Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.2 LAccepted-AOC | L1 | Accepted-AOC Quoted L1 | |
| 2 | L2₹21.9 L+₹1.2 L (5.93%)Rejected-AOC HM 324 PHASE IX SAS NAGAR MOHALI PB | L2 | Rejected-AOC Quoted L2 | |
| 3 | L3₹21.9 L+₹1.3 L (6.09%)Rejected-AOC FLAT NO 203 GH 5 SECTOR 27 PANCHKULA 134116 HRY | PANCHKULA | HARYANA | 134116 | L3 | Rejected-AOC Quoted L3 | |
| 4 | L4₹22.9 L+₹2.2 L (10.8%)Rejected-AOC H NO 1566 2 SECTOR 30 B CHANDIGARH | NA | NA | 160001 | L4 | Rejected-AOC Quoted L4 | |
| 5 | L5₹26.0 L+₹5.3 L (25.7%)Rejected-AOC | L5 | Rejected-AOC Quoted L5 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
31 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF CHANDIGARH
GE AF CHANDIGARH, AIR FORCE STATION, CHANDIGARH-160003
REPAIR TO JOINERY AND GLASS PANES IN SECTOR 31 A, B, C AND D AT CHANDIGARH UNDER GE (AF) CHANDIGARH
2023_MES_592352_1
GE (AF)/CHD/T-05/2023-24
Open Tender
Civil Works
Item Rate
183 days
CHANDIGARH
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE AF CHANDIGARH
₹40,000
Yes
7 Jul 2023
29 Apr 2023
6 Jun 2023
29 Apr 2023
31 May 2023
17 May 2023
29 Apr 2023 - 6 May 2023
Amount
M&L for taking down chowkhats with shutters (without taking of shutter from the frame) of any description not exceeding 1.50 Sqm each and making good the disturbed portion in cement mortar (1:4) and finished with similar specification as per existing complete all as specified and directed.
M&L for taking down chowkhats with shutters (without taking of shutter from the frame) of any description exceeding 1.50 Sqm but not exceeding 4.00 Sqm each and making good the disturbed portion in cement mortar (1:4) and finished with similar specification as per existing complete all as specified and directed.
M&L for taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each from chowkhat complete all as specified and directed.
M&L for taking down shutters of any description not exceeding 1 Sqm each from chowkhat complete all as specified and directed.
M&L for re-fixing of shutters of any description not exceeding 1 sqm each in same opening after easing and adjusting and also re-fixing builders hardware as required including renewal of unserviceable screws etc. complete all as specified and directed.
M&L for re-fixing of shutters of any description exceeding 1 sqm but not exceeding 2 sqm each in same opening after easing and adjusting and also re-fixing builders hardware as required including renewal of unserviceable screws etc. complete all as specified and directed.
S&F factory made pressed steel frames for doors with one or more rebates of size 125mm x 60mm made out of 1.25mm thick sheet duly treated with one shop coat of red oxide primer including necessary fixing lugs, hinges, lock strike plate, including cement concrete (1:2:4) with 12.5mm graded stone aggregate in back filling of chowkhat complete all as specified and directed.
S&F factory made pressed steel frames for doors with one or more rebates of size 105mm x 60mm made out of 1.25mm thick sheet duly treated with one shop coat of red oxide primer including necessary fixing lugs, hinges, lock strike plate, including cement concrete (1:2:4) with 12.5mm graded stone aggregate in back filling of chowkhat complete all as specified and directed.
S&F framed work as in doors/ chowkhats or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.
S&F flush shutters 35mm thick, solid core construction with particle board core and plywood face panels commercial type on both sides, duly provided with 6mm thick teakwood lipping on edges alround, fitted to chowkats, complete all as specified & directed.
S&F factory made panel shutter 35mm thick of 2nd class hardwood (Hollock) rails and styles, plain framed, paneled shutter (two panels) with lock rail and panel of 9mm BWP commercial ply; the size of rails and stiles as per IS: 1003 (Part-I) and as specified in SSR Part-I section 8 clause 8.24(a) kiln seasoned and chemically pressure treated complete all as specified & directed.
S&F 35mm thick 2nd class hardwood (Hollock) skeleton shutters, open rebated and prepared to receive wire cloth, glass etc. divided into squares with plain, chamfered or rounded, mitred and rebated sash bars; any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire cloth etc., sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) complete all as specified & directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing complete all as specified & directed.
S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face complete all as specified and directed.
S&F 100mm size mild steel butt hinge, medium weight, cold rolled complete all as specified & directed.
S&F 150mm long, aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed.
S&F in repairs 150mm long, aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed.
S&F 125mm long, aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed
S&F 150mm size aluminum anodized ‘D’ type handle all as specified and directed.
S&F in repairs 150mm size aluminum anodized ‘D’ type handle all as specified and directed.
S&F 125mm size aluminum anodized ‘D’ type handle all as specified and directed.
S&F aluminium alloy, anodized, sliding door bolt 300mm long with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F in repairs aluminium alloy, anodized, sliding door bolt 300mm long with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F in repairs door spring 300mm mild steel ordinary rat tail rod pattern including roller & roller plate complete all as specified and directed.
S&F door spring 300mm mild steel ordinary rat tail rod pattern including roller & roller plate complete all as specified and directed.
S&F factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer, including making good to disturbed area during removing and fixing of window with cement mortar (1:4) in cills and jamb area complete all as specified, shown on drawing No CEAF/STD-184-2012 Sheets 1/3 & 3/3 and directed.
S&F factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars, including flat iron 12mm x 3mm for securing wire mesh, dovetailed or welded and with one shop coat of zinc chromate primer including making good to disturbed area during removing and fixing of window with cement mortar (1:4) in cills and jamb area complete all as specified, shown on drawing No CEAF/STD-185-2012 Sheets 1/2 & 2/2 and directed.
S&F factory made box type steel ventilator fixed type, dovetailed or welded and with one shop coat of zinc chromate primer including making good to disturbed area during removing and fixing of window with cement mortar (1:4) in cills and jamb area complete all as specified, shown on drawing No CEAF/STD-186-2012 Sheets 1/1 and directed.
S&F factory made box type steel ventilator with glazed shutter or gauzed shutter with glazing bars or flat iron 12mm x 3mm dovetailed or welded for fixing wire mesh/ glass and with one shop coat of zinc chromate primer including making good to disturbed area during removing and fixing of window with cement mortar (1:4) in cills and jamb area complete all as specified and shown on drawing No CEAF/STD-186-2012 Sheets 1/1 and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks or galvanized wire staples or fixed to wooden frames with first class hard wood beads complete all as specified and directed.
S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks or galvanized wire staples or fixed to wooden frames with first class hard wood beads complete all as specified and directed.
Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins complete all as specified and as directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane including fixing with glass pins to hold glass in position upto 15.00 metre height of building complete all as specified and as directed. Note:- No extra payment for replacement of damaged wooden beads required for glazing glass in wooden window.
S&F 3mm thick figured glass, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sqm in each pane including fixing with glass pins to hold glass in position upto 15.00 mtr height of building, complete all as specified. Note:- No extra payment for replacement of damaged wooden beads required for glazing glass in wooden window.
S&F in repairs drapery rod of mild steel 25mm dia, ribbed/ fancy type, PVC powder coated, any shade, including set of fixing brackets for span not exceeding 2m fixed to wall with PVC finials/ funnels including connected accessories, rubber packing, required screws and PVC rawl plugs complete all as specified and as directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.
S&F steel rolling shutters, without ball bearing with 1.00 mm thickness of lath, as specified including top cover, anchoring rod, hasp & staple and erected in position as indicated, complete push pull or manual type complete all as specified and directed.
M&L for taking down and refixing the same position to existing rolling shutters including repair/ replacement of roller springs, locking device, defective laths etc. as per site including necessary cleaning, welding, oiling/ greasing complete all as specified and as directed.
S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted or forged into spikes; framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
Dismantling boarding any description fixed in any position with nails complete all as specified and directed.
S&F 18mm/ 19mm thick pre-laminated particle board, interior grade, pre-laminated both sides with decorative choice lamination for wooden and fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18mm wide 6mm thick beading of 1st class HW (Teak) all around complete all as specified and directed.
S&F continuous (piano) hinges, stainless steel, bright finish or electro galvanised, 30mm wide flap (when open) complete all as specified and directed.
S&F 100mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F 100mm size aluminum anodized ‘D’ type handle all as specified and directed.
S&F 40mm dia cupboard knobs of brass, bright finished and fixed with nut, washers/ screws etc., , complete all as specified and directed.
S&F magnet catcher suitable for kitchen cabinet/ cupboard with steel plate and stainless steel as required complete all as specified and as directed.
S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S&F in repair floor door stopper 140mm (overall cover plate length of cover plate) of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.
M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
M&L for preparation of new surfaces of steel of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of new surfaces of steel of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
Demolition of brick masonry in any position built in any cement mortar complete all as specified and directed.
M&L brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:4) complete all as specified and directed.
All as per item No. 53.00 above but except bricks. Note:- Serviceable bricks retrieved from Serial item No. 52.00 above shall be used after cleaning.
Taking down cement plaster from brick walls, concrete surfaces and the like including raking out joints, hacking for key, scrubbing down with water etc., including removal of rubbish outside MoD land complete all as specified and directed.
M&L for rendering 15mm thick on brick or concrete surfaces (such as top & sides of chajjas, beams, balcony fascia etc.) in cement mortar (1:4) finished fair and even complete all as specified and directed. Note: The rate quoted by contractor shall be deemed to include for necessary scaffolding and formwork as required upto triple storey of building height.
M&L for rendering 15mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed. Note: The rate quoted by contractor shall be deemed to include for necessary scaffolding and formwork as required upto triple storey of building height.
M&L for rendering 10mm thick in cement mortar (1:3) as on ceiling of concrete surface (such as chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement complete all as specified and directed. Note: The rate quoted by contractor shall be deemed to include for necessary scaffolding and form work as required upto triple storey of building height.
M&L preparation of new plastered surfaces and applying two coats of oil bound distemper over and including 1mm thick wall care putty to smoothening the surface complete all as specified and directed.
M&L for preparation of newly plastered or un plastered ceiling surfaces of any description and applying three coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and directed.
M&L first quality joint free non skid ceramic coloured tiles, 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm laid in floors with neat cement slurry @ 3.00 kg/ Sqm laid over and including 15mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles complete all as specified and directed. Note: Tile work to be executed in any position or in patches or as per site requirements.
M&L for joint free glazed ceramic (digital glossy finish) coloured tiles 350mm x 450mm x 7 to 8mm thick on vertical surface such as skirting/ dado etc. set and jointed in neat cement slurry and pointed in white/ colour cement to match fixed on and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and directed. Note: Tile work to be executed in any position or in patches or as per site requirements.
S&F door seal 50mm wide and 1 m in length built of aluminium black plate with nylon brush fixed with screws complete all as specified and directed.
Dismantling of framed work i.e. fillets, rails, posts, rafters, purlins etc. under 40 Sqcm in section complete all as specified and directed.
S&F second class hard wood plain fillets square, rectangular or triangular in section of sectional area exceeding 13 & not exceeding 25 sqcm, clean sawn, wrought finished secured with screws complete all as specified and directed.
S&F in repairs 40mm dia cupboard knobs of brass, bright finished and fixed with nut, washers/ screws etc. complete all as specified and directed.
M&L welding in repairs exceeding 2.5cm but not exceeding 5.00cm in length and thickness of metal to be welded not exceeding 6mm including cleaning, preparing the surfaces and holding the member in true position for maintenance of steel items such as gates, grills, doors, window etc. complete all as specified and directed.
S&F in repairs 1mm mild steel, plain, black sheet in hearths, covering to door shutters, covering to door chowkats (frames), chullah hoods, water tanks, water troughs, ducts, urinal troughs and funnels etc. cut to size, edges beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required, complete all as specified and directed.
Demolition of cement concrete (reinforced) (reinforcement cut as required to facilitate demolition) of any description and in any position (below or above ground level), any thickness and any length, including removal of rubbish outside MoD land upto 15 metre building height complete all as specified and directed.
M&L reinforced cement concrete (1:1½:3) type A-1 (using 20mm graded crushed stone aggregates) as in lintel beams, roof beams, lintel bands, chajjas and the like complete all as specified and directed.
S&F mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending etc. and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels beam, lintel bands, cantilevers, shelves, tank platform, chajja, balconies, facia including supports, overhangs, etc. also splays between floors and beams, etc with flat rough finished surfaces of concrete, complete all as specified and directed.
M&L for resecuring of existing window glass panes by using oil putty/ wooden beading as required complete all as specified and directed.
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc (Fe 410-w, Gde-E-250 quality A) including preparation of surface and applying one shop coat of zinc chromate primer paint at contractor's workshop before fabrication complete all as specified and directed.
Dismantling Asbestos cement/ Galvalume/GI (corrugated, semicorrugated, etc.) sheets in roof coverings of any gauge, thickness, including Nainital or similar pattern complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, sunshed etc fixed with self tapping screws complete all as specified and directed.
Taking down hanging mild steel gate exc 1.00 Sqm but not exceeding 4.00 Sq.m each and refixing in the same opening after carrying out necessary repair work with welding such as change of rusted hold fast, hinging device, pintol hinges, pivotel and locking arrangement, PCC of hold fast etc complete all as specified and directed.
M & L for cutting holes in brick walls built in cement mortar for inserting hold fasts, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exceeding half brick but not exceeding one brick and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 AS required, complete all as specified and directed Note: Item applicable for insertion of hold fasts at new position only.
M/S MATLOOB AHMED
B N FRIENDS AND CO
MOHAMMAD RASHID
M/S Bangali Ram
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .