Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹36.8 L
Closing Date
24 Aug 2024, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Public Works Department
R CHANDRASHEKAR
CONSTRUCTION OF FARM/AGRI INNOVATION CENTRE AT ELECTRONIC CITY PHASE-1, BENGALURU
PWD/2024-25/BD/WORK_INDENT11232
PWD/2024-25/BD/WORK_INDENT11232
Open
Buildings
Two Tender Document System(Two Cover)
PWD Division Office Bengaluru
7 documents required · 7 mandatory
3.2 (b) Mandating satisfactory completion as a prime contractor for at least one similar work to an extent of 50% of the cost of the work, such as Building work of value not less than Rs. 1842 Lakhs
3.2(c) Executed in any one year, the following minimum quantities of work usually 80 percent of the peak annual rate of construction Earth work excavation / Embankment----------9171.00 Cum, RCC /PCC------6295.00 Cum, TMT FE 550 / 550D Steel -----780.00 Tonne, M.S./Stainless steel------11561.00 Kgs, Cement plaster-------18010.00 Sqm, Ceramic glazed wall tiles /alkali resistant tiles /Glazed Vitrified tiles/ Vinly/Polished Granite stone flooring ------9194.00 Sqm, Vision glass panels (IGUs) -------2049.00 Sqm, PAINTAINING (EXTERNAL & INTERNAL) / PRIMER / PUTTY---------67452.00 Sqm, Unitized system of structural glazing-----2739.00 Sqm & Autoclaved Aerated Cement Block masonry /Cement blocks masonry/BBM---1153.00 Cum
3.2(d) The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totaling Rs.110 lakhs (usually not less than 50% of the electrical works) in any one year and the Tenderer or his identified sub contractor should possess required experience regarding firefighting works for executing building Fire Works and should have executed similar firefighting works amounting Rs.111 lakhs usually not less than 50% of the fireworks in any one year
3.2(e)The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works totaling Rs. 87.00 lakhs in any one year.
3.3 (a) Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded Owned: Self loading weigh batch concrete mixer-- 02 No, Transit mixer------03 Nos, Tippers /HGV------ 03 Nos, Steel shuttering sheets & jacks -----3000.00 Sqm, Water tankers ------ 03 Nos, Needle/Plate/ Pin vibrator--------06 Nos ,Excavators ------02 Nos & Building Material Hoister -----------01 Nos, Lease/Hired/Rented: Self loading weigh batch concrete mixer ------------- 04 No, Tippers /HGV------------- 02 Nos, Steel shuttering sheets & jacks -------- 1300.00 Sqm, Vibratory Roller -----------01 Nos, Water tankers -------- 02 Nos, Needle/Plate/ Pin vibrator -----03 Nos, Excavators -----------02 No, Transit mixer-------- 01 Nos, Tower Crane of 50M boom length ---01 Nos & Diesel Generators --- 02 Nos
3.2(a) To qualify for award of this contract, each Tenderer in his name should have in the last five years 2019-20 to 2023-24 (a)achieved in at least two financial years a Minimum financial turn over (in all classes of civil engineering construction works only of Rs.4912.00 lakhs.
3.3(b)Liquid assets and /or availability of credit facilities of no less than Rs. 614.00 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. (usually the equivalent of the estimated cash flow for three months in peak construction period).
₹7,500
₹36.8 L
25 Jul 2024
25 Jul 2024
26 Aug 2024
19 Aug 2024
12 Aug 2024
Earth work in surface excavation by mechanical means for lowering & leveling
the ground for all works other than foundation in all kinds of soils & upto depth
not exceeding 300mm as per drawing and te...
Earth work excavation for Foundation by mechanical means for all works &
depth upto 3 m, as per drawing and technical specifications, including setting
out, shoring, strutting, barricading, caution li...
Providing and injecting chemical emulsion for Pre-constructional
Anti-Termite Treatment, creating continuous chemical barrier under
and around the column pits, walls, trenches, basement excavation, to...
Earth work excavation for Foundation by mechanical means for all works &
depth upto 3 m, as per drawing and technical specifications, including setting
out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works.
The granite/trap/basalt crushed graded coarse aggregates and fine aggregates
as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Sub structures of
building, Irrigation works, Sub structure works of bridges, Drain works &
other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in Cement Concrete for all Basement & surface level
works, return walls, retaining walls, sunken floors etc. The granite/trap/
basalt crushed graded coarse aggregates and fine agg...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tyin...
Filling available excavated earth (excluding rock)
in trenches, plinth, sides of foundations and other
similar works etc. in layers not exceeding 20cm in
depth, consolidating each deposited layer by r...
Providing and laying autoclaved aerated cement blocks masonry with
150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in
super structure above plinth level up to floor I level with RCC band...
Providing and laying Autoclaved Aerated Cement blocks masonry with
100 mm thick AAC blocks as per IS 2185 (Part III) in super structure
above plinth level up to floor I level in cement mortar 1:4 (1 c...
Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners
wherever required smooth rendering, providing and removi...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:
6 fine sand) including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including cost of m...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:
15622 (thickness to be specified by the manufacturer), of approved make,
in all colours, shades except burgundy, bottle gre...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved
make and colour using acid and/or alkali resisting mortar bedding
for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered
wall surface to prepare the surface even and smooth complete as per
Applying one coat of water thinnable cement primer of approved brand
and manufacture on wall surface :Water thinnable cement primer to give
an even shade after thoroughly brooming the surface to remov...
Finishing walls with textured exterior paint of required shade :New work
(Two coats applied @ 3.28 L/10 m²) over and including priming coat of
exterior primer applied @ 2.20kg/10 m² to give an even ...
Wall painting with premium acrylic emulsion paint of interior grade,
having VOC (Volatile Organic Compound ) content less than 50 g/L of
approved brand and manufacture, including applying additional c...
Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat with
approved steel primer all complete. Fixed to steel...
Providing and fixing fixing of 2track x 2panel sliding windows made out of multi
chambered UPVC(Matching to RAL9016) sections and with minimum
TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic El...
Providing & fixing of louvered ventilator made out of multi chambered
UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium
Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Extra for openable side / top hung vision glass panels (IGUs) including
providing and supplying at site all accessories and hardwares for the
openable panels as specified and of the approved make such...
Providing Red Salwood frames of doors, windows, clerestory windows,
ventilators and other frames, wrought, framed or assembled including
making plaster groves (excluding cost of cement concrete and si...
Providing and fixing flush door shutter made out of solid core block board
type, well seasoned , chemicaly treated hard wood battens and internal
frame with minimum 45 mm wide wooden frame alround doo...
Providing & fixing Factory made single extruded Wood Polymer Composite (WPC) solid door/window, clerestory windows & frames /chowkhat of frame Size 62 x 100mm ---- Including all lead lifts loading unl...
Providing and laying Polished Granite stone flooring in required design
and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 m...
Providing and laying Polished Glazed Vitrified tiles with thickness 10
mm in floor with different sizes with water absorption less than 0.08%
and conforming to IS:15622, of approved brand & manufactur...
Providing, laying, spreading and compacting graded stone
aggregate to wet mix macadam specification including premixing
the Material with water at OMC in mechanical mix plant carriage
of mixed Materia...
Construction of M40 Grade un-reinforced, dowel jointed,
plain cement concrete pavement over a prepared sub base in
recommended proportions, coarse and fine aggregate conforming
to IS 383:2016, maximum...
Designing, fabricating, testing, protection, installing and fixing in position
semi (grid) unitized system of structural glazing (with open joints) for This item includes cost of all inputs of designi...
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision
panel units of size and shape as required and specifi...
Extra for openable side / top hung vision glass panels (IGUs) including
providing and supplying at site all accessories and hardwares for the
openable panels as specified and of the approved make such...
Extra for providing grilled rolling shutters manufactured out of 8 mm dia
M.S. bar instead of laths as per design approved by Engineer- in- charge,
(area of grill to be measured) including cost of mat...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow
tubes, channels, plates etc., including welding, grinding, buffing, polishing
and making curvature (wherever required) and fitt...
Providing and laying 3.5mm thick imported vinyl flooring of approved quality,colour and design ,laid with an approved adhesive on slab floor,strecting cutting and fixing after cleaning of surface free...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm
(thickness to be specified by the manufacturer) of 1st quality conforming
to IS : 15622 of approved make in colours such as White, ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying autoclaved aerated cement blocks masonry with
150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in
super structure above plinth level up to floor I level with RCC band...
Providing and laying Autoclaved Aerated Cement blocks masonry with
100 mm thick AAC blocks as per IS 2185 (Part III) in super structure
above plinth level up to floor I level in cement mortar 1:4 (1 c...
Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners
wherever required smooth rendering, providing and removi...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:
6 fine sand) including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including cost of m...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:
15622 (thickness to be specified by the manufacturer), of approved make,
in all colours, shades except burgundy, bottle gre...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved
make and colour using acid and/or alkali resisting mortar bedding
for Bathrooms: Toilet: Chemically exposed areas and jo...
Finishing walls with Acrylic Smooth exterior paint of required shade :New
work (Two coat applied @ 1.67L/10 m² over and including priming coat of
exterior primer applied @ 2.20 kg/10 m²) with paint ...
Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered
wall surface to prepare the surface even and smooth complete as per
Applying one coat of water thinnable cement primer of approved brand
and manufacture on wall surface :Water thinnable cement primer to give
an even shade after thoroughly brooming the surface to remov...
Finishing walls with textured exterior paint of required shade :New work
(Two coats applied @ 3.28 L/10 m²) over and including priming coat of
exterior primer applied @ 2.20kg/10 m² to give an even ...
Wall painting with premium acrylic emulsion paint of interior grade,
having VOC (Volatile Organic Compound ) content less than 50 g/L of
approved brand and manufacture, including applying additional c...
Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat with
approved steel primer all complete. Fixed to steel...
Providing & fixing of of 2track x 2panel sliding windows made out of multi
chambered UPVC(Matching to RAL9016) sections and with minimum
TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered
UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium
Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing Red Salwood frames of doors, windows, clerestory windows,
ventilators and other frames, wrought, framed or assembled including
making plaster groves (excluding cost of cement concrete and si...
Providing and fixing flush door shutter made out of solid core block board
type, well seasoned , chemicaly treated hard wood battens and internal
frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing factory made single extruded WPC (Wood Polymer
Composite) solid door/window/Clerestory windows & other Frames/
Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...
Providing and laying Polished Granite stone flooring in required design
and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 m...
Providing and laying Polished Glazed Vitrified tiles with thickness 10
mm in floor with different sizes with water absorption less than 0.08%
and conforming to IS:15622, of approved brand & manufactur...
fabricating, testing, protection, installing and fixing in position
semi (grid) unitized system of structural glazing (with open joints) for
linear as well as curvilinear portions of the building for ...
Providing, assembling and supplying vision glass panels (IGUs) comprising
of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision
panel units of size and shape as required and specifi...
Extra for openable side / top hung vision glass panels (IGUs) including
providing and supplying at site all accessories and hardwares for the
openable panels as specified and of the approved make such...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow
tubes, channels, plates etc., including welding, grinding, buffing, polishing
and making curvature (wherever required) and fitt...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying autoclaved aerated cement blocks masonry with
150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in
super structure above plinth level up to floor I level with RCC band...
Providing and laying Autoclaved Aerated Cement blocks masonry with
100 mm thick AAC blocks as per IS 2185 (Part III) in super structure
above plinth level up to floor I level in cement mortar 1:4 (1 c...
Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners
wherever required smooth rendering, providing and removi...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:
6 fine sand) including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including cost of m...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:
15622 (thickness to be specified by the manufacturer), of approved make,
in all colours, shades except burgundy, bottle gre...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved
make and colour using acid and/or alkali resisting mortar bedding
for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered
wall surface to prepare the surface even and smooth complete as per
Applying one coat of water thinnable cement primer of approved brand
and manufacture on wall surface :Water thinnable cement primer to give
an even shade after thoroughly brooming the surface to remov...
Finishing walls with textured exterior paint of required shade :New work
(Two coats applied @ 3.28 L/10 m²) over and including priming coat of
exterior primer applied @ 2.20kg/10 m² to give an even ...
Wall painting with premium acrylic emulsion paint of interior grade,
having VOC (Volatile Organic Compound ) content less than 50 g/L of
approved brand and manufacture, including applying additional c...
Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat with
approved steel primer all complete. Fixed to steel...
Providing & fixing of of 2track x 2panel sliding windows made out of multi
chambered UPVC(Matching to RAL9016) sections and with minimum
TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered
UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium
Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing Red Salwood frames of doors, windows, clerestory windows,
ventilators and other frames, wrought, framed or assembled including
making plaster groves (excluding cost of cement concrete and si...
Providing and fixing flush door shutter made out of solid core block board
type, well seasoned , chemicaly treated hard wood battens and internal
frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing factory made single extruded WPC (Wood Polymer
Composite) solid door/window/Clerestory windows & other Frames/
Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...
Providing and laying Polished Granite stone flooring in required design
and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 m...
Providing and laying Polished Glazed Vitrified tiles with thickness 10
mm in floor with different sizes with water absorption less than 0.08%
and conforming to IS:15622, of approved brand & manufactur...
fabricating, testing, protection, installing and fixing in position
semi (grid) unitized system of structural glazing (with open joints) for
linear as well as curvilinear portions of the building for ...
Providing, assembling and supplying vision glass panels (IGUs) comprising
of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision
panel units of size and shape as required and specifi...
Extra for openable side / top hung vision glass panels (IGUs) including
providing and supplying at site all accessories and hardwares for the
openable panels as specified and of the approved make such...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow
tubes, channels, plates etc., including welding, grinding, buffing, polishing
and making curvature (wherever required) and fitt...
Providing & supplying Carpet/Mat of 800+ gsm with stain proof, flexible
and super absorbent fibre of good quality as per direction of Engineer
in charge. ---- Including all lead lifts loading unload...
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying autoclaved aerated cement blocks masonry with
150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in
super structure above plinth level up to floor I level with RCC band...
Providing and laying Autoclaved Aerated Cement blocks masonry with
100 mm thick AAC blocks as per IS 2185 (Part III) in super structure
above plinth level up to floor I level in cement mortar 1:4 (1 c...
Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners
wherever required smooth rendering, providing and removi...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:
6 fine sand) including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including cost of m...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:
15622 (thickness to be specified by the manufacturer), of approved make,
in all colours, shades except burgundy, bottle gre...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved
make and colour using acid and/or alkali resisting mortar bedding
for Bathrooms: Toilet: Chemically exposed areas and jo...
8.29 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an ...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...
Applying one coat of water thinnable cement primer of approved brand
and manufacture on wall surface :Water thinnable cement primer to give
an even shade after thoroughly brooming the surface to remov...
Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat with
approved steel primer all complete. Fixed to steel...
Providing & fixing of of 2track x 2panel sliding windows made out of multi
chambered UPVC(Matching to RAL9016) sections and with minimum
TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered
UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium
Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing Red Salwood frames of doors, windows, clerestory windows,
ventilators and other frames, wrought, framed or assembled including
making plaster groves (excluding cost of cement concrete and si...
Providing and fixing flush door shutter made out of solid core block board
type, well seasoned , chemicaly treated hard wood battens and internal
frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing factory made single extruded WPC (Wood Polymer
Composite) solid door/window/Clerestory windows & other Frames/
Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...
Providing and laying Polished Granite stone flooring in required design
and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 m...
Providing and laying Polished Glazed Vitrified tiles with thickness 10
mm in floor with different sizes with water absorption less than 0.08%
and conforming to IS:15622, of approved brand & manufactur...
fabricating, testing, protection, installing and fixing in position
semi (grid) unitized system of structural glazing (with open joints) for
linear as well as curvilinear portions of the building for ...
Providing, assembling and supplying vision glass panels (IGUs) comprising
of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision
panel units of size and shape as required and specifi...
Extra for openable side / top hung vision glass panels (IGUs) including
providing and supplying at site all accessories and hardwares for the
openable panels as specified and of the approved make such...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow
tubes, channels, plates etc., including welding, grinding, buffing, polishing
and making curvature (wherever required) and fitt...
8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as p...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying autoclaved aerated cement blocks masonry with
150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in
super structure above plinth level up to floor I level with RCC band...
Providing and laying Autoclaved Aerated Cement blocks masonry with
100 mm thick AAC blocks as per IS 2185 (Part III) in super structure
above plinth level up to floor I level in cement mortar 1:4 (1 c...
Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners
wherever required smooth rendering, providing and removi...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:
6 fine sand) including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including cost of m...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:
15622 (thickness to be specified by the manufacturer), of approved make,
in all colours, shades except burgundy, bottle gre...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved
make and colour using acid and/or alkali resisting mortar bedding
for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered
wall surface to prepare the surface even and smooth complete as per
Applying one coat of water thinnable cement primer of approved brand
and manufacture on wall surface :Water thinnable cement primer to give
an even shade after thoroughly brooming the surface to remov...
Finishing walls with textured exterior paint of required shade :New work
(Two coats applied @ 3.28 L/10 m²) over and including priming coat of
exterior primer applied @ 2.20kg/10 m² to give an even ...
Wall painting with premium acrylic emulsion paint of interior grade,
having VOC (Volatile Organic Compound ) content less than 50 g/L of
approved brand and manufacture, including applying additional c...
Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat with
approved steel primer all complete. Fixed to steel...
Providing & fixing of of 2track x 2panel sliding windows made out of multi
chambered UPVC(Matching to RAL9016) sections and with minimum
TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered
UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium
Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing Red Salwood frames of doors, windows, clerestory windows,
ventilators and other frames, wrought, framed or assembled including
making plaster groves (excluding cost of cement concrete and si...
Providing and fixing flush door shutter made out of solid core block board
type, well seasoned , chemicaly treated hard wood battens and internal
frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing factory made single extruded WPC (Wood Polymer
Composite) solid door/window/Clerestory windows & other Frames/
Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...
Providing and laying Polished Granite stone flooring in required design
and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 m...
Providing and laying Polished Glazed Vitrified tiles with thickness 10
mm in floor with different sizes with water absorption less than 0.08%
and conforming to IS:15622, of approved brand & manufactur...
fabricating, testing, protection, installing and fixing in position
semi (grid) unitized system of structural glazing (with open joints) for
linear as well as curvilinear portions of the building for ...
Providing, assembling and supplying vision glass panels (IGUs) comprising
of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision
panel units of size and shape as required and specifi...
Extra for openable side / top hung vision glass panels (IGUs) including
providing and supplying at site all accessories and hardwares for the
openable panels as specified and of the approved make such...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow
tubes, channels, plates etc., including welding, grinding, buffing, polishing
and making curvature (wherever required) and fitt...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying autoclaved aerated cement blocks masonry with
150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in
super structure above plinth level up to floor I level with RCC band...
Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners
wherever required smooth rendering, providing and removi...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:
6 fine sand) including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including cost of m...
Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered
wall surface to prepare the surface even and smooth complete as per
Applying one coat of water thinnable cement primer of approved brand
and manufacture on wall surface :Water thinnable cement primer to give
an even shade after thoroughly brooming the surface to remov...
Finishing walls with textured exterior paint of required shade :New work
(Two coats applied @ 3.28 L/10 m²) over and including priming coat of
exterior primer applied @ 2.20kg/10 m² to give an even ...
Wall painting with premium acrylic emulsion paint of interior grade,
having VOC (Volatile Organic Compound ) content less than 50 g/L of
approved brand and manufacture, including applying additional c...
Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat with
approved steel primer all complete. Fixed to steel...
Providing & fixing of of 2track x 2panel sliding windows made out of multi
chambered UPVC(Matching to RAL9016) sections and with minimum
TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered
UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium
Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
fabricating, testing, protection, installing and fixing in position
semi (grid) unitized system of structural glazing (with open joints) for
linear as well as curvilinear portions of the building for ...
Providing, assembling and supplying vision glass panels (IGUs) comprising
of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision
panel units of size and shape as required and specifi...
Extra for openable side / top hung vision glass panels (IGUs) including
providing and supplying at site all accessories and hardwares for the
openable panels as specified and of the approved make such...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying autoclaved aerated cement blocks masonry with
150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in
super structure above plinth level up to floor I level with RCC band...
Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners
wherever required smooth rendering, providing and removi...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:
6 fine sand) including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including cost of m...
Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered
wall surface to prepare the surface even and smooth complete as per
Applying one coat of water thinnable cement primer of approved brand
and manufacture on wall surface :Water thinnable cement primer to give
an even shade after thoroughly brooming the surface to remov...
Finishing walls with textured exterior paint of required shade :New work
(Two coats applied @ 3.28 L/10 m²) over and including priming coat of
exterior primer applied @ 2.20kg/10 m² to give an even ...
Wall painting with premium acrylic emulsion paint of interior grade,
having VOC (Volatile Organic Compound ) content less than 50 g/L of
approved brand and manufacture, including applying additional c...
Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat with
approved steel primer all complete. Fixed to steel...
Providing & fixing of of 2track x 2panel sliding windows made out of multi
chambered UPVC(Matching to RAL9016) sections and with minimum
TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered
UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium
Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
fabricating, testing, protection, installing and fixing in position
semi (grid) unitized system of structural glazing (with open joints) for
linear as well as curvilinear portions of the building for ...
Providing, assembling and supplying vision glass panels (IGUs) comprising
of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision
panel units of size and shape as required and specifi...
Extra for openable side / top hung vision glass panels (IGUs) including
providing and supplying at site all accessories and hardwares for the
openable panels as specified and of the approved make such...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Terrace Floor- Head Room
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying autoclaved aerated cement blocks masonry with
150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in
super structure above plinth level up to floor I level with RCC band...
Providing and laying Autoclaved Aerated Cement blocks masonry with
100 mm thick AAC blocks as per IS 2185 (Part III) in super structure
above plinth level up to floor I level in cement mortar 1:4 (1 c...
Providing 15 mm cement plaster on rough side of single or half brick
wall finished with a floating coat of neat cement of mix: 1:4 (1 cement:
4 fine sand) to brick masonry including rounding off corne...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:
6 fine sand) including rounding off corners wherever required smooth
rendering, providing and removing scaffolding, including cost of m...
Finishing walls with Acrylic Smooth exterior paint of required shade :New
work (Two coat applied @ 1.67L/10 m² over and including priming coat of
exterior primer applied @ 2.20 kg/10 m²) with paint ...
Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered
wall surface to prepare the surface even and smooth complete as per
Applying one coat of water thinnable cement primer of approved brand
and manufacture on wall surface :Water thinnable cement primer to give
an even shade after thoroughly brooming the surface to remov...
Wall painting with premium acrylic emulsion paint of interior grade,
having VOC (Volatile Organic Compound ) content less than 50 g/L of
approved brand and manufacture, including applying additional c...
Providing Red Salwood frames of doors, windows, clerestory windows,
ventilators and other frames, wrought, framed or assembled including
making plaster groves (excluding cost of cement concrete and si...
Providing and fixing flush door shutter made out of solid core block board
type, well seasoned , chemicaly treated hard wood battens and internal
frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing factory made single extruded WPC (Wood Polymer
Composite) solid door/window/Clerestory windows & other Frames/
Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...
Providing and laying Polished Granite stone flooring in required design
and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 m...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow
tubes, channels, plates etc., including welding, grinding, buffing, polishing
and making curvature (wherever required) and fitt...
Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the bu...
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specifi...
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the
openable panels as specified and of the approved make such...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Water Supply and Sanitary Works
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : ---- Including all lead lifts load...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25 mm nominal bore ---- Including all lead lifts loading unloading transportation labour hire charges o...
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same...
Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal ---- Including all lead lifts loading unloading transportation labour hire charges of...
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete ...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :40 mm nominal bore ---- Including all lead lifts loading unloadin...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
White vitreous china purpose closet(Anglo indian WC) suitable for use as squatting pan or European type water closet as per manufacturers specifications ---- Including all lead lifts loading unloading...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass
single hole basin mixer of approved quality and make, including painting
of fittings and brackets, cutting and making good the ...
Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete wor...
Providing and fixing Liquid soap dispenser made of Stainless steel with all
concealed fitting arrangements & all necessary accesories complete - Class Premium ---- Including all lead lifts loading un...
roviding and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 g. ---- Including all lead lifts loading unloading transportation labou...
Providing and fixing Single lever sink mixer with swivel spout top
outlet wall mountable made of Stainless steel with all concealed fitting
arrangements & all necessary accesories complete - Class -...
Stainless steel sink - with drain board bowl depth 250 mm ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of ...
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long,
200 mm wide with minimum distances of 37 mm from wall face with
concealed fittings arrangement of approved quality and colour, wei...
UPVC pipe IS 16098 SN 8 - 315mm dia ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all material and all o...
Providing and fixing square-mouth S.W. gully trap class SP-1 complete
with C.I. grating brick masonry chamber with water tight C.I. cover 180
x 150 mm size P type & With Non Modular common burnt cla...
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 600X850 mm internal ...
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nomin...
Gunmetal non-return valve-vertical (screwed end) 80 mm dia ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of...
Supply, installation, testing & commissioning of diesel engine driven pump,horizontal mounted, Horizontal spiltcase centrifugal single stage pump,capable of delivering required flow at required head w...
Supply, installation, testing and commissioning of diesel engine driven pump,horizontal mounted, Horizontal spiltcase centrifugal single stage pump,capable of delivering required flow at required head...
Supply, Installation, testing and commisioning electrically driven jockey pump of capacity 180.0 Lpm at required head end suction type bronze impeller pump oupled to electrical driven motor with suita...
Supply, installation, testing & commissioning of diesel engine driven pump,
horizontal mounted, Horizontal spiltcase centrifugal single stage pump,
capable of delivering required flow at required head...
Supplyinganddrawing3coreflatPVCsheathedsubmersiblepumpcablemanufacturedwithelectrolyticgradecopperwithflexiblecopperwithlowresistanceconductorconfirmingto13:8130-1984andvirgingradePVCinsulationandpowd...
SupplyinganddrawingFlexibleMulticoreCablemanufacturedwithelectrolyticgradeflexiblecopperwithlowconductorconfirmingtoIS8130-1984and(Virgin)PVCinsulationsheathedsuitableforworking voltage upto 1100 Volt...
SupplyinganddrawingFlexibleMulticoreCablemanufacturedwithelectrolyticgradeflexiblecopperwithlowconductorconfirmingtoIS8130-1984and(Virgin)PVCinsulationsheathedsuitableforworking voltage upto 1100 Volt...
SupplyinganddrawingFlexibleMulticoreCablemanufacturedwithelectrolyticgradeflexiblecopperwithlowconductorconfirmingtoIS8130-1984and(Virgin)PVCinsulationsheathedsuitableforworking voltage upto 1100 Volt...
GI/Copper strips for grounding connections, using necessary fixing
materials as required. 600 x 600 x 3 mm Copper plate ---- Including all lead lifts loading unloading transportation labour hire charg...
Supplying,installing,testingandcommissioningofPN16CIbutterflyvalvesofconfirmingtoIS13039withnecessarynuts&boltsetc.,complete-etc.,completeasperspecificaitonwithallleadandlift,loadingunloading,labour,h...
Supplying,installing,testingandcommissioningofPN16CIbutterflyvalvesofconfirmingtoIS13039withnecessarynuts&boltsetc.,complete-etc.,completeasperspecificaitonwithallleadandlift,loadingunloading,labour,h...
Supplying,installing,testingandcommissioningofPN16CIbutterflyvalvesofconfirmingtoIS13039withnecessarynuts&boltsetc.,complete-etc.,completeasperspecificaitonwithallleadandlift,loadingunloading,labour,h...
Supplying,installing,testingandcommissioningofPN16CIbutterflyvalvesofconfirmingtoIS13039withnecessarynuts&boltsetc.,complete-etc.,completeasperspecificaitonwithallleadandlift,loadingunloading,labour,h...
Supplying,installing,testingandcommissioningapprovedmake.C.I.GatevalvesasperIS:780/14846withflanges,bolts,nuts,washers,gasketsetc.complete-etc.,completeasperspecificaitonwithallleadandlift,loadingunlo...
Supplying,installing,testingandcommissioningapprovedmake.C.I.GatevalvesasperIS:780/14846withflanges,bolts,nuts,washers,gasketsetc.complete-etc.,completeasperspecificaitonwithallleadandlift,loadingunlo...
Supplying,installing,testingandcommissioningapprovedmake.C.I.GatevalvesasperIS:780/14846withflanges,bolts,nuts,washers,gasketsetc.complete-etc.,completeasperspecificaitonwithallleadandlift,loadingunlo...
Supplying Installing, testing and commissioning of Gun metal BALL
VALVE SIZE OF 19/20mm dia including cost of materials, labour, usage
charges of machinery complete as per specifications. Complete19/2...
Supplying Installing, testing and commissioning of hydraulically operated sprinkler Gong Valve with water meter gong bell and trims as required, pressure gauges drain Valve, ball Valves check valve, s...
Supplying,installing,testingandcommissioningofPN16CIbutterflyvalvesofconfirmingtoIS13039withnecessarynuts&boltsetc.,complete-etc.,completeasperspecificaitonwithallleadandlift,loadingunloading,labour,h...
Supplying,installing,testingandcommissioningofPN16CIbutterflyvalvesofconfirmingtoIS13039withnecessarynuts&boltsetc.,complete-etc.,completeasperspecificaitonwithallleadandlift,loadingunloading,labour,h...
Supplyinginstalling,testingandcommissioningofPN16CI"NonReturnValve"confirmingtoIS13039withnecessaryboltsandnutsetccompleteincludescostofallmaterialslabourchargeswithallleadliftloadingandunloadingtrans...
Supplyinginstalling,testingandcommissioningofPN16CI"NonReturnValve"confirmingtoIS13039withnecessaryboltsandnutsetccompleteincludescostofallmaterialslabourchargeswithallleadliftloadingandunloadingtrans...
SupplyingandfixingofFireductShutterfabricatedoutofM.S.sheetandframe,doorshallbefixedwith4mmthickGlass,suitableRubberbeadingandLockingarrangement.Rateshallbeincludesallfastenersetc,andcompleteshuttersh...
Supplying Installing, testing and commissioning of 150mm dia 4 way Fire
brigade inlet connection with Non retrn valve of 4 nos. 63 mm dia.
including cost of materials, labour, usage charges of machin...
Providing ABC Powder based MAP 50, 1Kg
Supply, installation of 1kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 2.3 Kg,empty weight 1.3 Kg, C...
Providing ABC Powder based MAP 50, 1Kg
Supply, installation of 1kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 2.3 Kg,empty weight 1.3 Kg, C...
Supply,installationof4kgFireExtinguisherMonoAmmoniumPhosphatePowder50,StoredPressureType,PressureGauge,GrossWeight6.9Kg,emptyweight2.9Kg,CanHeight440MM,Diameter140MM,DischargeTimelessthan13Sees,Contro...
SupplyingInstalling,testingandcommissioningofGunmetalBranchpipesizeof63mmdiax19mmdiaasperIS903completeincludingcostofmaterials,labour,usagechargesofmachinerycompleteasperspecifications. ---- Including...
SupplyingInstallingofConsealedType,StandardResponseStandardCoverage,Sprinkler,K5.6(80),1/2”NPT,68DegreeC,Chromefinish,ULlisted. ---- Including all lead lifts loading unloading transportation labour ...
SupplyingInstalling,testingandcommissioningofhydraulicallyoperatedsprinklerGongValvewithwatermetergongbellandtrimsasrequired,pressuregaugesdrainValve,ballValvescheckvalve,straineretc.includingcostofma...
SupplyingInstalling,testingandcommissioningofP.A.SystemconsolepanelwithpushbuttonwithspeakerandindictoronAccomdatedinM.S.Cabinetwithpaintingincludingcostofmaterials,labour,usagechargesof machinery com...
P.A.Systemamplifier250WRMSoutputwithcompletewiringandcontrols accessable form front ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete ...
SupplyingInstalling,testingandcommissioningofPublicaddresssystem(Twowaycomminicationtype)asperrequirementofFireForceauthorityandwhichGenerallycompriseofSupplyingInstalling,testingandcommissioningofApp...
Telephone Instrument Push Button Telephone ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all material an...
Construction of Embankment by excavating the available approved Gravel/
Murrum deposited at a place or borrow pits during or prior excavation with all
lifts and lead, transportation to site, spreading...
Loosening, leveling and Compacting original ground supporting
embankment to facilitate placement of first layer of embankment,
scarified to a depth of 150 mm, mixed with water at OMC and then
Providing, laying, spreading and compacting graded stone aggregate to Wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and laying 100mm thick factory made precast M -40 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions more than 10MSA upto 20MSA f...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregate as per relevant IS Codes machine mixed with super...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
8.10 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and remov...
8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldi...
8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as p...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
8.28 Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, d...
8.29 Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an ...
11.5.1 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying ...
8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work afte thoroughly brooming the surface to remove all dirt, dust, mortar drops and...
7.3 Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. inc...
7.12 Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at ...
Rain water Recharge pits
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils&upto depth notexceeding 300mmasper drawingand technica...
Earth work in surface excavation for stripping, seating of bund, Road
way by manual means for lowering & levelling the ground for all works
other than foundation & depth in Ordinary rock and soft ro...
Providing and laying in position plain cement concrete for levelling courseforallworksinfoundation.The granite/trap/basalt crushed gradedcoarseaggregates andfineaggregates asperrelevantIS Codes machin...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1cement
:6 coarses and :12 graded stone aggregate 20 mm nominal size)upto p...
Boulder 50 mm to 200 mm (V-2,/P.No.A-14, SL.NO-077) ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all ma...
Sand - M-Sand (V-1,/P.No.A-40, SL.NO-64) ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all material and ...
20mm downsize (V-1,/P.No.A-38, SL.NO-4) ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all material and a...
Stone Boulders 300mm (V-1,/P.No.A-40, SL.NO-80) ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all materi...
Internal electrification works & external electrification works, DG Works, Transformers works, lifts etc.
POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying & Wiring adopting loop system in existing pvc conduit/casting caping using copper Pvc insulated multi stand 2x1.5Sqmm copper ...
POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying & Wiring adopting loop system in existing pvc conduit/casting caping using copper Pvc insulated multi stand 2x1.5Sqmm copper ...
POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying & Wiring adopting loop system in existing pvc conduit/casting caping using copper Pvc insulated multi stand 2x1.5Sqmm copper ...
POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying & Wiring adopting loop system in existing pvc conduit/casting caping using copper Pvc insulated multi stand 2x1.5Sqmm copper ...
POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying & Wiring adopting loop system in existing pvc conduit/casting caping using copper Pvc insulated multi stand 2x1.5Sqmm copper ...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multtis and copper conductor single core cable in consealed system of wiring.(group A materials). With specified IS-6...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multtis and copper conductor single core cable in consealed system of wiring.(group A materials). With specified IS-6...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multtis and copper conductor single core cable in consealed system of wiring.(group A materials). With specified IS-6...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multtis and copper conductor single core cable in consealed system of wiring.(group A materials). With specified IS-6...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multtis and copper conductor single core cable in consealed system of wiring.(group A materials). With specified IS-6...
Supplying and flush mounting power coated metal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting in bricks/ stone/c.c wall. 1-3Way ----...
Supplying and flush mounting power coated metal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting in bricks/ stone/c.c wall. 4-5Way ----...
Supplying and flush mounting power coated metal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting in bricks/ stone/c.c wall. 6 Way ---- ...
Supplying and flush mounting power coated metal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting in bricks/ stone/c.c wall. 8 Way ---- ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of metal clad industrial plugs and sockets Plugs 2 pole + earth 250V - 16 Amps ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curi...
Supplying and fixing of metal clad industrial plugs and sockets Plugs 3 pole + earth 440V - 32 Amps ---- Including all lead lifts loading unloading transportation labour hire charges of machinery cur...
Supplying and fixing of metal clad industrial plugs and sockets Socket 2 pole + earth 250V - 16 Amps ---- Including all lead lifts loading unloading transportation labour hire charges of machinery cu...
Supplying and fixing of metal clad industrial plugs and sockets Socket 3 pole + earth 440V - 32 Amps ---- Including all lead lifts loading unloading transportation labour hire charges of machinery c...
Supplying and fixing of modular switch & connected accessories on
existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch ---- Including all lead lifts loading unloading t...
Supplying and fixing of modular switch & connected accessories on
existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket ---- Including all lead lifts loading unloading...
Supplying and fixing of modular switch & connected accessories on
existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch ---- Including all lead lifts loading unloading ...
Supplying and fixing of modular switch & connected accessories on
existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch ---- Including all lead lifts loading unloading trans...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket ---- Including all lead lifts loading unload...
Concealed conduit System: Supplying 20/25/32mm dia 2mm 2.5mm thick heavy gauge PVC conduit pipe with suitable size bends, Metal / PVC juction boxes adhesive paste etc., and runnning before connect...
Concealed conduit System: Supplying 20/25/32mm dia 2mm 2.5mm thick heavy gauge PVC conduit pipe with suitable size bends, Metal / PVC juction boxes adhesive paste etc., and runnning before connect...
Concealed conduit System: Supplying 20/25/32mm dia 2mm 2.5mm thick heavy gauge PVC conduit pipe with suitable size bends, Metal / PVC juction boxes adhesive paste etc., and runnning before connect...
Open Conduit System Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , an...
Open Conduit System Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , an...
Open Conduit System Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , an...
Groove cutting : Supplying ..... dia 2mm/2.5thick heavy gauage PVC conduit pipe with bends, Metal juctions boxes adhesive paste etc. and bracing U or J hooks and cement plastering up to the surface ...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by br...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by br...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by br...
Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- Including all lead lifts load...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 15" Sweep (450 mm) ---- Including all lead lifts loading unloading transp...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. ---- Includ...
Fabricating supplying and mounting MS box made out 14 SWG suitable for Floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged fronth cover, equipped...
Supplying, fixing and wiring 1000/5A to 1600/5A 15VA Burden class 1 Current Transformer ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concr...
Supplying, fixing and wiring 50/5 to 400/5 Amps 5VA burden current transformer. Class 0.5 acurrcy with tape wound. ---- Including all lead lifts loading unloading transportation labour hire charges of...
Supplying and fixing of LED type panel board indicating lamp. ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...
Supplying…… Amps rated 3 phase with neutral bus bar using required capacity electronic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which...
Supplying…… Amps rated 3 phase with neutral bus bar using required capacity electronic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which...
Supplying…… Amps rated 3 phase with neutral bus bar using required capacity electronic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with S...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with S...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with S...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with S...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coat...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coat...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. P...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. P...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. P...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. P...
Supplying & Fixing of Rotary handle for MCCB ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all material ...
Supplying and fixing trivictor meter suitable for operation, LT operation and CT operated dual source meter in polycorbonate body in class 0.5 acuuracy as per IS 14697 and completely wired ---- Includ...
Supplying, Fixing and wiring 0 to 600 volts 96x96mm AC volt meter on exixting pannel board ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for c...
Supplying, fixing and wiring rotary selector switch suitable for volt meter ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concr...
Supplying and fixing of 3phase digital ammeter voltmeter ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of a...
Supplying & fixing regular MCB distribution boards on wall/woodenboard/flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacity MECB's single pahse/ 3...
Fixing a shunt capacitor of ... kVAR capacity with necessary clamps,
bolts, and nuts on existing wooden or metal board including banking of more than one capacitor. 11 to 20 kVAR ---- Including all l...
Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factorimprovement of rotating machineries like inducti...
Supply and fixing of 3-pole Capacitor switching contactor with NO/NC contacts and inbuilt damping resistor to protect the contactor and capacitor from highest inrush cu...
Supply and fixing of 3-pole Capacitor switching contactor with NO/NC contacts and inbuilt damping resistor to protect the contactor and capacitor from highest inrush cu...
Supply and fixing of 3-pole Capacitor switching contactor with NO/NC contacts and inbuilt damping resistor to protect the contactor and capacitor from highest inrush cu...
Supply and fixing of 3-pole Capacitor switching contactor with NO/NC contacts and inbuilt damping resistor to protect the contactor and capacitor from highest inrush cu...
Supplying, fixing and wiring Automatic Power Factor controller circuit unit fully, static units controlled by 14 stage microprocessor operation, relay...
Supplying and fixing HRC fuse units base on existing switch / panel board. 6 to 16 A ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete...
Supplying and fixing HRC fuse units base on existing switch / panel board. 32 to 63 A ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concret...
Supplying and fixing HRC fuse link on existing switch fuse base with W loss as per IS-13703. upto 63 A ---- Including all lead lifts loading unloading transportation labour hire charges of machiner...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . Th...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reduce...
Supplying and running of GI/Cu strips for grounding connections,using necessary fixing materials as required. GI Strip 25 x 6 mm GI strip ---- Including all lead lifts loading unloading transp...
Supplying and running of GI/Cu strips for grounding connections,using necessary fixing materials as required. GI Strip 40 x 6 mm GI strip ---- Including all lead lifts loading unloading transp...
Supplying and running of GI/Cu strips for grounding connections,using necessary fixing materials as required. GI Strip 50 x 6 mm GI strip ---- Including all lead lifts loading unloading transp...
Supplying and running of GI/Cu strips for grounding connections,using necessary fixing materials as required. GI Strip 8SWG GI wire ---- Including all lead lifts loading unloading transportati...
Supplying and running of GI/Cu strips for grounding connections,using necessary fixing materials as required. Cu. Strip 25x3mm ---- Including all lead lifts loading unloading transportation la...
Supplying and running of GI/Cu strips for grounding connections,using necessary fixing materials as required. Cu. Strip 25 x 6 mm Copper strip ---- Including all lead lifts loading unloading t...
Supplying and running of GI/Cu strips for grounding connections,using necessary fixing materials as required. Cu. Strip 40 x 6 mm Copper strip ---- Including all lead lifts loading unloading t...
Supplying and running of GI/Cu strips for grounding connections,using necessary fixing materials as required. Cu. Strip 50 x 6 mm Copper strip ---- Including all lead lifts loading unloading t...
Supplying and running of GI/Cu strips for grounding connections,using necessary fixing materials as required. Cu. Strip 600 x 600 x 3 mm Copper plate ---- Including all lead lifts loading unlo...
Fixing of all types of indoor light fittings on call and ceiling and rafters On wall/ ceiling ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for...
Supplying & Fixing of 25x6mm GI strip for grounding of LA system ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and conv...
Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Exc...
Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance
free batteries.-4x150AH ---- Including all lead lifts loa...
Providing and laying of reinforced cement concrete pipe NP2 including pointing ends, fixing collars with cement mortar 1:2 including cost of materials,labour,HOM complete as per specifications. 150mm ...
Supply of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3...
Supply of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3...
Supply of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3...
Supply of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3...
Supply of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3...
Supply of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3...
Supply of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3...
Labour charges for laying of 1.1kV class UG cables in existing trench GI pipe/stoneware pipe/on wall/on pole as required. In existing trench 120qmm to 240sqmm(exact measurement as per site) ---- Incl...
Labour charges for laying of 1.1kV class UG cables in existing trench GI pipe/stoneware pipe/on wall/on pole as required. In existing trench 240sqmm(exact measurement as per site) ---- Including all ...
Labour charges for laying of 1.1kV class UG cables in existing trench GI pipe/stoneware pipe/on wall/on pole as required. In existing trench 4 core 10Sqmm(exact measurement as per site) ---- Includin...
Labour charges for laying of 1.1kV class UG cables in existing trench GI pipe/stoneware pipe/on wall/on pole as required. In existing trench 35 to 95sqmm ---- Including all lead lifts loading unloadi...
Digging of treanch of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete In soil (ordinary) ---- Including all lead lifts loading unloading t...
Providing and filling sand in excavated trench to cover already laid UG cable to a depthh of 150mm all- around the cable ---- Including all lead lifts loading unloading transportation labour hire char...
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 kV class (Metal Only) 25 mm ---- Including all lead lifts loading unloading transportation labour hire charges of machinery...
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 kV class (Metal Only) 32 mm ---- Including all lead lifts loading unloading transportation labour hire charges of machinery...
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 kV class (Metal Only) 40 mm ---- Including all lead lifts loading unloading transportation labour hire charges of machinery...
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 kV class (Metal Only) 45 mm ---- Including all lead lifts loading unloading transportation labour hire charges of machinery...
Supplying and fixing of class A GI pipe 80mm ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete works cost and convene of all material ...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 400 Sq.mm long barrel ---- Including all lead lifts loading unloading transportation labour hir...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 240 Sq.mm long barrel ---- Including all lead lifts loading unloading transportation labour hir...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 120Sq.mm long barrel ---- Including all lead lifts loading unloading transportation labour hire...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 1.5 sqmm ---- Including all lead lifts loading unloading transportation labour hire charges of ...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 2.5sqmm ---- Including all lead lifts loading unloading transportation labour hire charges of m...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 4sqmm ---- Including all lead lifts loading unloading transportation labour hire charges of mac...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 6 sqmm ---- Including all lead lifts loading unloading transportation labour hire charges of ma...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 10sqmm ---- Including all lead lifts loading unloading transportation labour hire charges of ma...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16sqmm ---- Including all lead lifts loading unloading transportation labour hire charges of ma...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 25 sqmm ---- Including all lead lifts loading unloading transportation labour hire charges of m...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 35sqmm ---- Including all lead lifts loading unloading transportation labour hire charges of ma...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 50sqmm ---- Including all lead lifts loading unloading transportation labour hire charges of ma...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 70sqmm ---- Including all lead lifts loading unloading transportation labour hire charges of ma...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 95sqmm ---- Including all lead lifts loading unloading transportation labour hire charges of ma...
Constructing water tight 450x450x750mm(depth) size brick masonary inspection chamber ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete...
2 mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. 600 x 50 mm ---- Including all lead lifts loading unloading trans...
2 mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. 750 x 50 mm ---- Including all lead lifts loading unloading trans...
Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs w...
Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs w...
Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs w...
Supplyingof.....feet-PVC Batten with integrated LEDtube....W with high quality diffuser with Life of 25000 burning hours & 70%lumen maintenance with CRI higherthan 80.PowerInput:220-240V@50/60Hz & Pow...
Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK08 impact resistance suitable for surface and wall mounting applications. ---- Including all lead lifts loading unloading transpo...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- Includi...
Design, supplying, erecting testing and commissioning of - Passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine ...
Design, supplying, erecting testing and commissioning of - Passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine ...
Supplying, erection, testing and commissioning of AMF Panel suitable for 500kVA DG set ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for co...
Supplying & Fixing of MS pipe with 200mm Dia with collar for DG exhaust of ESCOM SR ---- Including all lead lifts loading unloading transportation labour hire charges of machinery curing for concrete ...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3 phase, 4 wire LT network with ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw-4 11232 BBC 25.07.2024.docx
Tender Document • 1.64 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .