoming 415 volts, 3phase plus 10% -15%, 50Hz supply and three phase output voltage, including, rectifier/dual converter, bypass switch, inverter, filter. Bypass and static transfer switch for automatic switch over, providing static bypass module, high switching frequency microprocessor based with built-in technical protections like short circuits, over load, high / low voltage cut off protection of load from source inclusive of bypass facility without giving any break of power, maintenance bypass switch. The UPS should have IGBT based rectifier and IGBT based inverter. The UPS should also give minimum )90% efficiency at 50% load. Microprocessor/ software controlled annunciation, protection (including against input phase reversal), and menu run diagnostic module, associated cabling, connections, termination, erection including associated foundation/ masonry or RCC work for mounting on base channels etc. complete as required and as per specifications. Providing and Fixing of VRLA Battery Banks and BCB consisting of 12V,Cells SMF Type suitable for UPS System for minimum 30 mins backup for individual UPS. Note :- There shall be 2Nos 15 KVA UPS which will work in Parallel Hot Redundant Mode)

Installation, Testing and Commissioning of online load sharing 15 KVA UPS

Supply,Installation, Testing and Commissioning of dust, damp and vermin proof free floor /wall mounted, Indoor/outdoor type factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415 ±10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning and finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium bus bars, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. and 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage and current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections and indications and mounted with the following switch gears etc. complete as required. Supply, Installation, Testing and Commissioning of Main LT Panel with D.G Sync Panel as per detail design and sld.

Supply,Installation, Testing and Commissioning of dust, damp and vermin proof free floor /wall mounted, Indoor/outdoor type factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415 ±10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning and finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium bus bars, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. and 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage and current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections and indications and mounted with the following switch gears etc. complete as required. Supply,Installation, Testing and Commissioning of floor distribution panel as per detail design and sld.

Supply,Installation, Testing and Commissioning of dust, damp and vermin proof free floor /wall mounted, Indoor/outdoor type factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415 ±10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning and finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium bus bars, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. and 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage and current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections and indications and mounted with the following switch gears etc. complete as required. Supply,Installation, Testing and Commissioning of UPS Input Panel as per detail design and sld.

Supply,Installation, Testing and Commissioning of dust, damp and vermin proof free floor /wall mounted, Indoor/outdoor type factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415 ±10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning and finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium bus bars, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. and 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage and current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections and indications and mounted with the following switch gears etc. complete as required.Supply,Installation, Testing and Commissioning of UPS Output Panel as per detail design and sld.

Supply,Installation, Testing and Commissioning of ventilation / Pressurization Panel along with starter / vfd as per detail design and sld.

Supply,Installation, Testing and Commissioning of dust, damp and vermin proof free floor /wall mounted, Indoor/outdoor type factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415 ±10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning and finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium bus bars, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. and 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage and current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections and indications and mounted with the following switch gears etc. complete as required. Supply,Installation, Testing and Commissioning of lift panel as per detail design and sld.

Supply,Installation, Testing and Commissioning of dust, damp and vermin proof free floor /wall mounted, Indoor/outdoor type factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415 ±10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning and finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium bus bars, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. and 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage and current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections and indications and mounted with the following switch gears etc. complete as required.Supply,Installation, Testing and Commissioning of External light panel along with timer as per detail design and sld.

Supply,Installation, Testing and Commissioning of dust, damp and vermin proof free floor /wall mounted, Indoor/outdoor type factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415 ±10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning and finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium bus bars, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. and 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage and current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections and indications and mounted with the following switch gears etc. complete as required. Supply, Installation, Testing and Commissioning of outdoor type hvac panel as per detail design and sld.

Supply,Installation, Testing and Commissioning of dust, damp and vermin proof free floor /wall mounted, Indoor/outdoor type factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415 ±10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning and finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium bus bars, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. and 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage and current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections and indications and mounted with the following switch gears etc. complete as required. Supply,Installation, Testing and Commissioning of Plumbing panel as per detail design and sld.

Supply,Installation, Testing and Commissioning of dust, damp and vermin proof free floor /wall mounted, Indoor/outdoor type factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415 ±10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning and finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium bus bars, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. and 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage and current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections and indications and mounted with the following switch gears etc. complete as required Supply,Installation, Testing and Commissioning of fire fighting panel as per detail design and sld.

Supply,Installation, Testing and Commissioning of dust, damp and vermin proof free floor /wall mounted, Indoor/outdoor type factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415 ±10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning and finishing complete with 7 tank process for powder coating in approved shade, complete with Aluminium bus bars, inter-connection with copper conductor wires / aluminium strips, neutral links, earth bus etc. including control wiring with 1.5sqmm. and 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage and current respectively, cable alleys, cable gland plates in two half, etc. necessary metering protections and indications and mounted with the following switch gears etc. complete as required. Supply,Installation, Testing and Commissioning of 190 KVAR capacitor panel as per detail design and sld.

Supply, laying, testing and commissioning of 11KV(E) 3C x 240mm alm arm XLPE cable conforming to IS 7098 II in concrete trench, hume pipe ,direct buried in ground and partially on MS tray structure. (Excavation,laying sand cushion,brick protection and refilling the trench will be part of this item).

Supplying, fixing, testing and commissioning of indoor heat shrink or 3M cold shrink type terminations for 3C x 240 sqmm alm arm XLPE 11KV(E) cable conforming to class I termination.

Supplying, Assembling, Transportation of 500 KVA 11KV/.433KV, Dyn11-Delta Star, 3phase 50Hz, natural Oil Cooled, Copper wound, Pole Mounted distribution transformer with OFF Circuit Tap Changer, Suitable for Outdoor installation complete with all modern fittings as required. including, suitable weatherproof boxes on both the ends for cable entry at HT side (suitable for 3cx240 sq mm Al Ar. XLPE Cable )and at LT side (suitable for 4RX3.5C X300 SQ MM AL.AR. XLPE Cable) , disconnecting chamber on both sides, earthing terminals, diagram and rating plate, explosion vent, OFF load tap changer ( plus 5% and -10%) @ of 2.5% steps etc., complete as required.

The system shall be deemed complete, only when integrated system testing with fully functional BMS monitoring and controls are demonstrated and certified by BMS consultant. Supply,Unloading, shifting,erection, testing and commissioning of 500 KVA DG with canopy meeting polution control board norms of 25 db insertion of sound level and engine shall have controller coupled to alternator. Alternator shall deliver full output at 50 degree C, shall have inbuilt BTD and winding temp. detector along with space heaters. Necessary REF protection shall be provided with separate earth fault CTs shall be inbuilt inside alternator box. All engine shall be suitable for paralleling and equipments like QDCT etc. shall be inbuilt to make smooth synchronising. Base frame and DG shall have air coil cooler. DG shall be suitable for paralleling with other make engines. Gerb/cummins make antivibration pads.Day tank 99o ltr of min 3mm thick for fuel with level markings inside/outside canopy. All lockable doors having brass handles..Front shall have perspex sheet to indicate fuel guage and ECP Panel along with one emergency push button out side canopy.Fuel piping from internal tank shall be brought O/side canopy and connected from external buffer tank through gravity feed.Canopy to have required size blower for cooling as well as air combustion.(Calculation for blower shall be submitted along with drawing).This should not be fed power from alternator output and power should come from auxiliary panel.Canopy temperature shall not rise beyond 70 C above ambient and necessary temperature gauges will be installed inside canopy. Provision in the canopy for taking out silencer, control cables and power cables and sealing of balance opening space. Suitable self priming pump with engine (if inbuilt by the manufacturer). DG shall be completely filled with luboil and internal HSD day tank shall be completely filled. for commissioning and trial run for 12 hrs on full load and load bank shall be arranged by vendor. Obtaining necessary approvals from the chief electrical inspectorate and the state pollution board, if required for electrical safety and pollution norms etc.The DG shall have necessary generator control module/controller, converters and software suitable for these DGs. This item shall be complete in every way with RS 485.The vendor to show the parameters on the MODSCAN software before integrating to IBMS. All mapping details and the Master/slave ID setting in the DG Processor Panel to be done by the DG vendor to communicate to BMS.

Supply, installation, testing, termination and Commisioning of Control Cables for 2 DG`s from each DG to DG Panel, control cables from RTD and BTD, voltage sensing control cable from mains, shielded cable from DG to DG for synch purpose, load sharing, Controller to DG sync cables, auto / manual switch status control cable, breaker ON/OFF status control cable to PLC, blower and coil cooler fan feedback to PLC, signal from PLC to start blower and coil cooler fan,level controller cables to starter, complete control cables as required for successful commisioning. (Avg. distance between DG to DG sync. panel shall be appx 60 mtrs).

Supply, laying of MS ERW pipe 4.85mm thick MS Piping for 500kVA D.G. Sets for Exhaust including providing suitable bends, reducers and supporting arrangement at suitable intervals, painting etc. as required.

Supply, testing and commissioning of 75mm thick Rockwool insulation (of 150 kg per cubic meter density) around the exhaust pipes including cladding with aluminium sheet of 26SWG and covering from outside complete as required suitable for DG exhaust pipe temperature upto 450°C.

Supply, testing and commissioning of 75mm thick Rockwool insulation (of 150 kg per cubic meter density) around the silencer pipes including cladding with aluminium sheet of 26SWG and covering from outside complete as required suitable for DG exhaust pipe temperature upto 450°C.

Supply and installation of day oil tank of 990 liter capacity fabricated out of 2.5mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with M.S. class `C` pipe of suitable dia complete with valves,level indications and accessories as required as per specification.

Providing and fixing MS C class fuel piping from day oil tank to engines, inter connecting piping between the tanks,main piping from outside for tanks filling complete with bends and shut off valves as required : 25 mm dia pipe

Providing and fixing MS C class fuel piping from day oil tank to engines, inter connecting piping between the tanks,main piping from outside for tanks filling complete with bends and shut off valves as required : 50 mm dia pipe

Providing and fixing MS C class fuel piping from day oil tank to engines, inter connecting piping between the tanks,main piping from outside for tanks filling complete with bends and shut off valves as required : 25 mm dia gate valve

Providing and fixing MS C class fuel piping from day oil tank to engines, inter connecting piping between the tanks,main piping from outside for tanks filling complete with bends and shut off valves as required : 50 mm dia gate valve

Providing and fixing MS C class fuel piping from day oil tank to engines, inter connecting piping between the tanks,main piping from outside for tanks filling complete with bends and shut off valves as required : Fuel Level sensor for PLC

Supply,Unloading, shifting,erection, testing and commissioning of 125 KVA DG with canopy meeting polution control board norms of 25 db insertion of sound level and engine shall have controller coupled to alternator. Alternator shall deliver full output at 50 degree C, shall have inbuilt BTD and winding temp. detector along with space heaters. Necessary REF protection shall be provided with separate earth fault CTs shall be inbuilt inside alternator box. All engine shall be suitable for paralleling and equipments like QDCT etc. shall be inbuilt to make smooth synchronising. Base frame and DG shall have air coil cooler. DG shall be suitable for paralleling with other make engines.Gerb/cummins make antivibration pads.Day tank 99o ltr of min 3mm thick for fuel with level markings inside/outside canopy All lockable doors having brass handles.Front shall have perspex sheet to indicate fuel guage and ECP Panel along with one emergency push button out side canopy. Fuel piping from internal tank shall be brought O/side canopy and connected from external buffer tank through gravity feed. Canopy to have required size blower for cooling as well as air combustion.(Calculation for blower shall be submitted along with drawing).This should not be fed power from alternator output and power should come from auxiliary panel. Provision in the canopy for taking out silencer, control cables and power cables and sealing of balance opening space. Suitable self priming pump with engine (if inbuilt by the manufacturer). 250A 4P MCCB with releases in built with in the DG canopy for local isolation purpose and this should be internally connected to alternator through single core copper cables to isolator. Obtaining necessary approvals from the chief electrical inspectorate and the state pollution board, if required for electrical safety and pollution norms etc. The DG shall have necessary generator control module/controller, converters and software suitable for these DGs. This item shall be complete in every way with RS 485.The vendor to show the parameters on the MODSCAN software before integrating to IBMS. All mapping details and the Master/slave ID setting in the DG Processor Panel to be done by the DG vendor to communicate to BMS.

Supply, laying of MS ERW pipe 4.85mm thick MS Piping for 125kVA D.G. Sets for Exhaust including providing suitable bends, reducers and supporting arrangement at suitable intervals, painting etc. as required.

Supplying and fixing of IP 65 60 WATT LED Light fixture. The Fixture shall be of aluminium die cast housing, suitable polycarbonate diffuser, driver etc, complete in all respects as required.

Supply, installation, testing and commissioning of UL / FM / VDS Approved Networkable Analogue Addressable Type Fire Alarm Control Panel with min 640 Character / 240X64 / 5.5” graphic LCD display. The panel should be equipped with sufficient numbers of loop with 10% spare capacity, The Fire Alarm Control Panel shall have SLC with capacity of min 126 Devices per loop in any combination with key pad, dual flash-based microprocessor technology, inbuilt USB Port for upload and down load the configuration tools, RS232 serial port for direct PC or modem connection, inbuilt NAC`s, min 20 programmable Zonal LEDs and operates on 240V AC plus 10% with 50 Hz with built in charger. The panel shall have fire, fault relays, Option for BMS integration MODBUS/ BACKNET, graphical software for provision of TCP/ IP modules, Remote Access, provision of both class `A` and class `B` wiring in the SLC circuit, user friendly with communication facility to monitor and control the FACPs from a single window. The panel shall be suitable for minimum of 5000 event record facility. The Panel shall be Seamless Integrated with Digital Voice Evacuation system having In-built Factory Fitted Amplifier with all other accessories required to successfully run the system. (The System cost shall be included of all necessary cards, modules, Panel enclosure, CPU and associated accessories to complete the system design). The panel shall be compatible for IBMS system with open protocol BACnet / Modbus over IP complete as per specifications.Panel Should have Min 16 Zone Controller with seamless integration facility with main fire alarm panel for voice evacuation complete as required.Panel Should have Voice command keypad with microphone for Voice evacuation system assembly complete as required.4 Loops Panel With Integrated Digital Voice Evacuation system. (For Upto 250 plus Addressable devices per nod) with Network Card. The Panel Should have 25/70 VRMS amplifier Min of 80 Watt complete as required.

Supplying, installation, testing and commissioning of Repeater Panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete with battery, battery charger and other accessories as per Main Fire Alarm Panel as required.

Supply, installion, testing and commissioning of UL / FM / VDS Approved Analogue Addressable Multisensor with inbuilt isolator having three sensors One Optical and Dual Heat Sensor (Static and ROR both), It shall have multiple modes with min five different optical sensitivity adjustment from 1.2 - 2.1 %/ft and to be possible to configure the detector to work in any of the modes such as only optical type or only heat type or combined type. 360° Visible Tri-coloured led for Normal, Fault and alarm condition, addressing shall be by means of both Soft addressing or Hard Addressing like dip switches or decade switches or suitable address cards. It shall have Compensation to drift and transient rejection, having IP44 rating and approved to operate in 0°C to plus 55°C temperature, It shall be possible to insert and remove detectors by a single push twist movement, base shall have special locking tool feature to prevent loosening of detector on its own. (For Detectors/Device without inbuilt isolator, Fault Isolator module to be provided with each detector/device). Make-Advanced/Apollo/Mircom/Secutron/Honeywell-Gamewell.

Supplying, installation, testing and commissioning of Response Indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing and commissioning of intelligent addressable programmable sounder complete as required.

Supply, Installation, Testing and Commissioning of fault isolator for isolating shorted, dewired and loose circuit between to successive fault isolator with automatic resetting arrangement including base etc as per complete as required.

Supplying, installation, testing and commissioning of intelligent addressable thermal detector with rate of rise cum fixed temperature thermistor complete with base as required.

Supplying, installation, testing and commissioning of addressable fire control module complete as required.

Supply, Installation, Testing and Commissioning of Intelligent addressable Manual Call Point / Pull station break glass type with alarm LED as detailed complete as required.

Supplying, installation, testing and commissioning of addressable horn cum strobe complete as required.

Supplying, installation, testing and commissioning of fire fighter telephone handset complete as required.

Supplying, installation, testing and commissioning of fire fighter phone jack complete as required.

Supplying, assembly, erection, testing and commissioning of addressable Input Monitor Module complete as required.

Supplying and laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring and LSZH outer sheath complete as required.

Supply and fixing of UL / FM / VDS approved Fire Panel Supervised Voice Evacuation Speaker with 25 and 70 volt line matching transformers and include output power taps of 1/4, 1/2, 1 and 2 watt(s). High dBA output (over 90 dBA at 10 feet @ 2 watts) with moulded terminal block connection and equipped with a ground wire and frequency response of 400 to 4000Hz for Voice Evacuation with suitable rating amplifiers with Fire alarm panel including back box for wall mount.

Supply and fixing of wall mounted speaker

Supply, Installation, testing and commissioning of 4 Megapixel Vandal-resistant Vari focal Dome Camera Ultra H.265 (UL Listed) Progressive scan CMOS, IR-cut filter with auto switch (ICR), 1280x960:30fps, Ultra H.265, H.265, H.264, MJPEG, DC12V and PoE, Weather proof IP67 Protection, Vari-focal lens 2.8 ~ 12mm@ F1.6, Colour: 0.001Lux (F1.6, AGC ON) 0Lux with IR, IR range: up to 30m, IR anti-reflection window, 3-Axis, 2D/3D DNR (Digital Noise Reduction), Digital Defog, Highlight Compensation (HLC), BLC, OSD, Region of intrest, Privacy Masking, Two-way audio Supported, Wide temperature range: -30°C to 60°C (-22°F to 140°F), Edge Storage: Micro SD (up to 256GB), ONVIF (Profile S, Profile G, Profile T). Make : UNV, Milesight, Honeywell (UL Listed).

Supply, Installation, testing and commissioning of 4Megapixel IP-67 Vari focal Bullet Camera Ultra H.265 (UL Listed) Progressive scan CMOS, IR-cut filter with auto switch (ICR), 1280x960:30fps, Ultra H.265, H.265, H.264, MJPEG, DC12V and PoE, Weather proof IP67 Protection, Vari-focal lens 2.8 ~ 12mm@ F1.6, Colour: 0.001Lux (F1.6, AGC ON) 0Lux with IR, IR range: up to 30m, IR anti-reflection window, 3-Axis, 2D/3D DNR (Digital Noise Reduction), Digital Defog, Highlight Compensation (HLC), BLC, OSD, Region of intrest, Privacy Masking, Two-way audio Supported, Wide temperature range: -30°C to 60°C (-22°F to 140°F), Edge Storage: Micro SD (up to 256GB), ONVIF (Profile S, Profile G, Profile T). Make : UNV, Milesight, Honeywell (UL Listed).

Supply, Installation, testing and commissioning of 4K H.265 plus UHD 65 CHANNELS PROFESSIONAL NVR (UL Listed) 64 IP channels with 320 Mbps incoming bandwidth Having 4 Slots of 10 TB each HDD (Total 40 TB space) Dual LAN interfaces for three network working modes Multi-address/Load Balance/Net Fault-tolerance • Leading-edge Ultra H.265 Compression • Multiple Streams:- Ultra H.265/H.265(HEVC)/H.264 plus /H.264/MJPEG • Up to 12 Megapixels resolution recording • Support 4K Resolution (UHD) • Support Dual Monitor Display • Support Dual LAN Interfaces for multiple working mode • 2* HDMI port and 2* VGA Port • 2* 100/1000 mbps port • 1*eSATA interface • RAID 0/1/5/6/10 Supported • 1* USB 3.0 Interface • 2* USB 2.0 Interfaces • 1* RCA Audio input • 2* RCA Audio Output Make : UNV, Milesight, Honeywell (UL Listed).

Supply, Installation, testing and commissioning of 10 TB WD Survillance Hard Disk Drive. Make : WD, Seagate, Toshiba.

10 Port Network Switch with lightning protection 6000v Support 8 Port PoE plus 2 Port Giga Uplink with Extended upto 250M Switch. (Make : Cisco,D-Link, True View, Syrotech.)

18 Port Network Switch with lightning protection 6000v Support 16 Port PoE plus 2 Port Giga Uplink with Extended upto 250M Switch (Make : Cisco,D-Link, True View, Syrotech.)

Supply, Installation, testing and commissioning of 27 U Rack Server Rack Floor Mounted.

Supply, Installation of Connector RJ 45. Make : D-Link/AMP

Supply, Installation of LED TV 49` UHD 4K Display. Make : TCL/LG/Samsung

Supply, Installation of HDMI Cable 5 Mtr

Supply, Installation of PVC Box for Camera

Supplying, installation, testing and commissioning of electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required. Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520.(Common For Sprinkler and Nozzle System),Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS-325.M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered with anti vibration pads. 2280 lpm at 70 m Head.

Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.,Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required,M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.2280 lpm at 70 m Head.

Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump),Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.,,Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS : 325.,M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered and with anti vibration pads., 180 lpm at 70 m Head

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.

Providing and fixing of pressure switches in MS pipe line including connection extra as required.

ation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 200 mm dia

Supplying, fixing, testing and commissioning of double flanged sluice valve of PN 1.6 rating with non rising spindle ,bronze/ gun metal seat,ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 780 of following sizes as required. 200 mm dia

Supplying, fixing, testing and commissioning of double flanged sluice valve of PN 1.6 rating with non rising spindle ,bronze/ gun metal seat,ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 780 of following sizes as required. 150 mm dia

Supplying, fixing, testing and commissioning of double flanged sluice valve of PN 1.6 rating with non rising spindle ,bronze/ gun metal seat,ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 780 of following sizes as required 80 mm dia

Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications. 50 mm dia

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 150 mm dia

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 mm dia

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80 mm dia

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 25 mm dia

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required Single headed Stainless steel

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Stainless Steel (Grade 304)

Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :Stainless Steel (Grade 304)

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. ,20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585,20 mm nominal internal dia gun metal globe valve and nozzle.,Drum and brackets for fixing the equipmets on wall.,Connections from riser with 25 mm dia stop gun metal valve and M.S. Pipe and socket. 30m

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 2 way-100 mm dia M.S. Pipe

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 4 way-150 mm dia M.S. Pipe

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :150 mm dia pipe

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :100 mm dia pipe

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :80 mm dia pipe

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :65 mm dia pipe

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :50 mm dia pipe

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :40 mm dia pipe

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :32 mm dia pipe

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :25 mm dia pipe

Providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : 150 mm dia

Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler

Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Upright Sprinkler

Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Side wall

Supplying, installation, testing and commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. 1200 mm

Providing and fixing flow switch in following sizes M.S. pipe including connection etc as required. 150mm dia

Fabricating and Installing following size of perforated Hot dip G.I cable tray including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and including painting etc. as required. 300 mm width x 50 mm depth x 1.6 mm thickness

Fabricating and Installing following size of perforated Hot dip G.I cable tray including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and including painting etc. as required. 150 mm width x 50 mm depth x 1.6 mm thickness

4 core x 2.5 Sq mm copper conductor armoured control cable.

3 core x 10Sq.mm. Aluminum Armored

Providing and fixing following size of GI strips/ GI wire etc. on surface or in recess for connections, including GI clamps etc. as required. 25 mm x 5 mm GI strip

Providing and fixing following size of GI strips/ GI wire etc. on surface or in recess for connections, including GI clamps etc. as required. 6 SWG dia GI wire

· FRAME:- Main Frame made of 4’’ X 2’’ Square pipe heavy Duty with Powder Coated . Let pull down -100 Kgs Seated Rowing -100 Kgs Pec . Dec -75 Kgs Leg Curl and Leg Extension -60 Kgs Leg Press -100 Kgs Chest press -100 Kgs Shoulder Press -100 Kgs Arm curl -60 Kgs Squat Press Bench press Wrist curl -60 Kgs Hyper Extension Roman Chair Chining bar Twister Hip Flexor AB board Dipping Bicep Curl Push up

COMMERCIAL TREADMILL :- AC driving system with adjustable variable frequency 5.0 HP AC continuous (10.0 HP Peak) motor. Speed: 0.8~25km/h Elevation: 0 ~ 20% Drive Motor: 5.5 HP AC Treadmill Duty Drive Control: Hybrid Control Running Surface: W 560 x L 1600 (mm) With USB charger. Heavy duty reliable 2 ply commercial grade orthopedic running belt Large sized twin cup holder with a built-in tray. High speed O² generator. Emergency stop button. Sweat proof console design. Maximum User Weight : 160-180 Kgs.

COMMERCIAL ELLIPTICAL TRAINER :- CONSOLE7.5” Blue Backlit LCD with muscle profile display, target heart rate display, swivel fan, reading rack, and integrated speakers CONSOLE FEEDBACKTime, Resistance Level, Stride Length, Distance, Calories, RPM, Segment Time, Program Name, Watts, Laps, Speed, and Heart Rate HEART RATEContact and Telemetric, (Heart Rate Strap Not Included) RESISTANCE20 Levels DRIVE TRAINEMS POWERPlug-In, 120V FLYWHEEL SYSTEM30 lbs. STRIDE LENGTHElectronically Adjustable 18` - 24` (.5` increments) FRAMECommercial-Grade Structural Steel w/ durable Powder-Coat Paint DIMENSIONS84` x 32` x 70` PRODUCT WEIGHT265 lbs. MAXIMUM USER WEIGHT400 lbs.Misc.: Turbo Cooling Fan

COMMERCIAL RECUMBENT BIKE :- Easy – To – Use console with 40 Resistance levels Easy – To – Adjust 12-Position Aluminum Seat Rail Heavy – Gauge Steel Frame Integrated Generator / Flywheel Resistance System Durable Powder – Coated Paint Contact and Telemetric Heart Rate Console Display Large Dual Color LED Dot Matrix Programs 2 HRC, Interval, Custom, Hill, Fat Burn, Cardio, Strength, Fit Test, Manual Program Levels 40 Power Self-Generating Misc. Turbo Cooling Fan Commercial Warranty Assembled Weight: 145 lbs. User Weight Capacity: 450 lbs Dimensions: 57` x 30` x 51`

COMMERCIAL UPRIGHT BIKE :- Easy – To – Use console with 40 Resistance levels Easy – To – Adjust 12-Position Aluminum Seat Rail Heavy – Gauge Steel Frame Integrated Generator / Flywheel Resistance System Durable Powder – Coated Paint Contact and Telemetric Heart Rate Assembled Dimensions: 43` x 22` x 54` Assembled Weight: 115 lbs. User Weight Capacity: 450 lbs. Console Display: Large Dual Color LED Dot Matrix Programs: 2 HRC, Interval, Custom, Hill, Fat Burn, Cardio, Strength, Fit Test, Manual Program Levels: 40 Power: Self-Generating Misc.: Turbo Cooling Fan

COMMERCIAL AIR ROWER :- Heavy duty magnetic flywheel resistance Fully auto controlled air mag Highly engineered heavy duty frame 15 auto control programs 3 heart rate programs plus HR recovery Personal data storage for 4 users Extra long row beam - suits taller users Angled footrests with pivoting heel supports Built in HR receiver Maximum user weight 160kgs

COMMERCIAL VIBRATOR :- Specifications :- AC driving system with adjustable variable frequency AC Motor power: 500W with SPRIL MOVEMENT. Speed range: 60 levels. Large LCD panel. Built in speakers and MP3 axillary jack / USB slot. Various motivating programs for different workout requirements. Exercise charts showing posture for different body parts. With straps for stretching exercises Maximum User Weight : 180 Kgs

SEATED PREACHER CURL :- Specifications :- 4”X2” heavy duty 11 gauge main from construction. ¼ zinc plated solid gun racks Durable double stitched upholstery. Metallic silver electro statically applied power coat paint finish , with adjustable seat. Size :-110cm (L) x 81cm (W) x 88 cm (H)

AB BENCH :- Specifications :- 4”X2” heavy duty 11 gauge main from construction. ¼ zinc plated solid gun racks Durable double stitched upholstery. Metallic silver electro statically applied power coat paint finish Size :-174.5 cm (L) x 93.6 cm (W) x 99.7 cm (H)

STRETCH :- Specifications :- 4”X2” heavy duty 11 gauge main from construction. ¼ zinc plated solid gun racks Durable double stitched upholstery. Metallic silver electro statically applied power coat paint finish Size :- 128.8 cm (L) x 55.5 cm (W) x 90 cm (H)

SEATED CALF RAISE :- Specifications :- 4”X2” heavy duty 11 gauge main from construction. ¼ zinc plated solid gun racks Durable double stitched upholstery. Metallic silver electro statically applied power coat paint finish with adjustable seat handle. Size:135.6 cm (L) x 75.1 cm (W) x 83.1 cm (H)

LEG PRESS / HACK SQUAT :- Specifications :- 4”X2” heavy duty 11 gauge main from construction. ¼ zinc plated solid gun racks Durable double stitched upholstery. Metallic silver electro statically applied power coat paint finish .. Size :-225 cm (L) x 97.55.1 cm (W) x 147.5 cm (H)

MULTI HYPER EXTENSION :- Specifications :- 4”X2” heavy duty 11 gauge main from construction. ¼ zinc plated solid gun racks Durable double stitched upholstery. Metallic silver electro statically applied power coat paint finish Size :-121.1 cm (L) x 72.5 cm (W) x 93.3 cm (H)

FLAT BENCH :- Specifications :- 4”X2” heavy duty 11 gauge main from construction. ¼ zinc plated solid gun racks Durable double stitched upholstery. Metallic silver electro statically applied power coat paint finish Size :- 115.9 cm (L) x 90 cm (W) x 42 cm (H)

VERTICAL KNEE RAISE/ DIP STAND :- Specifications :- 4”X2” heavy duty 11 gauge main from construction. ¼ zinc plated solid gun racks Durable double stitched upholstery. Metallic silver electro statically applied power coat paint finish Size :- 112 cm (L) x 78 cm (W) x 155cm (H)

MULTI ADJUSTABLE BENCH :- Specifications :- 4”X2” heavy duty 11 gauge main from construction. ¼ zinc plated solid gun racks Durable double stitched upholstery. Metallic silver electro statically applied power coat paint finish Size :- 121 cm (L) x 75 cm (W) x 46.5 cm (H)

OLYMPIC WEIGHT TREE :- Specifications :- 4”X2” heavy duty 11 gauge main from construction. ¼ zinc plated solid gun racks ,Metallic silver electro statically applied power coat paint finish Size :- 96 cm (L) x 62.5 cm (W) x 120 cm (H)

MULTI AB BENCH :- Specifications :- 4”X2” heavy duty 11 gauge main from construction. ¼ zinc plated solid gun racks Durable double stitched upholstery. Metallic silver electro statically applied power coat paint finish Size :- 173.8 cm (L) x 72.5 cm (W) x 89.9 cm (H)

OLYMPIC FLAT BENCH :- Specifications :- 4”X2” heavy duty 11 gauge main from construction. ¼ zinc plated solid gun racks Durable double stitched upholstery. Metallic silver electro statically applied power coat paint finish Size :- 170 cm (L) x 166 cm (W) x 137 cm (H)

OLYMPIC INCLINE BENCH :- Specifications :- 4”X2” heavy duty 11 gauge main from construction. ¼ zinc plated solid gun racks Durable double stitched upholstery. Metallic silver electro statically applied power coat paint finish with height adjustable Size :- 163.2 cm (L) x 165.8 cm (W) x 137.3 cm (H)

OLYMPIC DECLINE BENCH :- Specifications :- 4”X2” heavy duty 11 gauge main from construction. ¼ zinc plated solid gun racks Durable double stitched upholstery. Metallic silver electro statically applied power coat paint finish Size :- 210.3 cm (L) x 165.8 cm (W) x 137 cm (H)

12 PAIR DUMBBELL RACK :- Specifications :- 4”X2” heavy duty 11 gauge main from construction. ¼ zinc plated solid gun racks. Metallic silver electro statically applied power coat paint finish Size :- 159 cm (L) x 81.5 cm (W) x 98.5 cm (H)

PLATE LOADED T-BAR ROW :- Specifications :- 4”X2” heavy duty 11 gauge main from construction. ¼ zinc plated solid gun racks. ,Metallic silver electro statically applied power coat paint finish Size :- 198cm (L) x 98 cm (W) x 126 cm (H)

UTILITY BENCH :- 4”X2” heavy duty 11 gauge main from construction. ¼ zinc plated solid gun racks Durable double stitched upholstery. Metallic silver electro statically applied power coat paint finish

SHOULDER PRESS BENCH :- 4”X2” heavy duty 11 gauge main from construction. ¼ zinc plated solid gun racks Durable double stitched upholstery. Metallic silver electro statically applied power coat paint finish Size :- 134.9 cm (L) x 112.6 cm (W) x 165 cm (H)

BARBELL RACK :- 4”X2” heavy duty 11 gauge main from construction. ¼ zinc plated solid gun racks Metallic silver electro statically applied power coat paint finish Size :- 96 cm (L) x 71 cm (W) x 1086 cm (H)

MAX RACK :- 4”X2” heavy duty 11 gauge main from construction. ¼ zinc plated solid gun racks Metallic silver electro statically applied power coat paint finish Size :- 96 cm (L) x 71 cm (W) x 108 cm (H)

RUBBER COATED SOLID DUMBBELL :- Tear proof, soundless and bouncy effect. Dumbbell Weight Size :- ( 2.5 Kgs ,5Kgs , 7.5 Kgs ,10 Kgs, 12.5 Kgs, 15 kgs, 17.5 kgs, 20kgs, 22.5kgs,25 kgs, 30 kgs ,35kgs ,40kgs,45 kgs ,50kgs)

COLORED RUBBER COATED OLYMPIC PLATES:- Tear proof, soundless and bouncy effect. Plate weight Size :- (1.25 kgs ,2.5 kgs , 5 kgs ,7.5 kgs , 10kgs ,15 kgs,20 kgs ,25 kgs)

OLYMPIC ROD :- Size :- 5’ (Feet) ,6’ (Feet) ,7’ (Feet)

OLYMPIC ROD ZIG ZAG :- Size :- 4’ Feet

sauna spa 18 kw with oine wood

steamer 18 kw

Bow and arrows n magnetic tareget area

Boxing. Heavy gauge box steel construction Anti rust powder coated, 25mm commercial grade plywood floor, Expandable foam lining, Polypropylene ropes covered with vinyl covers and rope spacers. Corner pads and safety covers for turnbuckles, Seam sealed vinyl coated ring cover, Complete with turnbuckles and other metal accessories, Swing arm ring chairs, 3 sets of ring stairs, 2 sets of funnel, pipe and sanitary buckets, Platform sides covered with ring skirt

Fire Resistant Glazed Sliding Door for Lift Lobby Area Supply and installation of tested Vetrotech Saint-Gobain VDSTM fully glazed fire rated double leaf automatic sliding door with 120 minutes of integrity and radiation control (EW 120) and insulation for 30 minutes (EI 30) with symmetrical (Bi-Directional) fire protection. The frames shall be imported cold rolled Forster profiles from Switzerland using DX52D plus Z275-M-A-O steel sheets (As per EN standard EN 10327). The door frames are cold rolled from 1.5 mm steel sheet to form a profile of 50 mm x 50 mm on all sides. The door shutter would have the top rail, side rail and bottom rail dimensions of 50 mm x 50 mm. The overall door opening shall be as per tested evidence and tested as per EN 1634-1 in an accredited international laboratory. The glass should be Contraflam Lite 14mm clear 120 min fire rated for Integrity, Radiation control (EW 120) and partially insulation (EI 30) Non Wired Toughened Interlayered glass with a light transmission of 86% and a sound reduction of 38 dB and manufactured in UL and TUV audited Facility and including UL-EU Certification and compliant to class 1(B)1 category of Impact Resistance as per EN 12600. The glass shall be tested for UV resistance duration of 5000 hours. The glass shall provide bi-directional (Symmetrical) fire protection. The door has to be connected to the surrounding construction by means of interlocking labyrinths lined with intumescent tapes as per the test evidence and connected to the sliding mechanism at the top. The automatic sliding mechanism shall be as mentioned in the tested evidence or Assessment and shall have steel rollers. The sliding mechanism shall have inbuilt battery backup to ensure automatic operation for a minimum of 30 cycles following a power outage. The glass should be held in its place with the help of 1.5 mm cold rolled steel beading and Kerafix 2000 ceramic tape with cross section of 4 x 15 mm as per the test evidence. Beading shall be clipped on using Stainless Steel self-tapping screws fixed at a distance of 70 mm from the edges and 150 mm c/c henceforth. The glass panes are to be supported on non-combustible 6 mm Calcium Silicate setting blocks.The sliding mechanism shall be fixed to adequate supporting construction (MS channel / Reinforced concrete) to ensure proper support for the door.

Fire Resistant Single Leaf Glazed Door with Panic bar for Staircase Supply and installation of tested Vetrotech Saint-Gobain VDS® fully glazed fire-rated Latched double leaf door system with 120 minutes of integrity and radiation control (EW 120) with symmetrical (bi-directional) fire protection through a VDS Certified Installer. The frames shall be made of imported cold rolled profiles. The door frames are cold rolled from 1.5 mm steel sheet to form a profile of 50 mm x 50 mm on all sides. The door shutter would have the top rail, side rail and bottom rail dimensions of 50 mm x 50 mm. The overall door opening shall be as per tested evidence and tested as per EN 1634-1 in an accredited international laboratory. The glass shall be CONTRAFLAM LITE (14mm) clear, non-wired, toughened, interlayered, 120 minutes fire-rated glass for integrity and radiation control (EW 120) and insulation (I 20) with a light transmission of 86% and a sound reduction of 38 dB and manufactured in UL and TUV audited facility and including UL-EU Certification (File number R38101) and compliant to class 1(B)1 category of Impact Resistance as per EN 12600. The glass shall be tested for 5000 hours of UV resistance as per EN ISO 12543-4. The glass shall be EPD (Environmental Production Declaration) verified in accordance to EN 15804 and ISO 14025 in which its life cycle assessment is performed considering Cradle to Gate system boundaries. The glass must produce a recycled content declaration committing to a pre-consumer cullet of up to 11% and post-consumer cullet less than 1%. The glass shall provide bi-directional (symmetrical) fire protection. The shutters should be fixed to the frame using weld-on hinges of dimensions 179mm X 20mm. The profiles shall have grooves to incorporate fire-resistant gaskets. The doors shall incorporate drop down seal at the bottom. The glass should be held in its place with the help of 1.5 mm cold rolled steel beading and Kerafix 2000 ceramic tape with cross section of 4 x 15 mm as per the test evidence. The beading shall be clipped on using stainless steel self-tapping screws fixed at a distance of 70 mm from the edges and 150 mm c/c henceforth. The glass panes are to be supported on non-combustible 5 mm thick calcium silicate setting blocks. The door should be fitted with panic bar (Dorma PHA 2000) and door closer of Dorma (TS 73V, TS 83V, TS93V), Geze (TS 2000NV) or equivalent. The inactive leaf should be fixed to the frame using a tower bolt at meeting edge at top or as per the tested evidence. The doors shall be manufactured in a TUV audited facility.

Water proofing and Insulation for terrace. Providing and applying elastomeric, PU coating water proofing and insulation system to be applied at required consumption to achieve a minimum 1.5mm DFT with required coat (minimum 2 coat) uniformly spread in entire area. System shall be executed as follows: 1) Surface preparation shall be done as per manufacturer specifications followed by single component PU water proofing coating 2) Repairing cracks on mother roof slab by cutting and making V grooves in 25x25 mm, and filling with a polymer modified sand-cementitious mortar using Webertec SBR Litx , of 1:3 proportion and filling the groove with CM (1:3) as recommended by manufacturer specification.3) Making fillet and haunches with polymer modified mortar using Webertec SBR Litx or as per manufacturer of minimum size 50mm x 50mm 4) Supplying and applying a base coat of single component polyurethane based waterproofing coating, having elongation ) 600%, crack bridging = 2 mm, tensile strength of ) 4.0 Mpa, watervapour permability )30 gm /sqm per day, minimum DFT 1.5mm (as per ASTM D 412),shore hardness 65 on a surface prime with 2 component water thinable 2 component epoxy primer at the corners above the mother slab of roof and over the concrete haunches provided in the periphery of the slab at the junctions of the parapet wall or 450mm 5) Spray applying an average 80 mm thick polyurethane foam (CFC and HCFC free), with a core density of 45-50 kg /m3, thermal conductivity of 0.023 W/m.k at 25°C mean temperature (as per ASTM C518/91), tensile strength of ) 300kPa (as per ASTM D 1623), compressive strength with rise of )300kPa (as per ASTM D-1621), closed cell content having apparent vol of ) 90% (as per ASTM D 6226/ 2856) and fire resistance property conforming to Class B2 as per DIN 4102. 6) Application of PU form shall be followed by, supplying and applying a base coat of one component polyurethane based waterproofing coating Weberdry PUR Basic, having elongation of ) 600% and tensile strength of ) 4 MPa, with minimum DFT 1.5mm (as per ASTM D 412), over a PU foam and vertical above upto 450mm. 7) Supplying and laying 300 gsm Geotextile (non woven polyester) over the entire membrane maintaining proper overlaps of 100 mm and above vertical as per manufacturer`s specification. 8) Applying average 100 mm thick M25 grade concrete screed including providing control joints in 3M X 4M grids size, and providing the angular haunch of 50mm X 50mm using M25 grade concrete at the corners of the slab-parapet wall junctions all around the periphery. Screed concrete shall be cut by mechanical means and filling the groove with a one component Polyurethane Sealant that is moisture triggered and cast immediately on saw cutting joints on green concrete. The width of sealant fill shall not exceed 10mm. (Screed as per above description shall be paid separately). Providing and applying UV resistant, a spray/ roller applied solar reflective cum waterproof coating Weberdry PUR Coat for terrace area with elastomeric property and having a SRI value not less than 90 (as per ASTM E 1980), with crack bridging ability up to 1mm (as per ASTM C 836: 1995) and elongation at break of 250 % (as per ASTM D 412 : 2002), having tensile strength = 2.0 Mpa with a coverage of 400 gm/sqm in 2 coats. The termination of the SRI coating shall be terminated at the drip moulds of the plaster of the parapet wall (upto 450mm), above the haunch. After completion of SRI coating, additional anti dust/ protective coating shall be applied to achieve a zero dust adherence on the coating so as to maintain the SRI value. Plan area of terrace (in to in of parapet wall) shall be measured for payment.. Make: Weber, Mapei, Kerakoll

Retaining wall Treatment : Providing and applying single component, elastomeric, pitch modified PU coating water proofing system of Weberdry PU Bitseal to be applied at consumption of 2.5 kg/sqm to achieve a minimum 1.5 mm DFT with required coat (minimum 3 coat) uniformly spread in entire area. System shall be executed as follows: 1) Surface preparation shall be done as per manufacturer specifications followed by single component PU water proofing coating 2) making fillet/ provision of corner tape 3) PU self priming application as per manufacturer recommendation 4) Pitch PU waterproofing can be applied by roller, spray or short hair brush PU waterproofing. Waterproofing shall be taken covering entire parapet wall up to min 300mm. 5) Laying Geotextile (non-woven polyester) membrane in 300 micron thickness as recommended by water proofing system provider, with a min of 100mm wide overlap and on typical locations like wall and floor junctions, rain water down take etc. shall be embedded between two coats as per manufacturer`s specifications. 6) Protection screed laid to slope which shall be paid in relevant tender item. The pitch modified PU coating system must deliver the following properties: 1) Tensile Strength - )1.0 N/mm2 2) Crack bridging capacity - ) 3 mm as per EN1062-7(A) 3) An elongation of minimum 500% as per ASTM D 412 with puncher resitant as per ASTM E 154 ) 30 N Cost includes all material, labour, TandP, wastage involved as mentioned in the item except protection concrete screed. Contractor shall submit methodology statement with all detail in illustrative sketch form and get approved from Engineer-in-charge. Application shall be carried out by approved applicator of manufacture and as per recommended by manufacturer. Plan area (in to in of parapet wall) of balcony/ sunken/ terrace etc shall be measured for payment. Make: weber, Mapaei, Kerakoll

Protection Board in Verticals: Providing and installing of 25 mm with 32 density thick EPS protection board of approved over the layer of Polyurethane using appropriate compatible adhesive to prevent any damage to membrane during backfilling. The protection board is to be spot-bonded on the applied waterproofing. Contractor shall submit methodology statement with all details in illustrative sketch form and get approved from Engineer-in-charge. Application shall be carried out by registered applicator of the manufacture and approved by the Engineer-in-charge. Cost shall include all materials, labour, TandP, wastage etc. as mentioned above in the item. Applied area of PU coating as per approved methodology (horizontal and vertical) shall be measured for payment without any overlaps. MAke: E-pack, Ebaco, East India Technology, Speriplast

Providing and Applying 12 mm thick plaster(smooth or wired finished plaster) of polymer added ready mix cement mortar finished with trowel. GI hexagonal chicken mesh of size aperture 20 mm x 20 mm of 22 gauge and minimum 200 mm wide at RCC and masonary junctions or between different material and 145 GSM of minimum 150 mm wide fiber glass mesh with alkali resistant coating shell be fixed at plumbing and electrical works chasing areas, at corner and doors and window joints as per manufacturer`s specifications with GI nalis, hacking of concrete/ application of bonding agent, finishing, curing, scaffolding for all floor, all level, all height etc. complete as directed by Engineer-in-charge . Rate shall be inclusive of bonding agent, chicken mesh, glass fiber mesh, provision of groove / drip mould as per drawing etc. complete and as directed by Enigineer-in charge. Make: Weber, Kerakoll, Mapei

Surface preparation by appropriate means like removing spalled concrete with chisel and hammer or grinding with rotary diamond wheel grinding machine to roughen up the surface and prepare surface for primer application. Applying 2 coats of clear solvent free epoxy primer Weberfloor Easygrip 120 over the prepared concrete surface and laying 3 -5 mm thick self leveling screed Weberfloor Undercoat 1200. Make: Weber,Mapei,chryso

Priming epoxy screed with epoxy primer Weberprim Easygrip 120. After 12 - 16 hours applying 1 coat of single component polyurethane base coat Weberfloor Cardeck BC with elongation upto 100% and allowing it to dry for 16-24 hours. Topping the flexible membrane with single component wear and tear resistant polyurethane top coat Weberfloor Cardeck Finish in desired RAL shade. Make: Weber,Mapei,chryso

Priming epoxy screed with epoxy primer Weberprim Easygrip 120. After 12 - 16 hours applying 1 coat of single component polyurethane base coat Weberfloor Cardeck BC with elongation upto 200% and tensile strength upto 4 MPa. Broadcasting quartz sand of 0.3 -0.6 mm thickness evenly on wet membrane so as to obliterate the base coat. After 16-24 hours of drying remove excess of sand thoroughly with broom and topping the textured surface with single component wear and tear resistant polyurethane top coat Weberfloor Cardeck Finish in desired RAL shade. Make: Weber,Mapei,chryso

Marking junction of parking bays and driveway with 100 mm wide strip in contrasting shade so as to demarcate the areas

Providing and installing 9 mm thick Sports vinyl flooring as per manufacturer specification and as TTF, CE and ISO approval over finished flooring surface. With high perfomance international quality and with cushioning and impact resistancy for sports area application. The Vinyl Flooring shall be stored, used and installed by Boker/Trioflex authorized dealer, authorized vendor in accordance with the manufacture specifications and guidelines using the tools and accessories recommended and certificate for the same to be produced. Cost to include covering the laid floor with necessary protection with rolled polythene till handover ,cleaning for any stains before handover. etc. complete as per the drawing and to complete satisfaction of the Engineer. The adhesive used for laying the floor shall be as per written recommendation made by the manufacturer and as approved by the Engineer. Vendor to check the base floor quality for any undulations etc and have the same recitified before installation of the vinyl. Mode of Measurement : Actual Surface area to be measure for payment. Approve Makes - Boker, Trioflex, Vibrant, Polyflor

Providing and installing of Maple Wood Sports Engineered Wood flooring as per manufacturer specification and SQUASH authority approval over finished flooring surface. It must have multilayer construction as 20-22mm top layer maple wood fixed on top of pine members with rubber padding. Complete as per the drawing and to complete satisfaction of the Engineer. The adhesive used for laying the floor shall be as per written recommendation made by the manufacturer and as approved by client. Vendor to check the base floor quality for any undulations etc and have the same recitified before installation of the floor. Civil contractor to provide level floor. Approved Makes- Polyflor, Apex, Boker, Vibrant

Providing and fixing of Woven vinyl carpet floorings of VIBRANT FLOORS series with roll dimensions of 1.8/2mtr meters width and length of 20 meters or Tiles size as per company standard should be approved by architech. 2.50-2.80 mm thickness to laid on hard, levelled, smooth and moisture free sub floor with additional comfort and acoustic backing of 1mm. Vibrant Woven Vinyl flooring should have traffic classification 33 and weight of 2.7-3.5 kg/m2. Flooring should have caster chair EN-985 tested with color fastness of more than 6. It should be ASTME662 qualified on Smoke density test. Product must be fire rating of the product should be Bfl-S1. Any Joints in flooring rolls should be sealed with cold welding.As per approved shade and colour as per the satisfaction of the Architect. Self leveled, dry and hard subratate floor shall be provided by client. Dimension stability : ( 0.25%, Curvature: ( 2 mm, Colour fastness to light: ) 6, Anti-slip property: ) 0.3, Smoke density: (450. Makes : Vibrant Floors, Wovin, Polyflor, Bolon, 2Tec2

Providing and fixing Polyester powder coated aluminium (minimum thickness of polyester powder coating 50-60 micron) work for fix windows, ventilators and partitions with extruded built up standard tubular sections of 50mm series (25*50*46*1.5MM) and all aluminium profiles should be made of Aluminium Alloy 6063 T6 of make Schueco ,Amber, and Techanl having fixing arrangement with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /DGU/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.The system shall be designed to accomodate 28mm thk DGU glass for window system. Make: technal, Promience, Schueco.. DGU/ IGU Cost is not included

A) Acoustic Wall PET Panels made of polyester staple fibers with thickness of 10mm panels made from recycled PET bottles. It should be a homogeneous material with many color options. Size 2440mm x 1220mm. These PET Panels have thermal insulation and Anti-Fungal properties and free from formaldehyde / binding agents. Product should be an Indigenous product ‘Made In India’. Process of manufacturing should include needle punching to give required porosity / open cell structure for achieving the necessary acoustic properties .Product should be GRIHA approved for use of recycled materials Flammability: Tested as per EN - 13501, Class B Density: 170 – 180 kg/m3 0r 1700 – 1800 GSM .SIZE : 2440 X 1220 X 10 MM THICKNESS . Sound Absorption Coefficient (With 50mm Non- Woven Polyester Wadding of 900 GSM): NRC 0.90 as per ASTM C– 423/ISO 354. and 0.75 in case of use as ceiling tiles in modular T grid framing system . ( All Test report from NABL approved lab ). Make: Saint gobain, armstrong,technoceiling Finishing options : ( all facilities for designing and manufacturing the end applications should be in house ) 1. Laser cutting as per required designs and pattern 2. UV printing as per approved design and panels cut and matched well for required size of walls. . In case of multiple sheets the design continuity between sheets will be maintained for seamless looks 3. V grooving in desired shapes and dimensions . In case of multiple sheets the design continuity between sheets will be maintained for seamless looks . C) Installation Guidelines Installation with 50mm Non- Woven Polyester Wadding of 900 GSM: OPTION 1 . Techno PET panels can be directly stuck on well plastered / levelled wall or on plywood / gypsum surface by means of Bostik glue . Option 2 . Techno PET Panels to be installed on G.I. Frame OF 0.50 mm thickness and 48 x 35 mm section size . The channels are fixed on the wall by means of gi cleats to form a grid of approx.

Supply, Installation, Testing and Commissioning of 3.5M Decorative Pole, Dia-140mm, Thickness-3mm, Base Plate- 300x300x12mm, PU Painted with Matt Black Finish, Suitable for mounting of 30 W LED Post Top, CCT-2700K, CRI-)80, IP66 Protected, Cast Aluminium Body, Top Reflector Dia of 910mm, Anodised Aluminium Reflector, Toughned Glass, Pole shall be perforated for decorative lighting in medium section. Pole shall have arrangement for fixing terminal plate and SP MCB of 6A.

Supply, Installation, Testing and Commissioning of Architectural 3W LED based Step/Pathway Light suitable for outdoor application, SS 316 finish with international make lens, tempered safety glass, CCT-2700K, CRI)85, IP 67, IK-10, LED

Supply, Installation, Testing and Commissioning of LED Up and Down Light 2X 12W, CCT 2700K, CRI)85, IP66 SS finish, Suitable for outdoor application, Beam options for suitable application, aluminium body, Centralized optical package provides high quality point source beam versus pixilated designs,

Supply, Installation, Testing and Commissioning Architectural 15W LED based Ground Burial Uplighter, Narrow beam, CCT-2700K, IP68, IK-10, 316SS Finish with customized international make lens suitable for outdoor application,

Supply, Installation, Testing and Commissioning Architectural 10 W LED based Spike Light, Narrow beam, CCT-2700K, IP66, Aluminium Housing with customized international make lens suitable for outdoor application,

Supply, Installation, Testing and Commissioning Low Bollard of height 600mm, Made up of Cast Aluminium, LED Wattage-10W, Warm White, IP65 Protected, Matt Finish,

Fixing of Vitrified Tiles / Mosaic Tiles, or any type of stone in external and internal area of size Xmm on levelled cementitious screed or on plastered / RCC surface / existing tiles/ DRy wall surface two component, ready to mix, polyurethane based thinset adhesive of Saint Gobain make aplied at an average thickness of 5 - 6 mm* on floor / Wall by using Notch Trowel as per the manufcturer`s recommendation with 80% and more transfer of adhesive on tile and floor. The product need to be mixed as per the recommendration of manufacturer by mixing Take 9 parts component A, and 1 part component B, by weight (5:1 by volume) in a bucket /other suitable container to achieve smooth paste consistency. The adhesive should confirm the standard of reaction resin adhesive ( R), improved (2) and slip resistant ( T) of ISO 13007, EN12004 - with min density of 1.5-1.565 gm/cc. It should have a minimum Initial and After immersion Tensile Adhesion strength of 2 N/mm square , shear adhesion strength minimum 1.66 N/mm square, highly deformable adhesive (S2) should be minimum 5.2 mm with tensile adhesion strength 0.5 N/mm square minimum.

Supply and installation of 85x20mm thick wall partition system which includes layers of 8mm thick Fluted glass (2 Layers) and Top, Bottom, Verical Profiles And Also Glass to Glass joints Profiles Like I Profile, T Pro and L Profiles. From FFL to Height of 2700mm Glass Make:- Rainbow Glass. Finishes of all aluminium frame components : Black Finish Fluted Glass Supply of 8mm Thick Fluted Patterned Toughened Premium Lacquered Glass Range produced using Industrial Automated Advanced Coating system loaded with state of the art HVLP and Sensor Technology to ensure Precision Coating and No Peel off, high volume production, quickest colour change possibility for a reduced lead time produced with float glass having appropriate recycled content ,compressive strength ( 1000 MPa ) and Tensile strength ( 40 MPa ) , with adherence to environmental standards ( no lead, no arsenic, no copper ,no formaldehyde and Low VOC ( 50 microns thick ) and adherence to Colour Fastness ISO 105 B02,High Mechanical resistance test, ISO 2409 Cross Hatch test, High Humidity test, Adhesive Bond strength fixed with Neutral Alkoxy based silicone and compatible mirror mounting tape on a perfectly level substrate 12mm thick ( water proof marine plywood, MDF ) mounted on RCC wall /any other structure.

MEA 3000.0 Drain Channel made of polymer Concrete Clear width 300 mm, total width 360 mm, system is fitted with a Ductile Iron Grating Suitable for the D400 Load class and conform to the EN 1433, length 1m, Total height drain channel plus Ductile iron grating 300 mm.

MEA 1000.0 Drain Channel made of polymer Concrete Clear width 100 mm, total width 130 mm, system is fitted with a Ductile Iron Grating Suitable for the A15 Load class and conform to the EN 1433, length 1m, Total height drain channel plus Ductile iron grating 81mm.

MEA Inspection Chamber for Cleaning and Maintaince for MEA Drain channel length-0.5m

MEA End Cap With outlet Ø50/75/100mm

MEA closed End cap suitable for for channel start/end

Supply and installation of Techno Baffle Ceiling TM manufactured by Techno Ceiling Product of size 50x 150 mm placed at 150mm centre to centre of the following components and specifications: Carrier made of 0.50 mm GI, painted to matching baffle colour or black as directed by the engineer /architect. Baffle to have arrangement to fix, hang and lock the baffles of required sizes and at required intervals. The size of punched carrier would be 35x20x35mm bent channel with holes for suspension and fixing secondary channel. The baffles would be made from Aluminium profiles of 0.70 mm TCT, U shaped bent to 150 mm height and 50 mm bottom width. The top edge will have a flange of 5 mm to fix in the carrier profile. These baffles would be polyester powdercoated 60 micron to the approved shade . Suspension...The carriers would be placed at every 1200 mm (maximum) and suspended by means of a secondary channel fixed to the carrier at every 900 to 1200 mm and this secondary member in turn would be suspended by means of a 3 mm wire and level adjustment butterfly clip...fixed to the slab by means of a 6 mm diam., dash fastener. Colour Solid RAL powdercoated.

Providing, fabricating, assembling, and erection of prestressed Tensile Membrane Car Parking Fabric Structure L 5.5 m x W 2.5 m x H 3 m = Qty 20 Nos, Tensile fabric 750 GSM Fabric, Tensile Fabric (PVDF) Imported Fabric. Tensile Fabric Make PVDF, Yashshree Engineering, Ferrari, Mehler, manufactured in imported Tensile Fabric, Weight 750 GSM, Tensile Strength 2500/3000, Tear Strength 40/80, Adhesion 100 N/ 5CM, Warranty 07 years, Life 20 Years, Light Transmission 80/90 %, Temperature Resistance-30c/ plus 70c, Purling pipe @ 90 mm / T 3mm, Kollam Pipe@ 160 mm / T 3, Arch Pipe @114 mm /T 3, supporting pipe@ 76 mm / T 2, Feri ferry box@ 90 x 90 x T 3, Bees plat@ 300 x 300 x T 16, Fastener M.20, Epoxy Primer 1 Cot, Epoxy Paint 2 Cot, this work shall include patterning, forming, cutting, welding, fixing, and installation with Aluminum profile, flats, self-drilling screws, GI tension cables and SS nut bolts for fabric fittings, etc., including lifts up to all heights, tools, and plants, etc. required for all operations complete as per directions of Yashshree Engineering Engineer in Desing and charge work. The rate includes the cost of all materials, labor charges, loading, unloading, lead lift, and transportation charges, all taxes inclusive. `Design, Supply and Erection of Tensile Fabric Roof including required Support Structure as per Yashshree Engineering drawings with following specification.

4kg FK 5-1-12 DLP2 system Firecheck brand Direct Low Pressure System filled with 2Kg FK-5-1-12 Gas, UL Approved, Suitable for Electrical / Electronic sensitive equipments, Cylinder-Stainless Steel,Grade-304, Thickness-1.2 mm, Hydrostatic pressure tested, Valve : DLP Valve with Single Outlet, Stainless Steel Connectors, External Ball Valve, Push In Pnematic Fittings, Valve Inlet M30x 1.5, Valve Outlet G1/8`, Diptube Thread M16 x 1.5, Pressure Gauge Thread M10x1, Seal Seat Diameter 63.6mm2, Operating Pressure 15 to 23 Bar, Test Pressure 28 Bar, Operating temperature -20 Degree C to plus 65 Degree C. End of Line Adaptor SKU : V1023001 End of Line Adapter with Non Return Valve, Tube Dimension 4mm ID, 6mm OD, Material Brass Coated, Pressure Range 15-18 Bar, Max Pressure 60 Bar at 65 degree C, Operating Temperature Range -20 Degree C to plus 65 Degree C, Installation Torque for thread G1/8`, plus /-1 nm. Pressure Switch Pressure Gauge cum Switch NC contact at 5 Bar,CE Marked and PED Approved T-Connector T Connector Push-in Tube Fitting, Tube Dimension 4mm ID, 6mm OD, Material Brass Coated, Pressure Range 15-18 Bar, Max Pressure 60 Bar at 65 degree C, Operating Temperature Range -20 Degree C to plus 65 Degree C. End of Line Plug End of Line Plug Push-in Tube Fitting, Tube Dimension 4mm ID, 6mm OD, Material Brass Coated, Pressure Range 15-18 Bar, Max Pressure 60 Bar at 65 degree C, Operating Temperature Range -20 Degree C to plus 65 Degree C. Heat Sensing Tube Black HR Grade Multilayer UV Protected SKU : C0410001 Heat Sensing tube Black HR Grade, UV Protected, Multi Layered, Special Modified Polyamide Material, Made in Europe with Certificate of Origin, Tube ID 4MM OD 6MM, Operating Pressure 15-18 Bar, Maximum Pressure 30 Bar at maximum Temperature of plus 65 Degree C, Burst Temperature 125 Degree C, Service Life 8-9 Years, Long Term Application, Max Bend in Installation 140mm, Max space between tubes 250mm. Health Monitoring Panel Health Monitoring Panel for monitoring the pressure of the cylinder,Connection with Pressure Switch,Provision of NO/NC Contact for further connection with BMS, having battery backup,BMS Connection shall be in scope of client and technical help shall be provided as and when required.

HOT WATER MIXING TANK PRESSURISED Cap 5000 Ltrs. Material MS Working Pressure 4Kg/cm2 Shell Thickness 6 mm Dish Thickness 8 mm Insulation Thickness 100mm Outer Al. Cladding 24SWG Complete with cold/Hot water inlet/outlet 50NB, Drain connection 50NB Manhole with bolted cover 450mm Dial type thermometer 01 No. Thermal Bleed Valve 01 No. Strainer 01 No. Complete in all respects. Internal Epoxy Coating for Joints 2 Coats Supporting Structure MS Electric Backup 2*18KW Each Heater 6KW CONTROL PANELS FOR AUTOMATIC OPERATION OF EL. BACK UP AND HEAT PUMP Supply of control panel IP Rated With accessories like MCBs, Contractors, Control Fuse, Indicators with Teflon coated sensor wires for automatic circulation of pumps in 4 compartments of 18 kw each i.e., 4*18 kw With MCBs for Heat Pumps. Supply of Heat Pump Air Source ISS-10 C Heat Pump – 39 kw to heat water up-to 550 C to 60 Deg. C COP-4.6 (Highest in India at 55-60 Deg. C) Highest COP in Industry in India With Self Diagnostic PLC Controls With Automatic Defrost Digital Temperature Readout 460% Heat Efficiency Long Life Compressor Copeland Heat Exchanger Copper Tube in Steel Case Circulation Pump for Heat Pump Recirculation Pump Multi Stage Material of Impellers SS Flow Rate LPH 7000 Ltrs. Head 15 Mtrs. Make Leo No. of Ball Valves 02 Nos. Strainer 01 No. With M.S stands ,Supports etc. INTERCONNECTION PIPING for 30 meter Supply of GI B- Class/CPVC Piping Dia. 50NB with necessary Fittings with 13 mm Thick Nitrile Insulation with UV Protected Coating

Providing Stainless Steel Pipe and Press Fittings system confirming to NSF 61 and NSF 372 Standard complete with 5 Point VV-press type of fittings with Hot and Cold water supply, water treatment and domestic water supply system capable to withstand temperature upto 130 degree Celsius and Press holding upto 20 Bar with the stainless steel grade EN 1.4404 ( 316L) . The Fittings Should have 2 O-Ring on one side , include couplers, elbows, Tee, Reducers, Female coupler, Male Coupler, Female Elbows, Female Tee Unions etc should certified with CE ( PED), REACH and ROHS Compliant. The Pipes qualify to 100% Eddy current test, 1000 PSI Hydrostatic test, POE coated pipes, Laser etched marking, 320 Grit Polished outer surfaces, mention specific Heat Number in 6-meter length. The EPDM O-Ring should have 60 shore hardness which can stand temperature upto -20 degree C to plus 120-degree C. 1). 15 mm diameter

Providing Stainless Steel Pipe and Press Fittings system confirming to NSF 61 and NSF 372 Standard complete with 5 Point VV-press type of fittings with Hot and Cold water supply, water treatment and domestic water supply system capable to withstand temperature upto 130 degree Celsius and Press holding upto 20 Bar with the stainless steel grade EN 1.4404 ( 316L) . The Fittings Should have 2 O-Ring on one side , include couplers, elbows, Tee, Reducers, Female coupler, Male Coupler, Female Elbows, Female Tee Unions etc should certified with CE ( PED), REACH and ROHS Compliant. The Pipes qualify to 100% Eddy current test, 1000 PSI Hydrostatic test, POE coated pipes, Laser etched marking, 320 Grit Polished outer surfaces, mention specific Heat Number in 6-meter length. The EPDM O-Ring should have 60 shore hardness which can stand temperature upto -20 degree C to plus 120-degree C. 1). 22 mm diameter

Providing Stainless Steel Pipe and Press Fittings system confirming to NSF 61 and NSF 372 Standard complete with 5 Point VV-press type of fittings with Hot and Cold water supply, water treatment and domestic water supply system capable to withstand temperature upto 130 degree Celsius and Press holding upto 20 Bar with the stainless steel grade EN 1.4404 ( 316L) . The Fittings Should have 2 O-Ring on one side , include couplers, elbows, Tee, Reducers, Female coupler, Male Coupler, Female Elbows, Female Tee Unions etc should certified with CE ( PED), REACH and ROHS Compliant. The Pipes qualify to 100% Eddy current test, 1000 PSI Hydrostatic test, POE coated pipes, Laser etched marking, 320 Grit Polished outer surfaces, mention specific Heat Number in 6-meter length. The EPDM O-Ring should have 60 shore hardness which can stand temperature upto -20 degree C to plus 120-degree C. 1). 28 mm diameter

Providing Stainless Steel Pipe and Press Fittings system confirming to NSF 61 and NSF 372 Standard complete with 5 Point VV-press type of fittings with Hot and Cold water supply, water treatment and domestic water supply system capable to withstand temperature upto 130 degree Celsius and Press holding upto 20 Bar with the stainless steel grade EN 1.4404 ( 316L) . The Fittings Should have 2 O-Ring on one side , include couplers, elbows, Tee, Reducers, Female coupler, Male Coupler, Female Elbows, Female Tee Unions etc should certified with CE ( PED), REACH and ROHS Compliant. The Pipes qualify to 100% Eddy current test, 1000 PSI Hydrostatic test, POE coated pipes, Laser etched marking, 320 Grit Polished outer surfaces, mention specific Heat Number in 6-meter length. The EPDM O-Ring should have 60 shore hardness which can stand temperature upto -20 degree C to plus 120-degree C. 1). 35 mm diameter

Providing Stainless Steel Pipe and Press Fittings system confirming to NSF 61 and NSF 372 Standard complete with 5 Point VV-press type of fittings with Hot and Cold water supply, water treatment and domestic water supply system capable to withstand temperature upto 130 degree Celsius and Press holding upto 20 Bar with the stainless steel grade EN 1.4404 ( 316L) . The Fittings Should have 2 O-Ring on one side , include couplers, elbows, Tee, Reducers, Female coupler, Male Coupler, Female Elbows, Female Tee Unions etc should certified with CE ( PED), REACH and ROHS Compliant. The Pipes qualify to 100% Eddy current test, 1000 PSI Hydrostatic test, POE coated pipes, Laser etched marking, 320 Grit Polished outer surfaces, mention specific Heat Number in 6-meter length. The EPDM O-Ring should have 60 shore hardness which can stand temperature upto -20 degree C to plus 120-degree C. 1). 42 mm diameter

Providing Stainless Steel Pipe and Press Fittings system confirming to NSF 61 and NSF 372 Standard complete with 5 Point VV-press type of fittings with Hot and Cold water supply, water treatment and domestic water supply system capable to withstand temperature upto 130 degree Celsius and Press holding upto 20 Bar with the stainless steel grade EN 1.4404 ( 316L) . The Fittings Should have 2 O-Ring on one side , include couplers, elbows, Tee, Reducers, Female coupler, Male Coupler, Female Elbows, Female Tee Unions etc should certified with CE ( PED), REACH and ROHS Compliant. The Pipes qualify to 100% Eddy current test, 1000 PSI Hydrostatic test, POE coated pipes, Laser etched marking, 320 Grit Polished outer surfaces, mention specific Heat Number in 6-meter length. The EPDM O-Ring should have 60 shore hardness which can stand temperature upto -20 degree C to plus 120-degree C. 1). 54 mm diameter

Supply and Fixing of 0.53mm TPT pre-painted ZINCALUME TRIMDEK roof sheet of 1015mm effective cover width with five major corrugation, 28mm high rib spaced at 203mm c/c with subtle square fluting in the pan and the end rib shall have anti-capillary groove and return leg. The steel sheet sha l be fastened with 40µm zinc coated or 25µm zinc-tin alloy coated, Hex head, self- drilling screw as per AS 3566-2002 Class 3 fasteners of Roofix or approved make.The base steel of cladding material shall be 0.45 mm Base Metal Thickness (BMT), coated with hot-dipped Zincalume alloy coating (i.e. 55% Al, 43.4% Zinc, 1.6% Si) AZ150 (i.e. minimum of 150 g/m2 Al-Zn alloy coating mass total on both sides) having yield strength of 550MPa conforms to AS1397 /IS15961 and factory painted and oven baked with total 35 micron paint DFT confirms to AS/NZS 2728- type 4 / IS15965- class 3 of Colorbond XRW Steel of Tata BlueScope make or equivalent. On exposed surface of the sheet shall be having 20-micron DFT of Super Durable Polyester exterior quality paint system (free from Lead and heavy metals) over 5-micron DFT corrosion inhibitive polyester primer and on reverse side of sheet shall have 5-micron DFT polyester coat over 5-micron corrosion inhibitive polyester primer. The paint system shall have inorganic and ceramic pigments in Super Durable Polyester resin with high glass transition temperature. The roof’s solar reflectance Index shall be more than 84 (Surfmist SRI – 87), GRIHA and IGBC GreenPro Ecolabelled certified Product. The steel manufacturer shall provide an Environmental Product Declaration (EPD) to the structural designers, ensuring transparency in the material`s environmental impact. The steel sheet shall be of prime quality with a uniform finish, coating mass and strength and branding on back side with details such as thickness, grade, coating mass, date, mfg. name. The steel manufacturers test certificate for the chemical and mechanical properties of steel must be approved by the concerned authority prior to installation. The fastener size shall be calculated as per the design or manufacturers recommendations. The measurement shall be based on finished/covered surface area.Note: The contractor shall prepare the shop drawings based on the drawings supplied by the engineer-in-charge or the concern authority. These shall be submitted in five sets sufficiently in advance to the concern authority for approval. Material Warranty: Contractor shall provide a written 25 yrs warranty against perforation of metal roof panels due to corrosion under normal weather and atmospheric conditions and 12 yrs exterior paint film warranty against film cracking, peeling and color fading for roof and wall panels. The color panels shall not fade (Delta E) more than 6 in Light color, more than 9 in intermediate color, and more than 12 in dark color, measured in accordance with ASTM D 2244. Weathertightness warranty: Contractor shall provide a written weathertightness warranty for a maximum of 5years against leaks in roof panels, arising out of or caused by ordinary wear and tear under normal weather and atmospheric conditions. Warranty shall be signed by both the metal roof system manufacturer and the metal roof system installer.

Thermal insulation: Providing and installation of thermal insulation PIR Board or equivalent in the form of boards with aluminium facers of 45 micron, fire class A1 not flammable: 100-120 mm thick in two layers (as per profile of metal sheet and approval of engineer incharge), installation method staggering, thermal conductivity 0.021W/mK, without gaps. The fastenening of the membrane and insulation shall be done as per wind load calculation done according to FM Global standard/Euro code.The wind load calculation shall be done by the manufacturer and approved by engineer in charge.

Material Warranty: Contractor shall provide a written 25 yrs warranty against perforation of metal roof panels due to corrosion under normal weather and atmospheric conditions and 12 yrs exterior paint film warranty against film cracking, peeling and color fading for roof and wall panels. The color panels shall not fade (Delta E) more than 6 in Light color, more than 9 in intermediate color, and more than 12 in dark color, measured in accordance with ASTM D 2244. Weathertightness warranty: Contractor shall provide a written weathertightness warranty for a maximum of 5years against leaks in roof panels, arising out of or caused by ordinary wear and tear under normal weather and atmospheric conditions. Warranty shall be signed by both the metal roof system manufacturer and the metal roof system installer. `Substrate preparation: Cleaning the metal surface using a power wash to make it dust and sludge free, applying any rust remover and zinc rich corrosion protective coating as per manufacturers advise.`

Perimeter accessories: Providing and applying S U Bar/ Polysulphide sealant along the perimeter of the roof fixed using Sarnafast fasteners, cover strip made up of L covering the S U Bar, and terminated using S Termination Bar and sealed using Sikaflex sealant.

Termination and detailing: Providing and applying PU coating/ Epoxy Metal PVC sheet which is galvanised steel (quality DX51D Z275) with epoxy coating protection and metal sheet factory coated with same PVC compound as roof sealing membrane and fixing the same according to manufacturers advise.

Providing and applying sealant with Anchor is a manufactured preformed accessory providing a secure watertight connection directly between the roof substructure/roof deck and waterproofing membrane. The product shall be of the same manufacturer as that for the membrane.

Providing, fixing and commissioning the overhead storage tank of 5000 liter, its should be fully insulated consisting the inside grade of stainless steel is 2205 and outside grade is 304, the inslation is high density PU foaming, xlpe and nitrile insulation the tank should be 7 layers suitable for minimum 4 kg/sqm woking pressure. The insulation is approx 100 mm thick on all side, The tank mounted on heavy structure stainless steel 304 grade.

Addition to the HSR Brick work item in Rat trap bond system and ready mix mortar of 13.5` Thick external Wall to provide gap for appropriate insulation

Variable Refrigerant Volume / Flow Air-conditioning System (Heating and Cooling both) Supply Installation, Testing and Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V plus /- 10%, 3 Phase, 50Hz AC power supply.The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP of each module at shall not be less than 3.1 at 100% load at 35 Deg C ambient temprature. Note: VRF system shall have auto Restart function i.e. In case of power failure, units should restart automatic when power resume. 14 HP Heat Pump

Variable Refrigerant Volume / Flow Air-conditioning System (Heating and Cooling both) Supply Installation, Testing and Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V plus /- 10%, 3 Phase, 50Hz AC power supply.The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP of each module at shall not be less than 3.1 at 100% load at 35 Deg C ambient temprature. Note: VRF system shall have auto Restart function i.e. In case of power failure, units should restart automatic when power resume. 16 HP Heat Pump

Variable Refrigerant Volume / Flow Air-conditioning System (Heating and Cooling both) Supply Installation, Testing and Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V plus /- 10%, 3 Phase, 50Hz AC power supply.The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP of each module at shall not be less than 3.1 at 100% load at 35 Deg C ambient temprature. Note: VRF system shall have auto Restart function i.e. In case of power failure, units should restart automatic when power resume. 18 HP Heat Pump

Variable Refrigerant Volume / Flow Air-conditioning System (Heating and Cooling both) Supply Installation, Testing and Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V plus /- 10%, 3 Phase, 50Hz AC power supply.The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP of each module at shall not be less than 3.1 at 100% load at 35 Deg C ambient temprature. Note: VRF system shall have auto Restart function i.e. In case of power failure, units should restart automatic when power resume. 20 HP Heat Pump

Variable Refrigerant Volume / Flow Air-conditioning System (Heating and Cooling both) Supply Installation, Testing and Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V plus /- 10%, 3 Phase, 50Hz AC power supply.The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP of each module at shall not be less than 3.1 at 100% load at 35 Deg C ambient temprature. Note: VRF system shall have auto Restart function i.e. In case of power failure, units should restart automatic when power resume. BHF/Y brach for ODU

Variable Refrigerant Volume / Flow Air-conditioning System (Heating and Cooling both) Supply Installation, Testing and Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V plus /- 10%, 3 Phase, 50Hz AC power supply.The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP of each module at shall not be less than 3.1 at 100% load at 35 Deg C ambient temprature. Note: VRF system shall have auto Restart function i.e. In case of power failure, units should restart automatic when power resume. JGT Gas tight joint for ODU

Supply, Assembly, Erection, Testing and Commissioning of Ceiling Concealed 4-Way Cassette Units with panel with fittings . Three speed motor, multi blade type , duly statically and dynamically balanced to give the required air flow, filter, coil section with DX coil, fresh air intake connector wherever required, outer cabinet, insulated drain pan, Corded remote , built-in drain pump , filter etc including all accessories.Cable from cassette unit to socket and headers etc.Complete in all respect as required at site.Make : Daikin 3.18 TR 4- Way Cassette Type Units

Supply, Assembly, Erection, Testing and Commissioning of Ceiling Concealed 4-Way Cassette Units with panel with fittings . Three speed motor, multi blade type , duly statically and dynamically balanced to give the required air flow, filter, coil section with DX coil, fresh air intake connector wherever required, outer cabinet, insulated drain pan, Corded remote , built-in drain pump , filter etc including all accessories.Cable from cassette unit to socket and headers etc.Complete in all respect as required at site.Make : Daikin 2.55TR 4- Way Cassette Type Units

Supply, Assembly, Erection, Testing and Commissioning of Ceiling Concealed 4-Way Cassette Units with panel with fittings . Three speed motor, multi blade type , duly statically and dynamically balanced to give the required air flow, filter, coil section with DX coil, fresh air intake connector wherever required, outer cabinet, insulated drain pan, Corded remote , built-in drain pump , filter etc including all accessories.Cable from cassette unit to socket and headers etc.Complete in all respect as required at site.Make : Daikin 2.01 TR 4- Way Cassette Type Units

Supply, Assembly, Erection, Testing and Commissioning of Ceiling Concealed 4-Way Cassette Units with panel with fittings . Three speed motor, multi blade type , duly statically and dynamically balanced to give the required air flow, filter, coil section with DX coil, fresh air intake connector wherever required, outer cabinet, insulated drain pan, Corded remote , built-in drain pump , filter etc including all accessories.Cable from cassette unit to socket and headers etc.Complete in all respect as required at site.Make : Daikin 1.3 TR 4- Way Cassette Type Units

Supply, Assembly, Erection, Testing and Commissioning of Ceiling Concealed 4-Way Cassette Units with panel with fittings . Three speed motor, multi blade type , duly statically and dynamically balanced to give the required air flow, filter, coil section with DX coil, fresh air intake connector wherever required, outer cabinet, insulated drain pan, Corded remote , built-in drain pump , filter etc including all accessories.Cable from cassette unit to socket and headers etc.Complete in all respect as required at site.Make : Daikin Simple Wired Remote

Supply, Assembly, Erection, Testing and Commissioning of Ceiling Concealed 4-Way Cassette Units with panel with fittings . Three speed motor, multi blade type , duly statically and dynamically balanced to give the required air flow, filter, coil section with DX coil, fresh air intake connector wherever required, outer cabinet, insulated drain pan, Corded remote , built-in drain pump , filter etc including all accessories.Cable from cassette unit to socket and headers etc.Complete in all respect as required at site.Make : Daikin Y Branch

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, push fitting jointing including accessories, insulated with Class-O closed cell elastometric nitrile rubber tubular Refrigerant piping shall be laid on heavy duty GI covered cable trays only at terrace. Entire refrigerant piping work be carried out in accordance with the specifications. Copper pipes and fittings Make: Rajco/Mandev/Mex Flow .Tubler insulation Make : Supreme/Armaflex/Aflex/Thermobreak. Copper Piping shall be of following sizall accessories as per specifications etc. as required. 6.4 mm dia (OD) (Soft drawn) with 13 mm insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, push fitting jointing including accessories, insulated with Class-O closed cell elastometric nitrile rubber tubular Refrigerant piping shall be laid on heavy duty GI covered cable trays only at terrace. Entire refrigerant piping work be carried out in accordance with the specifications. Copper pipes and fittings Make: Rajco/Mandev/Mex Flow .Tubler insulation Make : Supreme/Armaflex/Aflex/Thermobreak. Copper Piping shall be of following sizall accessories as per specifications etc. as required. 9.5 mm dia (OD) (Soft drawn) with 13 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, push fitting jointing including accessories, insulated with Class-O closed cell elastometric nitrile rubber tubular Refrigerant piping shall be laid on heavy duty GI covered cable trays only at terrace. Entire refrigerant piping work be carried out in accordance with the specifications. Copper pipes and fittings Make: Rajco/Mandev/Mex Flow .Tubler insulation Make : Supreme/Armaflex/Aflex/Thermobreak. Copper Piping shall be of following sizall accessories as per specifications etc. as required. 12.7 mm dia (OD) (Soft drawn) with 13 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, push fitting jointing including accessories, insulated with Class-O closed cell elastometric nitrile rubber tubular Refrigerant piping shall be laid on heavy duty GI covered cable trays only at terrace. Entire refrigerant piping work be carried out in accordance with the specifications. Copper pipes and fittings Make: Rajco/Mandev/Mex Flow .Tubler insulation Make : Supreme/Armaflex/Aflex/Thermobreak. Copper Piping shall be of following sizall accessories as per specifications etc. as required. 15.86 mm dia (OD) (Soft drawn) with 13 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, push fitting jointing including accessories, insulated with Class-O closed cell elastometric nitrile rubber tubular Refrigerant piping shall be laid on heavy duty GI covered cable trays only at terrace. Entire refrigerant piping work be carried out in accordance with the specifications. Copper pipes and fittings Make: Rajco/Mandev/Mex Flow .Tubler insulation Make : Supreme/Armaflex/Aflex/Thermobreak. Copper Piping shall be of following sizall accessories as per specifications etc. as required. 19 mm dia (OD) (Soft drawn) with 13 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, push fitting jointing including accessories, insulated with Class-O closed cell elastometric nitrile rubber tubular Refrigerant piping shall be laid on heavy duty GI covered cable trays only at terrace. Entire refrigerant piping work be carried out in accordance with the specifications. Copper pipes and fittings Make: Rajco/Mandev/Mex Flow .Tubler insulation Make : Supreme/Armaflex/Aflex/Thermobreak. Copper Piping shall be of following sizall accessories as per specifications etc. as required. 22.2 mm dia (OD) (Soft drawn) with 13 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, push fitting jointing including accessories, insulated with Class-O closed cell elastometric nitrile rubber tubular Refrigerant piping shall be laid on heavy duty GI covered cable trays only at terrace. Entire refrigerant piping work be carried out in accordance with the specifications. Copper pipes and fittings Make: Rajco/Mandev/Mex Flow .Tubler insulation Make : Supreme/Armaflex/Aflex/Thermobreak. Copper Piping shall be of following sizall accessories as per specifications etc. as required. 28.58 mm dia (OD) (Soft drawn) with 13 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, push fitting jointing including accessories, insulated with Class-O closed cell elastometric nitrile rubber tubular Refrigerant piping shall be laid on heavy duty GI covered cable trays only at terrace. Entire refrigerant piping work be carried out in accordance with the specifications. Copper pipes and fittings Make: Rajco/Mandev/Mex Flow .Tubler insulation Make : Supreme/Armaflex/Aflex/Thermobreak. Copper Piping shall be of following sizall accessories as per specifications etc. as required. 34.6 mm dia (OD) (Soft drawn) with 13 mm thick insulation

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, push fitting jointing including accessories, insulated with Class-O closed cell elastometric nitrile rubber tubular Refrigerant piping shall be laid on heavy duty GI covered cable trays only at terrace. Entire refrigerant piping work be carried out in accordance with the specifications. Copper pipes and fittings Make: Rajco/Mandev/Mex Flow .Tubler insulation Make : Supreme/Armaflex/Aflex/Thermobreak. Copper Piping shall be of following sizall accessories as per specifications etc. as required. 41.7 mm dia (OD) (Soft drawn) with 13 mm thick insulation

GI Cable tray 300x75x1.6 with Cover

Providing and fixing control cum transmission wiring of 2 core x 1.5 sqmm copper with refrigerant piping between indoor units and outdoor units and indoor units and wired controllers. Complete in all respect as required at site.

Supply and installation, testing and commissioning of Rigid heavy class PVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick nitrile rubber tubular insulation.Make:Supreme/Armaflex/Aflex/Thermobreak 50 mm dia 6mm thick Nitrile rubber

Supply and installation, testing and commissioning of Rigid heavy class PVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick nitrile rubber tubular insulation.Make:Supreme/Armaflex/Aflex/Thermobreak 32 mm dia 6mm thick Nitrile rubber

Supply and installation, testing and commissioning of Rigid heavy class PVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick nitrile rubber tubular insulation.Make:Supreme/Armaflex/Aflex/Thermobreak 25 mm dia 6mm thick Nitrile rubber

Angle Stand for Outdoor units

Supply, installation, testing and commissioning of Ceiling hang/floor mounted long cased axial flow type Exhaust Air Fan for ventilation of following capacity with powder coated MS casing and aluminium alloy impellers , blades, the impeller directly driven by induction motor (IE-3) and `H` class insulation suitable for 3 Phase, 50 Hz, 415±10% Volt, ac supply,suitable capacity of starter with TP isolator within M.S enclosure box complete as required and as per specifications. The fan shall be rated for a minimum of 250 Deg C for a minimum of 2 hours application as per EN 12101:3-2015, every moddel shall be mention in test report, make of motor same as test report. Fan should be complete with all accessories including canvas connection, vibration isolators, gravity louvers, bird screen as specified in the specification. Oulet velocity max 18m/sec. Sound not more than 85dba@3mtr. CFM 18000 SP-2500 PASCAL NORMAL EXHAUST

Supply, installation, testing and commissioning of Ceiling hang/floor mounted long cased axial flow type Exhaust Air Fan for ventilation of following capacity with powder coated MS casing and aluminium alloy impellers , blades, the impeller directly driven by induction motor (IE-3) and `H` class insulation suitable for 3 Phase, 50 Hz, 415±10% Volt, ac supply,suitable capacity of starter with TP isolator within M.S enclosure box complete as required and as per specifications. The fan shall be rated for a minimum of 250 Deg C for a minimum of 2 hours application as per EN 12101:3-2015, every moddel shall be mention in test report, make of motor same as test report. Fan should be complete with all accessories including canvas connection, vibration isolators, gravity louvers, bird screen as specified in the specification. Oulet velocity max 18m/sec. Sound not more than 85dba@3mtr. CFM 18000 SP-2500 PASCAL SMOKE EXHAUST OPTIONAL

Supply, installation, balancing and commissioning of fabricated at site GSS 120 GSM sheet metal rectangular ducting with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Make : Ductofab / Zeco/Aeroduct. Thickness 0.60 mm sheet (24 Gauge)

Supply, installation, balancing and commissioning of fabricated at site GSS 120 GSM sheet metal rectangular ducting with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Make : Ductofab / Zeco/Aeroduct. Thickness 0.80 mm sheet (22 Gauge)

Supply, installation, testing and commissioning of GI/ Aluminium volume control duct damper / Collor Damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc., as per specifications.

Supplying and fixing of powder coated extruded aluminium Return Air Grills without aluminium volume control dampers as per specifications.

Canvas Connection for Ventilation Fan

Extra Gas Top up

Bidder Name

Amount

PK GUPTA & CO (GSTN-07AAJPG3073E1ZZ) BID ID -1081266

Krishna Construction Co (GSTN-06AALFK6441Q1ZP) BID ID -1081301

SKG INFRATECH PRIVATE LIMITED(GSTN-NA)--1081300

GLOBE CIVIL PROJECTS PRIVATE LIMITED(GSTN-NA)--1081247

GLOBE CIVIL PROJECTS PRIVATE LIMITED

PK GUPTA & CO

Krishna Construction Co

PK GUPTA & CO

Krishna Construction Co

GLOBE CIVIL PROJECTS PRIVATE LIMITED