REPAIR TO INTERNAL PERIODICAL FLOORING FALSE CEILING PLUMBING ROOF TREATMENT AND OTHER MIS WORKS IN OTM ACCN OF DELHI CANTT ATC ESD AND FOL DEPOT IN AOR OF AGE BR II UNDER GE NORTH DELHI CANTT 10

Amount

Demolition of brick/stone masonry built in CM. all as specified and directed by Engineer-in- charge

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in CM (1:6), complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 but except bricks all as specified and as directed .

Taking down cement or cement lime plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick Ready mix Cement Plaster on faces of brick work or concrete surfaces in CM 1:4 mixed with water proofing compound finished even and smooth without using extra cement complete all as specified. (Water proofing compound shll be measure and paid separatelly).

M&L for preparation of new plastered surface of external wall and making the surface smooth with sand paper and priming the surface wih alkali resistance priming paint for external surface for our primed surface applying two coat of cement base paint including curing complete all as specified.

M&L for rendering 15mm thick on faces of brick work surfaces in cement mortar 1:6, finished the surface even and smooth without using extra cement all as directed and specified.

M&L prepartion of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer and 3mm thick of wall care putty of make birla/JK, all as specfied and directed.

M&L for rendering 5mm thick cement plaster in CM(1:3) on concrete surface as in ceiling/chajja and rainforced cement concrect surfaces (Up to 6 mtr height )

M&L for preparation of new plastered surfaces as on ceiling and applying two coats of white wash, complete all as specified and directed. (Up to 6 mtr height )

Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L 40 mm thick plain cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggregate) as in floors finished even and smooth using extra cement all as specified.

Supply only glass diving strips 3 mm thick and 38mm width inserted in position, confirm to design, complete all as specified and directed.

Material and labour for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate, 75mm thick as in plinth protection/pavment and the like, finish the surfaces even and fair without using extra cement all as directed and specified

M & L Machine precast colour concrete decorative interlocking paver block of a with grey cement and pigment any shape and size confirming to IS15658-2006 of 60mm thickness M-35 Gde complete all as specified.

M & L sand filling under floors including watering and consolidation, complete all as specified and directed.

M/L cement concrete type B-1, 1:2:4 using 20mm graded aggregate in kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Taking down chowkhats or frames with shutters n.exc 1.5 sqm each (without taking off shutters from the frame) all as directed.

Taking down chowkhats or frames with shutters exc 1.5 sqm but n.exc 4sqm each (without taking off shutters from the frame) all as directed.

Taking down shutters exc 1sqm but not exc 2 sqm each all as directed.

S&F framed work as in doors or gates of angle or other section with gusset plates,rails,braces, etc.,complete drilled for fixing of steel sheeting in or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete, all as specified and directed

S&F steel windows with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing/gauging bars, dovetailed or welded.complete all as specified.

Taking down door shutters of any description exceeding 1 square metre and not exceeding 2 square metre each easing, and adjusting as required and re-fixing in same opening including renewal of screws complete , all as specified and directed by Engineer-in Charge.

S&F MS bars as in window guard bars welded to steel window frame or fixed to wooden frame all as specified and directed.

Supply and fix 30mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for securing wire cloth etc,all as specified and directed.

S&F 30 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F35 mm thick 2nd class hardwood plain framed panelled shutters (two panel ) with lock rail and panels of 9mm CWR plywood. The size of rail and stile as per IS 1003 (Qart I), klin seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing of aluminium door powder coated of extrusion aluminium section, consisting of frame vertical and horizontal members of size 100mmx45mmx2.5mm thick with shutter style 85mm x 45mm x2.50mm thick, Top, middle and bottom rial of size 101.60mmx44.50 and meeting style 47.50mmx44.50mm thick with 5.50mm thick tinted sheet glass of modi guard/Atul or 6mm this aluminium board with aluminium bedding and rubber gasket/beading including fixing of hydraulic floor spring one in single leaf or two nos in double leaf door of Make Kelvin/Evershine. One mortice lock for aluminium door (each) and two aluminium tower bolts for each door with suitable door handle ornament type with hinges 100 mm long complete . Fixed with rawl plug including rectification of floor/wall to match the existing surfaces all as specified and as directed by Engineer-in-Charge at site. Note: 5.5mm thick tinted glass or 12mm thick prelaminated particle board will be measured and paid for separetetly under repective items.

Supply and fix aluminum powder coated three track sliding window with frame and two no's glazed shutter and one no's gauzed shutter/Ventilator shutters side hung type with or without sash bar, locking rails, locking arrangements with frames including necessary joinery, cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws, suitable handle, tower bolt, hinges and glazing of 5.5mm thick size. Size of top rail, bottom rail shall be 44.45mmx44.45mm and size of frame shall be 65mmx44.45mm and thickness of aluminum 2.50mm thick complete all as specified in MES SSR-1991, Part-I complete all as specified and directed. Note:5.5mm thick tinted glass or wire mesh will be measured and paid for separetetly under repective items.

S&F glazing of tinted glass 5.5mm thick in aluminium door window shutters and partitions etc with PVC/neoprene gasket etc Complete all as per specified and directed by Engr-in-Charge.

S& F in repair for powder coated aluminium grill of powder coating of minimum 50 micron with aluminium mesh of size 50x50mm with square tube solid 6mm thick including aluminium channel of size thickness of channel 1.5mm complete all as specified and directed.

Supply and fix door closer hydraulically regulated,of aluminium(Die cast) body universal type suitable for door shutters 851 to 1000mmin width and weight between 38 to 60kg of Hydraulic door closer complete all as specified and directed.

S & F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, as specified.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. all as specified and directed

S&F 100mm long aluminium barrel tower bolt complete all as specified and directed.

S&F 100mm long aluminium pressed handle complete to fix complete all as specified and directed.

S&F 300 mm length Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismentled portion in CM 1:3 or cement concrete 1:2:4 type B-I as required, Exc half brick but not exc one brick wall.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing the serviceable tiles to store and rubbish off the premises etc complete all as specified and directed..

M&L for glazed ceramic coloured tiles of size350 X 250 X 7mm / 450 X 300 X 7mm thick on vertical surface such as dado, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including layer 10mm thick in cement mortar 1:4 complete all as directed and specified

'M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/rectengular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, over 15mm thick screed bedding layer of mortar in CM 1:6 for laying floor finish complete all as specified and directed.

M&L for Vetrified Ceramic light shade tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, over 15mm thick screed bedding layer of mortar in CM 1:6 for laying floor finish complete all as specified and directed. .

'M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/rectengular) area in vertical surface as skirting/dado of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, and including layer 10mm thick in cement mortar 1:4 complete all as directed and specified

M&L for Vetrified Ceramic light shade tiles 10 mm thick (Square/rectangular) polished area in vertical surface as skirting/dado of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, and including layer 10mm thick in cement mortar 1:4 complete all as directed and specified .

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)E53:E54

S&F PVC (SWR) pipes single socketed 110 mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge.

PVC (SWR) bends of 110 mm radius complete all as specified and directed by Engr-in-Charge.

S&F butt hinges med weight cold rolled MS, size 100 mm complete all as specified and directed.

S&F butt hinges med weight cold rolled MS, size 125 mm complete all as specified and directed.

S&F 150mm long Mild steel barrel tower bolts, stove enamellled black, with bright bolt and fixed complete all as specified and directed.

S&F 150mm long Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S & F 300 mm long Mild steel sliding door bolts plate type, store enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F in repairs Galvanised stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

M&L Taking down cement plaster from other than fair faces of any description from brick, stone walls or concrete surfaces including raking out joints, hacking for key,scrubbing down with water , rendering 15mm thick in cement mortar 1:6,mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats and finished the surface even and fair without using extra cement complete all as specified and directed. Note- PD proof 101 LW(+) and super latex 302 shell be measured and paid seperatly

Supply only PD proof 101 LW (+) of Dr Fixit or eqe. complete all as specified.

Supply only super latex 302 of Dr Fixit or eqe.complete all as specified.

S&F in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls and ceiling or laid in floor incl taking down all as specified.

S&F in repairs 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls incl taking down all as specified.

M&L for Cutting chases, pinning in Brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and ctting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

M&L for prepration of old surfaces by Complete removal of existing treatment & levelling of wall surface and applying two coats of Oil Bound Distemper over a coat of primer over 3 mm thick wall care putty on surface of wall. complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying one coats of oil bound distemper including preparation of old surfaces by brooming down or steel wire brushing , scraping down smoke suit , moulds, moss,efflorancr salt , trading oil and greasy spot complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying two coats of oil bound distemper including preparation of old surfaces by brooming down or steel wire brushing , scraping down smoke suit , moulds,filling gaps wth wall care putty, complete all as specified and directed.

M&L for preparation of old decorated previously treated surfaces of wall by brooming down scrapping down smoke and efflorescent salts etc and applying one coat of white wash on walls complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down scrapping down smoke and efflorescent etc. complete and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying one coats of oil bound distemper including preparation of old surfaces by brooming down or steel wire brushing , scraping down smoke suit , moulds,filling gaps wth wall care putty, complete all as specified and directed.

S&F in repairs Stainless Steel Curtain Rods of 20 mm dia incl brackets , side stop complete all as specified and directed.

M/L preparation of new wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of primer all as directed and specified.

M/L preparation of old wooden surfaces of any description over 10cm width or girth and apply one coats of synthetic enamel paint all as directed and specified.

M/L preparation of old steel surfaces of any description over 10cm width or girth and apply one coats of synthetic enamel paint .

Material and labour preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Dismantaling wrought iron or mild steel work of any description not otherwise provided for all as specified and direcred.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) ,round or square pipes including distance pieces etc.all as specified and direcred.

Dismantling asbestos cement (corrugated, semicorrugated etc) sheet in roof coverings including ridges,valley gutters etc complete all as directed and specified.

S&F 6mm thick AC corrugated or semi corrugated sheets in roofs, walls etc fixed with L type or J type or cranked hook bolts and washers in roof complete all as specified.

S&F 6mm thick Asbestos cement two piece serrated ridge , suitable for corrugated or semi corrugated sheet

Dismantaling plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern roof covering all as specified and directed..

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, ridges, velly gutters fixed with self tapping screws complete all as specified and directed.

S&F in repair 2mm thick fibre glass reinforced translucent plain/corrugated sheeting with two corrugation side lape fixed L type or J type or cranked hook bolts and washers in roof complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets, Frame work etc all as specified and directed.

S&F GI powder coated frame work of size 605 x 605 mm, for celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre , hanging with 6 mm dia GI Hanger , complete all as specified and as directed.

M & L 4 mm thick size non asbestos fibre cement building boards fixed or laid / inserted to timber/ GI / Aluminiumframe work with screws complete all as per manufacturers instructions and as directed.

Complete removal of old roof treatment including cement mortar bedding and removing debries out side MOD land ,( except mudfushka) , complete all as specified and directed.

M&L for 15 mm thick cement plaster over the concrete / brick roof surfaces in cement mortar 1:4 mixed with liquid water proofing compound @ 200ml per bag WPC (liquid type) , surface finished even and smooth without using extra cement all as specified and directed. Note :- Water proofing additive shall be measured and paid separately.

M&L for preparation of roof surfaces ( any type) including removal of grass, small trees by picking sweeping , cleaning and washing down with water to remove dust etc and fix the APP based polymeric water proofing membrane of minimum 3mm thickness & weighing not less than 3.6kg/sqm of approved Make : ( as approved by GE,) black finished reinforced with non-woven poleyster matt. With a thermofusible finish laid over hot bitumen 85/25 grade @ 1.2 Kg/Sqm over bitumenous primer at the rate of 0.40 kg/sqm, torching overlaps with a propane or a butane gas torch with a overlap of 100 mm at the sides and 150 mm at the ends and sealing and Applying a coat of bituminous aluminium paint @ 100 Gm /Sqm over bituminous surface all as per manufacturers instructions complete all as directed and specified by Engr-in-Charge.

Supply only Liquid integral water proofing compound complete all as specified and as directed.Make: FOSROC or equiavalent

Racking out old joints of roof tiles and M&L flush pointing in cement mortar (1:3) mixed with SBR of FOSROC upto depth of 20mm complete including cutting / removing vegetation, complete all as specified and directed.

Taking down rolling shutters of any description and size including anchoring rod, top cover and all fittings complete, including making good the disturbed portion

Supply and fixed Steel rolling shutters ingear operated type with bevel gear box and crank handle ,with 1.25mm lath with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete:

Taking down Industrial steel/ openable sliding shutters of any Size and Type including Channels, rail, cleaning the guide channels etc and greasing /oiling to all moving parts of sliding shutter including straighting the anchoring rod, braket plate for smooth functioning, replacement of damaged/worn out 1.25 mm thick MS steel sheet and re-fixing the sliding shutter with and making good the disturbed portion etc. complete all as directed and specified. (NOTE 1 :- The unit quoted rate deemed to be included for minor repairs , welding and replacements of nut & bolts if required. NOTE 2 :- Material Like Channel , angle rail etc shall be measured and paid in following item given below.)

Supply only guide channel, rails, angle etc suitable for smooth functioning of Industrial sliding shutter of any size including necessary welding to M.S. bracket plate, drilling holes for fixing complete all as directed and specified.

Supply only 150mm dia Cast Iron Wheel Suitable for industrial Sliding door of Approx size 15.00 Sqm ( Appx) complete all as directed and specified.

Supply only safety lever locks mild steel with 4 lever for rolling shutters,complete all as directed.

Supply only ball bearing of approved make, complete all as directed.

Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - 42,665.00

M/S AADI ENTERPRISES

The new hut furnitures

M/S Blues Developers Pvt. ltd

M/S VERMA BUILDER

Paradise Interior

MOHIT ENTERPRISES

Som Nath Kakkar

S GOURAV PRAKASH ENTERPRISES