CARRYING OUT REPAIRS/ROUTINE MAINTENANCE OF LIFTS INSTALLED IN BLDGS GANGOTRI BHAGIRATHI AND DIWAKAR BLDG AT OUTLAYING AREAS INCLUDING MANNING AND OPERATION UNDER GE (NW) NOFRA COLABA MUMBAI

Amount

Repair/maintenance of lifts including carrying out daily check and periodical services of fully automatic electrical lift with power operated door, simplex collective control system with repair/maintenance of unserviceable damaged parts such as bearings, bushes, all type of guide shoes, headers, hangers, door ropes,door cards,car door sills, landing door sills, door locks, control cards, and its contacts, hall push buttons and its spares, connector/links, welding of crack/broken and MS parts, Landing operating Panel of any size and capacity, repairs /maint of u/s damaged door safety edge and sensor mechanical safety lock, magnetic lock or contact, car position indicator, and all connected accessories, necessary wiring of hall push button assembly, repair/maintenance of broken COP/LOP buttons and display, including cover, Fire alarm, Firemen button glass, Intercom, alarm/hooters, Maintenance of damaged hand rail, Shaft, light/switches, complete with illuminated push button and direction indicator with LED display with LPT/LPC card of stainless steel inclusive of harness wiring for laminating of push button of each floors and cutting wall making good disturbed surface with masonry work to make with existing surface & cable as per requirement for safe operation of lifts , fixing of loose rail bracket with necessary masonry work , replacement of broken granites,cabin, minor repair of cabin light and minor repair of cabin fan , ensure safe and smooth functioning of lift and complete maint of car top, binding of loose wire at control panel and rust painting at car top and door and allied parts with testing, two coats of Painting of Gear motor, all MS channels and Control panels using spray gun complete, dewatering of lift wells in case of any emergency arise all as directed by Engineer-in-Charge. for the following lifts:- Note : - (i) Two mechanic shall be available round the clock at lift complaint cell for safe & smooth functioning of the lift. (ii) Rewinding of motor if required will be done by the contractor and no extra cost will be given by the department.(iii) The detailed duty mechanics of the firm shall report to the JE Concerned at the Lift complaint cell for receiving the complaints at round the clock daily including sunday and holiday.(iv) The detailed lift mechanics shall sign ( Their shift wise) in the attendence register kept with lift cell. If he is found absent or move without intimating to in-charge of Lift Cell or JE E/M he will be treated as absent for the said shift and recovery to this effect for Rs. 1500/- per shift shall be affected. Location :- Gangotri 03 Nos and Bhagirathi 02 Nos Lift G+15 upper floor. (13 PS) Otis Make

All as per item No 1.00 but13 PS lift 01 No (844 Kgs) 08 Ps 02 Nos (544 Kgs) (G+12) lift installed at Diwakar building. Total 03 Nos. OTIS Make.

Disconnecting and taking out old defective V3F door operator with all connected accessories from existing car door, supply and fix new V3F door drive operator suitable to existing motor mechanism unit suitable for existing door opening and connected with existing system including testing and commissioning complete for smooth and jerk free working of lift car door In certain lift at Nofra complete all as specified and directed by Engineer-in-Charge.

Supplying & fixing new car operating panel complete all as specified and directed by Engineer-in-Charge including taking down old.

Disconnecting and taking out old defective infra red door sensor of any type and make and supply and fix new infra red door sensor of up to full length of car door In certain lift at out laying area complete all as specified and directed by Engineer-in-Charge.

Taking down the gear assembly, supplying and fixing new worm shaft and worm gear with housing and allied assembly as per exisiting size and Complete gear machine Overhauling by opening of Gear removing old dirty oil, cleaning & Replace of new Gear oil refitting of the same with new packing & adjustment of thrust bearing & keep it into perfect working order.complete all as specified and directed by Engineer-in-Charge.

Distmantling and taking down old main motor with brake assembly, break motor arm complete set motor with brake assembly with allied items etc with drum and complete motor machine Overhauling by opening of motor replacent of worn out parts and keep it into perfect working order complete all as specified and directed by Engineer-in-Charge.

Taking down the gear pedastal from gear motor and supply and fixing new gear pedestel with bearing and base complete all as specified and directed by Engr-in_Charge

Supply and fix Aluminum covered wire wound dynamic breaking resistor to absorb the reserve energy dissipation of motor during regeneration in control operation suitable for existing capacity motor up to 15 HP VFD complete all as specified and directed by Engineer-in-Charge.

Taking down unserviceable cabin fan from car cabin and supply and fixing new new car cabin fan non oscilatting type axial flow single speed 300mm sweep, 240 volts ISI mark with grill complete all as specified & directed by Engr-in-Charge.

Taking down old/unserviceable main pulley and supply and fix new main pulley complete all as specified and directed at site complete all as specified and directed by Engineer-in-Charge

Supply and fix new false ceiling made up of stainless steel sheet 1.2 mm thick 18 SWG having 300 mm dia/square hole for fan 4 hole for lights and refixing all exisiting necessary arrangementscomplete all complete all as specified and directed by Engineer-in-Charge

Dismantling and taking out defective batteries of automatic rescue devices and supplying and fixing new maintenance free batteries suitable for ARD including necessary connection.7 AH 12 V Complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking out defective batteries of automatic rescue devices and supplying and fixing new maintenance free batteries suitable for ARD including necessary connection.17 AH 12 V Complete all as specified and directed by Engineer-in-Charge.

Manning & operation of electrically operated lift 13/06/08 Goods lift ofany capacity make - ECE, OTIS,Thyssenkrupp,etc to serve upto G+15 upper floors (Bhagirathi), 02 Nos a daily 16hrs in two shift from 0600 hrs to 1400 hrs and 1400 hrs to 2200 hrs including taking care of from any pilfrerage/ theft or damage etc, complete all as directed by Engineer-in-Charge in Bldgs :Gangotri,Bhagirathi bldgs (Total- 02 Nos bldgs) Note :- (i) One lift operator to be employed in two bldg per shift. (ii) Passes will be processed only after verification of antecedence of deployed employees and submission of verified experience certificate, Pass shall not be granted without submission of qualification proof & experience certificate for lift operator. In case of OEM, the qualification mentioned in note is not applicable which shall be verified by Engineer-in-Charge before issue of passes (iii) Contractor shall submit ID proof, Residential proof, Bank A/C details to department and obtain approval of Engineer-in-Charge before employing a person as Operator (iv) Payment to employees shall be done by crossed cheque through Aadhaar linked bank account only and it shall not be less than minimum fair wages as per act in vogue. The contractor shall submit proof to Engineer-in-Charge before claiming any payment. (v) Lift operator (semi skilled) shall be available with lift cell as per the shift timings specified in the tender and he will report to JE E/M in-Charge or Lift Cell in-Charge. In case of emergency he will function according to their direction. If he is found absent or move without intimating to in-Charge of Lift Cell or JE E/M he will be treated as absent for the said shift and recovery to this effect for Rs 1500/- per shift shall be affected.(v) Payment as per quoted rate shall also be deducted in addition to the penalty as specified above. (vi) In case of malfunctioning if any noticed, lift operator shall intimate to the lift cell. The individual employed as lift operator should has minimum qualification of 10th pass or equivalent from state or central board

(vii) Contractor shall submit the labour licenece VAT as applicable as per latest laws/acts & Copy of GST Regn registered number issued by concerned authority. (viii) Insurance coverage, compensation if any applicable or necessitated due to mis operation of lift shall be the responsibility of contractor. The quantum of compensation shall be assessed based on the BOO composing of Lift Inspector of Maharashtra State, representatives of both agencies carrying out M&O works and routine maintenance work of lift and members from department. (ix) Contractor has to submit proof of payment of EPF subscription made by him as applicable as per latest laws/acts alongwith RAR failing which RAR will not be progressed for payment. (x) The rates quoted by the contractor shall be deemed to be included provision of all latest labour laws / regulations including all relevant taxes as applicable. (xi) The bidders are advised not to quote rate less than minimum fair wages as circulated by competent authority. If the quoted amount is less than the estimated cost of work mentioned in BOQ item No 15.00 i.e Rs 7,19,840.00, the lowest bidder will have to deposit FDR/BGB as elaborated herein after in favour of Accepting Officer within 07 days of opening of financial bid (Cover No 2). The deposited amount shall be the difference between estimated cost mentioned in BOQ item No 15.00 (i.e) Rs 7,19,840.00.00 and amount quoted by lowest bidder. FDR/BGB shall be released only after satisfactory completion of work. If the contractor fails to pay minimum wages to employees, the department shall have right to withhold the said amount which will be verified by GE. The decision of Accepting Officer regarding amount to be withhold shall be final and binding. The withhold amount will be utilised by GE for payment to employees if contractor fails to pay minimum wages and balance amount if any shall only be released. If the lowest bidder fails to deposit the amount as stated above within 07 days, the contractor shall be banned for 06 months & his bid shall be rejected. The contractor shall sumbit 03 Nos of BGBs/FDRs of equal amount as mentioned above. The BGBs/FDRs validity shall be 04 months, 08 month & 12 months respectively for the purpose of encashment/ release as the case may be. (xii) The rates quoted shall be inclusive of suitable reliver wherever sundays & holidays are mentioned for working

Escon Elevators Pvt Ltd

Veer High Tech Solution

Monarch Enterprises