Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.2 LAdmitted-Finance 108 SHAHI HAMDAN COMPLEX MASJID RASOOL S A W BEMINA HAMDANIYA COLONY SRINAGAR JAMMU KASHMIR 190018 UDYAM JK 04 0013447 | SRINAGAR | JAMMU AND KASHMIR | 190018 | ₹8.2 L | L1 | Admitted-Finance |
| 2 | L2₹9.2 LAdmitted-Finance | ₹9.2 L | L2 | Admitted-Finance |
| 3 | L3₹10.0 LAdmitted-Finance | ₹10.0 L | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Reliable Furnishers L3 | M/S NAZIR & COMPANY L1 | MOHAMMAD SADIQ L2 |
|---|---|---|---|---|---|---|
| 1.00 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
(a) For thickness of tiles 10 mm to 25 mm | 30 | One Square meter | 4,500 ₹4,500 | 1,500 ₹1,500 | 1,200 ₹1,200 |
| 2.00 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50metres lead :
(a) Ply board 12 mm Thick | 10 | One Square meter | 1,000 ₹1,000 | 1,000 ₹1,000 | 400 ₹400 |
| 3.00 | Dismantling Gypsum partitions and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. | 40 | One Square meter | 4,800 ₹4,800 | 4,000 ₹4,000 | 1,600 ₹1,600 |
| 4.00 | Dismantling Single glazed aluminium partition walls including disposal of material within 50 metres lead. | 15 | One Square meter | 7,500 ₹7,500 | 1,500 ₹1,500 | 6,000 ₹6,000 |
| 5.00 | Providing and laying of Carpet Tile over the specified area with following specification. The floor which recieves the carpet to be thorougly cleaned as per manufacturer's specification. The carpet is to be laid over a bed of manufacturer's approved adhesive spread evenly over the entire floor. The rate shall include cutting, trimming, fixing and clearing away of residual material to a location as directed. The rate shall also include supplying and laying of a protective layer of PVC or HDPE sheet of 50 microns thickness, held together with scotch tape. The laid carpet to be vacuumed after the removal of protective cover/on commissioning. If after the protective layer is removed and stains observed in the carpet because of in adequate protection, the same shall be shampooed and made good to the satisfaction of the project managers. The measurements of carpet will be the actual laid area. (Basic cost of tile : Rs. 200 /sft ) If the basic rates differ by (+-10%), then necessary adjustment shall apply.
(i) Providing & laying carpet tile with following specification:
Make : Desso / Milliken /Hiya
Size : 500mm x 500mm,
Style: Tile carpet Construction : Tufted Textured Loop Fiber
Product: 100% Solution Dye PP Gauge: 39.4/10cm. (1/12),
Finish Pile Thickness: 7.49mm +/- 0.5,
Production yarn weight: 20 oz,
Dye Method: 100% solution Dyed ,
Primary backing: Action Back,
Tuft Bind: As per ASTM Standards,
Delamination Strength: As per ASTM Standards,
Static Control: As per ASTM Standards,
Soil retardant: Protek,
Anti-Microbial:Alphasan Built in Protection,
Moisture Control: Yes,
Electrostatic propensity: less than 3.5KV-Permanent Cond Flammability( Radient Panel ASTM-E-662): >_0.45 ( Class I)
Execution shall be carried out as per approved drawing and direction of E I charge. | 30 | One Square meter | 78,000 ₹78,000 | 1,35,000 ₹1.4 L | 78,000 ₹78,000 |
| 6.00 | "P/F in position GYPSUM board false-ceiling suspended on the G.I. frame work consist of Perimeter channel of size 27mm x 0.5mm. Intermediate channel of size 45mm x 0.5mm thick. Ceiling section of 0.5mm thickness. 12.5mm thick tapered edge gypsum plaster board fixed to ceiling channel with 25mm dry wall screws at 230mm centers Jointed and finished with requisite filler, paper tape, finished with gypsum putty and 2-3 coats of primer suitable for Gypsum plaster boards & finishing the same with 3 coats of acrylic emulsion paint as/app. Rate to include vertical bands of 100mm to 250mm and making necessary cut-outs/openings for light fittings, diffusers etc. All components to be of Gyproc & all spacings should match their recommendation & standards.Note: Measurement for vertical band will be considered part of the ceiling works. No seperate charges shall be paid for vertical bands.Execution shall be carried out as per approved drawing and as per derection of E I charge. | 30 | One Square meter | 39,000 ₹39,000 | 1,20,000 ₹1.2 L | 30,000 ₹30,000 |
| 7.00 | P/F decorative Trap Door in Gypboard ceiling, size upto 1850x1200mm as per service requirement made out of 19 mm thk Boiling Water Resitance plywood and finished with laminate ( Both sides ) , upper side to have Fire retardant Laminate of Merino, the lower side to have 1.0 mm thick Laminate. The trap door edge to have 6-8mm Thick beachwood lipping on all edges, the trap door to be supported on 50mm x 50mm hard wood frame Items complete in all respect including locking / hanging system and finishing as directed. including concealed locking arrangement and opening handles complete with beading etc, Suggested Brand Knauf. (Cost to include necessary cutting of suspended /gypboard,etc & finishing the same) Excution shall be carried out as per approved drawing and direction of E I charge | 2 | Each | 12,000 ₹12,000 | 10,000 ₹10,000 | 10,000 ₹10,000 |
| 8.00 | P/F Aluminium Frame for Paneling of 50x50 mm 1.5mm thickness size consisting of vertical studs & horizontal members wherever required as per manufacturers specs and groove pattern (Max 600 c/c), using Jindal sections, hardwood will be inserted as may be required to fix door frames skirting etc. Quote only for framework. Execution shall be carried out as per approved drawing and direction of E I charge. | 17 | One Square meter | 21,760 ₹21,760 | 30,600 ₹30,600 | 17,000 ₹17,000 |
| 9.00 | P/F Gypsum board panelling - single layer only on one side of the aluminium Framework. 12.5mm tapered edge gypsum plaster board fixed to the aluminium tubes with dry wall screws, jointed and finished with requisite filler, paper tape, finisher and and primer suitable for gypsum plaster boards. All components to be of India Gypsum.(Frame work to be paid separately) Execution shall be carried out as per approved drawing and direction of E I charge | 17 | One Square meter | 10,200 ₹10,200 | 30,600 ₹30,600 | 6,800 ₹6,800 |
| 10.00 | "P/F 100x25mm Double glazed Modular Aluminium Partition System dormakaba ALTERRA Access, Kubik-100DG or equivalent demountable glass partition using 10mm Toughened/ Laminated glass in proprietary natural anodised/Black/ Other colors aluminium sections of size 100mm x 30mm with Concealed sealing (No visible Gasekts/Seals) with acoustic rating of upto 50 dB with third party test certificate. The profile will have Carpert Groove at the Bottom on both sides for accomodating max. 8mm carpets.It should consists of intermediate slim junction profiles for Glass to Glass vertical joints, 90 Degree L Junction and T Junction profiles suitably to be used as per room configuration designs.No VISIBLE Clip Lines to provide clutter free view at both side of section. Optional Profile Bottom Seal pair for additional accoustic if required.Glass thickness - 10+12 (TSG)All Profiles to be with 2 mm Gauge thickness Excluding 20 Micron of Anodizing.Approved Manufacturer: Profiles/Frames black finish: DORMAKABA, Glass : Saint Giobain/Asahi" .Execution shall be carried out as per approved drawing and direction of E I charge. | 23 | One Square meter | 3,10,500 ₹3.1 L | 1,03,500 ₹1.0 L | 2,76,000 ₹2.8 L |
Tender Value
₹12.9 L
EMD Value
₹25,788
Closing Date
16 May 2026, 6:00 pmClosed
EE (C)
EE(C) BSNL Civil division-II Atul Grove road New delhi
Civil works for proposed Visitors Room in the office of Secretary T DoT at 2nd Floor Sanchar Bhawan 20 Ashoka Road New Delhi
2026_BSNL_276840_1
06/EE/BCD-II/AB/ND/2026-27
Open Tender
Civil Works
30 days
Ashoka road sanchar Bhawan New delhi
Please refer Tender documents.
4 documents required · 4 mandatory
₹590
AO (Cash)
₹25,788
19 May 2026
8 May 2026
18 May 2026
8 May 2026
16 May 2026
8 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
(a) For thickness of tiles 10 mm to 25 mm | 30 | One Square meter | - | - | item01 |
| 2 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50metres lead :
(a) Ply board 12 mm Thick | 10 | One Square meter | - | - | item02 |
| 3 | Dismantling Gypsum partitions and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. | 40 | One Square meter | - | - | item03 |
| 4 | Dismantling Single glazed aluminium partition walls including disposal of material within 50 metres lead. | 15 | One Square meter | - | - | item04 |
| 5 | Providing and laying of Carpet Tile over the specified area with following specification. The floor which recieves the carpet to be thorougly cleaned as per manufacturer's specification. The carpet is to be laid over a bed of manufacturer's approved adhesive spread evenly over the entire floor. The rate shall include cutting, trimming, fixing and clearing away of residual material to a location as directed. The rate shall also include supplying and laying of a protective layer of PVC or HDPE sheet of 50 microns thickness, held together with scotch tape. The laid carpet to be vacuumed after the removal of protective cover/on commissioning. If after the protective layer is removed and stains observed in the carpet because of in adequate protection, the same shall be shampooed and made good to the satisfaction of the project managers. The measurements of carpet will be the actual laid area. (Basic cost of tile : Rs. 200 /sft ) If the basic rates differ by (+-10%), then necessary adjustment shall apply.
(i) Providing & laying carpet tile with following specification:
Make : Desso / Milliken /Hiya
Size : 500mm x 500mm,
Style: Tile carpet Construction : Tufted Textured Loop Fiber
Product: 100% Solution Dye PP Gauge: 39.4/10cm. (1/12),
Finish Pile Thickness: 7.49mm +/- 0.5,
Production yarn weight: 20 oz,
Dye Method: 100% solution Dyed ,
Primary backing: Action Back,
Tuft Bind: As per ASTM Standards,
Delamination Strength: As per ASTM Standards,
Static Control: As per ASTM Standards,
Soil retardant: Protek,
Anti-Microbial:Alphasan Built in Protection,
Moisture Control: Yes,
Electrostatic propensity: less than 3.5KV-Permanent Cond Flammability( Radient Panel ASTM-E-662): >_0.45 ( Class I)
Execution shall be carried out as per approved drawing and direction of E I charge. | 30 | One Square meter | - | - | item05 |
| 6 | "P/F in position GYPSUM board false-ceiling suspended on the G.I. frame work consist of Perimeter channel of size 27mm x 0.5mm. Intermediate channel of size 45mm x 0.5mm thick. Ceiling section of 0.5mm thickness. 12.5mm thick tapered edge gypsum plaster board fixed to ceiling channel with 25mm dry wall screws at 230mm centers Jointed and finished with requisite filler, paper tape, finished with gypsum putty and 2-3 coats of primer suitable for Gypsum plaster boards & finishing the same with 3 coats of acrylic emulsion paint as/app. Rate to include vertical bands of 100mm to 250mm and making necessary cut-outs/openings for light fittings, diffusers etc. All components to be of Gyproc & all spacings should match their recommendation & standards.Note: Measurement for vertical band will be considered part of the ceiling works. No seperate charges shall be paid for vertical bands.Execution shall be carried out as per approved drawing and as per derection of E I charge. | 30 | One Square meter | - | - | item06 |
| 7 | P/F decorative Trap Door in Gypboard ceiling, size upto 1850x1200mm as per service requirement made out of 19 mm thk Boiling Water Resitance plywood and finished with laminate ( Both sides ) , upper side to have Fire retardant Laminate of Merino, the lower side to have 1.0 mm thick Laminate. The trap door edge to have 6-8mm Thick beachwood lipping on all edges, the trap door to be supported on 50mm x 50mm hard wood frame Items complete in all respect including locking / hanging system and finishing as directed. including concealed locking arrangement and opening handles complete with beading etc, Suggested Brand Knauf. (Cost to include necessary cutting of suspended /gypboard,etc & finishing the same) Excution shall be carried out as per approved drawing and direction of E I charge | 2 | Each | - | - | item07 |
| 8 | P/F Aluminium Frame for Paneling of 50x50 mm 1.5mm thickness size consisting of vertical studs & horizontal members wherever required as per manufacturers specs and groove pattern (Max 600 c/c), using Jindal sections, hardwood will be inserted as may be required to fix door frames skirting etc. Quote only for framework. Execution shall be carried out as per approved drawing and direction of E I charge. | 17 | One Square meter | - | - | item08 |
| 9 | P/F Gypsum board panelling - single layer only on one side of the aluminium Framework. 12.5mm tapered edge gypsum plaster board fixed to the aluminium tubes with dry wall screws, jointed and finished with requisite filler, paper tape, finisher and and primer suitable for gypsum plaster boards. All components to be of India Gypsum.(Frame work to be paid separately) Execution shall be carried out as per approved drawing and direction of E I charge | 17 | One Square meter | - | - | item09 |
| 10 | "P/F 100x25mm Double glazed Modular Aluminium Partition System dormakaba ALTERRA Access, Kubik-100DG or equivalent demountable glass partition using 10mm Toughened/ Laminated glass in proprietary natural anodised/Black/ Other colors aluminium sections of size 100mm x 30mm with Concealed sealing (No visible Gasekts/Seals) with acoustic rating of upto 50 dB with third party test certificate. The profile will have Carpert Groove at the Bottom on both sides for accomodating max. 8mm carpets.It should consists of intermediate slim junction profiles for Glass to Glass vertical joints, 90 Degree L Junction and T Junction profiles suitably to be used as per room configuration designs.No VISIBLE Clip Lines to provide clutter free view at both side of section. Optional Profile Bottom Seal pair for additional accoustic if required.Glass thickness - 10+12 (TSG)All Profiles to be with 2 mm Gauge thickness Excluding 20 Micron of Anodizing.Approved Manufacturer: Profiles/Frames black finish: DORMAKABA, Glass : Saint Giobain/Asahi" .Execution shall be carried out as per approved drawing and direction of E I charge. | 23 | One Square meter | - | - | item10 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.82 MB
BOQ_323359.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid