Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.8 CrAdmitted-Finance | -5.78% | ₹1.8 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.9 Cr+₹10.9 L (6.13%)Admitted-Finance | +0.00% | ₹1.9 Cr+₹10.9 L (6.13%) | L2 | Admitted-Finance |
| 3 | L2₹1.9 Cr+₹10.9 L (6.13%)Admitted-Finance AT BELTIKIRI SADAR DHENKANAL | +0.00% | ₹1.9 Cr+₹10.9 L (6.13%) | L2 | Admitted-Finance |
| 4 | L2₹1.9 Cr+₹10.9 L (6.13%)Admitted-Finance A PO BADAPOKHARIA NILIGIRIPATNA TANGI | TANGI | CUTTACK | ODISHA | 752019 | +0.00% | ₹1.9 Cr+₹10.9 L (6.13%) | L2 | Admitted-Finance |
| 5 | L2₹1.9 Cr+₹10.9 L (6.13%)Admitted-Finance | +0.00% | ₹1.9 Cr+₹10.9 L (6.13%) | L2 | Admitted-Finance |
Tender Value
₹1.9 Cr
EMD Value
₹1.9 L
Closing Date
4 Apr 2026, 5:30 pmClosed
CCE Cuttack RandB Circle
O/o CCE Cuttack RandB Circle
Road work
2026_EICCL_127501_5
CCE.Ctc.(RandB)17/2025-26
National Competitive Bid
Civil Works - Roads
Percentage
90 days
Cuttack
As per DTCN
3 documents required · 3 mandatory
₹10,000
₹1.9 L
Yes
19 Jun 2026
23 Mar 2026
6 Apr 2026
23 Mar 2026
4 Apr 2026
23 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor @ 0.2kg. per sqm.on the prepared bituminous/granular surface cleaned with mechanical broom as per Clause 503 of MORT&H Specification for Road & Bridge works. | |||||
| 2Providing and laying 25 mm thick av. compacted Semi Dense Bituminous Concrete (Grading-II) using VG-30 grade Bitumen and crusher broken hard granite aggregates of specified grading, premixed with bituminous binder @ 5.0 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paverfinisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause No.501, 508 and section 900 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (Latest Revision) | |||||
| 3Providing and laying 25 mm thick Mastic asphalt wearing course with paving grade bitumen meeting the requirements given in Table 500-39, prepared by using Mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of 13.2 mm nominal size at the rate of 0.005cum per 10sqm and at an approximate spacing of 10cm c/c in both directions, pressed into surface when the temperature of the surface is not less than 1000C, protruding 1 mm to 4 mm over mastic surface all complete as per clause No.516 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (Latest Revision) | |||||
| 4Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. | |||||
| 5Providing and fixing of bidirectional retro reflective raised pavement markers of approved colour, quality and make conforming to ASTM D-4280 made from injection moulded high impact polymer including cleaning, preparation of surface and fixing at position with approved quality adhesives including cost of all materials, labour, tranportation, taxes, duties, sundries t&P etc complete and as per direction of Engineer-in-charage. | |||||
| 6 | Providing and errecting direction and place identification retro reflective sign as per IRC 67 made of high intensity grade sheeting as per clause no 801.3 fixed over aluminium sheeting, 2m thick with area exceeding 0.9sqm supported on a mild steel angle Iron post 75x75x6mm , 2nos firmly fixed to the ground by means of properly designed foundation with M15 grade of concrete 45x45x60cm below ground level as per approved drawing. - Informatory Sign-800 mmx600 mm | - | each | 6,833.13 | - |
| 7(iii) Advance direction/Destination/Place identification signs (1800x1200 mm)(above 0.90 sqm) | |||||
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.09 MB
DTCN.pdf
Tender Documents • 0.54 MB
BOQ_585879.xls
BOQ • 0.44 MB
Clarification_OM.pdf
Additional Documents • 2.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .