Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
4 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Jitender Singh, IDSE, EE
GE (N) Bathinda
REPAIR AND REPLACEMENT OF ROAD FURNITURE AND REPAIR OF KERB STONE UNDER GE (N) BATHINDA AT BATHINDA MIL STN
2026_MES_799627_1
8941/NIT-63/26-27/E8
Open Tender
Civil Works
Item Rate
180 days
Bathinda
Class D Category a(v)
8 documents required · 8 mandatory
₹500
GE (N) Bathinda
₹80,000
Yes
20 Nov 2026
20 Nov 2026
7 Dec 2026
20 Nov 2026
4 Dec 2026
27 Nov 2026
20 Nov 2026 - 26 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply and Fixing of 1000 mm diameter convex safety mirror, manufactured from long-life, high-impact-resistant and shatterproof polycarbonate material, complete with sunshade/protective hood of colour as approved by the GE. The mirror shall be mounted on a 75 mm diameter mild steel pipe post of suitable length, as directed by the Engineer-in-Charge. The MS pipe shall be thoroughly cleaned, treated with one coat of red oxide primer and finished with synthetic enamel paint of approved colour.
The item shall include providing and fixing the MS pipe post by embedding it in a PCC block of mix 1:2:4 (Type B-1), size 450 × 450 × 600 mm, including necessary earthwork, excavation, preparation of foundation, placing and compacting concrete, backfilling and making good the disturbed surface, complete all as specified and as directed by the Engineer-in-Charge.
Note:
(i) The make and model of the convex mirror shall be submitted for approval of the Accepting Officer before placement of order.
(ii) The rate shall include the mirror, protective hood, MS pipe post, painting, PCC foundation block, earthwork, fixing arrangements and all necessary accessories. No extra payment shall be admissible on these accounts. | 12 | Each | - | - |
| 2 | Supply and Fixing of solar-powered LED road stud (Solar Cat's Eye) in replacement, having aluminium alloy body of 100% waterproof design conforming to IP65 protection, overall size 125 mm × 125 mm × 25 mm, with 65 mm long shank. The unit shall be provided with a high-efficiency monocrystalline solar panel of 2.40 V / 0.3 W capacity, one Ni-Ed rechargeable battery of 1.20 V / 1600 mAh capacity and super-bright LED(s). The solar cells, rechargeable battery, LEDs and automatic light sensor shall be securely housed and protected beneath a tough, unbreakable transparent polycarbonate top cover. The solar road stud shall be capable of providing illumination for 2–3 nights after a full charge of approximately 8–10 hours under suitable sunlight conditions. The item shall include removal of the existing unserviceable road stud, cleaning and preparation of the road surface, applying approximately 100 g of epoxy adhesive mixture per unit, placing and fixing the new solar cat's eye at the designated location without applying excessive pressure, and additionally securing it with a suitable-size zinc-plated steel nail at the centre of the unit, strictly in accordance with the manufacturer's instructions, complete all as specified and as directed by the Engineer-in-Charge.
Notes:
(i) The solar road stud shall be suitable for road-surface installation and designed to withstand traffic loading, impact, vibration and adverse weather conditions.
(ii) The manufacturer shall furnish technical data sheets and test certificates confirming waterproof protection, solar panel capacity, battery capacity, illumination duration and material specifications for approval by the Department.
(iii) Epoxy adhesive, zinc-plated steel nail and all necessary fixing accessories shall be included in the rate. No extra payment shall be admissible on these accounts. | 300 | Each | - | - |
| 3 | Supply and Fixing of metal tubular delineator in replacement, comprising an ABS round body fitted with 02 Nos. highly reflective reflectors of 65 mm diameter, manufactured from PMMA (Polymethyl Methacrylate), and mounted on a mild steel pipe of 45/50 mm diameter and 600 mm height. The MS pipe shall be duly powder-coated and provided with three bands of thermoplastic elastomer (TPE) reflective/radium tape, comprising green, red and yellow coloured strips, each 25 mm wide. The reflectors shall be provided with anti-theft stainless-steel/steel protective mesh to prevent damage or removal. The item shall include taking down the existing unserviceable delineator, excavation and preparation of foundation, embedding the new delineator in PCC of mix 1:2:4 (Type B-1), using 20 mm graded stone aggregate, in a foundation block of size 150 × 150 × 300 mm, including proper positioning, alignment, concreting, compaction, backfilling and making good the disturbed surface, complete all as specified and as directed by the Engineer-in-Charge.
Notes:
(i) The reflectors shall provide high visibility and retro-reflection under vehicle headlights during night-time conditions.
(ii) The make, model and technical specifications of the delineator and reflective components shall be submitted for approval before placement of order.
(iii) The rate shall include all materials, protective mesh, reflective tapes, foundation concrete, earthwork, dismantling of the existing delineator and all necessary fixing accessories. No extra payment shall be admissible on these accounts. | 500 | Each | - | - |
| 4 | Supply and Fixing of reflecting road studs (Cat's Eye) in replacement, manufactured from high-impact-resistant material and fitted with high-intensity retro-reflective lenses on the required faces for effective visibility and reflection of vehicle headlights during night-time and low-visibility conditions. The road studs shall be of approved make, type, shape and colour, suitable for road-surface installation and capable of withstanding normal vehicular traffic loads and weather conditions. The item shall include removal of existing unserviceable road studs, cleaning and preparation of the existing road surface, application of suitable two-component epoxy adhesive in the prescribed quantity, positioning and fixing of new road studs in proper alignment and at the required spacing, allowing adequate curing of the adhesive before opening the road to traffic, including all necessary materials, tools, equipment and accessories, complete all as specified and as directed by the Engineer-in-Charge.
Notes:
(i) The make, model, type and colour of the road stud shall be submitted for approval before placement of order.
(ii) The road studs shall be supplied with manufacturer's technical data sheets and test certificates confirming impact resistance and retro-reflective performance.
(iii) Epoxy adhesive and all necessary fixing accessories shall be included in the rate. No extra payment shall be admissible on this account. | 125 | Each | - | - |
| 5 | Supply and Fixing of STOP–LOOK–GO traffic safety signboard in replacement, fabricated from 2 mm thick aluminium sheet of approved size, duly finished with high-intensity retro-reflective sheeting and provided with legends, lettering, symbols and colour scheme as approved by the Engineer-in-Charge. The signboard shall be complete with necessary framing, stiffeners, clamps, brackets, bolts, nuts and other fixing accessories. The signboard shall be mounted on a 50 mm diameter galvanised iron (GI) pipe post of suitable height, including cutting, drilling, connecting and fixing of all accessories. The GI pipe post and other ferrous accessories shall be properly prepared and painted with approved paint system, wherever required. The post shall be embedded in a PCC foundation block of mix 1:3:6 (Type C-2), using 40 mm graded stone aggregate, including necessary excavation, preparation of foundation, placing and compacting concrete, backfilling and making good the disturbed surface, complete all as specified and as directed by the Engineer-in-Charge.
Notes:
(i) The size, layout, legend, lettering, colour scheme and retro-reflective sheeting shall be as approved by the GE/Engineer-in-Charge before fabrication.
(ii) The make and technical details of the retro-reflective sheeting shall be submitted for approval before placement of order.
(iii) The rate shall include the aluminium sheet, retro-reflective sheeting, GI pipe post, framing, stiffeners, brackets, clamps, fasteners, painting, PCC foundation, excavation, backfilling and all necessary accessories. No extra payment shall be admissible on these accounts. | 10 | Each | - | - |
| 6 | Supply and Fixing of modular road speed breaker in replacement, manufactured from high-impact-resistant ABS (Acrylonitrile Butadiene Styrene) plastic, of size 250 mm × 345 mm and 50 mm height, incorporating high-intensity cube-corner retro-reflectors for enhanced visibility during night-time and low-light conditions. The speed breaker module shall be suitable for outdoor road installation and capable of withstanding vehicular traffic loads, impact and adverse weather conditions. The item shall include removal of the existing unserviceable speed breaker, cleaning and preparation of the road surface, positioning and fixing of the new speed breaker module using suitable adhesive and steel nails/anchor fasteners of appropriate size, in accordance with the manufacturer's recommended installation procedure, including all necessary drilling, fixing accessories and finishing, complete all as specified and as directed by the Engineer-in-Charge.
Note:
(i) The make, model and technical specifications of the road speed breaker shall be submitted for approval of the Accepting Officer before placement of order.
(ii) The rate shall include adhesive, steel nails/anchor fasteners, removal of existing unserviceable material and all necessary fixing accessories. No extra payment shall be admissible on these accounts. | 100 | Each | - | - |
| 7 | Supply and Fixing of LED blinking warning light in replacement, comprising high-intensity amber-coloured LED(s) housed in a robust, weatherproof enclosure suitable for outdoor installation, complete with rechargeable battery and specified power supply/charging arrangement. The unit shall provide intermittent flashing illumination for effective warning and visibility during day and night conditions.
The item shall include taking down the existing unserviceable warning light, providing and fixing the new LED blinking warning light at the designated location, including suitable mounting brackets, clamps, fasteners, wiring and electrical connections, necessary accessories, testing and commissioning to ensure satisfactory operation, complete all as specified and as directed by the Engineer-in-Charge.
Notes:
(i) The make, model, LED configuration, battery capacity, power supply/charging arrangement and technical specifications shall be submitted for approval before placement of order.
(ii) The housing shall be weatherproof and suitable for continuous outdoor exposure.
(iii) The rate shall include rechargeable battery, mounting brackets, clamps, wiring, fasteners, dismantling of the existing unserviceable unit, testing and commissioning. No extra payment shall be admissible on these accounts. | 30 | Each | - | - |
| 8 | Supply and Fixing of cautionary/warning traffic signboard in replacement, of approved size 900 mm × 900 mm, fabricated from 2 mm thick aluminium sheet, duly covered with high-intensity retro-reflective sheeting and displaying the approved traffic symbol, colour scheme and legend, as applicable. The signboard shall be complete with necessary framing, stiffeners, brackets, clamps and fixing accessories. The signboard shall be mounted on a 50 mm diameter galvanised iron (GI) pipe post of suitable height, including necessary connecting arrangements, nut, bolts, washers and other fasteners. The GI pipe post and ferrous accessories shall be properly prepared and painted with approved paint system. The post shall be embedded in a PCC foundation block of mix 1:3:6 (Type C-2), using 40 mm graded stone aggregate, including necessary excavation, preparation of foundation, placing and compacting concrete, backfilling and making good the disturbed surface, complete all as specified and as directed by the Engineer-in-Charge.
Notes:
(i) The type of signboard, traffic symbol, legend, colour scheme and retro-reflective sheeting shall be as approved by the GE/Engineer-in-Charge before fabrication.
(ii) The make and technical details of the retro-reflective sheeting shall be submitted for approval before placement of order.
(iii) The rate shall include aluminium sheet, retro-reflective sheeting, GI pipe post, framing, brackets, clamps, nut, bolts, washers, painting, PCC foundation, excavation, backfilling and all necessary fixing accessories. No extra payment shall be admissible on these accounts. | 3 | Each | - | - |
| 9 | Supply and Fixing of GO–SLOW traffic safety signboard in replacement, of size 600 mm × 600 mm, fabricated from 2 mm thick aluminium sheet, duly covered with high-intensity retro-reflective sheeting and displaying the legend “GO–SLOW” in the approved lettering, colour scheme and layout. The signboard shall be complete with necessary framing, stiffeners, brackets, clamps and fixing accessories. The signboard shall be mounted on a 50 mm diameter galvanised iron (GI) pipe post of suitable height, including necessary connecting arrangements and all required nut, bolts, washers and fasteners. The GI pipe post and other ferrous accessories shall be properly prepared and painted with approved paint system. The post shall be embedded in a PCC foundation block of mix 1:3:6 (Type C-2), using 40 mm graded stone aggregate, including necessary excavation, preparation of foundation, placing and compacting concrete, backfilling and making good the disturbed surface, complete all as specified and as directed by the Engineer-in-Charge.
Notes:
(i) The signboard layout, lettering, colour scheme and type of retro-reflective sheeting shall be approved by the GE/Engineer-in-Charge before fabrication.
(ii) The make and technical details of the retro-reflective sheeting shall be submitted for approval before placement of order.
(iii) The rate shall include aluminium sheet, retro-reflective sheeting, GI pipe post, framing, stiffeners, brackets, clamps, fasteners, painting, PCC foundation, excavation, backfilling and all necessary fixing accessories. No extra payment shall be admissible on these accounts. | 6 | Each | - | - |
| 10 | Supply and Fixing of solar-powered flashing beacon, comprising high-intensity amber-coloured LED flasher, high-efficiency monocrystalline solar panel and rechargeable maintenance-free battery, housed in a robust, weatherproof polycarbonate enclosure suitable for outdoor installation. The unit shall be provided with an automatic light sensor for automatic switching ON/OFF and flashing operation during low-light/night-time conditions. The item shall include providing and fixing the beacon at the designated location with suitable mounting brackets, clamps, fasteners and all necessary accessories, including electrical connections, battery charging arrangement, testing and commissioning to ensure satisfactory operation, complete all as specified and as directed by the Engineer-in-Charge.
Notes:
(i) The make, model and technical specifications shall be submitted for approval before placement of order.
(ii) The solar panel capacity, battery capacity, LED intensity, flashing frequency, operating duration and battery backup shall conform to the approved manufacturer's specifications.
(iii) The housing shall be weatherproof and suitable for outdoor installation, with adequate protection against dust, moisture and adverse weather conditions.
(iv) The rate shall include solar panel, rechargeable battery, mounting brackets, clamps, fasteners, wiring, accessories, testing and commissioning. No extra payment shall be admissible on these accounts. | 10 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.08 MB
tenderdocuments63.pdf
Tender Documents • 0.74 MB
BOQ_897163.xls
BOQ • 0.86 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .