Special repairs to toilets at various locations, Provn of Misc E/M works, Provn of operator room near bldg No. P-06(Block I) and Addn / Altn to garbage bins at

Amount

Excavation in trenches, n exc 1.5m wide and 1.5m in depth for foundation etc in any type of soil all as specified and as directed.

M & L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete all as specified and as directed.

M & L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in 1:6 cement mortar all as specified and as directed.

Returning, filling in, excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm in any type of soil all as specified and as directed.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed.

M & L hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and as directed.

M & L 75mm thick Cement concrete type D2, 1:4:8 (40mm graded aggregate) as in sub base all as specified and as directed.

M & L 25mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor all as specified and as directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L rendering 15mm thick on brick or concrete surfaces in CM 1 : 6 finished even and fair without using extra cement all as specified and as directed.

M&L for (300mm x 200mm) x 6 to 7 mm thick coloured glazed ceramic tiles as in skirting/dado set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 10mm thick bedding layer in CM 1:6 complete all as specified and directed.

M & L for preparing surface and applying two coats of cement base paint on new plastered surfaces on wall all as specified and as directed.

M & L cement concrete 75mm thick type C2 1 : 3 : 6 ( 40mm graded aggregate) as in plinth protection all as specified and as directed.

M & L for providing cement concrete 1 : 2 :4 type BO, using 12.5mm graded stone aggregate as in channeling, benching & copings, and the like including weathering, slightly rounded or chamfered angles and throating, with necessary form work as required & all as directed.

S & F Welded steel wire mesh fabric of size 25 mm x 25 mm x 2 mm thick as approved by GE.

S & F rolled mild steel framed work as in doors or gates of angle or other section confirming to Fe 410 - W, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete.

S & F 1.25mm thick mild steel, plain, black sheet in wall cladding, steel gates, etc., cut to size, holes punched including rounded headed screws, clout nails or revets and fixed to wood or steel framing or fixing to MS clamps with necessary bolts and nuts with plain 40mm lap joints welded to frame all as specified and as directed.

S&F mild steel butt hinges heavy weight cold rolled 125mm size

S&F mild steel sliding door bolt plate type black jappaned with bright bolt not less than 12 mm dia with and including 6 bolts and nuts four o bolt plate and two on staple 250 mm long all as specified and as directed.

M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 exceeding one brick wall and not exceeding two brick wall all as specified and as directed.

S&F mild steel flat as in hold fast , wall ties angle cleat for security purline to wood trusses conforming to Fe 410 - 0 or Fe - 310 - 0 all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars, walls etc. all as directed.

Dismantling Structural steel work including doors, gates but excluding framed truss etc. all as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness below or above ground level all as directed.

M & L Chequered cement concrete tiles 20cm x20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors,With grey cement and pigments including 15 mm thick screed bedding in CM 1:6 all as specified and as directed.

Excavation in trenched not exc 1.50 m wide and not exc 1.50 mtr deep and getting out in soft/loose soil all as specified and as directed.

M&L RCC Type B1 (1:2:4) using 20mm graded agg in fdn,incl rafts, footing,foundation beams,bases for column, plinth beam etc all as specified and as directed.

M&L RCC Type B1 (1:2:4) using 20mm graded agg in column,pillers etc all as specified and as directed.

M&L RCC Type B1 (1:2:4) using 20mm graded agg in Beam, lintels over 1.5 mtr span etc all as specified and as directed.

S&F MS TMT bar 5mm dia and over upto and including 10mm dia , as in stirrups, spacers, cut to length, bent to shape required, including cranking, binding spiraly for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

S&F MS TMT bar 10mm dia and over, cutto length, bent to shape rewquired, including cranking, binding spiraly for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

S&F Rolled mild steel in rolled section as in main and cross beam, hip and jack rafters, purlins where connecting to common rafter Fe410 W Gde-E-250 Quality A all as specified and as directed.

M&L form work to side of concrete column, footing, base of column ,plinth beam etc similar work d similar work for rough finished surface of concrete all as specified and as directed.

M&L form work to side and soffits of floor or roof beams, lintels etc all as specified and as directed.

M&L form work to side of pillers,post, column etc all as specified and as directed.

M&L PCC in sub base 100 mm thick type D2 1: 4: 8 (40mm graded aggregate) all as specified and as directed.

M&L PCC 1:2:4 type B1 40 mm thick (using 20 mm graded aggregate) as in flooring, finished even and fair with using extra cement all as specified and as directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

M&L rendering 15mm thick in two layer 1st 5mm thick in CM (1:6) and 2nd 10mm thick in CM (1:4) with waterproofing compound on other than fair faces of brick work or concrete surfaces finishing surfaces fair and even all as specified and as directed.

S&F 2nd class hard wood for plain solid straight chowkats and framed wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and as directed.

S&F steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed all as specified and as directed.

S&F 35 mm thick 2nd class HW plain framed panelled shutter (any numbers of panels ) with panels of timber flat on both sides (feather edged) or veneered particle board medium density, wood partical board with commercial face veneers fitted to frame all as specified and as directed.

S&F 200 mm size Aluminium anodised, barrel tower bolt of extruded section all as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast of extruded section and fixed bolts of extruded section or cast aluminium alloy 250 mm long all as specified and as directed.

S&F 100 mm size mild steel butt hinges medium weight , cold rolled and fixed all as specified and as directed.

S&F 125 mm size Aluminium handles, cast type anodised all as directed.

S&F 3mm thick glass pan ordinary quality and glazing with oil putty in square not exc 0.5 each pane all as specified and as directed.

M&L 2 coat of synthetic enamel painting to wood and wood based material surfaces exc 10cm width or girth over a coat of pink primer including preparation of surfaces all as specified and as directed.

Removing excavated material n exc 100mtr and depositing where directed at a level n exc 1.5 mtr above the starting point all as specified and as directed.

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) as specified and as directed.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) as specified and as directed.

Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed..

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed.

Cutting holes in stone walls built in cement mortoar exc half brick but not exc one brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrrete 1:2:4 type B-1 as required all as specified and directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing all as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom railon either side and as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing.

S & F 125x60mm pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

S & F 105x60mm pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified and directed.

M & L for plain cement concrete Type BO 1:2:4 (using 12.5 mm graded granite stone aggregate) cast in situ in filling to steel frames including use of necessary form work all as specified and as directed.

M&L 35 mm thick second class hard wood plain framed factory made panelled shutters( two panels) with 10 mm bison panel or 12 mm thick veneered particle board with commercial face veneers on both side as panel inserts, styles & rails shall be of second class hard wood timber generally conforming to IS-1003(Part-I) (Door shutters) Kiln seasoned and chemically pressure treated all as directed.

S & F 35 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a).

S&F 100mm long Butt hinges, extruded aluminium ally with galvanished mild steel hinge pin anodised and fixed type B-21

S&F 150 mm size aluminium anodised barrel tower bolt of extruded section .

S&F aluminium anodized handle cast type 150mm size

S & F mild steel ordinary rat tails 300 mm size pattern springs including roller and roller plate complete.

S&F in repair 140mm length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor

M & L 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate ) as in flooring finished even and rough.

M & L for anti skid ceramic tiles coloured of size 300 x 300 x 7 mm thick laid in floors, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in CM 1:6 all as specified and as directed.

M & L for coloured glazed ceramic tiles 300x450x7 mm thick & 300x600x7 , on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match. over and including 15 mm thick rendering/bedding layer in CM 1:4 on brick work /stone masonary or concrete surfaces all as specified and as directed.

M & L for coloured joint free non skid ceramic tiles 7-8 mm thick (square/rectangular), area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floors etc. set and and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) finished even and rough to receive the top layer all as specified & directed.

All as per items No. 71 here-in-before but fixing on vertical surfaces such as skirting/ dado , set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 15 mm thick rendering/bedding layer in CM 1:4 on brick work /stone masonary or concrete surfaces.

M&L Chequered cement concrete tiles rubber moulded 30cm x 30cm x 25mm thick set, jointed and pointed in near cement slurry in floors, with grey cement and pigments over and including 15 mm thick screed bedding in CM 1:6 all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar all as directed.

M&L Machine cut cudappah stone slab 20mm to 22mm thick, over and including cement screed bed in CM 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete necessary cutting, notching etc for sink all as specified and as directed.

M&L 20 mm thick Granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms , & like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite over 15 mm thick cement screed/rendering in CM 1:4 including Roughening surfaces of old/new concrete floor/wall by picking,sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.00 kg per sqm all as specified and as directed.

Round chamfering, to the edges of granite exc 15mm wide but not exc 50mm wide on granite stone shelves all as directed.

Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified and as directed.

Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) all as specified and as directed.

M&L Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls,built in CM (1:4) all as specified and as directed.

M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed

Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper complete all as specified & directed.

M&L for preparing new plastered surface on wall and aplying two coats of cement based paint over one coat of alkali resistant priming paint all as specified and directed.

Complete removal of existing treatment of walls by steel wire brushing, preparation of surfaces and applying two coats of distemper oil emulsion after chalk whiting all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment of ceiling by steel wire brushing, preparation of surfaces and applying three coats of white wash on ceiling all as specified and directed by Engineer-in-Charge.

S & F anodised aluminium frame for door, window and ventilator with one or more rebates including jointing cleat for fixing etc with powder coating complete all as specified and as directed.

S&F Anodized aluminium powder coated window and ventilator shutters, glazed/gauzed shutter having stile and rails with triangular aluminium beading of 15 mm size side hung/sliding type(Two or three track) without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings, such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2 Nos) suitable handle (1 No) complete all as specified and as directed.

S&F 5.5 mm thick frosted sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, orstainless steel wire staples all as specified & directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia all as specified and directed.

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

Refixing of old steel tubing 15 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc all as directed

M&L cutting chases pinning with diamond cutter in brick/stone masonry wall and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

Refixing of old steel tubing 20 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc all as directed

S&F Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, in repairs complete all as specified and directed.

S&F Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia in repair, complete all as specified and directed.

S&F in repair Bib taps for 15 mm bore pipe, cast copper alloy fancy type chromium plated long body with wall flange fixed in repairs of Make - Jaquar , Marc and Johnson complete all as directed.

S & F in repairs Vitreous china wash basin (Oval type ) white of size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread all as specified and as directed.

S&F 15mm bore pillar cock fancy type log body/saw neck type , screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked add if fixed in repairs complete all as specified & directed.

S&F in repair towel rail CP 600 mm long complete all as specified and directed.

S& F in repair CP Shower rose with or without swivel joints, any size,including fixing to steel pipe or union complete all as specified and directed.

S& F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass sheof 12cm wide with chromium plated brackets guard & railing 60cm long all directed.

S&F Liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 105 gms)

S&F in repair Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern (including fixing of flush pipe) including provision of cement concrete bedding, in repair complete all as specified and as directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap, Incl Supply and fixing of PVC seat and cover for pedestal pan complete all as specified and as directed.

S & F health faucet(ABS body) including 0.8mm dia 1.2 mtr long flexible tube and wall hook and MS anodised hanging device Make -Jaquar, Model No-ALD-CHR-593N and equivalent all as directed.

S&F in repair PVC flushing cistern 10 ltr capacity including PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.

S&F Viterous china urinals, half stall type, including CP coupling, waste pipe and all necessary fittings, complete incl providing and fixing plugs , bedding urinal against wall in CM 1:2 , securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement all as specified and directed

PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. Make:Paryag/Polytech

S&F Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 25mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tank of any capacity complete all as specified & directed.

S&F in repair 15 mm size gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15 mm bore.

S&F in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore.

Taking down eaves gutters and rainwater/sewage pipes of any any size or pattern , including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store .

S & F PVC (SWR) pipes, single socketed, in any length, with rubber rings 110 mm dia as in floor/wall

S & F PVC (SWR) pipes, single socketed, in any length, with rubber rings 75 mm dia as in floor/wall

S & F PVC (SWR) vent cowl 110 mm dia

S & F PVC (SWR) bends 110 mm dia

S & F PVC (SWR) vent cowl 75 mm dia

S & F PVC (SWR) bends 75 mm dia

S&F in repair PVC floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified.

S&F in repair 50 mm bore of pipe Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceiling or in floors etc.

M&L for point wiring complete with two single core, PVC insulated, unsheathed, multi stranded bright annealed copper conductor cable, 1.5 Sq.mm 1100 Volts, FR grade drawn through and including heavy duty PVC casing and capping not less than 25 mm width and accessories surface mounted on walls, ceilings etc. on & including PVC board with earth dolly arrangement with surface plate for mounting switches, sockets, regulators etc and one run of 1.5 Sq.mm PVC insulated, unsheathed, multistranded, copper conductor cable FR grade as earth wire and connected to common earth dully complete for the following :-

(a) One 3 pin socket out let 5 Amps on Same board.

(b) One 3 pin socket out let 5 Amps on independent board.

(c) One light point controlled by one switch.

All as per Sl item No. 126 above but with two runs of 2.5 Sq.mm cable and one run of 1.5 Sq.mm cable as earth wire for one 3 pin socket outlet/power point 15 Amps controlled by one switch.

Supply & fix switch piano flush type single pole one way 5 Amp.

Supply & fix switch piano flush type single pole one way 15 Amp

Supply & fix Socket out let 2 in 1, 5 pin 5 Amps flush type.

Supply & fix Socket out let 2in1,3 pin 5 and 15 Amps flush type.

S&F ceiling rose,3 phase/ PVC /polycarbonate isolated body,65x50 mm two to three terminals

S&F lamp holder PVC/ Poly carbonate type with back plate suitable for batten fitting SP 230 Volts

S & F in repairs and connecting up LED light fittings 1x18/20 watt 4 feet long complete with LED rode 18/20 watt, spring loaded rotary holder, connector etc. complete and connecting up with and including 23/00.0076 size 3 core copper flexible wire from connector to ceiling rose/adoptor including all necessary fixing arrangements complete. Crompton fitting DMLN1LT8-16, 1X18/20W and LED rode LT8-20-865-2 or equivalent make approved by HQ CESC Pune as approved by GE.

S&F exhaust fan 230Volt 300mm sweep with all connection arrangements & necessary nut bolts, lauvers etc including wall cutting and making good disturbed surfaces if necessary & connecting with flexible wire of size 23x0.0076 for connecting up to ceiling rose all as directed by the engr in charge. Make: Havells (Model: Ventilair DB Neo, single phase or equivalent make approved by CESC Pune as approved by GE.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI wire 4 mm dia through GI pipe 15 mm dia light grade by means of bolts,nuts, check nuts and washers of galvanised iron or steel,with adequate quantity of charcoal and salt, proper watering arrangements including 20 mm dia medium grade GI tubing.PCC chamber,Chamber Cover all as shown in electrical plate no 3 of SSR part I 2009 connected to earthing test point all as specified or indicated and testing on completion.

Supply and fix LT XLPE insulated & PVC heavy duty armoured cable 1100 volts grade UG multi stranded aluminium conductor electric cable cross sectional area 6 Sqmm 2 Core including necessary connection with provision of lugs & cable gland fixing arrangements all as specified and directed.

Supply & fix Bulk head fittings environment friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs,complete all s specified & as directed by engineer-in-charge. Make: Crompton Cat no.LBHE-10-CDL or equivalent of crompton/wipro/Bajaj or equivalent make approved by HQ CESC Pune as approved by GE.

S&F security light fittings 40 watt LED energy saving, environmental friendly long life versatile die cast aluminium housing with 10 KV external SPD with high power LED and acessories fixed on new GI pipe braket fixed on poles/wall and connection with PVC aluminium 1.5 sqmm 3 core cable etc complete all as directed. make: Crompton Cat Part No: LSTS-40-CDL or equivalent in Philips, Havells, wipro or equivalent make approved by CESC Pune as approved by GE.

S&F power shield (mini MCB with enclosure) with DP, 32 Amp single phase 240 volts including making connection complete all as specified.Make: Standard: cat.no. DSMPCDPA032 or equivalent in HQ CESC Pune approved make as approved by GE.

Taking down carefully aluminium/copper point wiring (light,fan,socket power etc) on TW batten/PVC casing capping, surface steel/PVC conduit including all fitting/fixtures and making good disturbed surfaces of wall/floor/ceiling etc to match the adjoining surfaces all as directed by Engr-In-Charge.

SHREE SAMARTH SERVICES