Under District Ayodhya, Construction of toilet and Maintenance of Shri Anant Inter College, Khapradih at Khand-Tarun, Lot No 3

Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. AS per DSR 15.40

Demolishing brick work manually by mechanical in lime mortar As per DSR 15.7.3

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). AS per DSR 5.3

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). AS per DSR 5.3

Providing and laying of R:C:C 1:1.5:3 ( 1 cement:1.5 coarse sand (Zone-III) derived from natural sources:3 graded stone aggregate 20mm nominal size derived from natural sources As per DSR 5.1.2 pg 113 vol 1 (2023) in plinth band

Brick wrok 1:6 cement: coarse sand with common burnt clay F.P.S (non modular ) bricks of class designation 7.50 in super structure above plinth level Asper DSR 6.4.2 pg 127 vol1 2023

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : As per DSR 15.12.1

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). AS per DSR 5.3

M.S iron work for R:C:C work as per DSR 5.22A.6 pg 118 vol 1(2023)

Steel work welded in built up sections /framed work , including cutting hoisting fixing in position and applying a priming coat in gratings frames , guard bar ladder ,railing,brackets gates and simlar works. AS per DSR 10.25.2 pg 185 vol 1 (2023)

Providing & fixing of 30mm thick flush door shutter AS per DSR 9.20.2 pg 150

Providing & fixing of 30mm thick flush window shutter AS per DSR 9.20.2 pg 150

Supply & fixing of Aluminium fittings

Sliding bolts 250x16mm DSR 9.96.2 pg 158 vol 1(2023)

Door handle 125 mm Long DSR 9.100.1 pg 158 vol 1(2023)

Door stoppers DSR 9.101.1 pg 159 vol 1(2023)

Tower Bolt 200 x 10 mm DSR 9.97.3pg 158 vol 1(2023)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. As per DSR 15.56

12mm thick plaster 1:6 cement : coarse sand mortar AS per DSR 13.4.2 pg 217 vol 2 (2023)

Provinding & applying white cement based putty of average thickness 1mm of approved brand and manufacture over the plastered well surface to prepare the surface even and smooth complete As per DSR 13.80 pg 223vol 2 (2023)

Finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade AS per DSR 13.47.1 pg 220 vol 2 (2023)

Wall painting with premium acrylic emulsion paint of interior grade, having VOC ( volatile organic compound) content less than 50 grams / litre of approved brand and manufacture including applying additional coats wherever required to achieve even shade and colour. AS per DSR 13.83.2 pg 223 vol 2 (2023)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give and even shade as per DSR 13.62.1 pg 222 vol 2 (2023)

P/F fly proof stainless steel grade 304 wire gauge to windows and clerestory windows AS per DSR 9.135.1 pg 166 vol 1 2023

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand) : AS per DSR 11.26.1 25 mm thick

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Providing and laying integral cement based water proofing treatment including preparation (a) (b) to of surface as required treatment of roofs, balconies, terraces etc consisting of following operations: Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. Laying brick bats with mortar using broken bricks/brick bats 25 mm 115 to mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to |S : 2645 and approved by Engineer-in-charge. (d) 1:4 Finishing the surface with 20 mm thick jointless cement mortar of mix (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.AS per DSR 22.70.1 pg 332

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with of be 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat neat cement, rounding the edges and making and finishing the outlet complete. As per DSR 12.22 pg 203

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 12.41.1 75 mm diameter

Supply & fixing of Bend 75mm dia DSR 12.42.5.1 pg 205

Providing and laying vitrified floor tiles 600x600mm in t sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. AS per DSR 14.41.2

Deduct 30% old useful bricks

Wiring for light point/fan point with 1.50 sqmm FRLS PVC insulated copper conductor single core cable As per DSR 1.10.1 group A pg 2 2022

Wiring for circuit/ submain wiring

2x1.50sqmm + 1x1.50sq mm earth wire 1.14.1

2x4sqmm + 1x4sq mm earth wire 1.14.3

SITC of 1200mm sweep bee 5 star rated ceiling fan with (BLDC) As per DSR (E&M)19.1 pg 72 2022

Supply & fixing of two module stepped type electronic fan regulator on the existing modular plate swith box AS per DSR (E&M) 1.25 pg 6 2022

Supply & fixing of MCB 6A to 32 A rating ,TPN MCB "C" curve , 10 KA braking capcity AS per DSR (E&M) 1710 pg82

Earthing with GI earth pipe 4.5 meter long 40mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. AS per DSR 5.1 pg 23 2022

Supplying and laying 25mmx5mm GI strip at 0.50metre below ground as strip earth electrode AS per DSR 5.9 pg 23 2022

S/F of LED Tube light batten fitting suitable for up to 1x22 watt LED tube light on surface complete in all respect AS per SOR1413(A) CAT-AAA

Erection & testing of ceiling fan and regulator for room height up to 3.50 meters including suppy of 3mm thick GI pipe 19mm dia duly painted complete in all respect AS per SOR 1116

Supply & fixing of Hexagonal /round fan box As per SOR 1149

Toilet

Earth work in excavation by mechanical means (Hydraulic excavator manual means over areas (exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and for all lift AS per DSR 2.6.1 pg 91 vol 1(2023)

Laying of C:C 1:4:8 (Zone III) derived natural sources : 8 graded stone aggregate 40mm nominal size derived from natural sources As per DSR 4.1.8 pg 103 vol 1 (2023)

Brick wrok 1:6 cement: coarse sand with common burnt clay F.P.S (non modular ) bricks of class designation 7.50 in foundation and plinth Asper DSR 6.1.2 ph 127 vol1 2023

Banking excavated earth by mechancical / manual means in layers not exceeding 20cm in depth breaking clods, watering ,rolling AS per DSR 2.3.1 pg 91 vol 1 2023

Providing and laying of R:C:C 1:1.5:3 ( 1 cement:1.5 coarse sand (Zone-III) derived from natural sources:3 graded stone aggregate 20mm nominal size derived from natural sources As per DSR 5.1.2 pg 113 vol 1 (2023) in plinth band

Brick wrok 1:6 cement: coarse sand with common burnt clay F.P.S (non modular ) bricks of class designation 7.50 in super structure above plinth level Asper DSR 6.4.2 pg 127 vol1 2023

Brick wrok 1:4 cement: coarse sand with common burnt clay F.P.S (non modular ) bricks of class designation 7.50 in super structure above plinth level Asper DSR 6.4.1 pg 127 vol1 2023

Brick wrok 1:4 cement: coarse sand with common burnt clay F.P.S (non modular ) bricks of class designation 7.50 in Foundation & plinth in Asper DSR 6.1.1 pg 127 vol1 2023

Providing and laying of R:C:C 1:1.5:3 ( 1 cement:1.5 coarse sand (Zone-III) derived from natural sources:3 graded stone aggregate 20mm nominal size derived from natural sources As per DSR 5.1.2 pg 113 vol 1 (2023) in Lintel band

Steel work welded in built up sections /framed work , including cutting hoisting fixing in position and applying a priming coat in gratings frames , guard bar ladder ,railing,brackets gates and simlar works. AS per DSR 10.25.2 pg 185 vol 1 (2023)

RCC work with cement : coarse sand and 20mm stone grit in 1:1.5:3 in slab AS per DSR 5.5 pg 114 vol 1 (2023)

M.S iron work for R:C:C work as per DSR 5.22A.6 pg 118 vol 1(2023)

12mm thick plaster 1:6 cement : coarse sand mortar AS per DSR 13.4.2 pg 217 vol 2 (2023)

12mm thick plaster 1:3 cement : coarse sand mortar AS per DSR 13.9.1 pg 217 vol 2 (2023)

P/L rectified glazed ceramic floor tiles of size 300x300mm or more thickness to be spectified by the manufactured of 1st quality conforming to IS 15622 of approved make in all colours shades except white lvory grey fume red brown laid on 20mm thick cement mortar 1:4 cement: coarse sand mortar DSR NO 11.40 vol 1 pg 194(2023)

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622(Thickness to be specified by the manufacturer) of approved make in all colours, shaed except burgundy, bottle green , black of any size etc. DSR 8.31 vol 1 page 143(2023)

Provinding & applying white cement based putty of average thickness 1mm of approved brand and manufacture over the plastered well surface to prepare the surface even and smooth complete As per DSR 13.80 pg 223vol 2 (2023)

Finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade AS per DSR 13.47.1 pg 220 vol 2 (2023)

Wall painting with premium acrylic emulsion paint of interior grade, having VOC ( volatile organic compound) content less than 50 grams / litre of approved brand and manufacture including applying additional coats wherever required to achieve even shade and colour. AS per DSR 13.83.2 pg 223 vol 2 (2023)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give and even shade as per DSR 13.62.1 pg 222 vol 2 (2023)

Providing & fixing of CPVC pipe etc complete

15mm dia DSR 18.9.1 pg 281 vol 2 2023

20mm dia DSR 18.9.2 pg 281 vol 2 2023

25mm dia DSR 18.9.3 pg 281 vol 2 2023

32mm dia DSR 18.9.4 pg 281 vol 2 2023

Providing & fixing of C.P brass bib cock of approved quality conforming to IS 8931 15mm nominal bore AS per DSR 18.49.1 pg 288 vol 2 2023

Supply of polyethylene water storage tank with cover and suitable locking arrangement As per DSR code 1649 pg 22 vol 1 2023

Providing & fixing of white vitreous china flat back or wall coner type urinal DSR 17.23 pg 268 vol 2 2023

Providing & fixing of white vitreous china water closer long pattern WC pan of size 580mm DSR 17.13.1 pg 267 vol 2 2023

Providing & fixing of white vitreous china flat back wash basin size 550x400mm with single 15mm C.P brass piller tap DSR 17.7.4 pg 266 vol 2 2023

Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) conforming to IS 7231 with all fitting and fixtures complete AS per DSR 17.18.1 pg 268 vol 2 2023

Providing & fixing of mirror 453x357mm rectangular shape DSR 17.32.1 pg 269 vol 2 2023