SPECIAL REPAIRS TO BUILDING NO T 43 AT AF STATION BEGUMPET UNDER GE AF HAKIMPET

Amount

SCHE DULE 'A' PART -I B/R PORTION :- Dismantling AC corrugated, semi corrugated sheets in roof covering etc complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section including trusses in any position as in unframed work, complete all as specified and as directed.

M& L for second class hard wood in scantlings clean sawn as in timber framed and fixed complete all as specified and as directed.

Description all as per Ser item No 3 above but except timber complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

PS&F re-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F (Fe 410 w gde 250A quality) rolled sections as in purlins where connected to common rafter and running rails and guides for roof fixed with angle cleats etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M & L for 75 mm thick Cement concrete type D-2, PCC 1:4:8 (using 40 mm graded stone aggregate) as in Sub-floors, sub-bases, floors and Pavings, etc complete all as specified and as directed.

M & L for Screed bed or bedding layer of cement mortar 15 mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and as directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square / rectengular) area of each tiles exceed 0.06 sqm but not exc. 0.11 sqm , coloured tiles as in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of dado / skirting complete all as specified and as directed.

S&F Glazed ceramic Coloured tiles 300 mm x 200 mm x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

S&F Colored ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Description all as per Ser item No 15 above but in skirting / dado etc complete all as specified and as directed.

M&L for Precast cement concrete 1:2:4, type B-1 mix (Using 20 mm graded granite stone aggregate) as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed.

M&L for Mild steel TMT 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M&L for 20 mm thick Granite(of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.

M & L for Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and as directed.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) and removing to or from store complete all as specified and as directed.

Taking down and removing to or from stores Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and as directed.

S & F Steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S & F Steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay,complete with out glazing bars, dovetailed or welded complete all as specified and as directed.

S & F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and as directed.

S&F Pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and as directed.

S&F Pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified,supplied and fixed complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 mix (using 20 mm graded stone aggregate) as in filling in pressed steel door frames complete all as specified and as directed.

S & F 35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stiles as per IS : 1003 (Paert 1) complete all as specified and as directed.

S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered complete all as specified and as directed.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and as directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and as directed.

S &F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty oin squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site complete all as specified and as directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet rinforced with MS Square tube suppling and fixing in opening complete all as specified and as directed.

Dismantling of of water tank (PVC) exc 500 n.exc 1000 Ltrs capacity and remove complete all as specified and as directed.

S & F Rotational moulded PVC water storage tanks 1000 Ltrs capcity (cylindrical vertical with closed top) hoissted and fixed in position complete all as specified and as directed.

S & F Ball brass valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S & F 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing complete all as specified and as directed.

S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and as directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and as directed.

S & F in repairs 15 mm bore Bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S & F in repairs Brass chromium plated shower rose 125 mm size with swivel joints fixing to steel pipes etc complete all as specified and as directed.

S & F in repair 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S & F in repairs 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 Kgf / Sq Cm., fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

S & F in repairs 50 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/ Sq. Cm., fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

S & F in repairs Vitreous China under counter Ware Wash hand basin oval shape coloured/ with fixing accessories set of size 595 mm x 420 mm x 200 mm complete all as specified and as directed.

S&F in repairs of Vitreous China Urinal, Half stall type, White (back or corner wall type) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, waste pipe pointing around urinal back in cement etc complete all as specified and as directed.

S&F soap dish, vitreous China white of approximate size 160 mm x 160 mm x 90 mm complete all as specified and as directed.

S&F in repairs Vitreous china urinal partition white of size 310 mm x 700 mm complete all as specified and as directed.

Supply and fix vitreous china squatting pan orissa pattern size 580 mm x 440 mm white with integral foot rests complet in repairs, including provision of concrete bedding complete all as specified and as directed.

S & F PVC valveless, syphonic action type, flushing cistern, low level, white or coloured with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

Supply and fixing in repairs of Hand shower( Health faucet) with 8 mm dia, 1.2 meter long flexible tube & wall hook with N.R.V (Back flow preventer) complete all as specified and as directed. Make: -Jaquar ALD-577 or equivalent make appoved by GE

Dismantling of cast iron or reinforced concrete drain pipes, internal dia of pipe 100mm jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls / floors complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) bends of any radius. complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) Vent Cowl complete all as specified and as directed.

S & F in repair PVC (SWR) Floor trap including grating,set and jointing with solvent cement 75 mm dia complete all as specified and as directed.

S & F Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as specified and as directed.

S& F in repair Stack clamps of 110 mm out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia. 40 mm long complete all as specified and as directed.

S&F anodised aluminium snap grid frame work of size 605 mm x 605 mm frame work for false ceiling complete all as specified and as directed.

S & F Gypsum Board 12 mm thick as in ceiling boards fixed with screws as per manufacturer instructions complete all as specified and as directed.

M&L for Hard core of Broken stones gauge n. exc 63mm deposited, spread and levelled in layers not exceeding 15cm thick watered and rammed to a true surface for plinth protection complete all as specified and as directed.

M & L for 75 mm thick cement concrete type C- 1 by using 20 mm graded aggregate 1:3:6 laid in pannels including finished surface smooth and even without using extra cement for plinth protection complete all as specified and as directed.

M & L for cement concrete tiles with gray cement and pigment 200 mm x 200 mm x 20 mm machine pressed set and jointed and pointed in neat cement slurry in floors complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, pillars etc complete all as specified and as directed.

M & L for Pre-cast cement concrete block masonry with solid blocks, Type C1 1:3:6 (20mm graded aggregate) exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and as directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new plastered surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with alkali resistent priming paint and chalk whitining preparatory to distempering on surfaces of ceiling over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed.

M & L for Complete removal of existing treatment on old surfaces and applying two coat of cement based paint over a coat of alkalli resistant primer on walls complete all as specified and as directed.

M & L for preparing new plastered surfaces and applying two coa ts of cement based paint over a coat of alkalli resistant primer on walls complete all as specified and as directed.

M & L for preparing newly plastered surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with alkalli resistant primer paint and chalk whitining preparatory to distempering on surface of walls complete all as specified and as directed.

M & L for preparing old surfaces including complete removal of existing treatment and applying two coats of distemper oil emulsion priming plastered and other surfaces with alkali resistant priming paint of surface of walls complete all as specified and as directed.

M&L for preparing old surfaces of walls by brooming down and applying one coat of white wash complete all as specified and as directed.

M&L for preparing new plastered surfaces of walls by brooming down and applying three coats of white wash complete all as specified and as directed.

Removing debris to a distance exc 1.5 Km but not exc 5.0 Km including loading and dumping / levelling at the destination complete all as specified and as directed.

M&L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth not otherwise described and treated with two coats of creosote complete all as specified and as directed.

M&L for Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and as directed.

M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

SCHE DULE 'A' PART -II E/M PORTION :- Taking down carefully copper/ aluminium point wiring (light, fan,socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good disturbed surfaces of walls, floors etc complete all as specified and as directed .

M&L for Point wiring complete with 1.5 sq mm single core PVC insulated FRLS cable, with multi standard copper conductors, 1100 volts grade, drawn thorough and including suitable size PVC casing caping and including provisoin of 1.5 sq mm PVC insulated copper cable FRLS as earth continiuty conductor, fabricated steel teminal box made out of 1.60 mm thick MS sheet concealed in walls and covered with 3 mm thick hylum sheet for fixing the switches /sockets/ regulators etc. complete all as specified and as directed for the following :-

(a) One light point controlled by one way switch .

(b) One ceiling fan/ exhaust fan point controlled by one way switch.

(c) One 3 pin socket outlet 5 Amps on the same board with other switches.

(d) One 3 pin 5 Amps socket outlet the switch board of light point ini the same vertical plane.

(e) One 3 pin socket outlet 5 Amps on the Independent board.

Description all as per item No 94 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed .

S&F Endura Surface and wall mounted 20 W LED, 4' batten, extruded aluminium housing & integrated electronic driver ready to use pack etc. complete with all accessories internally pre-wired and fixing the same on and including two Nos. PVC blocks and connecting up with twin core twisted flexible copper conductor cable with suitable size upto ceiling rose. Make:- Havells Model No: LUMILINEPLUSBS20WLED865SPCS or equivalent approved make

S&F Lamp angle holder PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed .

Taking down old unserviceable sub main wiring and M&L for new Sub main wiring complete with Two runs of 6 Sq mm Single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with One run of 6 Sq mm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including suitable size PVC casing and caping including accessories complete all as specified and as directed. Note:- Three runs of 6 Sq mm + PVC casing caping with accessories measure as a one unit. length

S&F Switch Piano, flush type single pole, one way 5 Amps complete all as specified and as directed .

S&F socket outlet, 2 in 1, 3 Pin, flush type 5 Amps complete all as specified and as directed .

S&F switch socket combination, 2 in 1, 5 Pin, flush type 5 & 15 Amps complete all as specified and as directed .

S&F stepped type electronic fan regulator flush type complete all as specified and as directed .

S&F ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and as directed .

M&L for Taking down ceiling / exhaust fan of any description, cleaning all dust and hanging ceiling fan and connecting up including provision of cable from ceiling rose to connector of fan complete all as specified and as directed .

Supply and fixed in repairs distribution board 415V IP 43 protection TPN double door 4 way when incomer and outgoings are MCB's complete all as specified and as directed.

Supply and fixed in repairs distribution board 240V IP 43 protection SPN double door 8 way when incomer and outgoings are MCB's complete all as specified and as directed.

Supply & fixed in repairs MCBs suitable for fixing in MCB DB 'C' series complete all as specified and as directed for the following :-

MCB FP 50A, 10 KA.

MCB DP 6-32 A, 230 volts

MCB SP 6-32A, 230 volts.

M&L for making hole in brick masonary suitable for exhaust fan of size upto 230 mm and making good and S&Fin repairs louver suitable for exhaust fan 230 mm sweep complete all as specified and as directed .

Supply and fixing of energy efficient, 30 W LED street light fitting with die cast aluminium heat sink, driver, high power LEDs as light source and and lens embedded PC cover having IP65 protection and Impact resistance of IK07 with 10KV Built-in Surge Protection Device complete accessories, fitted to and including 25mm dia, medium grade GI pipe bracket of 1.0 m long with fixing clamps and copper flexible wire from ceiling rose to fitting complete all as specified and as directed. Make:- Havells Model No: ENDURACITYLITEPLAT PLUSSL30WLED757SASYBOPC or equivalent approved make.

M&L for earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 Mtr below ground with top edge of the earth plate not less than 1.5 mtr below normal ground level, Earth plate shall be connected with double bolts, nuts, check nuts & washers, to & including 25x4 mm galvanized iron strip as earth lead, extended upto 7.5 m or upto test terminal point, drawn through 40mm dia med. gr. GI pipe for protection of galvanized iron strip in the ground, including excavation, earth work, Charcoal & Salt all as specified, PCC chamber, RCC cover slab, watering pipe 20mm dia bore med. grade, wire net, funnel etc. & testing on completion all as specified in plate No.3 of SSR Pt-I, complete including old unserviceable earth pit complete all as specified and as directed . NOTE :- (a) GI Pipe for protection of earthing strip and earth strip beyond 7.5 mtr or test point shall be measured and paid seperately under relevant items.

K P R ENTERPRISES

K LAKSHMAN SINGH AND CO

Indu Electricals

M/S AKSHATHA ENTERPRISES

STANDARD AGENCIES

M/s RAMA LAKSHMI CONSTRUCTIONS

SIRITEL SYSTEMS PRIVATE LIMITED

Dwarka Pershad Radhey Ramanlal

B Sreepathy Rao & Sons