Furniture Works at Various places in ACTREC

Amount

COMPUTETR TABLEProviding making & supplying computer table made out fo 19mm commercial ply for table top, mounted on the vertical side fo 19mm commercial ply and cabinet made out of 19mm commercial ply for sides, shelves & shutters making concealed monitor arrangement by providing 8mm thick clea r glass on table top of required size with edge polish as shown in drawing drawer and ready made key board drawer with heavy sliding channels with powder coated handle for shutter,cable manager drawers all edges shall be lipped with 6mm thick T.W. lipping patti. All exposed faces should be 1.5mm thk laminate of approved colour and non laminated area should be french polished inclu. cost of other materials labor etc. as per drawing and as specified and directed by Engineer-In-Charge. Computer Table with all inner surface with 1mm thk approved laminate.

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. Complete : Hot finished welded type tubes

WOODEN CABINETProviding & fixing cabinet made up of 19 mm. Commercial ply of approved make for top, bottom, sides & shelves & 8mm commercial ply approved make for back side Door shutter made up of 19mm thick commercial ply and outer surfaces and top of shelves for open type cabine should be laminated with 1.5mm thick approved plastic laminate sheet of required colour including all brass fittings such as hinges, tower bolts, ball catches, stopper, handle, kNosbs as per shown in drawing or approved by Engineer-In-Charge etc.and all exposed edges lipping with 6mm Thick T.W. lipping patti.locking arrangement with Godrej multipurpose lock etc. all complete as specified & directed by Engineer-In-Charge. Open type with inner side 0.8mm thk Laminate

WOODEN CABINETProviding & fixing cabinet made up of 19 mm. Commercial ply of approved make for top, bottom, sides & shelves & 8mm commercial ply approved make for back side Door shutter made up of 19mm thick commercial ply and outer surfaces and top of shelves for open type cabine should be laminated with 1.5mm thick approved plastic laminate sheet of required colour including all brass fittings such as hinges, tower bolts, ball catches, stopper, handle, kNosbs as per shown in drawing or approved by Engineer-In-Charge etc.and all exposed edges lipping with 6mm Thick T.W. lipping patti.locking arrangement with Godrej multipurpose lock etc. all complete as specified & directed by Engineer-In-Charge. Open type with inner side 0.8mm thk Laminate With shutter

GRANITE: Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for furnitures and similar locations of required size of approved shade, colour and texture as per the direction with all neccessary adhesives, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

LAB TABLE Providing, fabricating and fixing at required location Lab type table consist of i) Table top of 750mm wide 50mm thick solid commercial block board with 6mm TW lipping to all exposed edges around the table tops also to have front facia75mm deep with 20mm thick commercial ply of approved make with 6mm thick T.W.lipping & 19mm thick work commercial ply for support as per required at site or as shown in drawing with 6mm thick T.W.lipping patti for all exposed edges. All exposed surfaces should be 1.5mm thhick approved plastic laminated and all the surfaces to be laminated wherever required in general with 1mm thick lamination .

MOULDINGProviding edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite moulding work

OPEN SHELFProviding and fixing in position shelf of required size made of 19mm thick ply of approved make with T.W.lipping patti of 6mm thick of required size to all exposed surface with 1.5mm approved laminated on top of the shelf mounting over the bracket made out of 40mm x 40mm T.W section bracket with french polish to all Nosn laminated surface with bracket.Etc.complete all specified and directed by Engineer-in-Charge. Shelf made out by 19mm plywood with brackets at 1.00 m center to center.

Providing & making of fully drawer storage unit made up of 19mm thk. Commercial plywood with heavy duty sliding channel & with 6mm thick commercial plywood for back . 19mm plywood for top, bottom, front of shelves. Side of the drawer to be of 12mm thick & bottom to be as per the requirement. 1mm thick approved laminate to be fixed on exposed surfaces of unit. All faces to be laminated. Including items such as lock, hinges, tower bolt, handle to be of heavy duty & approved make only.

EXAMPLE INTERIOR DESIGNS

RAJSHREE CONSTRUCTION CONSORTIUM

JAYLAXMI ENTERPRISE

arcoma